Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Technical
Technical
Class Of Bidder
... View More
The class eligibility requirements to bid or participate in this tender are Super Class, Special Class, and 'A' Class contractors.
Technical Capacity
... View More
The bidder is required to have prior work experience of completing at least one similar nature of work during the last 5 years. The similar nature of work includes construction of R.C.C M-20/M25/M30 or above grade RCC Framed Building including EI & GPH work. The completion certificate should contain information such as name of the work, agreement amount excluding GST, major items of work with quantity executed, date of commencement, stipulated date of completion, actual date of completion, and value of work done in Indian Rupees excluding GST. One of the sources mentions that the bidder should have prior work experience of completing one work of Rs.236.08 lakh (Excluding GST), which is 30% of the estimated cost. Additionally, the bidder should have an annual turnover of Civil construction works of at least Rs. 393.47 Lakh (Excluding GST), which is 50% of the estimated cost. No specific percentage of similar works completed is mentioned in most of the sources, except for the 80% marks requirement for tools and plants and machineries. However, one source mentions 30% of the estimated cost as the value of similar work completed.
Costs
EMD
₹ 7,87,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_EICCL_110185_2Bid Award Id
ViewTender No
CCEJC R AND B 11/2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and lying Plain Cement Concrete of proportion (1:4:8) in foundation and floors using 4cm (1 1/2") 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading,cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
195.54
6000
1173376.88
... More
Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position complete as per direction of Engineer-In -Charge.
-
-
-
... More
A. Foundation & Plinth
-
-
-
... More
a.Foundation
229.31
7260
1664825
... More
b. PLINTH BEAM
94.74
8126
769895.14
... More
B. Column shaft
-
-
-
... More
Level upto First Floor
91.51
18781
1718708.79
... More
Level upto Second Floor
55.54
21279
1181880.09
... More
Level upto Third Floor
52.54
24271
1275232.49
... More
C. Lintel
-
-
-
... More
Level upto First Floor
11.96
14873
177881.68
... More
Level upto Second Floor
12.08
16589
200401.16
... More
Level upto Third Floor
0.53
18643
9880.95
... More
D. Stair Case
-
-
-
... More
Level upto First Floor
5.03
16278
81882.62
... More
Level upto Second Floor
7.56
18276
138170.34
... More
E. Chajja
-
-
-
... More
Level upto First Floor
14.82
1278
18943.67
... More
Level upto Second Floor
8.24
1452
11965.3
... More
Level upto Third Floor
8.24
1660
13681.7
... More
F. Roof Beam
-
-
-
... More
Level upto First Floor
48.69
16403
798666.94
... More
Level upto Second Floor
75.68
18425
1394445.62
... More
Level upto Third Floor
142.19
20846
2964170.94
... More
G. Roof slab
-
-
-
... More
Level upto First Floor
185.45
12928
2397627.42
... More
Level upto Second Floor
123.99
14256
1767632.44
... More
Level upto Third Floor
212.63
15843
3368782.14
... More
Supplying, Cutting, Straightening coiled or bent up M.S. rods or Tor steel of SAIL(HYSD Fe-500) welding or jointing if necessary, bending, binding, tying the grills and laying in position as required for R.C.C. works and hoisting, lowering and placing in position in all floors according to approved designs and drawings including cost, conveyance, of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer-in-charge All reinforcement steel and structural steel shall be procured from primary producers of steel-SAIL/RINL/TATA/JINDAL(Panther)/SHYAM STEEL.
-
-
-
... More
Level upto First Floor
878.23
8811
7738787.11
... More
Level upto Second Floor
469.46
8844
4152162.44
... More
Level upto Third Floor
694.43
8879
6165843.97
... More
Brickwork with Fly ash bricks in cement mortar (1:6) in F&P (23cm x 11cm x 8 cm) having minimum crushing strength not less than 75 kg.per.sq.cm. including splays cutting, circular moulding, chamfering, corbelling and similar such type of woks with all necessary projections watering and curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost and conveyance of all materials, labour with T&P required for the work and royalties etc. complete in all respect as per direction of Engineer in charge.
82.06
5800
476013.65
... More
Level upto First Floor
351.3
5834
2049519.33
... More
Level upto Second Floor
382.33
6204
2372319.42
... More
Level upto Third Floor
289.93
6631
1922612.81
... More
12mm (1/2'') thick cement plaster in cement mortar (1:6) finished smooth to brick walls after raking out the joint including watering and curing for seven days with cost and conveyance of all materials and labour with T& P required for the work and royalities etc. complete in all respect as per direction of Engineer in charge.
-
-
-
... More
Level upto First Floor
2091.55
199
416323.03
... More
Level upto Second Floor
2357.32
206
487258.04
... More
Level upto Third Floor
1448.9
214
311151.28
... More
16mm (5/8'') thick cement plaster (1:6) finished smooth to inside of 9''/10'' thick brick walls after raking out the joint including watering, curing for seven days with cost and conveyance of all materials and labour with T&P required for the work and royalities etc. complete in all respect as per direction of Engineer in charge.
-
-
-
... More
Level upto First Floor
695.57
284
197680.99
... More
Level upto Second Floor
758.81
291
220851.65
... More
Level upto Third Floor
753.17
298
224519.98
... More
6mm thick cement plaster (1:4) finished smooth to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment including watering, curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with royalities etc. complete in all respect as per direction of Engineer in charge.
-
-
-
... More
Level upto First Floor
726.34
215
156344.69
... More
Level upto Second Floor
142.43
220
31420.06
... More
Level upto Third Floor
1575.21
226
356233.74
... More
Supplying, fitting and fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 15622-2006 (Group-B) of size 600mm x 600mm Color / Printed series of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tile including cost of all materials, taxes, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Level upto First Floor
982.97
1152
1132391.27
... More
Level upto Second Floor
788.78
1165
919118.01
... More
Providing and fixing vitrified tiles in dados, skirting and rises of steps /walls on/over 12mm th cement plaster (1:3) (1cement:3sand) joined with neat cement slurry mixed with pigment to match the shade of tiles, rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge
-
-
-
... More
Level upto First Floor
13.8
1269
17517.03
... More
Level upto Second Floor
15.75
1289
20305.69
... More
Supplying, fitting and fixing of ceramic tiles of premium grade having thickness 7mm to 8mm (30cm x 30cm / 40cm x 40cm special plain / printed series ) in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades including cost of all materials, taxes, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Level upto First Floor
80.68
918
74107.81
... More
Level upto Second Floor
68.51
931
63836.25
... More
Providing and fixing of Ceramic tiles in dados, skirting and rises of steps /walls on/over 12mm th cement plaster (1:3) (1cement:3sand) joined with neat cement slurry mixed with pigment to match the shade of tiles, rubbing,cleaning including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge
-
-
-
... More
Level upto First Floor
310.55
983
305519.09
... More
Level upto Second Floor
282.99
1003
284022.91
... More
Providing and fixing 10mm thick Granite stone floor Tiles above 0.1 Sqm and upto 0.4 Sqm size (sample of Granite stone should be approved by EIC) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & Grooving etc. laid over 20mm thick bed of cement mortar 1:1 (1 cement: 1 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights.
-
-
-
... More
Level upto First Floor
606.31
2342
1420008.34
... More
Level upto Second Floor
238.97
2693
643641.8
... More
Finishing wall surface of wall with wall putty (Water based) of approved make and finished smooth and even surface to receive paiting including cost of scaffulding stsging changes with cost of all materials labour etc complete in all respect as per direction of Engineer In Charge.
-
-
-
... More
Level upto First Floor
3513.46
83
294252.28
... More
Level upto Second Floor
3258.55
85
278931.88
... More
Level upto Third Floor
4685.69
87
410232.16
... More
Wall priming one coat with any approved wall cement primer ( Water Based) including cost of labour charges etc. complete as per Engineer In Charge.
-
-
-
... More
Level upto First Floor
3513.46
81
285819.97
... More
Level upto Second Floor
3258.55
84
275673.33
... More
Level upto Third Floor
4685.69
88
412575
... More
Painting 2(Two) coats with any approved Plastic Emulsion paint to wall surface after cleaning the surface including cost of P.E Paint Cost,Coneyance, of all materials and labour with T&P required for the work etc. comple te in all floors complete in all respects as per the direction of engineer incharge.
-
-
-
... More
Level upto First Floor
2817.88
107
303203.89
... More
Level upto Second Floor
2499.74
109
274721.43
... More
Level upto Third Floor
3932.53
112
441229.87
... More
Finishing wall surface with Weather Coat two coats with any approved shade including cost, conveyance, , cess and royalties of all materials with labour and T&P required for the work etc., complete in all respect as per direction of Engineer In Charge.
-
-
-
... More
Level upto First Floor
695.57
99
69313.55
... More
Level upto Second Floor
758.81
103
78498.89
... More
Level upto Third Floor
753.17
107
80965.78
... More
Supplying, fitting, fixing of, M.S Grill for (MS Door, MS GATE ,M.S grill ,, MS Square Bar Spike to openings,tubular trusses and collapsible gate ) of approved specification and of approved size, materials and design with a coat of primer including painting two coats over a coat of redoxide primer with cost and conveyance of all materials, labour, royality, etc. complete in all respect and as per direction of Engineer-in-charge.
-
-
-
... More
In All Floors
1443.87
88
127233.82
... More
Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately).
29.39
6205
182366.42
... More
Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size, made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance all complete as per direction of Engineer-in-charge
8.52
26954
229653.19
... More
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Casement Door – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards.
106.93
8963
958413.59
... More
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.) Three Track - Three Panel sliding window– 60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 2.5 mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards
69
5984
412896
... More
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) ( FENESTA / NCL VEKA LTD.) Ventilator/ Top Hung – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards.-
5.58
7115
39701.7
... More
Priming one coat of approved make (to receive enamel paint) to Iron/Wood work with cost, conveyance, taxes of all materials and labour with T&P required for the work etc.complete in all respect as per direction of Engineer in charge.
-
-
-
... More
Level upto First Floor
39.12
74
2910.53
... More
Level upto Second Floor
35.46
77
2755.24
... More
Painting two coats of Synthetic enamel paint of approved make to Iron/Wood work with cost, conveyance, taxes of all materials and labour with T&P required for the work etc.complete in all respect as per direction of Engineer in charge.
-
-
-
... More
Level upto First Floor
39.12
185
7272.41
... More
Level upto Second Floor
35.46
193
6868.6
... More
Supplying, fitting, fixing of Stainless steel of 304 Grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mmX32mmX2mm @ 0.90mt.c/c & stainless square pipe bracing of size 32mmX32mmX2mm in 3 rows in stair case as per approved design & specification, buffing, polishing etc with cost,conveyance,, labour,T&P etc. required for the work complete in all respect in all floors as per direction of Engineer-in-Charge.
-
-
-
... More
In All Floors
314.34
295
92856.04
... More
Dismantaling brick or stone masonary in lime or cement mortar under 3mt.height including stacking the useful materials for reuse and removing the debries within 50mt.lead.
119.4
1576
188275.89
... More
Dismantaling brick or stone masonary in lime or cement mortar above 3mt.height including stacking the useful materials for reuse and removing the debries within 50mt.lead.
67
1669
111863.2
... More
Dismantlling and removing R.C.C. columns beams slab, staircase landing, lintels including stacking the useful materials for re-use and removing the debries within 50mtr lead.
-
-
-
... More
Ground Floor
77.64
1662
129045.44
... More
First Floor
57.72
1745
100732.94
... More
Dismantling and removing 2.5cm thick artificial stone flooring including stacking the useful materials for re-use and removing the debries within 50 mts.lead
399.64
112
45119.36
... More
Dismantling and removing of A.C. & G.C.I. Sheet including stacking the useful materials for re-use and removing the debries within 50 mts.lead
116.21
101
11841.8
... More
Dismantaling and removing doors,windows and ventilators including removal of frame,hinges,fastening and stacking the same for re-use and removing the debris within 50mts lead.
41.5
446
18523.53
... More
Carraige of earth by mecahnical means with cost of all lead & lift upto 5Km. including cost of all labour,T&P etc complete.
321.76
278
89697.04
... More
EI Works
-
-
-
... More
INTERNAL WIRING.
-
-
-
... More
Supply ,Installation ,testing and commisioning of suspended Round 50 W LED COB Downlight Dali Dimmable with Recessed mounted Led Luminare pressure die cast Aluminium housing with corrision Resistance powder coated using Nano technology with black powder coated and high transmitive PMMA diffuser having 115 mm Dia, with power consumption Maximum upto 50W having system lumen output of Minimum 5000 Lumen. LED chip life of 50,000 burning hours at L70 - Minimum tested for 10K hours for complaince of TM21 projection. The LED used shall have CCT of 3000K, CRI 80. Luminaire driver should be Isolated and multistage constant current APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V ( nominal rated voltage – 240V) with minimum 6 KV surge protection, PF 0.95, THD 15%; IP 20;. Manufacturer need to submit Following Certificates - 1) LM79 Test report from In-House NABL accredited LAB; 2) LM80 Test certificate from the LED chip manufacturer; 3) Photobiological Safety test report as per IS 16108 : 2012/EN62471 from LED chip manufacturer;.MAKE:WIPRO(Model no.LD56LED GIMBAL DALIDIMMABLE SPOT LIGHT)/Eq. model of BAJAJ/ LT/PHILIPS/PANASONIC/CROMPTON/Havells
60
5042
302520
... More
Supply and fixing of laser engraved signage with double acrylic sheet with mounting string illuminated Exit Indication with Battery 2 hr battery Back-up. Make: Prolite/ BAJAJ/ LT/PHILIPS/PANASONIC/CROMPTON/Havells
10
5700
57000
... More
supply ,Installation and testing of 3W LED STEP light with pressure die cast Aluminium housing and high transmitive PMMAdiffuser having 600mm Cutout Dia, with power consumption Maximum upto 3 W having system Luminaire driver should be Isolated and multistage constant current APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V ( nominal rated voltage – 240V) with minimum 2 KV surge protection, PF 0.95, THD 10%; IP 20;. Manufacturer should have In-House NABL accredited LAB. Manufacturer need to submit Following Certificates - 1) LM79 Test report from In-House NABL accredited LAB; 2) LM80 Test certificate from the LED chip manufacturer; 3) Photobiological Safety test report as per IS 16108 : 2012/EN62471 from LED chip manufacturer;.MAKE: PANASONIC/ PHILIPS/ BAJAJ/ CROMPTON/ WIPRO/ HAVELLS/ LT
121
1465
177265
... More
supply ,Installation and testing of Wall Up/Down Light on Column 24 W LED with pressure die cast Aluminium housing and high transmitive PMMA diffuser having EXTERIOR WALL GLAZING, with power consumption Maximum upto 24 W having system lumen output of Minimum 3000 Lumen. LED chip life of 50,000 burning hours at L70 - Minimum tested for 10K hours for complaince of TM21 projection. The LED used shall have CCT of 5700K, . Luminaire driver should be Isolated and multistage constant current APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V ( nominal rated voltage – 240V) with minimum 2 KV surge protection, PF 0.95, THD 15%; IP 20;. . Manufacturer should have In-House NABL accredited LAB. Manufacturer need to submit Following Certificates - 1) LM79 Test report from In-House NABL accredited LAB; 2) LM80 Test certificate from the LED chip manufacturer; 3) Photobiological Safety test report as per IS 16108 : 2012/EN62471 from LED chip manufacturer;. MAKE: PANASONIC/ PHILIPS/ BAJAJ/ CROMPTON/ WIPRO/ HAVELLS/ LT
37
2153
79661
... More
Supplying and fixing of Energy efficient Recess /Surface mounted square/round shaped LED luminaire made up of CRCA powder coated sheet steel of not more than 25W (595mmx595mmx70mm)and system lumens output not less than 3250 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (2 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 5 years.
64
2682
171648
... More
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .
55
728
40040
... More
Supplying an fixing of recess/surface mounted 2'x2' 36 W(595mmx595mmx70mm) square shaped LED with lumen efficacy not less than 130lm/W, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty) as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 5 years.
45
4741
213345
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years
7
736
5152
... More
Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The
luminaire should be Replacement Warranty will be 2 years
25
1540
38500
... More
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm 1700 cmh air delivery with louvers of exhaust fan in the existing wall, including fixing & conntection complete etc.as required and as per the direction of E.I.C..(Make-USHA (Model.Turbo HDEF 1400 RPM ISI)/Eq. model of /Havells/ ALmonrad/ Crompton
16
2687
42992
... More
SITC of i-Sense wireless IoT System having BLE 5.2 AES 128 Bit encyption based 32 child DALI controller and analog 2 channel (0-10V) output, operates on 100-277 VAC, 10- 30mA, 50Hz, DALI 2.0 protocol. Sensor input of 0-3V DC & 1mA. For analog dimming, It provides output voltage of 0- 10V DC +/- 0.2V and 15mA per channel. For DALI output, it provides 12-20V DC and 160mA max for 32 DALI devices. An auxillary power output of 3.3VDC and 30mA. 0 - 100% dimming, device to device range 45m. Controller must control individually control standard DALI or Tunable DALI Drivers independantly or combination of both. Operating temperature -20 to 50 deg celsius, surge protection 3kV. System shall support easy commissioning and configuration via Mobile Application along with user and site management features. Optional Cloud Application must be available for control and monitoring of the devices along with analytics reports. Mobile Application shall have features of individual & group control for on/off/dimming/ colour tuneing / Scene Control / Animation etc. Device must have security key for commissioning and replacement for future. MAKE: PANASONIC/PHILIPS/BAJAJ/CROMPTON/WIPRO/HAVELLS/LT
2
22550
45100
... More
SITC of i-Sense BLE 5.2 AES 128 Bit encyption based wireless battery powered 5-button wall switch that controls ON/OFF, intensity and CCT of an individual or group of luminaires.Operates on 3V DC input voltage in an ambient temperature of 0 to 50 deg celsius and device to device range 45m. System shall support easy commissioning and configuration via Mobile Application along with user and site management features. Optional Cloud Application must be available for control and monitoring of the devices along with analytics reports. MAKE: PANASONIC/ PHILIPS/ BAJAJ/ CROMPTON/ WIPRO/HAVELLS/LT
1
5500
5500
... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers(Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
7
3681
25767
... More
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/ legrand( Myrius)/ Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/ legrand( Myrius)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
Group C
410
1275
522750
... More
Supply and fixing of modular metal box on surface or recess with suitable size of modular cover in front including providing an fixing of ISI marked 16Amp modular plug with switch with all conection. on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius)/Schnider(Zencelo)//PANASONIC(VISION)
55
683
37565
... More
Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable size of metal box and modular cover in front on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius)/Schnider(Zencelo)//PANASONIC(VISION)
73
937
68401
... More
Supplying and installation of 25A AC starter Modular type, Schneider/Siemens/Legrand coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
31
626
19406
... More
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
-
-
-
... More
4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 with configuration of incomming 8 modules & out going-12 modules,suitable for Flush mounting and Surface mounting with Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
10
4270
42700
... More
Supplying and fixing 40-63 Amps rating, C series,10KA breaking capacity,4P, 415 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
7
2966
20762
... More
Supplying and fixing 32 Amps rating, C series,10KA breaking capacity,4P, 415 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
3
1820
5460
... More
Supplying and fixing 63 Amps rating4P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The MCB should be Replacement Warranty will be 3 years.
10
5239
52390
... More
Supplying and fixing 6-32amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
30
1525
45750
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
60
321
19260
... More
Submains:Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
-
-
-
... More
2 x 1.5 sq.mm. + 1 x 1.5 sq.mm.
1645
157
258265
... More
2 x 2.5 sq.mm. + 1 x 1.5 sq.mm.
1234
171
211014
... More
2 x 4 sq.mm. + 1 x 1.5 sq.mm.
305
188
57340
... More
4 x 6.0 sq.mm. + 2 x 4 sq.mm.
250
317
79250
... More
4 x 10.0 sq.mm. + 2 x 6 sq.mm.
360
444
159840
... More
S/I/T&Commissioning of CPRI Tested LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING POWER/AC)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list. Type 2 SPD 3P+N 40kA shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed. In commer - 01 no 160A 4P MCCB 25kA, withTMR based release with adjustable overload ,Icu=100%Ics with ROM & S. Link. ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS) (Icu=100%Ics)with shunt trip. Busbar- 04 numbers of 250Amps, Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going- 06 nos 63A 4P MCB 10kA,C series for power BDB. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9. Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. (ii) 01 set of MFM with CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA
or equievalant make & model).
1
103132
103132
... More
S/I/T&Commissioning of CPRI tested LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING POWER/AC)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list. Type 1+2 SPD 65kA 2 nos shall be installed in the incomer. 80X10MM Separate Aluminium Earth bus bar should be installed. In commer - 01 no630 A 4P LSIG MCCB 36kA microprocessor based , with ROM & S. Link. ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS) (Icu=100%Ics)with shunt trip. Busbar- 04 numbers of 800 Amps, Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going- 01 nos 400 4P MCCB 25 ka LSIG MCCB with micro processor based release (Icu=100%Ics) ,200 A 4P change over for dg section , 63-100A 4p 16ka mccb withTMR based release with adjustable overload ,Icu=100%Ics 10 nos, 1 no 200A 4p 25 ka mccb withTMR based release with adjustable overload ,Icu=100%Ics for fire panel, 04 nos 63A 4P MCB 10kA,C series Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. (ii) 01 set of MFM with CTS.(DIGITAL)(Secure/L&T,CT-KAPPA
or equievalant make & model).
1
374900
374900
... More
Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in- Charge.
2
18059
36118
... More
Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.
4
6500
26000
... More
Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.- in-Charge. Tapping from 50mm x 6 mm bus bar to all sub panel
260
150
39000
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.- in-Charge.
28
1117
31276
... More
Supplying, laying & testing of following size of PVC insulated XLPE shethed / strip armoured aluminium / Copper conductor power cables of 1100 volt grade laid directly unground with sand cushioning, brick protection, clamped on surface of the walss / columns / existing RCC / inside masonry cable trenches / on the cable tray /throuth G.I Pipes / hume pipes / PVC pipes as the case may be, including cost of shaddles/ clamps/ markers etc but excluding the cost of G.I. Pipes / Hume pipes cpmplete with making good to the damages as required and as per direction of Engineer-in-charge. MAKE: FINOLEX/ KEI/ POLYCAB/HAVELLS/RR CABLE/GLOSTER
-
-
-
... More
3.5 core x 300 sq mm Aluminium armoured Cable.(FOR Main PANEL)
100
2821
282100
... More
3.5 core x 70 sq mm Aluminium armoured Cable.
70
764
53480
... More
3.5 core x 300 sq mm brass double compression gland and aluminium lugs
6
898
5388
... More
3.5 core x 70 sq mm brass double compression gland and aluminium lugs
4
464
1856
... More
Supply ,installation ,testing & commissioning of 20 KVA Parallel UPS SYSTEM WITH IGBT based inverter system, true online double conversion system, inbuilt isolation transformer & automatic phase sequence corrector of 3ph in put to 3 ph output,415V, with built in BMS with battery back up up to 30 minutes with MS Rack for battery Housing, DC cable 7 Mtr with SFU and links for installation (Battery required: 12V, 75AH, 20 No.s) protection for fault by OL,UV,EF,GF,OC,Ph. (Make:Numeric/APC/ Vertiv/) as per direction of Engg.-in-Charge. Warranty period of all accessories & component & system must be 2 years & complete test certificate must be submitted along with ups including component list &
SLD.
1
598000
598000
... More
Supply, Transportation, erection, testing and commissioning of 3 Phase, 415V, 50Hz, water cooled multi cylinder diesel generator set with alternator of 58.5 KVA ( Make -Kirloskar / Jakson/Mahindra ) out put contineous rating directly coupled Engine and Alternator with guard and mounted on a common base plate of Robust construction and complete with AMF panel having IP-52 protection, Acoustic Enclosure as per CPCB IV+ norms , sound absorbing material, to restrict sound level up to 75 dB up to 1 mtr distance and as per CPCB IV+ norms etc as per following specifications mentioned below. Warrentee period must be 2 years. ALTERNATOR:The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21. ENGINE: Diesel Engine start, developing suitable BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 58.5KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc.
01. Exhaust pipe of required size and length with insulation or
clading.
02. Diesel tank suitable for 8 to 10 Hours running capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the Manufacturer standards.
1
919200
919200
... More
AMF PANEL: Cubical, Compartmentalized, AMF Panel Baord should be outdoor type IP 55 with all Power & Control Contractors, Switches, Meters and other accessories, Internal Wiring, connection, inter-connection etc. for Trouble Free smooth function for 58.5KVA DG Set complete with Battery Charger & leads as required. BASE PLATE: Common Base Plate of required size for mounting of Engine Alternator Set fabricated from MS Channerl and vibration damping arrangement with cushy foor mounting including paintng etc. as required. FOUNDATION: Suitable size Cement Concrete (1:2:4) foundation duly plastered and finished with neat coat Cement as required along with smoke exhaust system piping including base frame of structure & lightening protection system. *It also includes 2 nos copper plate earthing for body and 4 nos copper plate earthing for
neutral, control cable of 15mtr 2.5sqmm 6core , civil foundation work. (The Manufacturing of DG set shall not in any case bemore than six months old from the date of award of work)
-
-
-
... More
Supply,Installation, Testing & Commissioning of of 10 Passenger (G+1) lift gearless with Machine room Capacity(680 Kg), with minimum shaft size of 1800mm(Left to right)x2400mm(Front to back) Elevator G+1 Floors with ACVVVF drive/Control with ARD =1.25 MPS, SS honeycomb interior ,2hr fire rated door with simplex operation without attendant car position indicators,battery operated alarm bell & emegency light,SS honeycomb finish door finished car interior, recess Granite flooring ,power operated centre opening automatic sliding SS honeycomb finish doors for car entrance & hoist way entrance etc .All SS material shall be of grade SS-304 and minimum thickness of 1.6mm. Machine beams,buffer support channels,facia plate including sills pit ladder metal screen in Elevator pit etc.as per specifiaction including cost of (i)Overload detection,(ii)Voice announcement,(iii) Intercom,(iv)Braille Buttons v. flat cat6 cable for cctv with all Civil & Electrical works required for installation of Elevator in the existing lift well and machine room,scaffolding ,floor cutting including Fireman's switch complete in all respec as per the instruction of Engg. in charge.The Elevator should be suitable for physically handicapped person.Make:OTIS/ Mitsubishi/ Schindler/Johnson
1
1543750
1543750
... More
Supplying, installing, testing and commissioning of adressable multi sense smoke detector with inbuilt isolator module,base, junction box and other accessories.Make-Morley IAS/Siemens/Bosch/Edward/Notifier
36
3500
126000
... More
Supply and fixing of Response Indicator. Morley IAS/Notifier/Siemens/Bosch/Edward
36
320
11520
... More
Supply, installation, testing and commissioning of Adressable beam(Infrared) detector incliding transmitter and receiver complete with base and isolator.Make- Morley IAS/Notifier/Siemens/Bosch/Edward
3
60902
182706
... More
Supply, Installation,Testing & Commisioning of 2 loop Microprocessor based Addresable fire alarm control panel , fully networkable with each loop capable of taking 99 devices, 8 line x 40 character alpha- numeric liquid crystal display .The panel shall be soft addressable type . The panel shall be able to give pin point location of all fire/fault conditions. Further, the panel must be able to automatically switch off respective control switches when ever any alarm is triggered. The panel shall have integral SMF lead acid batteries with sealed cells of 24 V capable of running for a minimum of 8 hours with integral battery charger complete as required and as per specification. The fire alarm panel shall be suitable for software integration with BMS & PA system.Make-Morley IAS/Siemens/Bosch/Edward/Notifier
1
186000
186000
... More
Supplying, installation, testing & commissioning of addressable control relay module for integration with ahu starter and fire damper.Makes: Morley IAS/Notifier/Siemens/Bosch/Edward
7
6047
42329
... More
Supplying, installation, testing & commissioning of Addressable Single Output Module,Single Output Module, provides dry contact (Loop powered) or active output (24VDC required, cable monitored) (Certified by LPCB)) indicates system status: GREEN / AMBER / RED ,UL Listed. Makes: Morley IAS/Notifier/Siemens/Bosch/Edward
1
6052
6052
... More
Supplying, installing, testing and commissioning of Addressable Manual Call Point with back box.Make-Morley IAS/Siemens/Bosch/Edward/Notifier
8
5161
41288
... More
Supplying, installing, testing and commissioning of Analogue Addressable Loop powered Sounder with strobe light.Make-Morley IAS/Siemens/Bosch/Edward/Notifier
8
6941
55528
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable with pvc ,600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required Make-Polycab/KEI/Havells/Finolex/RR Kabel/Gloster
200
165
33000
... More
Supplying and fixing of following sizes of heavy class FRLS PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20mm dia
100
89
8900
... More
25mm dia
200
107
21400
... More
Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. (Make: SUPREMEX / CEASEFIRE/MINIMAX)
2
7700
15400
... More
Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc complete.(Make: SUPREMEX / CEASEFIRE/MINIMAX)
12
3264
39168
... More
Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge.(Make: SUPREMEX / CEASEFIRE/MINIMAX)
2
3659
7318
... More
Lightning Protection :- Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn/Equivalent
422
149
62878
... More
Supply of Roof conductor holder for parapet- Polyamide Conductor holder:With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn/Equivalent
200
51
10200
... More
Supply of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn/Equivalent
24
199
4776
... More
Supply of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/Dehn/Equivalent
12
203
2436
... More
Supply of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet the requirements of IS/IEC 62305. Tested for Electrical , mechanical and chemical as per IEC 62561. Tested for 100kA lightning current. Make-OBO/Dehn/Equivalent
12
1164
13968
... More
Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 2 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. Tested as per IEC 62561. Make-OBO/Dehn/Equivalent
10
1653
16530
... More
Supply for Providing of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and clamp tested upto 100KA lightning current . Make-OBO/Dehn/Equivalent
10
2460
24600
... More
Supply for Providing of Stand for Fang Fix system 16 kg made up of frost resistant concrete. Make-OBO/Dehn/Equivalent
20
954
19080
... More
Supply of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer. Tested for 100kA lightning current. Make-OBO/Dehn/Equivalent
10
380
3800
... More
Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height For Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn/Equivalent
10
277
2770
... More
Supply of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn/Equivalent
100
270
27000
... More
Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn/Equivalent
14
252
3528
... More
Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot-dip galvanised steel, Bottom section from polyamide, black. Tested as per IEC 62561. Make-OBO/Dehn/Equivalent
14
261
3654
... More
Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn/Equivalent
2
879
1758
... More
Supply of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 17.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 Make-OBO/Dehn/Equivalent
10
4183
41830
... More
Supply of universal clamp made of SS to connect rod with flat conductor Make-OBO/Dehn/Equivalent
10
887
8870
... More
Supply of Earth conductivity enhancing mineral compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn/Equivalent
10
2838
28380
... More
Supply of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system Make-OBO/Dehn/Equivalent
10
2169
21690
... More
Installation of The above arrangements including all accessories as per Direction of Engg. In charge.
1
17865
17865
... More
Supply,Installation,testing and commissing of 11tr dx type outdoor units consists of fixed type scroll compressors,fan motor with heat exchanger,safety,valves,solenoid valves,receiver,capillary tube,check valve, electronic expansion valve, refrigerrant filter, stop valve Units shall be 3 Phase macine Ductable units with indoors (Make Daikin/Carrier/O General/Mitsubishi)
10
165000
1650000
... More
Supply and erection of Refrigerant Copper pipes to integrate outdoor/ indoor units.The rate shall inclusive of class O closed cell nitrile rubber insulation covering with factory laminated fire resistant fibre cloth fabric as a resistant to scratch & Mechanical Impact Referegrant piping for the 11 TR Machine considring Liquid and Gas line Both as single pipe size: 9/8 & 5/8
100
1590
159000
... More
Supply and erection of the following 32mm/40mm Heavy Duty PVC pipe with all joints reducer,necessary elbows and tees,supporting arrangements etc. The rate shall inclusive of 9mm thick nitrile rubber insulation (tubular form) covering with aluminium foil for UV protection and damage against mechnical impact 40mm Dia
120
460
55200
... More
The air distribution system comprises with all supports like anchor fasteners and tie-rods,cradles,angle iron supports,bolts and nuts, 4mm thick self-adhesive neoprene rubber gasket, stiffereners,zinc chromate painted angle iron flanges,chipping and plastering of openings made for duct supports etc. filling the gap with fibre g;lass wool and with fire sealant complete as per specification. The rates quoted shall include turning vanes,straighting vanes,splitters,inspection doors probe,provisions for BAS sensors, inlets with test openings enclosures complete with locking caps,chain,gaskets,insulating plugs and extension for insulated duct work etc. Supply, installation,testing and balancing of Air Distribution System consists of factory fabricated Rectangular/Spiral duct Galvanized iron sheet metal ducting (Zinc coating 120GSM) with TDF/TDC flanges 0.6mm thick GSS ducting (Gauge 24)
600
1155
693000
... More
0.8mm thick GSS ducting (Gauge 22)
300
1337
401100
... More
Supply,Installation,testing and commissing of 15mm antimicrobial acoustic insulation. and all accessories as per specification 15mm thick insulation.make: k flex/armacell/a flex
150
1250
187500
... More
Supply,Installation,testing and commissing of 25mm Nitrile rubber insulation with factory laminated GC Cloth insulation. and all accessories as per specification.make: k flex/armacell/a flex
750
1350
1012500
... More
Supply and fixing of Extruded Aluminium,powder Coated supply air Round jet/eyeball diffusers with collar damper as per drawing & specifications.Neck size: Dia 250 make: systemair/ventech
12
3632
43584
... More
Supply and Installation of Powder coated extruded aluminium square diffuser with volume control damper make: systemair/ventech
12
8500
102000
... More
Supply and Installation ,testing and commissing of outdoor and 3 Ahu controller with digital thermostat as per outdoor oem recomendation in complete as per the direction of engineer in charge .
1
65000
65000
... More
Supply and Installation ,testing and commissing of motorised fire damper with actuator mechanical fire damper complete with sleeve for fixing on retrun air opening.The damper shall be spring loaded and suitable for reset to original position.The damper also be provided with limit switch for transferring the signal to AHU starter panel/BMS for tripping the AHU in case of fire .The rate shall be inclusive of control wiring upto the Starter panel/DDC clopsing the opening surrounded by the sleeve with fire glass and fire sealant as per standards Fire Damper.
3
20515
61545
... More
Supply and Installation ,testing and commissing of 7500 cfm smoke exhaust fan with class H insulation 250 degree temprature with standing capacity with motorised mechanical fire damper complete with sleeve for fixing on retrun air opening.The damper shall be spring loaded and suitable for reset to original position.The damper also be provided with limit switch for transferring the signal to AHU starter panel/BMS for tripping the AHU in case of fire .The rate shall be inclusive of control wiring upto the Starter panel/DDC clopsing the opening surrounded by the sleeve with fire glass and fire sealant as per standards Fire Damper.Make-Systemair/Krugger/Greenheck
2
145000
290000
... More
SITC of Refrigerant R 410 A Gas
55
1350
74250
... More
S/F of400A copper busbar cubical EI outdoor hot dip galvanised subpanel board made of 2mm with powder coated with provision of following items 400A ,25kA MCCB as incomer LSIG MCCB with micro processor based release Icu=100%Ics , 40ka type 2 spd mfm,indicator,on off ,trip indication,14 nos 63A 16ka 4p MCCB withTMR based release with adjustable overload ,Icu=100%Ics as out going feeder with fabrication erection testing & comissioning of total enclosed panel board of size not less than 1500*1650*450mm with copper busbar , 415V 4strip & internal connection & provision for termination of incomming & out going cable , earthing,cable alley etc, complete.Make of MCCB-Legrand DPX3/Siemens 3VA/Schneider-CVS
1
156792
156792
... More
Supply and Installation ,testing and commissing of Double Skin Air Handling Units with mixing box , with vfd based and stardelta bypass Ahu starter panel thermal break profile of horizontal Configuration,50mm thick panel with 0.6mm thick,SS drain pan , weather proof canopy over AHU PUF insulation,pre and fine filter sections,6 RD multiple DX cooling coil suitable for R-410a refrigerant.single/multiple Expansion kit. communication kit,backward fan with plug fan ,spring vibration isolator for fan and motor factory assembled volume control damper,internal power and control wiring,required length of power cable from the starter pamnel.GI base frame complete as per specifications as required. backward Fan motor shall be IE-3 type and suitable for 415+10% VOLTS.50 cycles,3 phase AC supply capacity 45 tr or above as per ahu coil selection tr,Dehumidified Air. 15000 cfm,TSP 85 mmWC. coil selectionair coil leaving temp: 12 deg with 95 %RH return air : 25deg 55 RH make: VTS/Systemair/edgetech
2
725000
1450000
... More
Supply and Installation ,testing and commissing of Double Skin Air Handling Units with mixing box , with vfd based and stardelta bypass Ahu starter panel thermal break profile of horizontal Configuration,50mm thick panel with 0.6mm thick,SS drain pan , weather proof canopy over AHU PUF insulation,pre filter sections,6 RD multiple DX cooling coil suitable for R-410a refrigerant.single/multiple Expansion kit. communication kit,PLUG FAN ,spring vibration isolator for fan and motor factory assembled volume control damper,internal power and control wiring,required length of power cable from the starter pamnel.GI base frame complete as per specifications as required. backward Fan motor shall be IE-3 type and suitable for 415+10% VOLTS.50 cycles,3 phase AC supply capacity capacity 25 tr or above as per ahu coil selection,Dehumidified Air. 8500 cfm,TSP 50 mmWC. coil selectionair coil leaving temp: 12 deg with 95 %RH return air : 25deg 55 RH make: VTS/Systemair/edgetech
1
425000
425000
... More
Supply of 4C x 16mmsq Cable pvc Alluminium Armoured XLPE cables insulated ISI marked (Make-Havells/Polycab/KEI/Gloster/Finolex/RR Kabel)
120
305
36600
... More
Supply of 3.5C x 150mmsq Cable pvc Alluminium Armoured XLPE cables insulated ISI marked (Make-Havells/Polycab/KEI/Gloster/Finolex/RR Kabel)
63
1402
88326
... More
Supply of 4C x 10mmsq Cable pvc Copper Armoured XLPE cables insulated ISI marked (Make-Havells/Polycab/KEI/Gloster/Finolex/RR Kabel)
160
958
153280
... More
Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm on surface as required.
110
83
9130
... More
Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required.
317
130
41210
... More
Supply of materials, Fixing of Hot dip galvanised unperforated cable tray with cover and all accessories(Tee,bend etc.) along with hanging arrangements and supports fabrication complete. For following sizes.MAKE:OBO/Profab/Neidax
-
-
-
... More
300x60 mm with 1.6 mm thickness
100
753
75300
... More
400x60 mm with 1.6 mm thickness
148
850
125800
... More
PH Works
-
-
-
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
20mm dia PVC pipe (Sch-80)
-
-
-
... More
Ground Floor
20
175
3516
... More
First Floor
20
184
3682
... More
25mm dia PVC pipe(Sch-80)
-
-
-
... More
Ground Floor
90
245
22068
... More
First Floor
60
253
15210
... More
32mm dia PVC pipe (Sch-80)
-
-
-
... More
Ground Floor
60
322
19350
... More
First Floor
60
333
19986
... More
Second Floor
30
343
10311
... More
40 mm dia PVC pipe (Sch-80) top Floor
40
450
18036
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
50
861
43065
... More
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
15
1255
18825
... More
15mm dia CP Bib cock (Con-CHR-047KN Jaquar make)
9
1107
9966.6
... More
15mm dia CP Long body Bib cock (Con-CHR-107KN Jaquar make)
10
1451
14519
... More
15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
22
1156
25445.2
... More
25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 565
15
1648
24730.5
... More
WALL MIXER WITH PROVISION FOR OVERHEAD Shower (FLR-ABR-5273UPR)
2
7874
15749.2
... More
25mm dia brass full way valve (Shakti make)
12
1212
14546.4
... More
32mm dia brass full way valve (Shakti make)
10
1774
17746
... More
40mm dia brass full way valve (Shakti make)
7
2252
15769.6
... More
15mm CP Extension piece
90
77
6966
... More
125mm CP grating
55
87
4796
... More
15mm size C.P. flange
115
52
6049
... More
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge
-
-
-
... More
2000 liters capacity PVC water storage tank roof of 1st Floor
2
47726
95453.6
... More
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
12
63
762
... More
First Floor
10
64
647
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
-
-
-
... More
Ground Floor
6
214
1285.8
... More
First Floor
6
215
1291.8
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor
40
229
9196
... More
First Floor
40
236
9472
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
250
515
128775
... More
80mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
190
390
74252
... More
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
7
497
3481.1
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
15
293
4404
... More
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
15
407
6111
... More
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
19
232
4408
... More
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
10
58
582
... More
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
7
457
3199.7
... More
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
13
322
4195.1
... More
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
19
386
7334
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
25
160
4002.5
... More
75mm U-PVC plain bend(Ori Plast/Finolex/Supreme Make)
10
184
1840
... More
75mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
10
225
2251
... More
75x75x75mm U-PVC double equal door Tee(Ori Plast/Finolex/Supreme Make)
18
402
7241.4
... More
75mm U-PVC vent cowl(Ori Plast/Finolex/Supreme Make)
12
41
493.2
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
580mm size Orissa pan (Hindware/Parryware/Neycer make)
9
3817
34359.3
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
... More
European water closet with 'S' trap plain(Hindware/Parryware/Neycer make)
15
3288
49326
... More
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
... More
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
21
2368
49728
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
... More
550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal
8
6176
49413.6
... More
Counter top basin oval shape 550mmx430mm (Hindware/Parryware/Neycer make)
12
4635
55630.8
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
20mmx450mm long CP towel rail
21
901
18937.8
... More
Towel ring
18
648
11680.2
... More
Grab bar (Jaquar make) WAC - WHT - BAI 090
1
6299
6299.7
... More
450MM long Grab bar (Jquar make)AHS - CHR - 1507
8
1353
10827.2
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
CP soap holder
21
280
5882.1
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
-
-
-
... More
600mmx125mm plate glass shelf with CP/NP guard rails.
15
695
10434
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
... More
600mmx450mm size B.E mirror (swivelled type)
18
804
14486.4
... More
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
-
-
-
... More
CP revolving Shower (bend Type)
2
626
1252.4
... More
Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge stall urinal
6
5987
35922.6
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
45
239
10773
... More
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
12
149
1788
... More
Supplying all materials labour & laying the waterproofing material of Dr. fixit torch shield P3160(3mm) with its primer 2 coats or equivalent water proofing materials after drying cleaning the concrete surface over the concrete floor/roof/balcony/ sunken and dado upto1'6" in wall including cleaning, applying and mending as per specification including cost, conveyance, taxes, royalities of all materials to worksite etc. all complete as per the direction of the Engineer- in- charge.
-
-
-
... More
First Floor
45
837
37696.5
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
... More
First Floor =
5.4
8394
45328.68
... More
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )
-
-
-
... More
Granite Tiles 20mm thick =
12.24
2603
31871.74
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter's along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
-
-
-
... More
Aqua guard pure Chill 80 PSS UV
1
112242
112242
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
-
-
-
... More
110mm dia u-pvc pipe alround concrete
30
1377
41319
... More
160mm dia u-pvc pipe alround concrete
30
2217
66534
... More
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
8
1831
14648
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
... More
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
10
11087
110872
... More
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
1
25242
25242.7
... More
2 no 30 Users Septic Tank
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
34.56
293
10127.46
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
18.43
314
5797.53
... More
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.
3.45
934
3223.68
... More
Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete.
3.45
6325
21822.29
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
2.3
7966
18323.18
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
1.74
8743
15213.52
... More
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
1.74
8750
15225.87
... More
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
-
-
-
... More
RCC floor, roof slab chhaja up to 4.430 m height
12.12
755
9150.6
... More
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with 23cmx111cmx8cm size Fly Ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:6 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
19.18
5837
111963.25
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
52.8
227
11990.88
... More
Supplying all materials,labour,T&P and providing 16mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
34.82
286
9975.93
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
52.8
41
2185.92
... More
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
17.66
162
2875.05
... More
14,000 ltr capacity R.C.C. Under ground sump of in side size (2.80m x 2.80m x 2.0m)
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
16.93
293
4961.17
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
5.64
314
1774.17
... More
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
3.08
162
501.42
... More
Supplying all materials labour T&P filling sand in foundation and plinth with well watered and rammed etc. all complate. As per direction of ELC.
1.69
934
1579.14
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1.69
6325
10689.76
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
5.11
8743
44678.77
... More
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
4.52
8750
39552.26
... More
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
-
-
-
... More
RCC floor, roof slab chhaja up to 4.430 m height
55.94
755
42234.7
... More
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry tratment including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
37.58
217
8166.13
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
30.24
41
1251.94
... More
Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
... More
Drilling of 200mm dia bore
-
-
-
... More
00 mtr to 25mtr
25
755
18887
... More
26 mtr to 37mtr
12
836
10035.36
... More
Drilling of 150mm dia bore
-
-
-
... More
38 mtr to above
110
554
60993.9
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
... More
Lowering of 200mm dia P.V.C casing pipes
-
-
-
... More
00 mtr to 35 mtrs
35
138
4837
... More
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
-
-
-
... More
200mm dia PVC (sch-80) pipe
35
1633
57183
... More
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
1
1009
1009
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
... More
By DTH Rig
1
4994
4994.8
... More
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
-
-
-
... More
Rocky terrain with boulder formation for 300m depth
2
1122
2244.22
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
-
-
-
... More
1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
1
16737
16737.2
... More
DOL Control panel
1
3805
3805.5
... More
40mm dia steel short piece
1
152
152.3
... More
Well cap
1
152
152.3
... More
50mm size CI bracket
1
91
91.3
... More
2.50sqmm flat cable
50
128
6405
... More
20mm dia rigid UPVC pipes
25
6
172.5
... More
Steel rope with cover
45
26
1201.5
... More
Labour charges for lowering including transportation
1
2000
2000
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
32mm HDPE pipes (Finolex/Supreme make)
50
99
4990
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements