Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 90,053Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_665585_1Bid Award Id
ViewTender No
GE/BHI/T-58/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
S&F in repairs 15 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 142 gms) complete all as specified and as directed by Engr-in-Charge.
25
-
-
S&F in repairs rotational moulded polyethylene Water Storage Tanks of capacity 500 Ltrs 3 layers white colour (cylinderical vertical with closed top) hoisted and fixed in position including all accessories all as specified and directed by Engr-in-Charge.
1
-
-
S&F in repairs CI body Sluice Valve PN 1.6 conforming to IS of size 100 dia complete with nuts, bolts, rubber gaskets etc including, ISI marked, including jointing material such as rubber gasket, bolts, nuts, etc suitable for size 100 mm all as specified and as directed by Engr-in-Charge.
5
-
-
S&F in repairs CI body Sluice valve PN 1.6 conforming to IS of size 150 dia complete with nuts, bolts, rubber gaskets etc including, ISI marked, including jointing material such as rubber gasket, bolts, nuts, etc suitable for size 150 mm all as specified and as directed by Engr-in-Charge.
5
-
-
S&F in repairs CI body Sluice valve PN 1.6 conforming to IS of size 200 dia complete with nuts, bolts, rubber gaskets etc including, ISI marked, including jointing material such as rubber gasket, bolts, nuts, etc suitable for size 200 mm all as specified and as directed by Engr-in-Charge.
4
-
-
Supply and laying 100 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in trenches all as specified and as directed by Engr-in-Charge.
458
-
-
Supply and laying 80 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in trenches all as specified and as directed by Engr-in-Charge.
200
-
-
Supply and laying 50 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in trenches.
400
-
-
Supply and laying 40 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in trenches.
150
-
-
Supply and laying 25 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in trenches/wall and ceiling or laid in floors.
300
-
-
Supply and laying 20 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in wall and ceiling or laid in floors.
350
-
-
Supply and laying 15 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in trenches/wall and ceiling or laid in floors.
200
-
-
Taking out Unserviceable and M&L for run lead joints for 300mm dia spigot and socketed CI pipe fittings including spun yarn etc.
8
-
-
Taking out Unserviceable and M&L for run lead joints for 250mm dia spigot and socketed CI pipe fittings including spun yarn etc.
8
-
-
Taking out Unserviceable and M&L for run lead joints for 200mm dia spigot and socketed CI pipe fittings including spun yarn etc.
8
-
-
Taking out Unserviceable and M&L for run lead joints for 150mm dia spigot and socketed CI pipe fittings including spun yarn etc.
25
-
-
Taking out Unserviceable and M&L for run lead joints for 100mm dia spigot and socketed CI pipe fittings including spun yarn etc.
30
-
-
Taking out Unserviceable and M&L for run lead joints for 80mm dia spigot and socketed CI pipe fittings including spun yarn etc.
25
-
-
Taking up or down Unserviceable GI tubing/pvc and connection 40/50 mm size complete all as directed byEngineer in Charge.
550
-
-
Taking up or down Unserviceable GI tubing/pvc and connection 25 mm size complete all as directed byEngineer in Charge.
300
-
-
Taking up or down Unserviceable GI tubing/pvc and connection 20 mm size complete all as directed byEngineer in Charge.
350
-
-
Taking up or down Unserviceable GI tubing/pvc and connection 15 mm size complete all as directed byEngineer in Charge.
200
-
-
Excavation in trenches, not exc 1.5 mtr wide and not exc. 1.5 mtr in depth and getting out hard/dense soil all as specified and as directed.
323.68
-
-
M&L for returning filling in including spreading, levelling, watering and ramming in layers not exceeding 25 cm thick with earth obtained from excavation all as specified and as directed.
258.94
-
-
M&L for removal of surplus soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and as directed.
64.74
-
-
Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
1
-
-
S&F in replacement of Water pressure gauge tamper proof and water proof having capacity of 0 to 104 kgf/cm2. Note : The quoted rate shall be included making hole in existing GI/DI/MS Pipe and new 15 mm GI/CI pipe 0.4 mtr for fixing of pressure gauge making thread in pipe all as directed.
5
-
-
Taking Out Unserviceable and S&F cast iron fittings like bends, tee, tail pieces collars etc, spigot socketed and flanged ends type etc c conforming IS upto 150 mm bore pipes all as specified and as directed.
Note : Lead joints Earth works will be measured and paid separately.
250
-
-
Taking Out Unserviceable and S&F cast iron fittings like bends, tee, tail pieces collars etc, spigot socketed and flanged ends type etc conforming IS 200 to 300 mm bore pipes all as specified and as directed.
Note : Lead joints Earth works will be measured and paid separately.
120
-
-
Supply only spun yarn good quality for tighing of union socket etc for water supply pipe all as directed.
3
-
-
Supply and laying cast iron pipes 200 mm dia with spigot and socket ends centrifugally cast, class 'B' in any length laid in trenches all as specified and as directed.
12
-
-
Supply and laying cast iron pipes 150 mm dia with spigot and socket ends centrifugally cast, class 'B' in any length laid in trenches all as specified and as directed.
18
-
-
Supply and laying cast iron pipes 250 mm dia with spigot and socket ends centrifugally cast, class 'B' in any length laid in trenches all as specified and as directed.
12
-
-
Taking down Unserviceable CI Pipe of 200 mm dia including all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead all as specified and as directed.
12
-
-
Taking down Unserviceable CI Pipe of 150 mm dia including all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead all as specified and as directed.
18
-
-
Taking down Unserviceable CI pipe of 250 mm dia including all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead all as specified and as directed.
12
-
-
Labour for finding the fault in existing line & Disconnecting & again reconecting of existing 150mm dia DI/CI pipe, fixing with new pipes of various material and sizes of pipe given in schedule, Complete all as specified and as directed by Engineer in Charge. Note: The rate shall be included for excavation/ removal/refilling up to 03 mtr Length x 01 mtr width x 02 mtr depth Pipe line for finding the leakage in underground pipe line at various location in AF Stn at Bhisiana.
5
-
-
Labour for finding the fault in existing line & Disconnecting & again reconecting of existing 100/80 mm dia DI/CI pipe, fixing with new pipes of various material and sizes of pipe given in schedule, Complete all as specified and as directed by Engineer in Charge. Note: The rate shall be included for excavation/ removal/refilling up to 03 mtr Length x 01 mtr width x 02 mtr depth Pipe line for finding the leakage in underground pipe line at various location in AF Stn at Bhisiana.
5
-
-
Labour for finding the fault in existing line & Disconnecting & again reconecting of existing 50/40 mm dia DI/CI pipe, fixing with new pipes of various material and sizes of pipe given in schedule, Complete all as specified and as directed by Engineer in Charge. Note: The rate shall be included for excavation/ removal/refilling up to 03 mtr Length x 01 mtr width x 02 mtr depth Pipe line for finding the leakage in underground pipe line at various location in AF Stn at Bhisiana.
15
-
-
Labour for finding the fault in existing line & Disconnecting & again reconecting of existing 25/20 mm dia DI/CI pipe, fixing with new pipes of various material and sizes of pipe given in schedule, Complete all as specified and as directed by Engineer in Charge. Note: The rate shall be included for excavation/ removal/refilling up to 03 mtr Length x 01 mtr width x 02 mtr depth Pipe line for finding the leakage in underground pipe line at various location in AF Stn at Bhisiana.
20
-
-
Taking out Unserviceable and S&F CI body NRV of size 150 dia complete with nuts, bolts, rubber gaskets etc including jointing materials such as rubber, gasket, bolts, nuts etc suitable for size complete all as specified and directed by Engineer in Charge.
4
-
-
Taking out Unserviceable and S&F CI body NRV of size 200 dia complete with nuts, bolts, rubber gaskets etc including jointing materials such as rubber, gasket, bolts, nuts etc suitable for size complete all as specified and directed by Engineer in Charge.
3
-
-
Taking out unserviceable and S&F new Gun Metal globe or gate valve (ISI marked), with Iron wheel head, screwed both ends, suitable for 20 mm bore iron pipe and fixed including testing complete all as specified and directed by Engr-in-Charge.
4
-
-
S&F ductile Iron Pipe , S/S including all fittings and accessories epoxy coated (heavy duty) specials, Class “K-7” 150 mm (4”) dia Complete all as specified and directed by Engineer in Charge.
150
-
-
Taking out old Unserviceable and S&F CI body Sluice Valve PN 1.6 conforming to IS of size 80mm dia complete with nuts, bolts, rubber gaskets etc including, ISI marked, including jointing material such as rubber gasket, bolts, nuts, etc suitable for size 80 mm all as specified and as directed by Engr-in-Charge.
2
-
-
Taking out unserviceable and S&F new Gun Metal globe or gate valve (ISI marked), with Iron wheel head, screwed both ends, suitable for 50 mm bore iron pipe and fixed including testing complete all as specified and directed by Engr-in-Charge.
6
-
-
Taking out unserviceable and S&F new Gun Metal globe or gate valve (ISI marked), with Iron wheel head, screwed both ends, suitable for 40 mm bore iron pipe and fixed including testing complete all as specified and directed by Engr-in-Charge.
4
-
-
Taking out unserviceable and S&F new Gun Metal globe or gate valve (ISI marked), with Iron wheel head, screwed both ends, suitable for 25 mm bore iron pipe and fixed including testing complete all as specified and directed by Engr-in-Charge.
2
-
-
M&L for brick masonary valve pit (type B) of size 1.2 x1.2 x 1.2 M (internal of chamber) depth of chember to be reckoned from the top of PCC in foundation to top the MS cover as 1.5 mtr and including MS sheet cover fabricated from 3 mm thick MS sheet and frame of angle iron 40 mm x 40 mm 6 mm with fixing arrangement, hinges and locking arrangement and painting two coat of synethetic enamel paint over a coat of red oxide primer on MS cover and frame, inlcuding necessary excavation and earth work in any type of soil, returning, filling in approved soil disposal of surplus soil to a distance not exc.50 mtr, 150 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, brick work in cement motor (1:6) 15 mm thick plastering in cement mortoar (1:4) (both internally and externally) 100 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in flooring complete all as specified and directed by Engineer in Charge.
2
-
-
Earthing complete with GI earth plates electrode 600x600x6mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level surrounded with adequate quantity of charcoal dust mixed with salts to a packet thickness of 15 cm all around the plate, using GI earth strip 25x4mm connected to earth plate by means of nut, bolts and washers as directed GI pipe light grade 50mm bore on water pipe from earth chamber to copper edge of earth plate, CI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in pit chamber and RCC pitcover 50mm thick pre-cost RCC 1:2:4 type B-1 dully rainforced with MS bars 6mm dia @150 c/c both ways with 10mm dia MS bar in lifting handle excavation earth work including laying of GI pipe in walls etc all as directed in electrical plate No 3 of SSR Part-I including dismantling complete all as specified and directed by Engineer in Charge.
6
-
-
Taking down Unserviceable and Supply and fix GI Nipples ISI marked of following sizes all as specified and as directed:-
-
-
-
(a) 15 x 50 mm
100
-
-
(b) 15 x 100 mm
100
-
-
(c) 15 x 150 mm
100
-
-
(d) 20 x 50 mm
80
-
-
(e) 20 x 75 mm
80
-
-
(f) 20 x 100 mm
80
-
-
(g) 25 x 50 mm
80
-
-
(h) 25 x 75 mm
75
-
-
(j) 25 x 150 mm
50
-
-
Supply and fix in repair of Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed size of 15 mm bore complete all as specified and directed by Engr-in-Charge.
20
-
-
S&F in repairs rotational moulded polyethylene Water Storage Tanks of capacity 1000 Ltrs 3 layers white colour (cylinderical vertical with closed top) hoisted and fixed in position including all accessories all as specified and directed by Engr-in-Charge.
1
-
-
Taking down Unserviceable and S&F GI unions ISI marked of following sizes all as specified and as directed.
-
-
-
(a) 15 mm
100
-
-
(b) 20 mm
100
-
-
(c) 25 mm
100
-
-
(d) 40 mm
25
-
-
(e) 50 mm
25
-
-
(f) 80 mm
5
-
-
(g) 100 mm
6
-
-
Taking down Unserviceable and S&F GI elbow ISI marked of following sizes all as specified and as directed:-
-
-
-
(a) 15 mm
40
-
-
(b) 20 mm
40
-
-
(c) 25 mm
25
-
-
Taking down Unserviceable and S&F Reducer sockets ISI marked of following sizes all as specified and as directed:-
-
-
-
25 mm x 20 mm
80
-
-
25 mm x 15 mm
80
-
-
40 mm x 20 mm
15
-
-
50 mm x 25 mm
20
-
-
50 mm x 20 mm
20
-
-
Taking down Unserviceable and S&F GI TEE ISI marked of following sizes all as specified and as directed:-
-
-
-
15 mm x 15 mm x 15 mm
50
-
-
20 mm x 20 mm x 20 mm
40
-
-
25 mm x 25 mm x 25 mm
50
-
-
50 mm x 50 mm x 25 mm
26
-
-
40 mm x 40 mm x 25 mm
30
-
-
Taking down Unserviceable and S&F GI Bends ISI marked of following sizes including taking out the old one all as specified and as directed:-
-
-
-
15 mm
65
-
-
20 mm
25
-
-
25 mm
20
-
-
40 mm
8
-
-
50 mm
5
-
-
80 mm
3
-
-
Taking down Unserviceable and S&F GI Plug ISI marked of following sizes including taking out the old one all as specified and as directed:-
-
-
-
15 mm
40
-
-
20 mm
40
-
-
25 mm
25
-
-
50 mm
6
-
-
80 mm
5
-
-
100 mm
5
-
-
Taking down Unserviceable and S&F Sockets ISI marked of following sizes all as specified and as directed:-
-
-
-
15 mm
100
-
-
20 mm
100
-
-
25 mm
80
-
-
32 mm
25
-
-
40 mm
15
-
-
50 mm
15
-
-
Taking down Unserviceable and S&F MS nuts bolts of required size in various water supply installations & valves
85
-
-
Taking out unserviceable and S&F new Gun Metal globe or gate valve (ISI marked), with Iron wheel head, screwed both ends, suitable for 15 mm bore iron pipe and fixed including testing complete all as specified and directed by Engr-in-Charge.
5
-
-
Supply & Pouring Non ferric alum AL2 (SO4)3 density 2.672g/cm3 appearance white Crystals clear type (transparent) superior grade all as specified and as directed. Note : The sample availabel at the AGE E/M office.
3300
-
-
Supply and Make liquid form and pore in chlorination plant in the Pump House i.e. Main Pump House, Mini Pump House, Silver Jublee, Aahuja Pump House, Timing 0400 to 0600 and 1500 hrs to 1700 Hrs on daily . The of Calcium based Granular Chlorination Chemical (60-70%) Chlorine Granuals in fine form of good quality Size 2-4 Mesh Appearance : White Granuals Effective Chlorine : 60-70% (Make : ALTOCH GP/ADITYA BIRLA, Aquafit Pirichlor by Shree Royal Seema), Purichlor all as directed in fine form of good quality. Note : The rate shall be included for labour and material for making liquid form and poring to dosing plant till completion of contract on daily.
1090
-
-
S&F Mechanical joint suitable for 200 mm bore CI pipe, including cutting pipe excavation and earth work etc, nuts, bolts and washers all as directed by Engr-in-Charge.
2
-
-
S&F Mechanical joint suitable for 150 mm bore CI pipe, including cutting pipe excavation and earth work etc, nuts, bolts and washers all as directed by Engr-in-Charge.
5
-
-
S&F Mechanical joint suitable for 100 mm bore CI pipe, including cutting pipe excavation earth work etc, nuts, bolts and washers all as directed by Engr-in-Charge.
5
-
-
S&F Mechanical joint suitable for 80 mm bore CI pipe, inlcuding cutting pipe excavation and earth work etc, nuts, bolts and washers all as directed by Engr-in-Charge.
5
-
-
Supply and replace Jip leather 150 mm suitable for CI foot ball including nut boltd washer.
Note : Rate included for removing and refixing football in to the pipe in sump.
50
-
-
Supply and replace Jip leather 100 mm suitable for CI foot ball including nut boltd washer.
Note : Rate included for removing and refixing football in to the pipe in sump.
5
-
-
Supply and replace Jip leather 80 mm suitable for CI foot ball including nut boltd washer.
Note : Rate included for removing and refixing football in to the pipe in sump.
5
-
-
Supply and replace gasket for 150 mm dia pipe suitable for CI foot ball/Sluice valve including nut bolt washer.
Note: Rate included for removing and refixing football in to the pipe in sump.
5
-
-
Supply and replace gasket for 100/80 mm dia pipe suitable for CI foot ball/Sluice valve including nut boltd washer
Note : Rate included for removing and refixing football in to the pipe in sump.
5
-
-
S&F MS Clamp 100/80 mm dia pipe 08 inch long with rubber suitable size nut, bolts, washer including taking down old unserviceable clamp all as specified and as directed.
4
-
-
S&F MS clamp 50/40 mm dia pipe 06 inch long with rubber suitable size and nut, bolts, washer including taking down old unserviceable clamp all as specified and as directed.
4
-
-
Taking down Unserviceable and Supply and fix tank connection 15 mm complete all as directed by Engineer in Charge.
5
-
-
Taking down Unserviceable and Supply and fix tank connection 20 mm.
6
-
-
Taking down Unserviceable and Supply and fix tank connection 25 mm.
10
-
-
Taking down Unserviceable and Supply and fix rubber sheet size 3 mm.
60
-
-
M&L for PCC 1:3:6 with 20 mm graded aggregate for making foundation /support of pipe line/ making approach path for placing of rotational moulded polyethylene water storage tanks of capacity 500 Ltrs complete all as specified and as directed by Engr-in-Charge.
1
-
-
Supply and fill resin and hardner. : Make M Seal.
5
-
-
M&L for Attending Complaint of water supply regarding water leakage, finding out of damaged pipe , chocking of pipe , low pressure, finding out leakage in 300/250/200/150/80/40/25/15 of GI/DI/CI pipe lines or any other issue resulting in no water supply at user end complete all as specified and directed by Engineer in Charge. Note:- Material/pipe/fittings found defective will be paid separately under respective schedule
1050
-
-
Dismantling of 150/200mm dia DI Pipe from any location and make again connection as per direction of Engineer in Charge.
Note:
(a) The Quoted cost shall deem to be included all fittings like socket, bend, elbow etc and laying of pipe underground as per existing.
(b) The Earth Work shall be measured and paid seperately under appropriate Items.
1
-
-
S&F ductile Iron Pipe , S/S including all fittings and accessories epoxy coated (heavy duty) specials, Class “K-7” 200 mm (8”) dia Complete all as specified and directed by Engineer in Charge.
12
-
-
S&F Wall supported steel ladder 25 feet long made of MS Heavy Grade pipe of 50mm dia pipe with arrangement of 500 mm hand rails dia 43mm stainless steel non slip steps provided with electrical earthing connection and anchoring fixture of make Tata/Jindal with FRP coated 3mm thick in level UG Sump to avoid rusting from chemical action.
Note:The quoted rate shall include all welding work and Cement concrete required for fixing of ladder.
2
-
-
S&F in repairs of LED Garden light fittings with LED of 9-10 watt upto 550mm height in stainless steel housing with clear acrylic cover in top section with IP 65 Protection and 120 degree view angle,100 lumen/watt,luman maintenance70% at 50,000hrs,colour temperature of 5000-6500K, colour rendering and LM80 test compliance.The driver must be integral APFC and constant current type having THD15% and power factor0.95 with short circuit protection,open protection,reverse polarity protection,high voltage protection complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed by Engineer in Charge.
9
-
-
S&F Mechanical joint suitable for 50/40 mm bore CI pipe, inlcuding cutting pipe excavation and earth work etc, nuts, bolts and washers all as directed by Engr-in-Charge.
20
-
-
M&L for Cement Concrete of type 1:2:4 (40mm graded crushed aggregate) thickness of cement concrete is not less than 100mm thickness for making floors for new pump house/ telenkheri. The rate shall include for finishing the cement concrete surface even and smooth including dismantling of existing concrete, complete all as specified and directed by Engineer in Charge.
50
-
-
Supply and fix CI fittings flanged end up to 150 mm dia bore such as Bends (any type radious and angle ) tapers any type , (straight, bends increasing, decreasing or double socket etc) Tee places single branch , 'Y' junction , double branch , cross (all sockets or socket and spigot ) collars caps and plugs, mechancal joints suitable for 150 /80/100 mm pipe.
Note The cost shall be included for nut bolt any size and length rquire to fix , joint of MS pipe and joint , elbow , Tee, , Bend , Flanged ro existing pipe suction and delivery.
200
-
-
Supply and fix in replacement of construction of valve pit chambers of size 1.5m X 1.50mX 1mtr (internal dimensions) as under provided with 10 cm thick PCC 1:4:8 type D2 as in foundation over 15 cm thick hard core, 23 cm thick brick walls built in cement mortar 1:4, 15 mm thick internal plaster including top of floor, externally upto 150 mm below GL in CM 1:3 finish even and smooth without using extra cement, 4 mm thick MS sheet cover with 40 x 40 x 6 mm MS angle frame fixed in PCC 1:2:4 type B1 coping with 25 x 6 mm flat iron hold fasts, hinges, handles, locking arrangements and applying 2 coats of synthetic enamel paint over acoat of red oxide primer to all steel surfaces and 3 coats of white wash to internal surfaces of chamber including excavation and earth work in any type of soil and removing of surplus soil to a distance not exceeding 50 m complete all as specified and directed.
3
-
-
Taking down electric motor 40 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed.
4
-
-
Replacement of ball bearing of above motor bearing No -NBC 6309 with providing of high grade grease
4
-
-
Taking down electric motor 25 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing both side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed.
2
-
-
Replacement of U/S ball / roller bearing of above motor bearing No -NBC 6307 with providing of high grade grease complete al as specified and directed by Engineer in Charge.
4
-
-
Taking down electric motor 10 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed.
2
-
-
Replacement of U/S ball / roller bearing of above motor bearing of existing make with providing of high grade grease
4
-
-
Taking down electric motor 7.5 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed.
3
-
-
Replacement of U/S ball / roller bearing of above motor bearing of existing make with providing of high grade grease
3
-
-
Taking down electric motor 05 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed.
4
-
-
Taking down electric motor 01 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed.
2
-
-
Replacement of U/S ball / roller bearing of Item No 102 & 103 motor bearing of existing make with providing of high grade grease
2
-
-
M&L for opening pump from Sewage under ground sump 09 mtr depth or any pump house using lifting crane or suitable equipment to lift the pump from09 mtr depth or pump house set split case centrifugal type coupled to electric motor of capacity 40 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works all as specified.
4
-
-
Supply only spare parts for pump set for fixing against item No 105 as follows:-
-
-
-
a) Supply only key for main shaft/impeller
4
-
-
b) Supply only check nut for pump set shaft
4
-
-
c) Supply only stuffing box bush
4
-
-
d) Supply only motor pump coupling complete with nut, bolts etc
4
-
-
e) Supply only water seal
4
-
-
f)Supply only stuffing box packing
2
-
-
g) Supply only rubber tyre coupling complete make Fenner/Unique/Unimac NO TC-16/TC-14
4
-
-
h) Supply only pump set bearing housing .
2
-
-
j) Supply only pump Shaft
2
-
-
k) Supply ball/roller bearing complete
2
-
-
l) Supply only Air relase valve
2
-
-
m) Supply only Impeller Note: All the items/parts mentioned against 106.01 to 106.12 here-in-before shall be suitable/compatible for the type and make of pumping set as mentioned against item No above. Cost of fixing of items is deemed to be included in the unit rate of item above
2
-
-
M&L for opening pump set split case centrifugal type coupled to electric motor of capacity 25 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works all as specified.
2
-
-
Supply only spare parts for 25 HP pump set for replacing vide item No. as follows:-
-
-
-
a) Supply only pump shaft sleeve made out of gun metal
4
-
-
b) Supply only key for main shaft
2
-
-
c) Supply only check nut
2
-
-
d) Rubber coupling as per sample suitable for 20 HP Centrifugal pump complete all as specified and directed by Engr-in-Charge Make : MRF or equivalent
Note: All the items/parts mentioned against 108.01 to 108.04 shall be suitable/compatible for the type and make of pumping set as mentioned against item No. 108.
2
-
-
M&L for opening pump set split case centrifugal type coupled to electric motor of capacity 10 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works all as specified.
3
-
-
Supply only spare parts for 10 HP pump set for replacing vide item No. above as follows:-
-
-
-
a) Supply only pump shaft sleeve made out of gun metal
3
-
-
b) Supply only key for main shaft
3
-
-
c) Supply only check nut
3
-
-
d) Supply only water seal
5
-
-
e) Supply only pump Shaft
1
-
-
f) Supply ball/roller bearing complete
6
-
-
g) Supply only rubber tyre coupling complete make Fenner/Unique/Unimac Note: All the items/parts mentioned against 110.01 to 110.07 shall be suitable/compatible for the type and make of pumping set as mentioned against item No. 109 above
2
-
-
M&L for opening pump set split case centrifugal type coupled to electric motor of capacity 7.5 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works all as specified.
2
-
-
Supply only spare parts for 7.5 pump set for replacing vide item above as follows:-
-
-
-
a) Supply only pump shaft sleeve made out of gun metal
2
-
-
b) Supply only key for main shaft
2
-
-
c) Supply only check nut
2
-
-
d) Supply only water seal
2
-
-
e) Supply only pump Shaft
1
-
-
f) Supply ball/roller bearing complete
4
-
-
M&L for opening pump set split case monoblock /Submersible pump type coupled to electric motor of capacity 5 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works all as specified.
2
-
-
Supply only spare parts for 05 pump set for replacing vide item above as follows:-
-
-
-
a) Supply only pump shaft sleeve made out of gun metal
2
-
-
b) Supply only key for main shaft
2
-
-
c) Supply only check nut
2
-
-
d) Supply only water seal
2
-
-
e) Supply only pump Shaft
2
-
-
f) Supply ball/roller bearing complete
4
-
-
Dismantling Submersible pump set 10 HP 3 phase 415 V from borewll along witth colum pipe using lifting crane or suitbale equipmment to lift out submersible pump from borewell and after isolating the electric and earth lead connections, suction and delivery pipes etc opening the pump set, motor rotor and stator etc for repair/overhauling including replacing the unserviceable parts and jointing of new submersible canle given in schdeule with new items given vide item No given below and reassemblying the pumpset and reinstalling on foundation frame connecting, testing and commissioning complete all as specified.
2
-
-
Supply only spare parts for pump set of capacity 10 HPvide item above as follows:-
-
-
-
a) Supply only key for main shaft
2
-
-
b) Supply only check nut
2
-
-
c) Supply only impeller any matrial
2
-
-
d) Supply only water seal
2
-
-
e) Supply only submersible bearing complete
2
-
-
M & L for Rewinding of pump motor 415 Volt 3 phase after disconnecting electric cable and eath lead, suction and delivery pipes, from 09 mtre depth of sewage well or pump house or any location directed by JE E/M shifting to work shop, dismantling the motor assembly and removing the burnt out copper winding of stator and Rotar cleaning the stator slots and core assembly, rewinding to stator and rotar with suitable gauge super enamelled copper wire with insulating papers and insulation cloths, varnishing the winding and baking heating for achieving the required insulation resistance, re-assembling the motor and testing complete, incl transporting back to site and fixing motor to its original place, reconnecting electric cable and earth leads etc testing and commissioning complete in all respect all as specified and as directed by Engr-in-charge for the following capacity: -
-
-
-
(a) up to 5 hp
3
-
-
(b) 7.5 HP
2
-
-
(c) 10 HP
2
-
-
(d) 20 HP
1
-
-
(e) 40 HP
3
-
-
Dismantling booster pump 0.5 to 1 hp 3/1 phase 415/250 V from foundation base plate after isolating the electric and earth lead connections, suction and delivery pipes etc opening the pump set, motor rotor and stator etc for repair/overhauling and warnishing and baking the stator winding to enhance the insulation level including replacing the unserviceable parts with new items given vide item No given below and reassemblying the pumpset and reinstalling on foundation frame connecting, testing and commissioning complete all as specified.
2
-
-
Supply only spare parts for pump set of capacity 0.5 to 1 HPvide item No. 118 as follows:-
-
-
-
(a)Pressure switch suitable for 1 hp
2
-
-
(B) SS flexible pipe
2
-
-
(C) NRV 25 mm
Note:All the items/parts mentioned against 119.01 to 119.02 to here-in-before shall be suitable/compatible for the type and make of pumping set as mentioned against item Cost of fixing of items is deemed to bne included in the unit rate of item
2
-
-
Taking out Unserviceable and S&F CI body NRV of size 100 dia complete with nuts, bolts, rubber gaskets etc including jointing materials such as rubber, gasket, bolts, nuts etc suitable for size complete all as specified and directed by Engineer in Charge.
2
-
-
S&F in repair of High density polyethylene (LDPE) pipes 150 mm bore of pressure rating PN 10 all as specified and as diorected by Eng In-charge.
40
-
-
S&Fin repair of High density polyethylene (LDPE) pipes 75 mm bore of pressure rating PN 10 all as specified and as diorected by Eng In-charge.
40
-
-
Taking out Unserviceable and S&F CI body NRV of size 80 dia complete with nuts, bolts, rubber gaskets etc including jointing materials such as rubber, gasket, bolts, nuts etc suitable for size complete all as specified and directed by Engineer in Charge.
2
-
-
Taking out U/S & S&F DOL stater suitable for 5HP to7.5HP electric motors including necessary electric connections complete all as directed Make C&S Model No BE!SPSSDX204321-B /L&T
1
-
-
Taking out U/S & S&F Star-Delta stater suitable for 10HP electric motors including necessary electric connections complete all as directed Make :C&S Model No BE3SPSSDX404355A-4 L&T/Havells or equivalent
1
-
-
Taking out U/S & S&F Star-Delta stater suitable for relay range 38-50 electric motors including necessary electric connections complete all as directed Make :Incorporating Heavy duty 4 pole contactor Type YC1 -DX overload relay Typoe LR3D/LR1D , Auto start switch, 3 position selector switch for SPP , auto SPP Manual /Manual voltmeter with selector switch , supprssed scale ammeter , RYB LED Indiactor Motor ON 7 Trip Indicator TP C curve MCB for short circuit.
1
-
-
Taking out U/S & M&L for gland flange suitable for 5 to 40HP monoblock pump set incl replacement of gland packing all as directed
20
-
-
Taking out U/S & M&L for JEN/ rubber insertion packing suitable for Pump 40 HP TOP /200mm CI foot valve / suction pipe flanged incl replacement of U/S nut and bolts
15
-
-
M&L for painting of suction and delivery pipe not more than 5 mtrs and motor pump set of capacity up to 40 HP after removing all dust, dirt etc and clean the surface thoroughly with two coats of synthetic enamel paint including writing the complete all as specified and directed.
8
-
-
M&L for painting of suction and delivery pipenot more than 5 mtrs and motor pump set of capacity upto 10-20 HP after removing all dust, dirt etc and clean the surface thoroughly with two coats of synthetic enamel paint including writing the complete all as specified and directed.
2
-
-
M&L for painting of suction and delivery pipenot more than 5 mtrs and motor pump set of capacity upto up to 05 HP after removing all dust, dirt etc and clean the surface thoroughly with two coats of synthetic enamel paint including writing the complete all as specified and directed.
2
-
-
Taking out U/S & S&F MCCBs 63 Amps,4pole having rupturing capacity 16KA,415 volts including termination point for connection complete all as specified and directed make:- Havells/Legrand/GE power
1
-
-
Taking out U/S & S&F MCCBs 125 Amps,4pole having rupturing capacity 25KA,415 volts including termination point for connection complete all as specified and directed make:- Havells/Legrand/GE power
2
-
-
Taking out U/S & S&F MCCBs 400 Amps,4pole having rupturing capacity 36KA,415 volts including termination point for connection complete all as specified and directed make:- Havells/Legrand/GE power
1
-
-
M & L for replacement of on-load Change Over of capacity 400A, 4 Pole 415 volts with suitable ms sheet enclosure as recommended by OEM , suitable for wall mounted including termination point for connection complete all as specified and directed. Note the cost shall be included for fixing of existing size 400 sqmm 3 .5 core lt cable with lugs & thimbles made of copper matrial incoming and out going
1
-
-
Taking down U/S & Supply and fixing in replacement of butterfly valve of size 150mm dia as per exiting sample/ size, complete all as specified and directed by Engineer in Charge.
2
-
-
Taking down U/S & Supply and fixing in replacement of butterfly valve of size 200 mm dia as per exiting sample/ size, complete all as specified and directed by Engineer in Charge.
2
-
-
Supply and fill in replacement of Grease.in various motor/pump
10
-
-
Taking down U/S and S&F gland packing in to the pump and sluice valve of any capcity and size all as specified and as directed. The cost of including checking of galnd packing in pump houses situated at AF Stn Bhsiana on daliy basis if found absent plumber/ pump mechanic penallty willbe recovered @ 500 Per/day
15
-
-
Supply and replace NRV TIKKI 150 mm & 100 mm/80 mm dia suitable for CI body NRV/Foot valve including nut boltd washer rate included for removing and refixing in to the pipe in sump /pump house
40
-
-
M&L for attending complaint of finding mechanial and electrical fault in centrifugal/monoblock/booster pump and induction motor three phase and single phase in supply supply sysen regarding not lifiting of water by pump , no priming in pump tighting of nut bolts , leakge in pump , alignmnet of pump with motor with zero ibratin , NRV/sluice valve, tightning leakge, all as specified and directed by AGE E/M,
165
-
-
Taking out old unserviceable, broken, rusted name board of any type and size all as specified and Supply, Installation and Commissioning of LED Name board of MES AAHUJA PUMP HOUSE with engineers monogram of ACP sheet for board and background colour is blue and LED acrylic letters in white colour of 1.5 watt & LED driver of Hilite or equivalent make and size of board 15`x 4`incuding Material and labour for supports frame / clamp and back plate fabricated from MS square pipe of size 50x50mm for standing of board for leg purpose including nuts , bolts washers, welding bending cold or hot drilling holes for bolt in any shape of size as indicated or directed and inclusive of one primer coat , one under coat and one finishing of coat of paint complete all as specified and directed. Including cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping etc complete including point wiring with 1.5 sqmm FR PVC insulated cable multistranded coppper conductor drawn through & including ISI marked PVC conduits including 5 Amp switch & socket, box mudular type all as specified and directed
1
-
-
Supply and install level indicator board & float type level indicator for 02 lakh gallon underground tank including suitable float MOC SS 316-01 Nos, float wire rope , pipe bolts & nuts GI , inspection elbow cast aluminium with nylon pully with two bearings, board scale aluminium, indicator assembly MS electroplated with stove enamelled, depth 7 mtr, complete all as specified and directed by Engineer in Charge.
1
-
-
Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2mx1m, complete all as specified and directed by Engineer in Charge.
4
-
-
Taking out old unserviceable, broken, rusted name board of any type and size all as specified and Supply, Installation and Commissioning of LED Name board of MES MINI PUMP HOUSE with engineers monogram of ACP sheet for board and background colour is blue and LED acrylic letters in white colour of 1.5 watt & LED driver of Hilite or equivalent make and size of board 15`x 4`incuding Material and labour for supports frame / clamp and back plate fabricated from MS square pipe of size 50x50mm for standing of board for leg purpose including nuts , bolts washers, welding bending cold or hot drilling holes for bolt in any shape of size as indicated or directed and inclusive of one primer coat , one under coat and one finishing of coat of paint complete all as specified and directed. Including cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping etc complete including point wiring with 1.5 sqmm FR PVC insulated cable multistranded coppper conductor drawn through & including ISI marked PVC conduits including 5 Amp switch & socket, box mudular type all as specified and directed
1
-
-
Taking out old unserviceable, broken, rusted name board of any type and size all as specified and Supply, Installation and Commissioning of LED Name board of MES SILVER JUBILEE PUMP HOUSE with engineers monogram of ACP sheet for board and background colour is blue and LED acrylic letters in white colour of 1.5 watt & LED driver of Hilite or equivalent make and size of board 15`x 4`incuding Material and labour for supports frame / clamp and back plate fabricated from MS square pipe of size 50x50mm for standing of board for leg purpose including nuts , bolts washers, welding bending cold or hot drilling holes for bolt in any shape of size as indicated or directed and inclusive of one primer coat , one under coat and one finishing of coat of paint complete all as specified and directed. Including cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping etc complete including point wiring with 1.5 sqmm FR PVC insulated cable multistranded coppper conductor drawn through & including ISI marked PVC conduits including 5 Amp switch & socket, box mudular type all as specified and directed
1
-
-
S&F in replacement of battery chargr from ac to DC 12 Volt input Range: 170V to 270V Output voltage: Float Mode 13.3V to 13.5V DC; Boost Mode 13.8V to 14V DC Charging current: Float mode 0 amps to 3 amps; Boost mode 10 amps Naturally Air Cooled and wall mounting available Low Standby Power Consumption and High Efficiency. Make BIS/ISI Approved
1
-
-
M&L for opening air blower set twin lobe type of capacity 140 m3/hr with head of 0.65 mmwc make kirloskar rpm 1367 , blower & motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lath works all as specified at Filter plant at AF Stn Bhisiana Note :- Major Spares Parts will be measured & paid seperatly.as supply only
2
-
-
Supply only spare parts for Air blower follows:-
-
-
-
a)Supply Only Blower Bearing of Existing size
2
-
-
b)Supply Only Blower V Belt of Existing size
6
-
-
c)Supply Only Blower Pulley of Existing
2
-
-
d)Supply Only Blower Oil Seal & Packing
2
-
-
e)Supply Only Blower Sucton Fiilter
2
-
-
f)Supply and fill Blower Oil No. 90 Servo/Shell
10
-
-
Note No 01 : Contractor shall make his own arrangements to access various floors/bldgs and to provide tools and plants for taking down and refixing of pipe line/fittings of various material. The Contractor could not ask at only one or two site for execution of all CA quantities. They shall be bound to execute the work as per BoQ as directed by Engr-in-Charge.
Note No 02 :Contractor shall arrange 02 fitter, 01 Pump Mechanic and 03 helper for attending of complaint and they will be report to AGE E/M office on every day at 0800 Hrs to 1600 Hrs to execute the work as per BoQ. If contractor failed to deploy this labour, recovery @ Rs 500/- per person per day shall be made from contractor's dues. The contractor will produced attendance register duly signed by AGE E/M, and JE E/M and contractor alongwith RAR. Without these document payment will not made to the contractor.
Note No 01: All above mentioned items will be executed in different location/ pump house/ E/M installation and every meter of pipe/ pipe fittings will be executed on daily complaint basis in different location / bldg or as directed by Engr-In-Charge. The contractor could not ask at only one or two site for execution of all ca quantities , he will be bound to attend complaint as per user requirement or directed by Eng-In-Charge
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements