Military Engineer Services Tender

M & L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algai properties applied in two coats @ 1.79 litre (undiluted) / 10 Sqm, diluted with water as per manufacturer's instruction, applied over preprimed surfaces with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI allowed the surface to dry for 6-8 hours in between subsequent coats of paint complete all as specified and directed.

Notes for srl item No. 1 to 4 The work for periodical services shall include the following elements and the rates quoted by the bidders shall be deemed to include for the same:- (a) The work pertaining to periodical services shall be executed by the contractor through authorised applicator of manufacturer of the materials like Exterior Emulsion paint & putty etc after prior approval of the GE in writing. A MOU to this effect shall be submitted with bid. (b) The Contractor shall upload the "Memoradum of Understanding" (MOU) entered into, with at least one of the approved manufacturers/ manufacturers mentioned in the contract , under cover-I of the e bid , failing which the bid shall be liable to be rejected and no claim whatsoever shall be entertained on this account. (c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures and safety norms as required. (d) Removing of Nails, making good holes, cracks etc (e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing protective covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery, electric fittings , wirings etc. Drops and splashes of paint/putty to be cleaned to the entire satisfaction of Engineer-in-Charge. (h) Sample patch of 10Sqm area shall be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

M&L for rendering cement plastering 12 mm thick in cemet mortar 1:4 including mixing liquid WPC of approved manufacturer as per manufacturers instruction @ 0.200 ltr in 50 Kg of cement on brick work or concrete surfaces or in chajjas/parapet walls etc, surfaces finished even and smooth without using extra cement incl taking down of existing plaster of any description complete all as specified and directed Note : Liquid WPC shall be measured and paid separately.

M&L for rendering cement plaster 10mm thick in CM 1:3 on fascia / edging / ceiling of Chajjas, roof projections etc, mixed with WPC liquid as per manufacturer's instruction @ 0.200 litre per 50 kg of cement including taking out peeled off plaster / concrete if required and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed. Note : Liquid WPC shall be measured and paid for separately.

M & L for dismantling & removing loose concrete, replacing corroded reinforcement with new one and filling plain cement concrete 1:1½ :3 type A0 using 12.5mm graded stone aggregate at places like chajja, sun shades, roof projection, fascia, etc including necessary form work, complete all as specified & directed Note :- Reinforcement shall be measured and paid seperately.

M&L for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply only liquid water proofing compound of appproved make complete all as specified & directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high. The colour of paint and dimension of letter to be used shall be approved from the Engineer-in-charge prior to execute the work complete all as specified and directed.

M&L for writing Stops, commas, short lines, dashes, hyphens, brackets etc shall be approved. The colour of paint and dimension of characters to be used complete all as specified and directed.

M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&l for preparation of old painted wooden surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Note for Item No 1 to 13 (The cost for providing steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of single/double/triple storey building as directed shall be included in the quoted rate against the respective item and nothing extra shall be admisible on this account.)