Military Engineer Services Tender

Lumpsum price worked out by the contractor for Plumbing work as listed in Schedule 'A' Part-IV.

Lumpsum price worked out by the contractor for Site clerance work as listed in Schedule 'A' Part-V.

Lumpsum price worked out by the contractor for Protective work as listed in Schedule 'A' Part-VI.

Lumpsum price worked out by the contractor for Road and Path work as listed in Schedule 'A' Part-VII.

Lumpsum price worked out by the contractor for Sewage disposal work as listed in Schedule 'A' Part-VIII.

Lumpsum price worked out by the contractor for Area drainage Work as listed in Schedule 'A' Part-IX.

Lumpsum price worked out by the contractor for Compound wall/ fencing and Gate Work as listed in Schedule 'A' Part-X.

Lumpsum price worked out by the contractor for Lightening protection work as listed in Schedule 'A' Part-XI.

Lumpsum price worked out by the contractor for External Electrification work as listed in Schedule 'A' Part-XII.

Lumpsum price worked out by the contractor for External water supply and hot water supply as listed in Schedule 'A' Part-XIII.

Lumpsum price worked out by the contractor for Hardstanding works as listed in Schedule 'A' Part-XIV.

Point wiring with 1.5 sqmm copper conductor cables (multistranded),unsheathed FRLS PVC insulated , (using colour code as per IS), 1100 Volts grade in and including concealed PVC rigid conduit thickness not less then 1.8mm, heavy duty (ISI marked) of adequate size with sunk cast iron/pressed terminal box with 3mm thick laminated sheet for one light /fan/bell or buzzer/exhaust fan point controlled by one, one way switch including continuous 1.5 sqmm copper conductor (multistranded using colour code) FRLS, PVC insulated and unsheathed cable as earth wire and connected to earth dolly complete all as specified and conforming to IS-694 complete all as specified and directed.

All as per item No 15 here-in-before but for one 3 pin socket outlet 5 Amps on independent board.

All as per item No 15 here-in-before but for one 3 pin socket outlet 5 Amps on same board.

Point wiring with 2.5 sqmm copper conductor cables (multistranded),unsheathed FRLS PVC insulated , (using colour code as per IS), 1100 Volts grade in and including concealed PVC rigid conduit thickness not less then 1.8mm, heavy duty (ISI marked) of adequate size with sunk cast iron/pressed terminal box 3mm thick laminated sheet of suitable modules for one 3 pin socket outlet 15 amps on independent board including continuous 2.5 sqmm copper conductor (multistranded using colour code) FRLS,PVC insulated and unsheathed cable earth wire and connected to earth dolly complete all as specified and conforming to IS-694 complete all as specified and directed.

Sub main wiring with 2 run of single core, 4 sqmm FRLS PVC insulated and unsheathed, multi stranded copper conductor cable using, colour code, red for phase and black with and including 4 sqmm FRLS PVC insulated and unsheathed copper conductor multistranded cable in green colour earth wire connected to earth dolly drawn in and including concealed PVC rigid conduit of suitable size having thickness not less than 1.8mm, heavy grade (ISI marked) with and including all accessories, fixed to surface/recessed complete all as specified and directed.

All as per Srl Item No 19 here-in-above but submain wiring with 6 sqmm.

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED 1x15W lamp complete all as specified and directed.

MCB SPN 10 to 32 Amps, 240Volt, 50 Hz with 10 KA breaking capacity all as specified and directed.

MCB SPN 50 to 63 Amps, 240 Volt, 50 Hz with 10 KA breaking capacity all as specified and directed.

MCB SP 06 to 32 Amps, 240Volt, 50 Hz with 10 KA breaking capacity all as specified and directed.

Blanking plate for MCB DB's all as specified and directed.

Ceiling fan 1200mm sweep 5 star BEE rating, connecting up including making connection from ceiling rose to connector of fan with 1.00 sqmm of 3.00 core of copper flexible cable complete all as specified.

Exhaust fan 305mm sweep, single phase, 1400 RPM, heavy duty with louver shutter and connecting with electrical system, including provision of cable copper flexible, PVC three core 23/0.0076 from ceiling rose to fan and grouting of holding down bolts in and including PCC M-15(nominal mix) blocks complete all as specified. Makes:- Bajaj/Havells/Polycab

LED type tube light fitting including lamp, 1X18, Watt 230 volts wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories internally pre wired and including connecting up electrically with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Makes:- Cat part No LCTL-18-CDL of Crompton make or techno-commercially equivalent in Philps/Bajaj/Havells/Polycab.

Celene LED surface lighting round down lighter (Porch light) enrgery saving white powder coated CRCA housing and PS diffuser product code LD00112019, 18 Watt CCT 6500 K complete with all accessorie complete all as specified and directed. Makes:- Philps/Bajaj/Havells/Polycab.

LED light bulk head fitting 1x10 Watt including lamp surface mounted luminaries with ABS bodyand polycabonate diffuser CCT 6000K complete with all accesssories internely pre wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make : Cat part PCGLBHDLK10 of Polycab or techno-commercially equivalent in Philps/Bajaj/Havells/Polycab.

LED street light fitting complete, 1X25 Watt, 230 volt, energy saving and environmental friendly long life versatile pressure dicast aluminium IP- 66 road way luminary with high power LED as light source and electronic driver complete mounted on wall/pole with 40mm dia 1.2 mtr long medium grade GI Pipe bent to shape mounted on wall with the help of 02 Nos suitable size of FI holding clamp with nuts, bolts and washers and making electrical connection with three core twisted flexible copper conductor cable of 1.0 sqmm size, PVC insulated unsheathed from ceiling rose to light fittings, complete with all accessories internally pre wired complete all as specified and directed. :- Make:- Cat part No LSTS-25-CDL of Crompton make or techno-commercially equivalent in Philps/Bajaj/Havells/Polycab.

LED tube light fitting 1x14 Watt, 230 Volt, decorative wall mounting (Mirror light) linnet type two feet inlcuded complete accessries to give true reflection without shadow complete all as specified and directed. Make:- Cat part No LCL-14-CDL of Crompton make or techno-commercially equivalent in Philps/Bajaj/Havells/Polycab.

Supply, installation, testing and commissioning of solar water heating system with ETC Technology of capacity 100 LPD with electric backup as per recommendations of manufacturer suitable of single phase 220 Volt AC supply complete with ETC type collectors, hot water tank, tank stand etc. with the following specifications:- (a) Collector:- ETC type with vertical evacuated tubes, duly installed on angle iron farme, transmittance of cover glass tubes 85 %, reflectance of glass tubes more than 85%, absorbance of glass tube 92%, coating (Cu/AI/SS) and reflectance of coating as recommended by manufacturerer having wind resistance upto 100 Km per hour with freezing resistance upto minus 20 degree Celsius and heating up coefficient 240 degree Celsius having average thermal efficiency 58.76 % and maximum rise in temperature 53 degree Celsius (in 24 hours) without night losses fixed at angle of inclination from horizontal as directed. (b) Hot water tank:- Hot water tank of 100 litres capacity with suitable electric backup for sufficient heating for all different capacity made up of stainless steel sheet of not less than 0.5 mm thick duly insulated with puff insulated 50mm thick having density not less than 36 KG /M3 having thermal conductivity 0.29 W-m/K duly covered with PPGI cladding fixed with temperature gauge, inlet and outlet valve of suitable size duly installed on staging fabricated out of MS angle of appropriate size as recommended by manufacturer duly fixed properly and painted with two coats of anti coorosive paint over a coat of red oxide primer. Note:- Financial effect of any other item required for successful operation of system is deemed to be included in overall cost quoted by the contractor.

All as per Srl Item No 33 but solar water heater system 200 LPD capacity with hot water tank 200 ltr capacity duly insulated with PPGI cladding including electric backup as recommended of manufacturer.

Supply, installation, testing and commissioning of water heater storage type, electric, capacity 25 litres, BEE 5 Star rated including PVC connections (2 Nos) 450 mm long complete all as specified and directed. Makes:- Havells/Racold/Jaquar.

Supply and installation of refrigerator electric driven, single phase, 5 Star rating, capacity 200 litres complete all as specified and directed. Makes:- LG/Godrej/Samsung.

Supply and installation of refrigerator electric driven, single phase, 5 Star rating, capacity 165 litres complete all as specified and directed. Makes:- LG/Godrej/Samsung.

Supply, installation, testing and commissioning of water cooler partially stainless steel electric driven (single phase), having storage capacity of 40 litre and nominal cooling capacity of 40 litre per hour complete all as specified and directed.

Supply, installation, testing and commissioning of water cooler partially stainless steel electric driven (single phase), having storage capacity of 80 litre and nominal cooling capacity of 40 litre per hour complete all as specified and directed.

Supply, installation, testing and commissioning of desert cooler electric driven (single phase) having nominal air flow capacity of 4000 CuM per hour (or nearest size) steel body complete all as specified and directed.

Supply, installation, testing and commissioning of voltage stablizer for automatic operation, single phase, naturally air cooled, indoor wall mounted type and designed for input variation between 170 Volt to 250 Volt with output voltage stablized to 230 Volt with accuracy of + 2.5 % high/low voltage protection with time delay device and of capacity 0.5 KVA complete all as specified and directed. Makes:- Volin/V-Guard.

Supply, installation, testing and commissioning of voltage stablizer for automatic operation, single phase, naturally air cooled, indoor wall mounted type and designed for input variation between 170 Volt to 250 Volt with output voltage stablized to 230 Volt with accuracy of + 2.5 % high/low voltage protection with time delay device and of capacity 1.0 KVA complete all as specified and directed. Makes:- Volin/V-Guard.

Supply, installation, testing and commissioning of room window type air conditioner electric driven (single phase), cooling capacity 4500 K Cal per hour (1.5 Ton) BEE 5 Star rated complete all as specified and directed. Makes:- Hiachi/Voltas/ Whirpool

Supply, installation, testing and commissioning of voltage stablizer for automatic operation, single phase, naturally air cooled, indoor wall mounted type and designed for input variation between 170 Volt to 250 Volt with output voltage stablized to 230 Volt with accuracy of + 2.5 % high/low voltage protection with time delay device and of capacity 3.0 KVA complete all as specified and directed. Makes:- Volin/V-Guard.

Supply, installation, testing and commissioning of top deep freezer 200 litre capacity having single door complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm and 6 mm thick buried directly in ground (earth pit not lesss than 2.25m deep below normal ground level with top edge of plate not less than 1.5m below normal ground level, connecting to the GI earth wire of size 4mm size by means of bolts nuts, check nuts and protected by provision of GI medium grade pipe of 15 mm bore including provision of 40mm thick cover of RCC (1:2:4) reinforced with XPM (wt no lesss than 4kg/sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handel made to shape, GI light grade 20mm Dia pipe for watering of suitable lenght placed on top edge of earth plate, commom salt and charcol filling, with fixing arrangement, funnel, wire mesh and excavation and earthwork in any type of soil, returning filling in and removal of surlupus soil to distance not exceeding 50m complete all as per plate no 3 of SSR 2009 part-I and connecting to earth test point all as spd and directed by engineer incharge and including testing on completion NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item .(ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe up to 7.50 m and the rate includes in the unit rate of item .(iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item. (iv) The earth chamber shall be constructed 5 m away from the edge of the bldg pit and the cost of the same is deemed to be included in the rate quoted for this item.

Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm and 6 mm thick buried directly in ground (earth pit not lesss than 2.25m deep below normal ground level with top edge of plate not less than 1.5m below normal ground level, connecting to the GI earth Strip 32mm X 6mm mm size by means of bolts nuts, check nuts and protected by provisin of GI medium grade pipe of 40 mm bore including provision of 40mm thick cover of RCC (1:2:4) reinforced with XPM (wt no lesss than 4kg/sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handel made to shape, GI light grade 20mm Dia pipe for watering of suitable lenght placed on top edge of earth plate, commom salt and charcol filling, with fixing arrangement, funnel, wire mesh and excavation and earth work in any type of soil, returning filling in and removal of surlupus soil to distance not exceeding 50m complete all as per plate no 3 of SSR 2009 part-I and connecting to earth test point all as spd and directed by engineer incharge and including testing on completion.NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item .(ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe and the rate includes in the unit rate of item (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item .

Construction of brick masonary valve pit of size 90cm x 90cm x 90 cm (internal dimensions) built in cement mortar 1:6,Plain cement concrete,M-10 (nominal Mix) type C-2(using 40mm graded crushed stone aggregate) as in foundation filling and including 15mm thick plastering internally with cement mortar 1:5 and flush pointing externally as the work proceeds in same mortar and plain cement concrete,M-15(nominal mix),type B-1,(using 20 mm graded crushed stone aggregates) as in coping 50mm complete including 3.15 mm thick MS sheet cover, handle, locking arrangement including provision of angle iron frame 40mmx40mmx6 mm with 15 cm same angle four sides for grouting in PCC for cover and earth work in any type of soil including removal to a distance not exceeding 50 mtr and painting steel surface with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

All as per Srl Item No 48 here-in-before but of size 60cmx60cmx90cm.

Angle cock chromium plated suitable for 15mm dia bore complete all as specified and directed.