Military Engineer Services Tender

All as per srl item No. 2 here in before but for one fan point controlled by one switch and regulator complete all as specified and directed.

All as per srl item No. 2 here in before but for one bell point controlled by one bell push complete all as specified and directed.

All as per srl item No. 2 here in before but for one light point controlled by two way switches complete all as specified and directed.

All as per srl item No. 2 here in before but for one socket outlet 5 Amps on independent board complete all as specified and directed.

All as per srl item No. 2 here in before but for one socket outlet 5 Amps on same board controlled with other switch complete all as specified and directed.

All as per srl item No. 2 here in before but with 2.5 Sqmm (nominal area) FRLS cable for one 3 Pin 15 Amp socket on independent board including one 1.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through existing surface/ concealed conduit and accessories and terminated in and including new sunk type pressed steel terminal switch boxes 1.6 mm thick with plastic laminated bakelite sheet top cover 3 mm thick make hylum fixed with nickel polished steel screws with washers and including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for one light point controlled by one switch SP one way.

All as per srl item No. 09 here in before but for one fan point controlled by one switch and regulator complete all as specified and directed.

All as per srl item No. 09 here in before but for one bell point controlled by one bell push button switch complete all as specified and directed.

All as per srl item No. 09 here in before but for one socket outlet 5 Amps on same board controlled with other switch complete all as specified and directed.

All as per srl item No. 09 here in before but for one socket outlet 5 Amps on independent board complete all as specified and directed.

All as per srl item No. 09 here in before but one light point controlled by two way switches complete all as specified and directed.

All as per srl item No. 09 here in before but with 2.5 Sqmm copper (nominal area) FRLS cable for one 3 Pin 15 Amp socket on independent board including one 1.5 Sqmm with stranded copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed.

S&F switch piano flush type 5 Amps, 240 Volt AC single pole, one way complete all as specified and directed.

S&F switch piano flush type 5 Amps, 240 Volt AC single pole, two way complete all as specified and directed.

S&F switch piano flush type 15 Amps, 240 Volt AC single pole, one way complete all as specified and directed.

S&F socket out let 5 Amp, 5 pin flush type complete all as specified and directed.

S&F Socket outlet multi purpose 3 in 1, 6 pin, 5 & 15 Amps, flush type complete all as specified and directed.

S&F Bell push switch flush type 5 Amps SP, 240 volts complete all as specified and directed.

S&F in repair Bell electric AC (Ding Dong) 240 volt SP complete all as specified and directed.

S&F for batton holder insulated body complete all as specified and directed.

Supply & fixing in repair LED retrofit lamp 12 W (TU) 6500K, 220-240v, B-22 base capacity complete all as specified and directed.

S&F for ceiling rose surface type bakelite 65 x 50 mm three terminal complete all as specified and directed.

S&F five step fan regulator, electronic type, single phase, including connection complete after dismantling/ removing unserviceablve regulator complete all as specified and directed.

S&F 18/20 watt LED (4 Ft) batten for surface pendent and conduit mounting high transmissitivity diffuser,high lumen complete with 20W LED tube rod (4ft) including taking down existing light fittings complete all as specified and directed. Note : (i) Contractor shall be provided 2 years written manufacture's guarantee for the LED fixture complete including driver from the certified date of completion.

S&F 10 watt LED (2 Ft) batten for surface pendent and conduit mounting high transmissitivity diffuser,high lumen complete with 10W LED tube rod (2ft) including taking down existing light fittings complete all as specified and directed. Note : (i) Contractor shall be provided 2 years written manufacture's guarantee for the LED fixture complete including driver from the certified date of completion.

S&F in repair energy saving bulk head luminaries with opal diffuse LED 10 watt 6500 K power factor more than 0.90 IP-65 class-I protection with high efficiency Led electronic driver, surge protection upto 2 KV, operative on 140 volts to 270 volts AC supply complete prewired products must be made in India only connection and testing complete all as specified and directed. Note : (i) Contractor shall be provided 2 years written manufacture's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be prodce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's.

M&L Sub main wiring with PVC insulated cable copper conductor FRLS two single core 6 Sqmm drawn through PVC rigid non metallic conduit including earth continuity FRLS copper conductor 6 Sqmm PVC insulated with green insulation complete all as specified and directed. Note : PVC conduit shall be measured and paid separately.

M&L Sub main wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn through Existing or new PVC rigid non metallic conduit including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified and directed. Note : PVC conduit shall be measured and paid separately.

M&L PVC rigid non metallic conduit fire proof medium grade ISI mark 25mm dia surface or concealed including conduit accessories such as tee, elbow ,bend junction box complete all as specified and directed. Note : Cutting chases shall be measured and paid for separately.

M&L cutting chases for concealed conduit wiring and making good in cement mortar 1:3 , cutting of girth suitable to accomodate 25 mm bore wiring conduit pipe including finishing of disturbed surfaces as per existing adjoining specifications complete all as specified and directed.

M & L for DB's 4 way TPN double door with bus bar of 200 Amps rated per fitted with MCB,and MCBs SP 6-32 Amps 10KA (as per site requirement) in outgoing circuits complete pre fitted and prewired with PVC insulated FRLS copper conductor wire of suitable size, with neutral bar and earth bar complete all as specified and directed.

M & L for replacement TPN MCB, 415 Volts, 50 Hz, having rupturing capacity 10 KA, of rating 16 to 32 Amps complete all as specified and directed.

M & L for replacement TPN MCB, 415 Volts, 50 Hz, having rupturing capacity 10 KA, of rating 40 Amps complete all as specified and directed.

M&L for sheet metal DB for MCBs, SPN, 8 ways,single door,singal phase, IP-43 company painted with 200 Amps rated bus bar, neutral bar/ connectors, each bar/ connectors, prewired complete with suitable copper conductor wire, PVC insulated, FRLS type with suitable copper thimbles, lugs etc complete all as specified and directed.

All as per srl item No. 37 here-in-before but of size 4 ways complete all as specified and directed.

All as per srl item No. 37 here-in-before but of size 12 ways complete all as specified and directed. Note for srl item 39 and 41 :- MCB,s SPN & SP shall be measured and paid for separately.

M&L MCB SP 6 to 32 Amps, 10 KA, C-curve complete all as specified and directed.

M&L MCB SPN 32 Amps, 10 KA, C-curve complete all as specified and directed.

Supply & fixing LED post top lantern 20 W e-top with aluminium die cast housing cum heat sink with PMHA diffuser in IP 65 including taking down existing light fittings etc complete all as specified and directed.

S&F energy saving recess mounting deep drawn LED luminaire, 36 watt, 6000K suitable for false ceiing of size 60cm x 60cm, having power factor more than 0.90 IP-20 class-I protection with efficiency LED electronic driver BIS approved surge protection 2 KV (minimum), operative on 140 volts 270 volts AC supply, products must be made in India only, complete prewired, connecting and testing complete all as specified and directed.

M&L for energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 25/30 watt LED for bldg security lights with high efficiency electronic driver BIS approved, having IP-65 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply 140 volts to 270 volts pre-wired and product should be made in India only complete all as specified and directed. Note: (i) Contractor shall be provided 2 years written manufacturer's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 Report of NABL accredited Laboratory from manufacturer's.

Supply only insulation LT tape size normal width 20mm Length 25 Mtr Thickness 0.125mm complete all as specified and directed.

S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and directed.

S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Bell push switch one/two Modular type 5 Amps, SP, 240 volts complete all as specified and directed.

Supplying and fixing in repair 1100 volts grade heavy duty cable PVC insulated aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 6 sqmm suspension wire(stranded conductor),one twin core cable flat or circular complete all as specified and directed.

Supplying and fixing in reapir 1100 volts grade heavy duty cable PVC insulated aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 10sqmm suspension wire(stranded conductor),one twin core cable flat or circular complete all as specified and directed.

Taking down,refixing and hanging ceiling fan for repair/replacement of unserviceable items of any make/ model of sweep 1200/1400 mm by removing burnt / heated copper winding from stater and rewinding the stater coils with super enamelled copper wire of suitable size including providing insulation material, varnishing and provision of cotton tape, re-assembling and testing including replacement of spring washer and two core flexible wire of size 23/.0076 with copper conductor of suitable length( appx 1.50m length) from fan terminal to ceiling rose complete all as specified and directed.

M& L for earthing complete with & including galvanized MS earth plate of size 600 x 600 x 6 mm thick, buried vertically in ground to a depth not less than 2.25 metre below ground level, with lop edge of earth plate not less than 1.5 below ground level connected to galvanized earth wire soldered and riveted or connected to earth plate by means of nuts, bolts , check nuts & washers, of galvanized iron or steel all as Shown in electrical plate No. 3 of MES SSR Part- I (2009) and connected to panel board, all as specified and testing on completion including provn of earth wire 4 mm dia duly protected with and including 15 mm dia bore medium grade GI pipe upto 7.5 (maximum) meter from electrode to earth point including provn of the earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate and GI light grade watering pipe of 20mm dia bore with funnel with wire mesh including all necessary excavation & earth work in any type of soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC 1:3:6 type C-1 as in earth chamber, 50 mm thick RCC cover using cementconcrete 1:2:4 type B-0 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work and MS frame using MS angle of size 40mm x 40mm x 6mm complete all as specified & directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to the department.