Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 97,200Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_676298_1Bid Award Id
ViewTender No
GE FRD-63/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/
Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- Variation in profile size of frame ±5mm is allowed and contractor's quoted rate is deemed to include the same .
117.6
-
-
M&L for PCC 1:3:6, type C0 (using 12.5mm graded crushed stone aggregates) as in back filling of steel frames, bed blocks for fixing of hold fasts etc including necessary formwork complete all as specified and directed.
1.46
-
-
S&F factory made 35 mm thick 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of BWP commercial plywood or 12mm thick veneered particle board with commercial veneering on both faces .The size of rail and stiles as per IS: 1003(Part-1),kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed .
66.69
-
-
S&F factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars ,any numbers sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed .
44.46
-
-
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames / Chowkhat of size 45 x 85 mm comprising of virgin polymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- Variation in profile size of frame ±5mm is allowed and contractor's quoted rate is deemed to include the same .
57.6
-
-
S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed.
15.21
-
-
S&F pressed steel rectangular frames for built in cupboard doors, made out of mild steel sheet 1.0 mm thick with girth of frame 185mm including MS rawls plugs and fixing 100mm long butt hinges, medium weight cold rolled mild steel etc including two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed .
121.44
-
-
S&F pressed steel door shutters including stiffeners made out of mild steel sheet 1.0mm thick, cut to size, holes punched and welded seams including bending or turning up all around, mitered angle, one no locking arrangement as per Godrej pattern, two nos handle and applying two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed Note : (i) Measurement of door shutter shall be taken as exact size of cupboard opening (excluding frame and folded/ turned up portion) (ii) Stiffeners of 150mm girth and height equal to height of shutter made to shape as directed by Engr-in-charge. cost of these stiffeners shall be deemed to be included in the unit rate quoted for door shutters and no extra measurement/payment shall be made for the same.
37
-
-
Dismantling boarding,any description,fixed in any position with nails complete all as specified & directed.
22
-
-
M&L for 25mm prelaminated particle board,exterior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
22
-
-
M&L for 2nd class soft wood plain fillets ,exc 3 Sqcm and not exc 6 Sqcm sectional area,square, rectangular or triangular in section, clean swan, secured with nails or brads ,put together with glue pinned at joints complete all as specified and directed.
43.2
-
-
M&L for Ist class soft wood moulding as in cornices,picture rails and the like , not exc 6 Sqcm complete all as specified and directed.
36
-
-
S&F 100 mm long, Stainless Steel hinges with stainless steel steel screws complete all as specified and directed.
162
-
-
S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter 19 to 20mm thick comprising of virgin polymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900N (edge), minimum compressive strength 50 N/ mm ² ,modules of elasticity 850 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant .WPC to be laminated with PVC coil of minium 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed countersunk stainless steel screws complete all as specified and directed.
12
-
-
S&F in repair continous piano hinges, mild steel, bright finish or electrogalvanised , 30mm width, fixed with screws complete all as specified and directed .
32
-
-
S&F chromium plated decorative handle of size 150 mm fixed with screws complete all as specified and directed .
32
-
-
S&F magnetic catcher of size 40-50mm fixed with screws complete all as specified and directed.
18
-
-
S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.
24
-
-
S&F Aluminium anodised barrel tower bolts, 200 mm long of extruded section complete all as specified and directed.
120
-
-
S&F Aluminium anodised, cast type, handle 150 mm size complete all as specified and directed.
144
-
-
S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .
18
-
-
S&F aluminium alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .
36
-
-
S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .
60
-
-
S&F 75 to 80 mm long door silencer suitable for door upto 04 sqm ,fixed with steel screws of required nos complete all as specified and directed .
36
-
-
S&F anodised aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on aluminium (minium thickness of powder coating 50 micron) as per the specification. The top & bottom horizontal members and vertical members adjacent to walls shall be fixed with floor, ceiling, walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners including making arrangement for fixing guard bars & S&F PVC sleeves for guard bars complete all as specified and directed.
186
-
-
M&L for providing and fixing stainless steel (Grade-304) window grill guard bars etc made of hollow tubes,channels,plates etc including welding,grinding,buffing,polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts,decorative elements etc, of required size including making groove /drill with suitable fixing arrangement in RCC floor/staircase/brick wall complete all as specified and directed .
200
-
-
S&F anodised Aluminium window (glazed and gauzed both),side hung type without sash bars, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,anodised aluminium fitting such as peg stays 150mm long (01 no), hinges type B-21, 100mm long (02 Nos) suitable handle (01 No) with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed.
60.93
-
-
S&F Eye door viewer (magic eye) of size 25mm dia fixed in position for door shutters complete all as specified and directed
8
-
-
S&F door seal (Brush type) of width not less than 38mm and length exc 800mm but n.exc 1000m,fixed with screws complete all as specified and directed .
15
-
-
S&F stainless steel wire cloth, 0.40mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed .
57.14
-
-
M&L for 4 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .
30.47
-
-
S&F 4mm thick, figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed
1
-
-
S&F Mild Steel framed work such as grills, gratings etc. with ends of bars shoulderd and/or riveted, or forged into spikes, framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,cooler stand,ladder and similar work conforming to Fe290, Gde-E-165 complete all as specified and directed.
40
-
-
M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc primer complete all as specified and directed.
155.36
-
-
M&L for Mild steel plain black sheet 1.25 mm thick in covering to door shutters, steel gates and similar work, cut to size,edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc.as required complete all as specified and directed .
1.2
-
-
M&L for preparation of new or previously untreated steel surface of any description not exceeding 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
25
-
-
M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
244.53
-
-
Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed .
10.33
-
-
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying finishes complete all as specified and directed .
24
-
-
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying finishes complete all as specified and directed .
308
-
-
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm on vertical surface such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.
21
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .
314
-
-
S&F Glazed ceramic coloured tiles 450mmx300mmx7mm thick (colour and shade as approved) as in vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles over & including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed .
271
-
-
Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed .
3.97
-
-
M&L for 18 to 20mm thick Granite (of approved type and colour) work (table rubbed and polished) as in cooking platforms, stair case landing or steps and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with approved shade of granite including cutting and moulding the edges half round on exposed side complete all as specified and directed.
15.72
-
-
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
12
-
-
S&F Machine cut kota stone slab in flooring,cills, 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,cutting and mirror polishing over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed. Note:- Single piece of kota be used in the treads of staircase.
19.02
-
-
S&F Machine cut kota stone slab 20-25 mm thick as in skirting,steps,dado,& pillars, set and jointed in cement slurry over & including 15 mm thick rendering in cement mortar1:4 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .Note:- Single piece of kota be used in the risers of staircase.
4.99
-
-
Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed .
2
-
-
M & L for water proofing treatment to RCC sunken slab as specified below and as directed by Engineer in Charge:-
(a) Cleaning the surface with wire brush/coir brush, removing loose material like dust particles, dirt etc. (b) Rendering 15 mm thick in cement mortar 1:3 using water proofing compound on raised vertical surfaces. (c) Creating fillet covering of 50 x 50 mm with polymer modified mortar on the junction of slab and wall (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surface. (e) Provision of polyester reinforced coated net of 45gm/sqm, 2.5mm x 2.5mm mm immediately on above coating. (f) Apply second coating of two component modified polymer coating after 72 hrs upto 300mm above wall surface. (g) Laying concrete 1:4:8 over the coating as per requirement. (h) Joining the sanitary pipes with the waterproofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and sanitary pipe with non shrink cementatious grout. (k) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer.
4
-
-
M&L for PCC 1:5:10, type E-2 (Using 40mm graded crushed stone aggreegates) as in filling of sunken floors etc complete all as specified and directed .
2
-
-
M & L for 25mm thick plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate with WPC under floor over sunken complete all as specified and directed by Engineer-in-Charge.
4
-
-
S&F Mild steel galvanized tubing, 40 mm bore, medium grade with fittings laid on floor as spout pipe in sunken/ verandah/ Balcony etc complete all as specified and directed.
1.8
-
-
M&L for 75 mm thick cement concrete 1:3:6 type C2( using 40mm graded crushed stone aggregates) as in plinth protection/path finishing surfaces even and fair complete all as specified and directed .
45
-
-
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) as in floors (other than ground floors), beams, staircases, landing, chajjas,shelves and similar suspended work complete all as specified and directed .
1.5
-
-
M&L for RCC 1:2:4, type B1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies and in shelves complete all as specified and directed.
1.5
-
-
M&L for TMT bars 6 to 10mm dia and over, cut to length, bent to shape as required, including cranking, bending and binding with & including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .
70
-
-
M&L for use and waste of form work to soffits of suspended slab such as roof slabs, not exceeding 200mm thick, horizontal or sloping complete all as specified and directed .
12
-
-
Taking up or down 15mm dia GI/PVC tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed .
90
-
-
Taking up or down 20mm dia GI/PVC tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed.
250
-
-
Taking up or down 25mm dia GI/PVC tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed .
28
-
-
M&L for Steel water tubing of 15 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .
81
-
-
M&L for Steel water tubing of 20 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .
150
-
-
M&L for Steel water tubing of 25 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .
14
-
-
All as per item No 65 here-in-before but except tubes.
9
-
-
All as per item No 66 here-in-before but except tubes.
100
-
-
All as per item No 67 here-in-before but except tubes.
20
-
-
M&L for cutting (in brick walls) chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting exc 20cm girth complete all as specified and directed.
90
-
-
S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT float valves, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position including all necessary fittings complete all as specified and directed.
6
-
-
S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .
6
-
-
S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .
12
-
-
S&F in repair bib tap long body,fancy type ,chromium plated, with on/off handle, screwed down of iron pipe or for brass ferrule and fixed complete all as specified and directed.
24
-
-
S&F in repair 15mm bore bib taps, cast copper alloy, chromium plated with on/off handle, screwed down of iron pipe or for brass ferrule and fixed complete all as specified and directed.
6
-
-
S&F brass CP basin mixer,15mm bore, for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed .
6
-
-
S&F in repair brass CP wall mixer,15mm bore, for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed .
6
-
-
S&F in repair Stop valve/angle ball, cast copper alloy,chromium plated, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and directed.
24
-
-
S&F in repair 15mm dia stop cock ,cast copper alloy, chromium plated, concealed type with long shank and cup with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed .
6
-
-
S&F PVC connection, 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
24
-
-
S&F plate rack made of 1.00 mm thick stainless steel of size 900mm x 600mm x 250mm including angle iron brackets complete all as specified and directed .
6
-
-
S&F in repair sinks without drain board, made of 1mm thick stainless steel,overall size of sink 495mm x 420mm with bowl size 410mm x 330mm x 160mm, plugs, washers, waste pipe, union, waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed .
6
-
-
S&F in repair vitreous china counter wash basins, size 470x470mm, white flat back to be fixed on counter/ RCC slab including 32mm waste fittings, waste pipe, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified & directed.
6
-
-
S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, CI 'P' or 'S' traps 100mm & PVC flush pipes 32mm dia including connecting to trap and to flushing pipe, anti-syphonage pipe etc including all joints and making good to floor complete all as specified and directed.
6
-
-
S&F Cast iron 'P' or 'S' trap, bore of pipe 100 including jointing to waste pipe, fixed in plain cement concrete 1:2:4 type B1 complete all as specified and directed .
6
-
-
S&F 10 litres PVC,valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
6
-
-
S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed.
6
-
-
S&F 600mmx450mm looking mirror of selected glass 5mm thick mounted on 6mm thick commercial ply wood with PVC/ wooden moulding beading fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and directed .
6
-
-
S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed.
6
-
-
S&F in repair brass chromium plated tubular towel ring 150mm dia, fixed with CP brass screws including wooden/plastic beads complete all as specified and directed.
6
-
-
S&F PTMT soap tray, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
12
-
-
S&F stainless steel solid body peg set of six,fancy type ,fixed in position with steel screws complete all as specified and directed.
18
-
-
S&F in repair MS powder coated decorative drapery rod (colour as approved) 25mm dia of approved pattern & design including decorative knobs (wall side and free side) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and directed.
70
-
-
Taking down eaves gutters and rain water pipe (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
36
-
-
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches/in floors/fixed to walls including fixing clamps with nut and bolts complete all as specified and directed .
36
-
-
S&F PVC (SWR) bends any radius ,110mm bore complete all as specified and directed.
6
-
-
Dismantling CI/PVC pipe of 100 / 75 mm dia alongwith fittings ,below or above GL/laid in floors/fixed to walls jointed in cement mortar complete all as specified and directed.
52
-
-
S&F 100mm dia cast iron soil, waste and vent pipe, in any length with or without ears with cement joints, laid in trenches/in floors or fixed to walls complete all as specified and directed .
22
-
-
S&F 75mm dia cast iron soil, waste and vent pipe, in any length with or without ears with cement joints, laid in trenches/in floors or fixed to walls complete all as specified and directed .
30
-
-
S&F HR bends (any radius), diminishing pieces or tapers, bore of pipe 100 mm fitted with oval access door complete all as specified and directed .
2
-
-
S&F in repair CI bends, diminishing pieces or tapers, bore of pipe 75 mm complete all as specified and directed .
4
-
-
S&F in repairs Cast iron floor trap, long neck, 75 mm dia with stainless steel grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and directed .
24
-
-
S&F 100mm bore, cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch with oval access door complete all as specified and directed .
6
-
-
S&F 75mm bore, cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch with oval access door complete all as specified and directed .
12
-
-
S&F in repair cast iron cowl 100mm bore, complete all as specified and directed .
2
-
-
M&L for salt glazed stoneware gully traps of size 150x150mm,square of round mouthed, type 'P' complete all as specified and directed .
9
-
-
M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
1015
-
-
M&L for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
400
-
-
M&L for rendering 15 mm thick in cement mortar 1:4 mixed with WPC on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed . Note:- WPC shall be measured and paid separately as "supply only".
507.36
-
-
M&L for rendering 5mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.
115
-
-
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) following the under layer with scratching tool, applying cement slurry on the under layer of cement @ 3 Kg per square metre and top layer 15mm thick in cement mortar 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).
110
-
-
M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.
165
-
-
M&L for Acrylic polymer base damp-proof coating system with two component ready to use acrylic polymer modified damp-proof coating shall be carried out as mentiond below complete as per specifications : (i). SURFACE PREPARATION: Remove the existing plastered surface with efflorescence/ seepage area. Non-moving cracks having width upto 5 mm must be filled with Polymer based crack filler.
(ii). APPLICATION: Apply acrylic polymer base damp proof coating by brush roller over SSD surface. Apply the first coat of damp proof coating with a paintbrush directly on the surfaces. Allow to dry for a minimum 2-3 hrs. Apply subsequent second layer after drying. The first coat and second coat must be applied in perpedicular direction. The coverage must be atleast 1.2 sqm/kg/coat. The mixing for two component, if required, shall be done as per manufactures specifications. Rendering to be carried out after approval of Eng in charge and shall be paid seprately.
Note : Treatment shall be carried out through Authorized applicators only
117
-
-
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion (white/tinted) after finishing the surfaces with a coat of wall care putty by hand roller complete all as specified and directed .
304.04
-
-
M&L for complete removal of existing treatment of old decorated surfaces of wall by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of distemper oil emultion (white/tinted) after finishing the surfaces with a coat of wall care putty by hand roller complete all as specified and directed.
626.3
-
-
M&L for complete removal of existing treatment of old decorated surfaces of ceiling by mechanical sander /manual method, brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash complete all as specified and directed.
168.06
-
-
M&L for preparation of newly plastered or unplastered surfaces of ceiling and applying two coat of distemper oil emulsion (white/tinted) after finishing the surfaces with a coat of wall care putty by hand roller complete all as specified and directed .
300
-
-
M&L for complete removal of existing treatment of old decorated surfaces of walls by mechanical sander/ brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts, treating oil & greasy spots,filling depression to make smooth surfaces with wall care putty and applying two coats of Acrylic smooth exterior paint over and including one coat of exterior primer complete all as specified and directed.
607.8
-
-
M&L for preparation of newly plastered or unplastered surfaces of wall, soffits / facia of chajja/ roof slab and applying two coats of Acrylic smooth exterior paint over and including one coat of exterior primer complete all as specified and directed.
390
-
-
M&L for preparation of newly plastered or unplastered wall surfaces and applying three coats of white wash complete all as specified and directed .
95.96
-
-
M&L for complete removal of existing treatment of old decorated surfaces of wall, soffits / facia of chajja/ roof slab by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts , treating oil and greasy spots and applying two coats of white wash complete all as specified and directed.
250
-
-
M&L for applying one coat of synthetic enamel paint on old painted steel surface of any discription over 10 cm width or girth after prepration of surface complete all as specified and directed .
10
-
-
M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
5
-
-
M&L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work etc complete all as specified and directed .
1
-
-
Dismantling of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
4
-
-
M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed .
31.85
-
-
All as per Srl item No. 127 here-in-before but except bricks.
0.5
-
-
M&L for plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.
31.9
-
-
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.
364
-
-
M&L for hard core of gauge not exceeding 63mm using broken stone or boulders, deposited, spread and leveled in layers not exc 15cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed .
31.9
-
-
M&L for Machine pressed Precast cement concrete interlocking coloured ( glossy finished / ruberised paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with and including 40mm thick sand cushining complete all as specified and directed .
180
-
-
M&L dismantling of depressed Precast cement concrete interlocking paver block of any shape and size and refixing the same after making good with PCC/hard core and removing serviceable blocks to store and rubbish off the premises to a distance n exc 500 mtr complete all as specified and directed .
40
-
-
M&L Pre-cast cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregates ) as in kerb stone, set in cement mortar 1:6. including necessary form work , excavation for embedding blocks in ground to depth as directed and finishing exposed surface even and smooth complete all as specified and directed .
2.4
-
-
M&L for preparation of new plastered /concrete surface and painting with two coats of synthetic enamel paint (white/golden yellow) over a coat of primer complete all as specified and directed.
10.4
-
-
Excavation in trenches in any type of soil not exceeding 1.5m deep and 1.5m wide, for foundation etc or manholes,piers,shafts etc not exceeding 10 Sqm on plan or for laying cables/poles foundation / stay assembly etc and getting out complete all as specified and directed.
120.47
-
-
Returning, filling in,including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed .
89.91
-
-
Removal of surplus soil to a distance not exceeding. 50 m & depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed .
68.78
-
-
Demolition and breaking up drain pipe (Salt glazed stoneware, AC or Reinforced concrete) 150 mm dia, set in cement mortar including demolition of haunching concrete and disposal off rubbish to a distance not exceeding 50M complete all as specified & directed .
152
-
-
M & L for salt glazed stoneware drain pipe, 150 mm dia, grade 'A' ,laid in trenches ,jointed and tested in foul condition complete all as specified and directed .
22
-
-
M&L for 100 mm thick Concrete bed to drain pipes using PCC 1:3:6 type C-2 40mm graded stone aggregate including packing under haunching against the sides of pipe after laid & tested for 150mm bore of pipes complete all as specified and direced.
152
-
-
M&L for providing precast cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) as in louvers and jallies in between pillars, 35mm thick (measured solid) including all moulding but excluding frame and set in cement mortar 1:4 complete all as specified and directed.
25
-
-
M&L preparation of new or previously untreated concrete surfaces over 10cm width or girth ,not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed
15
-
-
Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material to a distance n.exc 100m from the starting point complete all as specified and directed
125
-
-
Demolition of mud/soil/mud phuska in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of ) and disposal of retrieved material to a distance n.exc 100m from the starting point complete all as specified and specified
10
-
-
M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in coping, benching of manhole, roof kerbs or mud stops, rounded or chamfered angles complete all as specified and directed.
6.55
-
-
M&L for 40mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) with WPC as in padding course and similar works on roof slab, levelling to achieve specific slope including slightly rounded or chamfered angles including necessary formwork ,finishing surfaces even and smooth without using extra cement complete all as specified and directed. Note : WPC will be measured and paid separately
125
-
-
M&L for Rendering 10 mm thick in cement mortar 1:4 with WPC on roof, fair faces of brick work or concrete surfaces all as specified and directed . Note : WPC will be measured and paid separately
125
-
-
Supply only Liquid water proofing compound.
30
-
-
M&L for Roof Treatment as specified below and as directed :
(a) Cleaning, washing of surface and removing all existing bitumen coatings/ APP membrane completely with intense wire brushing or high speed water jet. Surface should be free from any loose paint, dust or grease.
(b) All cracks upto 3mm at corner joints, channels and parapets should be treated with crack seal and bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortars.
(c) Applying one coat of PrimeSeal/ Epoxy Primer/ShaliUrethane BTD White diluted with potable water in the ratio of 1:1 and apply @ 0.40 kg/ sqm (0.20 kg BTD+0.20 Kg water)
(d) Laying polyster reinforced fiber net/50 gsm Geotextile mesh, upto 300 mm on walls.
(e) Applying three coat of HydroShield PUD microfibre reinforced UV resistent polyurethane (solid content 68% ) / Damp Proof ultra UV Stable fibre reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers (Solid content 55%)/ SmartCare PU Magnum elastomeric waterproofing coating based on hydrophobic polyurethane (solid content 85%)/Single Component Elastomeric Liquid Membrane ShaliUrethane BTD White/coloured (Elongation 400% ± 50, Solid Contents 80% & Specific Gravity @ 30 OC 1.5 ± 0.03) @ total 2.00 Kg per sqm in two coats for maintaining thickness of 1.5mm, with paint brush/ roller upto 300 mm on walls.
(f)) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer. Note : (i) The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment (iii) WPC shall be measured and paid seperately.
150
-
-
Excavating in post holes each not exc 0.50 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exc 25cm and removing surplus soil to a distance not exc 50m and making good surface all as specified`and directed .
12
-
-
M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundation,filling & mass concrete complete all as specified and directed
3.7
-
-
S&F structural steel work in tubular pole including special shaped washer etc complete using ERW or incuction butt welded tubes conforming to I.S. 1161-1998 grade St -240 complete all as specified and directed .
430
-
-
S&F Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates conforming to Fe-410-W(Gde-E-250, quality-A) complete all as specified and directed
865
-
-
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
103
-
-
M&L machine pressed, precast concrete interlocking coloured paver block, any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment laid dry as in floor / berm / path etc complete all as specified and directed .
184
-
-
M&L for sand filling under floor with washed and screened dry fine river sand including watering, well ramming and consolidation complete all as specified and directed
4.6
-
-
S&F DWC HDPE pipe 150mm dia (172mm OD) ,stiffness class SN 8, (ISI marked) along with necessary jointing materials i.e collars/couplers/tees/union/socket rings etc , laid, jointed and tested complete all as per latest IS specifications complete all as specified and directed.
132
-
-
S&F Reinforced concrete pipes of size 300mm (internal dia),class NP-2 (ISI marked) laid, jointed and tested complete with collar in foul condition all as specified and directed .
10
-
-
M&L for 150 mm thick Concrete bed to drain pipes using PCC 1:3:6 type C-2 40mm graded stone aggregate including packing under haunching against the sides of pipe after laid & tested for 150mm bore of pipes complete all as specified and direced.
10
-
-
M&L for 75 mm thick plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.
63.7
-
-
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and directed .
75
-
-
S & F Factory made SFRC (Steel fiber Reinforcement Concrete ) Manhole cover (without frame) medium duty 560mmx560mm x70mm thickness including 2mm thick flat iron frame all round complete all as specified and directed by Engineer in Charge.
14
-
-
M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
42
-
-
M&L for Cutting into existing manholes for connecting new drains,making good to pipe and rendering,cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed by Engineer in Charge.
2
-
-
Taking down carefully existing aluminium/copper point wiring for light, fan, socket or power bell complete with fittings such as Switches, sockets, ceiling roses, holders, call bells & making good the disturbed surfaces of walls, matching the colour with existing surface complete all as specified and directed.
Note : Rate for making good shall be deemed to be included in above item rate.
188
-
-
Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLS with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed conduit of suitable size with all accessories such as bend, reducers, MS hooks, MS junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switches, sockets, fan regulator etc, covered with 2.8mm thick plastic laminate Hylem / Anchor top cover sheet of required colour, fixed with brass screws and cup washers, painting terminal boxes inside and outside with one coat of red oxide primer including continuous earth wire of size 1.5 Sqmm PVC stranded copper conductor unsheathed, insulated, stranded (Green colour) connected to common earth point dolly for for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed .
113
-
-
All as per item No 167 here in before but one light point controlled by two way swtiches complete all as specified and directed by Engineer in Charge.
3
-
-
All as per Ser item No 167 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on same board with other switches complete all as specified and directed .
24
-
-
All as per Ser item No 167 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on independent board complete all as specified and directed .
24
-
-
All as per Srl item No. 167 here-in-before but for one bell point controlled by one bell push complete all as specified and directed
6
-
-
All as per Srl item No. 167 here-in-before for Switch socket combination (multi purpose) 6 Pin 15 Amps 230 volts point to be controlled by one switch and wiring with 2.5Sqmm FRLS PVC unsheathed copper conductor and FRLS cable 2.5 Sqmm PVC insulated earth wire on independent board.complete all as specified and directed .
18
-
-
S&F PVC Lamp holder with back plate suitable for LED 5 to 20 watt bulb / batten fittings complete all as specified and directed .
42
-
-
S&F LED bulb 1 x 10 watt Lamp having luminous efficiency warranty 2 years complete all as specified and directed .
42
-
-
S&F complete set of tube light fitting, 1x20 watt LED (4 feet long), 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.
24
-
-
S&F complete set of tube light fitting, 1x10 watt LED (2 feet long), 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.
6
-
-
S&F ceiling rose, three terminals, PVC polycarbonate, isolated body with bakalite 20mm back plate complete all as specified and directed .
42
-
-
S&F Sub main wiring with two runs of single core PVC FRLS sheathed, insulated, copper cable of 6 Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 6 Sqmm for continous earth wire drawn into existing PVC concealed conduit complete all as specified and directed Note :- Two runs of 6 Sqmm copper cable and one run of 6 sqmm copper wire earth continuty conductor shall be measured as one length)
110
-
-
S&F in replacement Modular switch 1 way 6 amps, one module complete all as specified and directed.
161
-
-
S&F in replacement Modular socket 6A /16A - 2/3 pin combined, 2 module complete all as specified and directed.
48
-
-
S&F in replacement Modular switch 1 way 16 amps, one module complete all as specified and directed.
18
-
-
S&F in replacement Modular socket 6A -2/3 pin combined, 2 module complete all as specified and directed.
18
-
-
S&F in replacement Modular switch 2 way 6 amps, two module complete all as specified and directed.
6
-
-
S&F in replacement Modular bell push 6 amps, one module complete all as specified and directed.
6
-
-
S&F Bell, ding dong, AC 230V, single pole complete all as specified and directed.
6
-
-
S&F in repair factory made epoxy polyester powder coated distribution board TP&N ,4 ways (VTPN DB), double door,(concealed flush to wall) (IP-42 protection) fabricated from minimum 1.2 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 250 Amps bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with space for provision for 4 pole MCCB as incommer and outgoing MCBs as required at site and conforming to IS: 8623 along with cable end box including making good disturbed surface complete all as specified and directed. NOTE: (a) MCCBs and MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of BoQ.
1
-
-
S&F Sheet metal enclosure for DBs,SPN, double door, 230 Volts,12 ways with 200 amps rated bus bar complete all as specified and directed .
6
-
-
S&F MCCB 4 Pole,adjustable type ,415 V, 100 Amps with breaking capacity 16 KA complete all as specified and directed.
1
-
-
S&F MCB SPN 40 amps 240V 'B' curve with breaking capacity 10 KA in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
6
-
-
S&F MCB SP 40 amps 240V 'B' curve with breaking capacity 10 KA in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
6
-
-
S&F MCB SP 5 to 32 amps 240V 'B' curve with breaking capacity 10 KA in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
60
-
-
M&L for Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, buried directly in ground vertically (depth of pit not less than 2.25m below normal ground level), with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to electrical equipment/GOD/LA and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI medium grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of precast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Schedule Part-I (2009), complete all as specified and directed. Note(s):- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with TMT bar 8mm dia both ways @100c/c.
(ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include earth lead and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately. (iv) Earth resistance should be less than 3Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt. (v) Quoted lump sum / rate shall be inclusive of above all provisions.
1
-
-
M&L for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.
5.67
-
-
Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.
400
-
-
Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 16 Sqmm, 4 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, including taking out existing one complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.
100
-
-
S&F in repair energy efficient LED Security light fitting of 25W, pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/ roadway luminaire, with driver including electric connection, complete fitting with all accessories on and including bracket of 40mm dia,light grade ,GI pipe ,1.20 m and connecting with twin core twisted flexible copper conductor cable 1.5 Sqmm and with following specifications complete all as specified and directed :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max15%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the same make as of the luminaire.
(j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Morethan 80 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12Hrs
2
-
-
M&L in repair for Steel water tubing of 25 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .
20
-
-
S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 25 mm dia of pipe complete all as specified and directed.
6
-
-
M&L in repair for Steel water tubing of 40 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .
10
-
-
S&F in repair 1X10 watt LED retrofit type bulk head fitting luminaries, die cast, aluminium alloy body, heat resistant, prismatic glass cover with specially designed gasket etc complete with all accessories and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 HZ complete all as specified and directed.
9
-
-
Supply & fixing Energy efficient Ceiling fan complete with blades, down rods, remote & accessories, 230 V,1200mm sweep, minimum air delivery 245 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) including writing of MES number (Black, Roman, Italic or Indian) n. exc 30cm height complete all as specified and directed .
18
-
-
Supplying and fixing and commissioning of electric water heater (Gyser) storage type ABS body of capacity 25 ltrs, BEE appreoved 5 star rating, 230V,single Phase, AC supply inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined quoting complete with all accessories such as safety valve thermostate NRV, connection piece PVC connection for hot and cold water 3 core PVC insulated PVC sheated copper conductor flexible cable including 15 Amp plug suitable for existing socket and fixing material, 04 Nos nut bolt grouting in wall in PCC(1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed.
6
-
-
Taking down and Refixing only electronic / electric meter ,single phase, complete with accessories, any size, connecting up with and including two core copper flexible wire not less than 0.5 mtr for connecting from incoming to outgoing any size complete all as specified and directed.
6
-
-
S&F exhaust fan ,steel body, AC single phase, 4 blades with self closing GI louver shutter suitable for operation on 220/230 volts of 300mm sweep and including three core copper flexible wire 1.00 mm dia drawn into and including PVC flexible conduit and hanging on wall with 4 Nos steel fasterners 10mm dia & 100mm long including wall hole and making good the disturbed surfaces as per existing complete all as specified & directed .
6
-
-
Taking down and Refixing only exhaust fan complete with accessories, any size, connecting up with and including three core copper flexible wire not less than 0.5 mtr for connecting from ceiling rose/connector to exhaust fan any size complete all as specified and directed.
6
-
-
S&F sub main wiring with two runs of single core PVC, FRLS sheathed, insulated, copper cable of 4Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 4Sqmm for continous earth wire drawn into and including concealed conduit of suitable size not less than 20mm dia complete all as specified and directed . Note :- Two runs of 4 Sqmm copper cable and one run of 4 sqmm copper wire earth continuty conductor , conduit with accessories shall be measured as one length)
60
-
-
S&F Socket Residual Current Device (SRCD) with steel enclosure including MCB,SPN 20 Amps,240 V, AC supply & plug top complete all as specified and directed.
Havells Cat Part No DHDDCDP025202003 or equivalent in Makes as specified in PS.
6
-
-
S&F in repair PVC non metallic rigid conduit, 25 mm external dia (medium grade) ISI marked exclusive of boxes but inclusive of all tees, bends, reducer, bell mouth tube ends and fixing accessories, concealed including cutting chases in wall, floor and making good all disturbed surfaces matching with existing surfaces complete all as specified and directed. Note :- A Sum of Rs.64,301.90 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 39 & 40 (Schedule of credit) of Tender Documents.
100
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements