Military Engineer Services Tender

M&L for Light Shade Vitrified ceramic tiles 10mm thick (square/ rectangular) polished ,area of each tiles exceeding 0.42 sqm but n exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour with 15mm thick screed bed (1:4) complete all as specified and directed by Engr-in-Charge.

M&L for Coloured Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement match the colour with 15mm thick screed bed (1:4) complete all as specified and directed by Engr-in-Charge.

M&L for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring for cooking platform and flooring 20-25 mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in CM 1:6 incl making hole for gas pipe, complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone as in risers, steps, skirting, dado, 20-25 thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in CM 1:6 incl making hole for gas pipe, complete all as specified and directed by Engr-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and directed by Eng-in-Charge.

M&L for 10mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed by Eng-in-Charge.

M&L for 15 mm thick cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed by Eng-in-Charge.

M&L for 15mm thick Rendering on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement or as per manufacturer's instruction finished fair and smooth complete all as specified and directed by Engr-in-Charge. Note:- Water proofing compound shall be measured separately.

Supply only liquid water proofing compound, complete all as specified and directed by Engr-in-Charge.

M&L for 5 mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling, chajjas, roof projection etc complete all as specified and directed by Eng-in-Charge.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of wall surfaces complete all as specified and directed by Eng-in-Charge.

M&L preparation of plastered and unplastered surfaces of wall and applying two coats of oil bound distemper over 2mm wall care putty to achieve smooth finish complete all as specified and directed by Engr-in-Charge. Note:- OBD to be done by Roller.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforcement) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Eng-in-Charge.

M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick PCC floor Type D2 1:3:6 (40mm graded stone aggregate) complete all as specified and directed by Engr-in-Charge.

M&L PCC (1:4:8) type D2 using 40mm graded aggregate 100mm thick as in sub base finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for water proofing treatment to sunken floors of kitchen, toilets, laboratories,bath and WC's etc shall be as under:- (i) Application of Two component acrylic modified cementitious coating. (aa) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement litance, existing coatings and achieve a gripping profile that is clean, dry and free from litance and any other form of surface contamination. the installation instructions in manufacturer's published literature should be strictly compiled with, including but not limited to the following:- (bb) Chipping out any visible cracks in ' V- Groove' pattern as applicable. Special attention on this part cleaning of cracks and then filling those cracks with SIKA latex SBR 100 putyy/ Dr Fixit 302 SBR latex/ perma latex SBR / FOSROC Nitibond SBR latex/ Asian Paints latex as required. Final cleaning of surface with power grinder, wire brush, hair brush and vaccum pressure if required. (cc) Dampen all surfaces immediately ahead of application of Acrylic modified cemetitious coating of Sika Top seal - 107/brush Bond FOSROC/ Dr Fixit/ STP/ CICO. (dd) While the surface is still damp from saturation (SSD), apply one coat of acrylic modified cementitious coating of Sika Top seal- 107/ Brush bond FOSROC/ Dr fixit / STP/ CICO of viscosity as per manufacturer's instructions. (ee) Apply glass fabric sheet of Sika Fab 1 / FOSROC/ Dr Fixit/ STP while the first coat is wet. (ff) Once touch dry apply second coat of Acrylic modified cementitious coating of Sika Top Seal- 107/ Brush bond FOSROC/ Dr FiXit/ STP/ CICO of viscosity as per manufacturer's instructions on the entire area. (gg) Second coat shall be applied after 6-8 hrs of application of previous coat and in the direction right angle to the previous coat.

(hh) The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surface. (jj) It is essential to cure acrylic modified cementitious coating immediately after application ( minimum 6-8 hrs drying) for a minimum of 3 to 54 days to ensure full cement hydration and to minimize cracking. (kk) A protection plaster ( 12-15 mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture:- Sika Plastocrete plus/ FPSROC/ Dr Fixit / STP/ CICO confirming to IS 2645. Providing and applying a protection screed of 50 mm thick 1:4 cement sand mortar admixed with Sika plastocrtete over the applied water proofing coating on horizontal surfaces. Admixutre:- Sika Plastocrete Plus/ FOSROC/ Dr Fixit/ STP/ CICO confirming to IS 2645. Providing and applying a protection screed of 50mm thick 1:4 cement sand mortar admixed with Sika Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture:- Sika Plastocrete plus/ FPSROC/ Dr Fixit / STP/ CICO confirming to IS 2645. (ll) All the corners and joints should be pretreated with elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of make Sika Seal Tape S/FOSROC/Dr Fixit/STP. (mm) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations. (nn) waterproofing treatment has to be carried out through authorised applicators.

(i) All the joints of pipesand traps within sunken portion shall be selaed properly by Epoxy sealant.. (ii) All CI traps in sunken slabs to be enclosed with PCC 1:1.5:3 (min 15cm) all - round. (iii) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40 mm stone aggregate) complete all as specified. (iv) Providing drainage spout pipe GI 40mm dia bore light grade upto outside of outer wall ( Approx 450mm to 600 mm long) including cutting to existing wall and making good the disturbed surface complete all as specified and directed. (v) Providing 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm grade stone aggregate as in flooring for laying floor finish all as specified. Note:- Item No 23.02 (iii), (iv) & (v) shall be measured and paid seprately.

Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs complete all as specified and directed by Engr-in-Charge.

Demolition of mud in roof any thickness incl plastering & leeping removed complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymericweighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified and directed by Engr-in-Charge.

M&L 40 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in PCC padding over roof slab complete all as specified and directed by Engr-in-Charge.

M&L for 40mm thick Brick tiles including & laid over 15 mm thick screed bed in cement mortar 1:6 with Jointing & Pointing in cement mortar (1:3) mixed with 5% of crude oil by wt of cement complete all as specified and directed by Engr-in-Charge.

All as per item No 28 above but except brick tiles complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type B0 1:2:4 (12.5mm graded aggregate) in roof, kerbs, rounded or chamfered edges complete all as specified and directed by Engr-in-Charge.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed by Eng-in-Charge.

M&L for screed bed (1:6) or bedding layer of mortar 15mm thick for laying floor finishes complete all as specified and directed by Eng-in-Charge.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness with grey cement and no pigment M-35, complete all as specified and directed Engr-in-Charge.

M&L for 25 mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed Engr-in-Charge.

Demolition of cement concrete reinforced of any description and in any position, complete all as specified and directed by Engr-in-Charge.

M&L for use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed by Engr-in-Charge.

M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-Charge.

M&L for RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of affected concrete and steel surface as in ceiling of roof slab, beams by cleaning with metallic wire brush scrupiously and carrying out the following operations stepwise: (i) Applying rust remover solution on steel bars by using cotton waste swab or by brush and leave the surface for 15-30 minutes. Remove the loose rust particles by scrubbing with brush and wash the steel surface with water. (ii) Apply red oxide primer over cleaned steel surfaces. (iii) Apply epoxy bonding agent (adherent solution) over cleaned dust freed old concrete surface. (iv) Apply polymer mortar with the help of trowel in single or multilayer as an when required during application and finishing the surface even and smooth. Note:- (a) The bars which are corroded badly need to be strengthen by placing new bars by means of welding with proper splice length and will be measured and paid separately under appropriate item. (b) The rate of item includes necessary scaffolding, staging etc complete all as specified and directed by Engr-in-Charge.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings, complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

Dismantling of wall paneling and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

Supply and fix 6mm thick PVC hollow wall paneling plain/coloured/printed fixed with screws to wall and corner, edges of panels be sealed with appropriate arrangement, colour and pattern as approved Complete all as specified and as directed.

M&L for ceiling using 9mm thick gypsum based ceiling tiles with wheather resistance face on back side and vinyl finish including framework on the front fixed in 24mm GI armstrong frame work of grid 600x600 mm size, the members of snap grid frame work of GI/Steel section of 24mm wide with T-flanges, channels etc of white colour having rotary stiching on all members, i.e main runner, 1200x600mm cross tee galvanised with minimum thickness of 120 gms per/sqm passed through 500 hrs test and hanging the same with existing roof members such as rafters, pulins or other wooden members particularly provided for hanging pupose using 8mm dia mild steel bar of required length fixed with nut bolt of 50mm long and 10mm dia of neck with washer flat iron 50x6mm thick clamps etc to steel members, complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing incl connection, 15mm bore including cleaning of serviceable pipe for re-fixing complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing incl connection, 15mm bore unserviceable pipe for removal to store complete all as specified and directed by Eng-in-Charge.

S&F mild steel tubes, 15 mm bore, medium grade galvanized with all fittings and fixed to walls, ceiling or laid under floors incl excavation, complete all as specified and directed by Eng-in-Charge.

Taking up or down steel tubing incl connection, 20mm bore unserviceable pipe for removal to store, complete all as specified and directed by Eng-in-Charge.

Taking up or down steel tubing incl connection, 20mm bore including cleaning of serviceable pipe for re-fixing complete all as specified and directed by Eng-in-Charge.

S&F mild steel tubes, 20 mm bore, medium grade galvanized with all fittings and fixed to walls, ceiling or laid under floors complete all as specified and directed by Eng-in-Charge.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle, aluminium brackets for bottom support, including flush pipe 32mm bore fixing in position complete all as specified and directed by Eng-in-Charge

S&F in repairs flush pipe of polythene of low or high density PVC 32mm dia for low level cistern incl all joints complete all as specified and directed by Eng-in-Charge.

S&F in repairs fancy type 15mm bore bib tap cast copper chromium plated long body with crutch or butter fly handle, screwed down, screwed for iron pipe or bore brass ferrule complete all as specified and directed by Eng-in-Charge.

S&F in repairs fancy type pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Eng-in-Charge.

S&F in repairs 15mm bore CP brass mixer Hot & Cold for WHB/Sink complete all as specified and directed by Eng-in-Charge.

S&F in repairs vitreous china wash down water closet pan ORISSA pattern size 580x 440mm white with integrated foot rest, making connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Eng-in-Charge.

S&F in repairs Vitreous China wash down Water closet pan (pedestal pattern) "with plastic closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging divice (excluding flusing cistern and flush pipe) in repairs complete all as specified and directed by Eng-in-Charge.

S&F in repairs vitreous china wash hand basin,pedestal pattern white flat back, size 550mm x 400mm including mild steel brackets, including cutting for and pinning in ends of bracket , including fixing of all fittings (excluding of pillar cock, waste coupling and pvc waste pipe ) complete all as specified and directed by Eng-in-Charge.

S&F in repairs vitreous china wash hand basin, white flat back, size 550mm x 400mm including mild steel brackets, including cutting for and pinning in ends of bracket , including fixing of all fittings (excluding of pillar cock, waste coupling and pvc waste pipe )complete all as specified and directed by Eng-in-Charge.

S&F in repairs towel rail 600mm long PTMT and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed by Eng-in-Charge.

S&F 600x450mm bevelled edged mirror of selected quality glass , mounted on 6mm thick AC building board fixed with PVC rawl plugs and chromium plated brass screws with cup washer complete all as specified and directed by Eng-in-Charge.

S&F in repairs PVC cabinet size 450mmx325mmx120mm with looking mirror and making good the disturbed surface complete all as specified and directed by Eng-in-Charge.

S&F PVC connection 450mm long with brass nuts suitable for 15mm bore pipe complete all as specified and directed by Eng-in-Charge.

S&F PVC connection 300mm long with brass nuts suitable for 15mm bore pipe complete all as specified and directed by Eng-in-Charge.

S&F in repairs CP Jet for EWC including flexible pipe complete all as specified and directed by Eng-in-Charge.

S&F in repairs hand shower/ health faucet (ABS Chrome Plated) with 8mm dia, 1 metre long flaxible tube & wall hook complete all as specified and directed by Eng-in-Charge.

S&F Brass chromium plated shower rose 125mm size, complete all as specified and directed by Eng-in-Charge.

S&F in repairs of angle cock/stop cock spindle 15mm dia and length of spindle 50mm dia complete all as specified and directed by Eng-in-Charge.

S&F stainless steel soap dispensers with bracket, complete all as specified and directed by Eng-in-Charge.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min weight 60gms) complete all as specified and directed by Eng-in-Charge.

S&F toilet paper holder with flat recessed type stainless steel , chromium plated fixed with brass screws complete all as specified and directed by Eng-in-Charge.