Municipal Administration And Water Supply Department Tender

Supply and Delivery Of Light Commercial Vehicle of Following Specifications: 1.Displacement (CC) / Engine Capacity-700 CC- 1250 CC 2. Max Power 20-30BHP2500 Rpm And Above 3.Max Torque- 50ONM @ 2000 Rpm And Above 4.Type Of Fuel-Diesel. 5. Load Capacity -2 Cu.Rn 6. Vehicle Emission Norms- BS-VI 7.No Of Cylinder In Engine 2-4 Cylinder 8.Length Of Chassis- 3800 Mm 3950 Mm 9.Width Of Chassis-1500 Mm - 1550 Mm. Ground Clearance. 150 Mm -165mm. 10.Fuel Tank Capacity-Diesel-30 Ltrs To 40 Ltrscng-12-25kg. 11.Size Of Tyre's & No's-145 R 12 - 5 Nos. 12.Wheel Base- 1900 Mm- 2250 Mm. 13.Gross Vehicle Weight- 1550 Kg-1900 Kg. 14.Clutch- Single Plate Dry Friction Diaphragm. 15.Transmission System-Manual. 16.No Of Speed/ Forward Gears- 4 Nos Speeds(4F+1R). 17.Type Of Steering -Manual / Power. 18.Spead Governors -Shall Be Fitted. 19.Pay Load-800Kg To 1000Kg. 20.Tipper Body Length -2100 Mm-2200mm, Mild Steel. 21.Tipper Body Width- 1400 Mm -1500mm, Mild Steel. 22.Tipper Body Height- 750mm-950 Mm, Mild Steel. 23.Side Portion (LH & RH)& Rear Doors Sheet Thickness - 2 Mm, Mild Steel. 24.Tipper Body Top Sheet Including frame Sheet Thickness -1.6mm, Mild Steel. 25.Tipper Body Top Lid Sheet Thickness 1.2mm, Mild Steel. 26.Tipper Container Should Be Fabricated With Two Doors On The Rear Side And Four Doors On Four Top Corners Of The Containers With Hinges And Locking System. A Partition Should Be Provided On The Middle Cf Container Along The Vertical Length Of The Body. 27.Tipper Body Top Lid Main Sheet Thickness- 75 X 40 X6 Mm. 28.Hydraulic Cylinder Make Reputed Make. 29.Hydraulic System Driven-Main Engine. 30.Pump Make-As Per IS Standard. 31.Painting-Should Be Painted With One Coat Of Anti-Corrosive Epoxy Primer And Two Coats Of Enamel Paint For Approved Quality To Ensure Long Lasting Resistance For Weatherizing And Breakage. The Color Shade Should Be As Per Norms. 32Lettering -To Be Carried Out As Directed By Dept Officer. 33 Tipper Body Rear Door-Shall Be With Necessary Locking Facility. 34.Side Safety Guard- Shall Be Provided As Per RTO Requirernent. 35.Additional Conditions-Vehicle With Fuel Sensor And GPS Tracking. 36.Warranty Distance/Year -25000KM//12 Months Which Ever Is Earlier. (One Year O&M By Suppliers)