Military Engineer Services Tender

Excavation in trenches in soft loose of soil not exceeding 1.5 mtr wide and not exceeding 1.5 metre in depth for taking out of unserviceable under ground cable complete all as specified and directed.

Returning, filling in, any type of soil and spreading, in layers not exceeding 25 cm thick complete all as specified and directed.

Removal of surplus soil (any type of soil obtained from excavation) to a distance not exceeding 50 metre and depositing where directed & complete all as specified and directed.

Supply and laying well burnt ,sub class 'B' brick old size for cable protection incl removing of old bricks complete all as specified and as directed.

Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified and as directed . Notes : (i) Excavation and earth work to be measured and paid separately). (ii) Thickness of 18 cms after punning shall be considered for payment.

Supply, laying, jointing, testing and commissioning in replacement of cable XLPE insulated , armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, laid in trenches, fixed by means of MS saddles on or fixed on poles including connection with proper lugs for 10 Sqmm 2 Core complete all as specifed and directed.

ditto all as per item No 9 above but 16 Sqmm 2 Core

ditto all as per item No 9 above but 16 Sqmm 4 Core

ditto all as per item No 9 above but 25 Sqmm 3.5 Core

ditto all as per item No 9 above but 35 Sqmm 3.5 Core

ditto all as per item No 9 above but 70 Sqmm 3.5 Core

ditto all as per item No 9 above but 185 Sqmm 3.5 Core

Supply and fixing in replacement 1100 volt grade heavy duty single core cable PVC insulated PVC sheathed with stranded copper conductor wire FRLS of size 2 x 1.5 Sqmm and 1 x 1.5 sqmm for connection purpose, ISI marked drawing through 20mm dia PVC pipe / conduit complete all as specified and directed.

Supply and fixing in replacement SMC pole junction box of size 300x200x105,dust proof, water tight weight acid resistence, corrosion proof insulated and shock proof fire retardant self extingushing, halogen & silica free non-Toxic material,UV resistance (UI subject 94:V2) with internally embedded gasket size of test certificate and verification by glow wire test in accordance with IEC60695-2-11 Cat No-K8250 with 6 Amps MCB SP neutral link with three phase copper busbar 63 amps TPN connector for connection of cable of suitable size complete all as specified.

Material and labour for MCB SP 6 to 32 Amps, 10 KA, C-curve complete all as specified.

Supply and fixing in replacment GI pipe light grade 40 mm bore for cable protection fixed to poles/along wall/floor/under road/across the drain or nallah including taking up old GI pipe complete all as specified and directed.

Supply and fixing in replacment GI pipe light grade 50 mm bore for cable protection fixed to poles/along wall/floor/under road/across the drain or nallah including taking up old GI pipe complete all as specified and directed.

Supply and fixing in replacment GI pipe light grade 80 mm bore for cable protection fixed to poles/along wall/floor/under road/across the drain or nallah complete all as specified and directed.

Supplying installing, testing and commissioning floor mounted LT panel outdoor type of suitable size 0.9x0.8x0.5 mtr cubical type factory made, weather and vermin proof made out of CRCA sheet 3 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs on angle iron 60x60x6mm each 60 cm long panel duly powder coacted heaving insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles,with cable gland and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded stone aggregate Powder Coated Spray painted from outside and inside with approved stove enameled grey paint two coats over one coat of red oxide primer including taking out oldunserviceable panel complete as under :- (i)  Aluminium bus bar strip of capacity 300 amps fixed on epoxy insulator - 04 Nos. (ii)  Incomming MCCB of current rating 200 Amps with adjustable thermal release 4 pole 415 volts 36 KA repturing capacity - 01 Nos. (iii)  Out going MCCB of current rating 125 Amps with adjustable thermal release 4 pole 415 volts 25 KA repturing capacity - 02 Nos. (iv) Out going Changeover On Load rating 100 Amps 4 pole 415,50Hz volts front operated - 01 Nos. (v) TPN MCB 63 Amp-01 Nos. (vi) MCB DP 40 Amp-02 Nos Make for srl no (ii),(iii),(iv) and (v) :-HPL/Indoasian/Havells/ABB (vi) Digital voltmeter (0-500 volt) 96x96m square type with inbuilt selector switch - 01 Nos (vii) Digital ampearmeter (0-600 amps) 96x96m squire type with CTs inbuilt selector switch - 01 Nos (viii) Set of phase indicator lamp R,Y,B with control MCB - 01 Set

Supply installng, testing and commissioning floor mounted LT panel outdoor type of suitable size cubical type factory made, weather and vermin proof made out of CRCA sheet 3 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs on angle iron 50x50x6mm each 45 cm long panel duly powder coacted heaving insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles,with cable gland and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded stone aggregate Powder Coated Spray painted from outside and inside with approved stove enameled grey paint two coats over one coat of red oxide primer including taking out old unserviceable panel complete as under.:- (i)  Aluminium bus bar strip of capacity 400 amps fixed on epoxy insulator - 04 Nos. (ii)  Incomming MCCB of current rating 200 Amps with fixed thermal fixed magnetic release 4 pole 415 volts 25 KA rupturing capacity - 01 Nos. (iii)  Out going MCCB of current rating 100 Amps with fixed thermal fixed magnetic release 4 pole 415 volts 25 KA rupturing capacity - 01 Nos. (iv)  Out going MCCB of current rating 63 Amps with fixed thermal fixed magnetic release 4 pole 415 volts 25 KA rupturing capacity - 02 Nos. (v)  Out going MCB TPN 63 Amp - 01 Nos. (vi) Digital voltmeter (0-500 volt) 96x96m square type with inbuilt selector switch - 01 Nos. (vii) Digital ammeter (0-600 amps) 96x96m square type with CTs inbuilt selector switch - 01 Nos (viii) Set of phase indicator lamp R,Y,B with control MCB - 01 Set.

Supply installng, testing and commissioning floor mounted LT panel outdoor type of suitable size cubical type factory made, weather and vermin proof made out of CRCA sheet 3 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs on angle iron 50x50x6mm each 45 cm long panel duly powder coacted heaving insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles,with cable gland and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded stone aggregate Powder Coated Spray painted from outside and inside with approved stove enameled grey paint two coats over one coat of red oxide primer including taking out oldunserviceable panel complete as under :- (i)  Aluminium bus bar strip of capacity 400 amps fixed on epoxy insulator - 04 Nos. (ii)  Incomming MCCB of current rating 160 Amps with fixed thermal fixed magnetic release 4 pole 415 volts 25 KA rupturing capacity - 01 Nos. (iii)  Out going MCCB of current rating 63 Amps with fixed thermal fixed magnetic release 4 pole 415 volts 25 KA rupturing capacity - 02 Nos. (iv)  Out going MCB TPN 63 Amp - 01 Nos. (v) Digital voltmeter (0-500 volt) 96x96m square type with inbuilt selector switch -01 Nos. (vi) Digital ammeter (0-600 amps) 96x96m square type with CTs inbuilt selector switch - 01 Nos. (vii) Set of phase indicator lamp R,Y,B with control MCB - 01 Set

Supply installng, testing and commissioning floor mounted LT panel outdoor type of suitable size cubical type factory made, weather and vermin proof made out of CRCA sheet 3 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs on angle iron 50x50x6mm each 45 cm long panel duly powder coacted heaving insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles,with cable gland and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded stone aggregate Powder Coated Spray painted from outside and inside with approved stove enameled grey paint two coats over one coat of red oxide primer including taking out oldunserviceable panel complete as under :- (i)  Aluminium bus bar strip of capacity 200 amps fixed on epoxy insulator - 04 Nos. (ii)  Incomming MCCB of current rating 100 Amps with fixed thermal fixed magnetic release 4 pole 415 volts 25 KA rupturing capacity - 01 Nos. (iii)  Out going MCCB of current rating 63 Amps with fixed thermal fixed magnetic release 4 pole 415 volts 16 KA rupturing capacity - 02 Nos. (v) Digital voltmeter (0-500 volt) 96x96m square type with inbuilt selector switch -01 Nos. (vi) Digital ammeter (0-600 amps) 96x96m square type with CTs inbuilt selector switch - 01 Nos. (vii) Set of phase indicator lamp R,Y,B with control MCB - 01 Set.

Material & labour earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt, earth electrode GI strip 32 x 6mm connected to GI earth plate electrode by means of bolts, nuts, check nuts and washers of galvanized iron and thimbles and other end of earth strip connected to test point and protected by galvanized iron light grade 50mm bore and GI pipe 20mm bore light grade with funnel and wire mesh for watering including necessary excavation and earth works. PCC chamber in cement concrete (1:3:6) type C-2 using graded stone aggregate and RCC cover in M-25 (Design mix) and all as shown in Electrical Plate No. 3 of MES Schedule (Part-I) of 2009 complete all as specified and directed. Notes : (i) Outer edge of earth pit will be 1.5m away from the outer edge of PCC chamber. (ii) Water pipe shall be provided in slanting position.

S&F for jointing and testing LT straight through (heat shrinkable) cable end termination joint suitable for LT cable 1100 volts grade 16 Sqmm to 70 Sqmm complete all as specified and as directed.

S&F for jointing and testing LT straight through (heat shrinkable) cable end termination joint suitable for LT cable 1100 volts grade 95 Sqmm to 185 Sqmm complete all as specified and as directed.

Boring of holes under road, pavement, hard standing by trenchless technique and necessary T&P for passing of LT/HT cables complete all as specified and directed.