Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 2,85,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_656142_2Tender No
CWE BTD/TOKEN-39/2023-24Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete and disposal off rubbish material at a distance exceeding 2.5 Kilometre and not exceeding 5.00 Kilometre as directed by Engineer-in- charge.
16
-
-
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and disposal off rubbish material at a distance exceeding 2.5 Kilometre and not exceeding 5.00 Kilometre as directed by Engineer-in- charge.
33
-
-
Taking down 15mm bore pipe of any description complete all as specified and directed.
170
-
-
Taking down 20mm bore pipe of any description complete all as specified and directed.
100
-
-
Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.
160
-
-
Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.
100
-
-
Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate and disposal off rubbish material at a distance exceeding 2.5 Kilometre and not exceeding 5.00 Kilometre as directed by Engineer-in- charge. .The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.
44
-
-
Dismentalling water tanks of exc 500 ltrs and n exc 1000 ltrs capacity water storage tanks complete all as specified and directed.
12
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed by Engineer-in- charge.
980
-
-
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and disposal off rubbish material at a distance exceeding 2.5 Kilometre and not exceeding 5.00 Kilometre as directed by Engineer-in- charge.
2800
-
-
Taking down rain water pipe and even gutters any size and pattern including all fittings including removal from site complete all as specified and directed.
240
-
-
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each as doors, windows and ventilators and removal from site complete all as specified and directed.
412
-
-
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each each as doors, windows and ventilators and removal from site complete all as specified and directed.
112
-
-
Supply and fixing Pressed steel frames with thickness of steel sheet 1.25mm for doors with one or more rebates with and including hinges, lock strike plate, fixing lugs, etc., size of frame 125mm x 60mm including one shop coat of priming complete all as specified and as directed by Engineer-in-charge. Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.
184
-
-
Supply and fixing Pressed steel frames with thickness of steel sheet 1.25mm for doors with one or more rebates with and including hinges, lock strike plate, fixing lugs, etc., size of frame 105mm x 60mm including one shop coat of priming complete all as specified and as directed by Engineer-in-charge. Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.
244
-
-
Supply and fixing Pressed steel frames with thickness of steel sheet 1.25mm for doors with one or more rebates with and including hinges, lock strike plate, fixing lugs, etc., size of frame 75mm x 60mm including one shop coat of priming complete all as specified and as directed by Engineer-in-charge. Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.
168
-
-
Material and Labour for PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate as in back filling of pressed steel chowkhats single or double rebated or for fixing hold fasts etc complete all as specified and as directed by Engineer-in-charge.
7.88
-
-
Supply & fixing 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in- charge.
155
-
-
Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (Bonsum/ Hollock) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. Note:- Wire gauze/ glass shall be measured and paid separately.
65
-
-
Supply and Fixing Stainless steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm and fixed with tinned tacked or galvanized steel wire staples complete all as specified and as directed by Engineer-in- charge.
46
-
-
Supply & fixing repairs 300mm mild steel ordinary rat tail rod springs (helical spring) , including roller & roller plate, fixed with screws/welding to steel frames/chowkats, complete all as specified and as directed by Engineer-in- charge.
36
-
-
Supply and fixing mild steel sliding door bolts with hasp and staple, length of bolt 300mm, plate type, stove enameled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed, complete all as specified and as directed by Engineer-in-charge.
84
-
-
Supply and fixing mild steel barrel tower bolts, 200 mm long, stove enamelled black with bright bolts and fixed complete all as specified and as directed by Engineer-in-charge.
196
-
-
Supply and fixing mild steel pressed handles, 150 mm long, oval type, stove enamelled black complete all as specified and as directed by Engineer-in-charge.
196
-
-
Material & Labour Factory made steel window Box type using ERW hollow 'P' section comprising double frame for and including gauged and Skeleton shutter jointed internally with flat iron 40mm x 4mm complete with and including Guard bar grill made out with 8mm square bars, fixed horizontally @ 10cm c/c with and including one shop coat of red oxide zinc chromate primer , including providing hinges,pivots, handle, tower bolts, stops, lugs,steel peg stay etc. complete all as specified and directed. Note :- (i) Weight of steel sections , flat iron 40mm x 4mm, hinges,pivots, Guard bar grill made out with 8mm square bars ,handle, tower bolts, stops, lugs,steel peg stay shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of steel sections , flat iron 40mm x 4mm, hinges,pivots, Guard bar grill made out with 8mm square bars ,handle, tower bolts, stops, lugs,steel peg stay at site.(ii) During the weighing of steel sections , flat iron 40mm x 4mm, hinges,pivots, Guard bar grill made out with 8mm square bars ,handle, tower bolts, stops, lugs,steel peg stay ,the weight of one shop coat of red oxide zinc chromate primer shall not be considered for weight but the rate of material and labour for providing one shop coat of red oxide zinc chromate primer is included in this item and nothing shall be paid extra on this account.(iii) The board shall be duly countersigned by GE shall enclosed with Final Bill (iv) Glazing and wire mesh shall be measured and paid seperately.
6000
-
-
Material & Labour 3.0mm thick Sheet glass,ordinary quality and glazing with oil putty in
square n exc 0.5 sq. m in each pane fixed with oil putty or wooden beads including Provn of glazing pins/spring clips wherever necessary complete all as specified and directed.
105
-
-
Material & Labour Pressed steel shutter for cupboad with sheet thickness not less than 1.2 mm made to shape with and including locking arrgangement, handles and one shop coat paint complete all as specified and directed.Note :- (i) Weight of Pressed steel shutter , locking arrgangement & handles shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of Pressed steel shutter , locking arrgangement & handles at site.(ii) During the weighing of Pressed steel shutter , locking arrgangement & handles ,the weight of one shop coat of paint shall not be considered for weight but the rate of material and labour for providing one shop coat of paint is included in this item and nothing shall be paid extra on this account.(iii) The board shall be duly countersigned by GE shall enclosed with Final Bill
1000
-
-
Material and labour for Providing and fixing aluminium work with Polyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conformikng to IS:733 and IS :1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions i.e at top , bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including aluminium cleat angle, aluminium snap beading for glazing/ paneling , C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-charge .
Note :- (i) Weight of aluminium sections , aluminium cleat angles & aluminium snap beading shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of aluminium at site.
(ii) The rate of material and labour for providing the EPDM rubber, neoprene gasket , C.P. brass / stainless steel screws are included in this item and nothing shall be paid extra on this account. (iii) During considering the weight of aluminium sections , aluminium cleat angle & aluminium snap beading , the weight of EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws shall not be considered for measurments and payments. Only the weight of the aluminium sections , aluminium cleat angles & aluminium snap beading shall be considered and measurment and payment shall be made accourdingly. (iv) During the weight of aluminium sections , aluminium cleat angle & aluminium snap beading ,the weight of polyester powder coating 50 micron shall not be considered for weight but the rate of material and labour for providing polyester powder coating 50 micron is included in this item and nothing shall be paid extra on this account.(vi) Powder coated butt hinges, aluminium handles & aluminium peg stays shall be measured and paid seperately under respective itmes of Schedule'A' BoQ.(v) Glazing /Paneling and wire mesh shall be measured and paid seperately. (v)The board shall be duly countersigned by GE shall enclosed with Final Bill
100
-
-
Supply & fixing for 4 mm thick, figured glass, pin head type and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in- charge.
15
-
-
Material & Labour for painting to new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint including preparation of surfaces complete all as specified and directed.
150
-
-
Material & Labour for painting to new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer including preparation of surfaces complete all as specified and directed.
210
-
-
Material & Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed.
475
-
-
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.
3200
-
-
Material & Labour Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 Sqm but not exceediing 0.18 Sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.
280
-
-
Material and labour for Glazed ceramic coloured tiles of size 450mmX 350mm, 7mm to 8mm thick, as in vertical surface such as skirting / Dado set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.
700
-
-
Material & Labour Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.18 Sqm but not exceediing 0.38 Sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.
3200
-
-
Material & Labour for Non Skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, , set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, as in skirting /Dado. with and including 10 mm thick rendering in cm 1:4 complete all as specified and directed.
70
-
-
Supply & Fixing in repairs Drapery rod (conduit) of ABS plastic duly powder coated of dia not less than 25mm of approved shade as decided by Engr-in-Charge including standard MS powder coated brackets fixed to walls with rawl plugs and steel screws complete all as specified and directed.
165
-
-
Material and Labour for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces of walls and finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in- charge.
1800
-
-
Material and Labour for Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls and finishing the surface even & fair without using extra cement with Integral water proof compound as per manufacturer's instruction complete all as specified and as directed by Engineer-in- charge. Note: Integral water proof compound shall be measured and paid seperately as supply only under appropriate item of Schedule'A' BoQ.
1506
-
-
Material and Labour for Rendering 10 mm thick in cement mortar 1:3 on celing , finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
300
-
-
Material and Labour for Rendering 5 mm thick in cement mortar 1:3 on celing , finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
200
-
-
Material and Labour for Complete removal of existing treatment of internal wall (any number of layears) by scrapping with steel wire brushes or any other means & prepration of surfaces , including filling depressions of scrapped surfaces with 1.5 mm thick wall putty and preparation of surfaces for further treatment etc. complete all as specified and directed.
2140
-
-
Material & Labour for applying two coats of Acrylic Emulsion Distemper over on preapared surface of wall complete all as specified and directed. Note: Prepration of surfaces shall be measured and paid under serial item no. 46.00 here-in-before.
2140
-
-
Material & Labour for applying two coats of Acrylic emulsion distemper including preparing newly plastered surfaces of wall including 1.5mm thick wall putty etc complete all as specified and directed.
1600
-
-
Material & Labour complete removal of exsiting surface of ceiling and applying two coats of white wash etc complete all as specified and directed.
6500
-
-
Material & Labour preparation of newly plastered or unplastered surfaces and apply three coats of white wash on wall complete all as specified and directed..
200
-
-
Material & Labour preparation of newly plastered or unplastered surfaces and apply three coats of white wash on ceiling complete all as specified and directed..
500
-
-
Material & Labour preparation of old plastered or unplastered of walls and applying two coats of Cement Base Paint of approved tint complete all as specified and directed.
4206
-
-
Material & Labour for preparation of newly plastered or unplastered surfaces of walls and apply two coats of cement base paint of approved tint complete all as specified and directed.
1000
-
-
Supply and Fixing Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. not exceeding 10 kg each brackets, conforming to Fe.290.Gde-E-165 for cooler stand etc complete all as specified and as directed.
2000
-
-
Supply and Fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
70
-
-
Carefully chipping, removing existing loose / damaged concrete with plaster from Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items by low impact high frequency hammer / chipper without damaging the existing sound concrete and exposing old reinforcement upto 10mm beyond corroded reinforcement bars using electrically operated diamond concrete saw blade, making the edges straight and even and cleaning it by wire brush and then by air blower complete all as specified and directed.
240
-
-
Material and Labour for Cleaning of existing reinforcement bars in Roof, ceiling, Chajja, Fascia, Fins, Drops and similar items with wire brush / rotary wire brush to make entire circumference surface of bars free from rust scales, loose material, dirt etc., complete and with and including applying alkline rust converting primer on the existing rebar and allowing it to react with rust for 06 Hrs and from a corrosion resistant , insoluble and adherent protective layer including cleaning the reinforcement, wire brushing to remove the rust spalls, complete as per manufacturer's instructions, complete all as specified and directed.
Note:- Mode of measurement per sqm of breaking area of concrete only.
240
-
-
Material and Labour for Providing and application of zinc rich epoxy anti-corrosive protective coating on reinforcement bars as corrosion protection system in 2 coats to the entire circumference surface of bars ( consumption Qty as per manufacturer's instructions but min 0.4 kg / Sqm approx) in roof, ceiling, chajja, Fascia, Fins, Drops, columns, Beams and similar items complete all as specified and directed by Engineer-in-Charge. The product should confirm carbonation resistance of 2mm and bond strength 1N/Sqmm according to ASTM C-882-78 complete all as specified and directed.
240
-
-
Material and Labour for Apply SBR based bonding agent to the opened grooves in the concrete before filling up with Polymer modified mortar or any other treatment ( consumption Qty as per manufacturer's instructions but min 0.4 kg / Sqm approx) including cleaning the surface to remove dirt, dust or any other impurities on the surface in roof, ceiling, chajja, Fascia, Fins, Drops, columns, Beams and similar items complete all as specified and directed by Eng-in-Charge.
240
-
-
Material and Labour for Rebuilding the section of structural damaged RCC / PCC elements of Roof, ceiling, chajja, Fascia, Fins, Drops repair to spalling concrete to its original size and shape in layers of 10 mm average thickness in 1st layer by providing and applying with pre-batched, one component fiber based repair mortar having compressive strength = 50 N/Sqmm (28 days) according to ASTM C 109, flexural strength = 5N / Sqmm (7 days) according to ASTM C-293-79 complete all as specified and directed.
240
-
-
Material and Labour for Rebuilding the section of damaged RCC elements to its original size in thickness upto 100 mm by supply and casting with ready to use non shrink, Cementations free flow micro-concrete having compressive strength 60 N /S mm (28 days) according to ASTM C 1107-99 including mixing, placing and leveling the surface by grinding off cementations slurry or cementations joints differences if any and cruing complete all as specified and directed.
Note:- Mode of measurement per Kg of micro concrete only.
2500
-
-
Supply and Grouting injecting two part, low viscosity, moisture insensitive injection- liquid, based on high strength epoxy resin by pressure and using pressure epoxy injector with accessories till nozzle refused to accept the grout including mixing of grout having following properties:-(i) mixed density 1.1 kg / 1 (at + 27ºC) : Viscosity -250 m Pass at + 30ºC and should comply according to ASTM C 881 Type II and IV , Grade-I , class E+F (ii) Compressive strength = 70 N/Sqmm (7 days) according to ASTM C 579 : Tensile strength -50N / Sqmm (after 7 days at +30ºC cure) according to ASTM D 638 : Tensile modul- 2000N / Sqmm after 7 days at +30ºC cure) according to ASTM D 638, (iii) Bond strength -10.8N /Sq mm (failure in concrete ) after 14 days at + 30ºC cure) : Flexural strength - 50 N / Sqmm according to ISO 178. (iv) Seal the nozzle with thyrotrophic epoxy adhesive after the refusal of grout material from nozzle. Note :- Leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost complete all as specified. Note:- Mode of measurement : Per kg of material consumed.
234
-
-
Material and Labour for Drilling holes of 12mm dia upto 100 mm deep holes in structural members at the interval of 300mm in staggered manner or along the crack line in reinforced concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm dia NRV (Non Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix it inside the hole by applying thixotropic epoxy adhesive to ensure complete sealing and allow curing the system for minimum of 8 Hrs before Grouting including nozzle projections, excess putty, if any, over concrete element by grinding , leveling and finishing the external surface after completion of the work complete all as specified and directed.
1800
-
-
Material and Labour Forming jambs, etc. to openings , including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in Cement Mortar 1:4 , complete all as specified and directed.
100
-
-
Material & Labour for Udaipur Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade laid over with and including 15 mm thick cement screed in cement mortar 1:4 , and roundening to the edge of stone slabs , complete all as specified and directed.
41
-
-
Taking down old Wooden cupboard and Supply & Fixing new 1.00mm thick Mild steel black sheet in built locker of size 760.00 mm x 600.00mm x 1100.00 mm as per Drawing No. FD-1029 Sheet 1 & 2 and provision of Locking System , handle including one coat of primer and two coats of synthetic enamel paint complete all as specified and directed.
150
-
-
Supply & Fixing PVC SWR Pipe (ISI Marked) 110mm bore ,Pressure Rating 6 kg/Sqcm , Single Socketed, in any length with rubber ring joints, fixed to walls with MS Clamps complete all as specified and directed.
240
-
-
Supply & Fixing PVC SWR Bend 110mm bore (ISI Marked) , of any radius / shoe fixed to PVC pipe complete all as specified.
24
-
-
Supply only intergral water proofing compound complete all as specified and directed.
47
-
-
Wire brushing and cleaning the top surface of roof slab etc. including washing the roof surface with water and making the surface free from mud and previous treatment, making surface good to receive further treatment etc. complete all as specified and directed.
1270
-
-
Material & Labour for PCC 1:2:4, Type-BO, using 12.5 mm graded stone aggregates as in PCC Padding to maintain slope at roof complete all as specified and directed.
63
-
-
Material & Labour for water proofing treatment over finished and dried surfaces of RCC slab by applying oil bound bituminous primer @ 0.30 kg / sqm and providing and laying APP modified water proofing membrane 3.00 mm thick weight not less than 3.50 Kg / sqm , reinforced with non woven polyester reinforcement matt weighing not less than 160gm / Sqm polyester core, having softeten point not less than 150 degree centigrade , longitudinal tensile strength not less than 650N/5cm, tearing strength of 180N, laid with torch application , side overlap 75mm and end overlap 100mm and tucked into the chases including ponding test complete all as specified and directed.
1270
-
-
Material & Labour for 40 mm thick Brick tiles laid / bedded with and including on 15 mm thick cement mortar 1:6 and joints grouted flush in Cement Mortar 1:3 mixed with 5% of crude oil by weight of cement complete all as specified and directed.
575
-
-
All as per serial item No. 73.00 here-in-before but except brick tiles.old serviceable brick tiles shall be obtained from serial item no. 2.00 here-in-before of BoQ and reused after proper cleaning & washing complete all as specified and directed by Engineer-in-Charge . Note : The rate of cleaning and washing of retrived tiles is included in this item and nothing shall be paid extra on this account.
575
-
-
Material & Labour cement concrete 1:2:4, Type B-1 using 20mm graded stone aggregates as roof kerbs or mud stops, rounded or chamfered on edges.complete all as specified and directed by Engineer-in-Charge
4
-
-
Material and Labour for Water proofing treatment to sunken slab and adjoining vertical surface as specified under :-
(a) Material and Labour for rendering 10mm thick in cement mortar 1:3 using coarse sand as approved by GE mixed with integral water proofing compound as per manufacturer instructions trowel even and smooth with steel trowel on sunken surfaces.
(b) Material and Labour for Applying fist coat of chemical pidifin 2K on cleared RCC surface @0.86 kg/Sqm (Minimum) as Recommended by Manufacturer.
(c) Material and Labour for Provide a layer of glass fiber mesh of size 2.25mm x 2.25mm (45 GSM) over first coat of chemical pidifin 2K as per manufacturer recommendation.
(d) Material and Labour for Applying second coat of chemical pidifin 2KB (Dr Fixit) @ 0.86 Kg/Sqm (minimum) over layer of glass fiber mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers.
70
-
-
Material and labour for cement concrete (1:5:10), type E-2 using 40 mm graded stone aggregate as in filling of sunken floors complete all as specified and as directed by Engineer-in-charge.
16
-
-
Supply & Fixing 0.56 mm thick plain aluminium sheeting alloy 31000 H4, in ridges, hips valley gutters drip and straight flashings (Length and grith as fixed) complete all specified and directed .
65
-
-
Supply & Fixing 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip
and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all specified and directed .
25
-
-
Supply and fixing in repairs PVC connection 15 mm size with brass nuts on both ends and washers length 450mm complete all as specified and as directed by Engineer-in-charge.
138
-
-
Supply and fixing in repairs stop valve for 15 mm bore of pipe, angular type, quarter turn, cast copper alloy, chromium plated , screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.
138
-
-
Supply and fixing in repairs stop valve ( Concealed type) for 15 mm bore dia of pipe, Fancy Type, long body, angular type, quarter turn, cast copper alloy, chromium plated , screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.
36
-
-
Supply and fixing in repair brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-charge.
24
-
-
Supply and fixing in repairs , tubular towel rail brass chromium plated 20 mm dia ‘D’ type 60 cm long including end brackets complete all as specified and as directed by Engineer-in-charge.
24
-
-
Supply and Fixing in repairs, chromium plated stainless steel soap tray of size 100 mm x 100mm x 60mm dia and fixed on wall with chromium plated brass screws complete all as specified and as directed by Engineer-in- charge.
24
-
-
Supply and fixing in repairs Bib Tap Brass Chromium plated Fency type , Quarter turn , screwed down, screwed for iron pipe or for brass ferrule for 15mm bore of pipe complete all as specified and as directed by Engineer-in-charge.
84
-
-
Supply and fixing grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and as directed by Engineer-in-charge.
27
-
-
Supply and Fixing 5mm thick bevelled edge mirror of selected quality glass fixed on SS struds and cup washers complete all as specified and as directed by Engineer-in- charge.
13
-
-
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour
PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per
specification & drawing complete all as specified and as directed by Engineer-in-Charge.
290
-
-
Supply and fixing Factory Made Solid PVC Moulded Door Shutter, 28mm to 30mm thick (stiles), with 2, 4, or 6 raised panel design with particle board core with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed by Engineer-in-Charge.
80
-
-
Supply and fixing extruded aluminium anodised type B-21, 100mm long butt hinges with galvanised mild steel screws complete all as specified and as directed by Engineer-in-charge.
234
-
-
Supply and fixing aluminium anodised handles, 125 mm long, cast type, (ISI marked) complete all as specified and as directed by Engineer-in-charge.
156
-
-
Supply and fixing aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and as directed by Engineer-in-charge.
156
-
-
Supply and Fixing GI tubing medium grade ISI marked with all new fittings and fixed to walls & ceiling or laid in floors, bore of pipe 15 mm complete all as specified and as directed by Engineer-in- charge.
170
-
-
Supply and Fixing GI tubing medium grade ISI marked with all new fittings and fixed to walls & ceiling or laid in floors, bore of pipe 20 mm complete all as specified and as directed by Engineer-in- charge.
100
-
-
Supply and Fixing in repairs vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm , white, with integral foot rests including connection to flush pipe, anti-syphonage pipe etc including making golld to floor complete all as specified and as directed by Engineer-in- charge.
30
-
-
Supply and Fixing in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia x 900mm long flush pipe of polyethylene of low or high density of PVC complete all as specified and as directed by Engineer-in- charge.
42
-
-
Supply and fixing in repairs Vitreous china counter top oval shaped wash hand basin, white of size 560mm x 470mm, including cast iron cantilever bracket, 32 mm dia brass waste coupling and including fixing of waste fitting and union complete all as specified and as directed by Engineer-in-charge.
24
-
-
Material and Labour for Providing Precast cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate in cooking platform / slab including necessary form work and setting in cemrnt mortar 1:4 complete all as specified and as directed by Engineer-in- charge
0.8
-
-
Supply & fixing Hand shower (health faucet) ABS body mild steel chromium plated including 1.25 meter long 8mm dia flexible tube and including wall hook for 25mm bore pipe complete all as specified and as directed by Engineer-in-charge.
12
-
-
Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform/cooking plateform or as directed, including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge.
12
-
-
Supply and fixing vitreous china urinal, half stall type, white excluding flushing cistern but including flush pipe, and waste pipeand also including connections to flushing pipe and outpipes, bedding urinal against wall in cement mortar (1:2), securing urinal to plug with and including 60 mm long brass screws, pointing arount urinal back in cement complete all as specified and as directed by Engineer-in-charge.
12
-
-
Material and labour Cutting into existing manholes for connecting new drains, making good
to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4
section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required of internal dia of pipe 150mm bore complete all as specified and as directed by Engineer-in-charge.
10
-
-
Supply and fixing Cast iron spun soil waste and vent pipe 100mm bore with or without ears fixed with cement joints fixed to walls complete all as specified and as directed by Engineer-in-charge.
160
-
-
Supply and fixing Cast iron spun soil waste and vent pipe 75mm bore with or without ears fixed with cement joints fixed to walls complete all as specified and as directed by Engineer-in-charge.
100
-
-
Supply and fixing 100mm bore Cast iron bends (any radius),diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and as directed by Engineer-in-charge.
40
-
-
Supply and fixing 75mm bore Cast iron bends (any radius),diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and as directed by Engineer-in-charge.
24
-
-
Supply and fixing cast iron floor trap, 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP gratting of suitable size complete all as specified and as directed by Engineer-in-charge.
36
-
-
Supply and fixing 100mm bore Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and as directed by Engineer-in-charge.
21
-
-
Supply and fixing 75mm bore Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and as directed by Engineer-in-charge.
20
-
-
Supply & fixing 100mm bore cast iron cowl complete all as specified and as directed by Engineer-in- charge.
7
-
-
Supply and fixing Cast iron P trap long , 100mm dia including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate with and including CP gratting of suitable size complete all as specified and as directed by Engineer-in-charge.
42
-
-
Material and Labour for Extra over cast iron pipes 75mm /100mm bore pipes bend joints etc. is provided epoxy joints in lieu of cement joints complete all as specified and as directed by Engineer-in-charge.
18
-
-
Material and labour for Providing and fixing SFRC (Steel Fibre Reinforced Concrete) Cover and frame (heavy duty HD-20 grade designation) size of frame 800mm x 800mm conforming to IS-12592, Total weight of cover and frame not less than 182kg fixed in cement conrete 1:2:4 Type-B1, using 20mm graded stone aggregates complete all as specified and as directed by Engineer-in-charge.
6
-
-
Material and Labour for 75 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, surface finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in- charge.
110
-
-
Material and Labour for 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring, complete all as specified and as directed by Engineer-in- charge.
100
-
-
Material and Labour for 30 mm thick PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate as in flooring, complete all as specified and as directed by Engineer-in- charge.
100
-
-
Material and Labour for Hard core using broken stone aggregate of gauge not exc. 63mm, deposited spread and leveled in layers not exc. 150 mm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in- charge.
10
-
-
Supply & fixing rotational moulded polyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection and fixing ball valve and gate valve complete all as specified and as directed by Engineer-in-charge. (Note :- Float valve and gate valve shall be measured & paid separately as Supply only under appropriate item of BOQ.)
12
-
-
Supply only ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 25mm bore iron pipe (minimum weight 455 gram complete all specified and as directed by Engineer-in-charge.
12
-
-
Supply only gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.
24
-
-
Material and labour for PCC ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in-charge.
11
-
-
Material and Labour Brick work with sub class ‘B’ Fly ash bricks , straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in- charge.
240
-
-
Material and labour Brickwork with sub class 'B' old size Fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.
300
-
-
Material and labour for RCC M-25 (Design mix) using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by Engineer-in-charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
50
-
-
Material and labour for RCC M-25 (Design mix) using 20 mm graded stone aggregates as in columns, pillars, piers, posts and struts complete all as specified and as directed by Engineer-in-charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
30
-
-
Material and labour for RCC M-25 (Design mix) using 20 mm graded stone aggregates as in beams, cantilevers, bressummers, lintels over 1.5 m span and the like etc complete all as specified and as directed by Engineer-in-charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
36
-
-
Material and labour for RCC M-25 (Design mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like and in chajja etc complete all as specified and as directed.
(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
42
-
-
Material and labour for RCC M-25 (Design mix) using 20 mm graded stone aggregates as in chajjas complete all as specified and as directed by Engineer-in-charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.
1
-
-
Material and Labour for formwork for rough finish flat surface of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed by Engineer-in-charge.
110
-
-
Material and Labour for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 5cm but n exc 10cm wide on rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-charge.
140
-
-
Material and labour for formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work not exc 200 mm thick (horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge.
300
-
-
Material and Labour for formwork square,reactangular or polygonal on rough finish surface to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed by Engineer-in-charge.
200
-
-
Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. on rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge.
400
-
-
Material and labour for formwork to chullah hoods, chajjas, troughs and similar items including edges on rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge.
10
-
-
Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etc complete all as specified and as directed by Engineer-in-charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
15000
-
-
All as per item No 136.00 here in before but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders etc. complete all as specified and as directed by Engineer-in-charge.
5000
-
-
Material and labour Treating the bottom and sides of excavation and Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed by Engineer-in-charge.
100
-
-
Material and labour Material and labour Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed by Engineer-in-charge.
80
-
-
Excavation in trenches not exc 1.5 meter wide and not exc 1.5 meter depth for foundation etc or for shafts , wells, cesspits, manholes , septic tank, for laying of cables etc not exceeding 10 Sqm on plan and not exc 1.5 meter depth and getting out in soft/loose soil etc complete all as specified and as directed .
174
-
-
Excavation in trenches not exc 1.5 meter wide and exceeding 1.5 meter and not exceeding 3.0mtr depth for foundation etc or for shafts , wells, cesspits, manholes , septic tank, for laying of cables etc not exceeding 10 Sqm on plan and exceeding 1.5 meter and not exceeding 3.00mtr depth and getting out in soft/loose soil etc complete all as specified and as directed .
12
-
-
Returning filling in, including spreading , leveling, watering and well ramming in layers each not exceeding 25cm thick in soil complete all as specified and as directed by Engineer-in- charge.
70
-
-
Removal of surplus excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and as directed by Engineer-in- charge.
84
-
-
Spreading and levelling in layers n exc. 25cm thick well ramming including watering
as required complete all as specified and as directed by Engineer-in- charge.
20
-
-
Taking down carefully copper /aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem , sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc. complete all as specified and directed by Engineer-in-charge.The weight of aluminium scrap and copper scrap for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.
659
-
-
Material and Labour for Modular type fitting with one light/ fan point point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with 2.5 Sqmm nominal cross sectional area single core PVC insulated, unsheathed 'multi stranded' FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) 20mm bore conforming to 3537 Part-I ISI marked including PVC conduit accessories such as elbow, tee,etc. surface on wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box concealied with front & modular cover plate with frame suitable matching colour of required module for mounting or housing switches, socket outlets, fan regulators, etc. including blanking plates & all other fixing accessories for one way switch or one fan point controlled by one 5/6 Amps switch & regulator and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge
NOTE:- The quoted unit rate is deemed to be inclusive of cost of metal flush boxes, modular white cover plates, modular frame plates and flush fixed with cement mortar 1:4 etc.However modular switches,sockets and fan regulators shall be measured and paid seperately under respective items of Schedule'A' BoQ.
373
-
-
All as item No 146.00 here in before but for one socket outlet 3 pin 5/6 Amps 250 volts on same board complete all as specified and as directed by Engineer-in- charge.
67
-
-
All as item No 146.00 here in before but for one socket outlet 3 pin 5/6 Amps 250 volts flush type on Independent board complete all as specified and as directed by Engineer-in- charge.
160
-
-
All as item No 146.00 here in before but for one socket outlet 6 pin, 6/16 Amps 2 in 1 on the independent board complete all as specified and as directed by Engineer-in- charge
55
-
-
Material and Labour for Modular type fitting point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with 1.5 Sqmm nominal cross sectional area single core PVC insulated, unsheathed 'multi stranded' FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) 20mm bore conforming to 3537 Part-I ISI marked including PVC conduit accesories such as elbow, tee,etc. surface on wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box concealied with front & modular cover plate with frame suitable matching colour of required module for mounting or housing switches, socket outlets, fan regulators, etc. including blanking plates & all other fixing accessories for two way switch point controlled by two two way 6 Amps switch including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge
NOTE:- The quoted unit rate is deemed to be inclusive of cost of metal flush boxes, modular white cover plates, modular frame plates and flush fixed with cement mortar 1:4 etc.However modular two way switches shall be measured and paid seperately under respective items of Schedule'A' BoQ.
4
-
-
Supply and fixing Modular Switch 1 way 6A,1 Module complete all as specified and directed by Engineer-in-charge.
600
-
-
Supply and fixing Modular Switch 2 way 6A,1 Module complete all as specified and directed by Engineer-in-charge.
8
-
-
Supply and fixing Modular Switch one way 16 Amp 240 Volt, AC ,1 Module complete all as specified and directed by Engineer-in-charge.
55
-
-
Supply and fixing Modular Socket Outlet , Multipurpose,3 Pin, 6 Amp , 2 Module complete all as specified and directed by Engineer-in-charge.
227
-
-
Supply and fixing Modular Socket outlet , multipurpose, 2/3 Pin, 6/ 16 Amp 2 Module complete all as specified and directed by Engineer-in-charge.
55
-
-
Supply and fixing Fan regulator 0-5 steps , 120W - 2 module complete all as specified and as directed by Engineer-in- charge.
64
-
-
Supply and fixing Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and as directed by Engineer-in- charge.
343
-
-
Supply and Fixing Lamp holder PVC/polycarbonate type with back plate suitable for batten fitting with LED bulb 9W complete all as specified and as directed by Engineer-in- charge.
30
-
-
Material and Labour in repair for Sub main wiring concealed PVC conduit with two single core of size 10 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade drawn in and including non metallic rigid PVC conduit medium quality of size 25 mm dia conforming to 3537 Part-I ISI marked including PVC conduit accessories such as elbow, tee,etc. including one single core of size 10 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as directed. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 10 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 25 mm dia shall be measured as one length.
760
-
-
Supply and Fixing Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,, double door, powder coated DB SPN 12 way 240 Volt, 200 Amps rated bus bar, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.
24
-
-
Supply and Fixing Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,, IP-43 protection, flush mounted for metal door, powder coated DB V TPN 4 way, 415 V AC with 200 Amps rated bus bar, Double door, dust and vermin proof suitable for incorporation of Incoming MCCB and outgoing MCB SP/TP and earth & neutral bus bar etc complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.
2
-
-
Supply and Fixing MCB SP 6 to 32 Amps 240, 10 KA 'C' curve complete all as specified and as directed by Engineer-in- charge.
168
-
-
Supply and Fixing MCB SPN 40 to 63 Amps 240, 10 KA 'C' curve complete all as specified and as directed by Engineer-in- charge.
24
-
-
Supply & Fixing LED light fitting decorative box type 1x 20 Watt, 220V AC with driver, holder with and including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to light fitting complete all as specified and as directed by Engineer-in- charge.
238
-
-
Supply & Fixing LED light fitting decorative mirror type 2 ft long, 10 watt 220V, AC , with high out put diffuser with drive holder and with and including tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to light fitting complete all as specified and as directed by Engineer-in- charge.
17
-
-
Supply & Fixing Energy efficient LED street light fitting 25 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant including thermal managment in multiple optics complete with IP 65/66 protection ,with and including GI bracket made out of 40mm bore light grade tube 1.2 mtr mtr length bent to shape , fixing with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection complete all as specified and directed
12
-
-
Material and Labour for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia light grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note :- (a) PCC chamber shall be constructed at least 1.5 m away from earth pit. Pipe for watering shall be provided in slanting manner.
(b) 4mm dia GI wire and 15mm dia light grade GI protection pipe upto 7.5 metre shall deemed to be included in quoted rate.
4
-
-
Supply and Fixing Exhaust fan, steel body AC single Phase. 230V of size 450mm sweep heavy duty with, blades, and frame and louvers complete all as specified and directed by Engr-in- Charge.
12
-
-
Taking down carefully existing unservicable ceiling fan any sweep from site and rewinding the ceiling fans with super enamelled copper wire of existing gauage including replacement of nuts,bolts, split pin, rubber reel, capacitor 2.5mfd , with and including painting the fans and refixing the celing fan to respective place as and when directed by Engineer-in-charge
64
-
-
Taking out old under ground LT XLPE/PVC cable of any size from trenches /wall/roof/road/pipe/pole/DB including brick layer / pre-cast concrete cable cover and segregation/ staking of serviceable bricks/ pre-cast concrete cable cover of any size and type from trenches for reuse and broken brick bats / pre-cast concrete cable cover of any size and type removing from site complete all as specified and directed by Engineer-in-Charge.
Note:- Excavation , earth work shall be measured and paid for separately under appropriate item
150
-
-
Supply and laying XLPE LT cable of cross sectional area 70 Sqmm 3.5 core, 1100 Volt grade, heavy duty with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel strip or wire and over all PVC sheathed stranded conductor conforming to IS-7098 (Part-II) with latest amendments laid in trenches/fixed to wall/pole/laid in floor including necessary connections and suitable size of thimbling complete all as specified and as directed.
Note:- Earth work, Brick/ cable cover protection and sand cushioning shall be measured and paid separately under appropriate items of Schedule'A' BOQ.
150
-
-
Material and Labour sand cushioning, with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified. (Note:- Punned thickness shall be considered for payment purpose)
10
-
-
Supply and laying un-reinforced precast concrete cable cover, class LV type-I, flat size 250 mm x 150 mm x 40 mm for cable protection, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete all as specified.
833
-
-
Material & Labour for making the hole under road and hard standing for laying with and including Galvanised steel light grade pipe of size 80 mm dia including all fittings as required at site by mechanical drill system or Auger system and making the surface good as per existing surface completed all as specified and directed by Engineer-in -charge. Note : The rate of Galvanised steel light grade pipe of size 80 mm dia and fittings is included in this item and nothing shall be paid extra on this account.
15
-
-
Supply and Fixing in replacement GI tubing medium grade ISI marked with all new fittings and fixed to walls & ceiling or laid in floors, bore of pipe 32 mm complete all as specified and as directed by Engineer-in- charge.
40
-
-
Supply and Fixing in replacement GI tubing medium grade ISI marked with all new fittings and laid in trenches , bore of pipe 32 mm complete all as specified and as directed by Engineer-in- charge. Note: Excavation and earth work shall be measured and paid seperately under appropriate items of Schedule 'A' BoQ.
40
-
-
Supply and Fixing 150mm x 150mm size salt glazed stone ware gully trap, square or round mounthed type 'P' including connecting to waste pipe complete all as specified and as directed by Engineer-in- charge.
10
-
-
Supply and Fixing DWCP (SN8) drain pipe 150mm nominal dia as per IS-16098 (Part-II) laid in trenches on hard ground or PCC including all accessories/ fittings/ jointing and testing complete all as specified and as directed by Engineer-in- charge. Note:- Excavation , earth work, bedding and pedestal / anchorage if required shall be measured and paid separately under appropriate item of BOQ/ Sch 'A'
60
-
-
Supply and Fixing repairs, 100mm bore cast iron 'TEE Junction' (single or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and as directed by Engineer-in- charge.
28
-
-
Supply and Fixing repairs, 75mm bore cast iron 'TEE Junction' (single or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and as directed by Engineer-in- charge.
20
-
-
Supply and Fixing vitreous china wash down water closet pan (Pedestal Patten) with and including water closet sheet white back, closed pattern with flat bottom and mild steel chormium plated or aluminium hinges device including flush pipe , including Jet Spray and fixing bolts etc. complete all as specified and as directed by Engineer-in- charge.
12
-
-
Supply and Fixing in repairs,15mm bore CP basin mixer single lever type and fixed complete all as specified and as directed by Engineer-in- charge.
24
-
-
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%