Water Corporation Of Odisha Tender

Supplying all labour, material & T&P and Lowering of submersible pumps with 80mm dia GI flanged riser pipe 3.0 mtr long each / 100mm dia MS Pipe including making flanged joint etc. all complete

Supply, Installation, Testing & Commissioning of Chemical Earthing including supply of all materials T&P and Labour Etc. All completed as per electrical specification and as per direction of EIC.

Supplying all labour, materials and tools and plants for installation, testing and commissioning of Split case pump set of required duty i.e discharge- 110LPS against the head of 45 mtr all complete as per direction of Engineer in charge with out control panel

Supplying all materials,labour T&P for Construction of RCC pump foundation base including fiXing of base plate for installation of centrifugal pump as per approved specification and direction of Engineer in charge. (1.6x1.2x1.2) (As per analysis attached approved in pandav nagar)

Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.

200mm dia M.S.Pipe (6.30mm thick)

200mm dia M.S. Flange.(12mm thick)

200mm dia x 45' M.S. Bend (0.75 mtr long)

250mm dia M.S.Pipe (6.30mm thick)

250mm dia M.S. Flange.(12mm thick)

250mm dia x 45' M.S. Bend (0.75 mtr long)

Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete

Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set of pocket etc all complete

Supplying all materials Labour & T & P for Fixing Ductile Iron Sluice Valve / NR Valve with double flanged ends for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Sluice valve .

200mm dia D/F Sluice Valve (PN1.6) Vag make

250mm dia D/F Sluice Valve (PN1.6) Vag make

200mm dia D/F Non Return Valve (PN1.6) Vag make

250mm dia D/F Non Return Valve (PN1.6) Vag make

Supplying all labour T&P materials for fitting & Fxing of pressure meter (YICA Make) Non comtact dipharma type with snubber, pipeing & needle valve at ESR as well as diferent lane & sub-laneto know the water pressure including the cost of pressre meter with drilling holes in pipe line & making good to the damages at including cost all labours T&P etc all complete as per the direction of Engieer-in-charges. 0 to 6kg/sqm pressure meter.

Design, Supply, Installation, Testing & Commissioning and Erection of External Electrification works at VSS Nagar Pump House consisting of (but not limited to) 200 meter (approx.) of 11 kV Over-head line, 11kV/ 0.433 kV, 250kVA Oil type distribution transformer (Star-rated) plinth mounted substation including D.P. structure, AB switch,tariff-metering, kitkat fuse, lightning arresters, 415V distribution box, required nos. of earthing, power and control cables and end terminations etc. to complete the system in totality as per detailed specifications, including all labour and materials, & other relevant civil work, etc. testing & commissioning with contractor's own test equipment, including stock, storage, erection and transportation, as per approved drawings, Scope of Work, List of Supply & Installation (for reference only), specifications of this tender, State Electricity Board's requirements/ rules, CPWD specifications, IS, Rural Electrification Rules, BIS etc.all complete as per specification given at Section 7B, 8 & 9 of DTCN and direction of Engineer-in-charge. Payment will made as per the price breakup schedule given at Section-11 of DTCN. [Note: The above mentioned description of works are tentative and preliminary in nature, and it shall be the responsibility of the bidder to obtain the actual list of works/ specifications from Power Distribution company prior to bidding and execution of job.]

Supplying all materials, labour and T&P for Earth work excavation in foundation and trenches in all kind of soil within 50m, initial lead and 1.5m, initial lift dressing levelling ,compacting the excavated bed,breaking clods to maximum 5cm to 7cm,sorting of excavted material into serviceable & unserviceable, laying servicable and unservicable material in layers not exceeding 0.3m in depth etc. all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour and T&P for Cutting in disintegrated rock not requiring blasting to be removed by pick axes ,crow bars and depositing materials within 50m initial lead and 1.5m initial lift including dressing levelling of the excavated bed, sorting of excavated material into serviceable and unserviceable, stacking the useful materials separately as ordered etc. all complete as per specification and direction of the Engineer-in-charge.

Supplying all labour, material, tools & plants for Providing and laying PLAIN CEMENT CONCRETE of (1:3:6) with course aggregate (crusher broken hard Granite metal), size as specified, for all works from 3.5m above ground level to 1.5m below ground level in any shape, position, thickness, finishing the top surface rough or smooth, tamping, ramming, vibrating, curing etc. all complete, including cost of all materials, taxes,labour, lead,transportation of concrete,T & P , but excluding cost of shuttering work, all complete as per specification and direction by Engineer In-Charge.

Supplying all labour, material, tools & plants for Providing and laying BRICK MASONRY WITH FLY ASH BRICKS of 25cmX12cmX8cm size having crushing strength 75kg/sqcm conforming to IS: 12894 with dimensional tolerance +2% in one or more brick thickness and in any shape (excluding circular/curved brick masonry) at foundation and plinth (from ground level upto 1.5m below ground level) including cost of materials, labour, scaffolding/ staging, sampling & testing, soaking of bricks, cutting and laying of bricks, curing, etc. all complete as per specifications and direction of engineer-in-charge. Brick work to be done using following content of cement mortar: Cement mortar 1:6 (1 cement : 6 Coarse sand)

Supplying all labour, material, tools & plants for Providing and laying BRICK MASONRY WITH FLY ASH BRICKS of 25cmX12cmX8cm size having crushing strength 75kg/sqcm conforming to IS: 12894 with dimensional tolerance +2% in one or more brick thickness and in any shape (excluding circular/curved brick masonry) from 1.5m below ground level upto 4.5m below ground level, including the cost of materials, labour, scaffolding/ staging, sampling & testing, soaking of bricks, cutting and laying of bricks, curing, etc. all complete as per specifications and direction of engineer-in-charge. Brick work to be done using following content of cement mortar: Cement mortar 1:6 (1 cement : 6 Coarse sand)

Supplying of all materials, labour T&P for RCC (1:11/2:3) with 12mm size hard granite crusher broken chips for RCC work excluding centering ,shuttering with all cost, conveyance, royalty & taxes etc. all complete as per P.W.D. specification and direction of Engineer-in-charge.

Supplying all labour, material, tools & plants for Providing and fixing CENTERING AND SHUTTERING including strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete as specified and directed. by engineering in charge. FOR THE FOLLOWING WORKS: R.C.C. Foundation, Plinth Band, Footings, Bases of Columns, Mass Concrete & Precast Slabs etc. upto 1.5 below ground level

Foundation & Plinth Band -

Lintel-

Roof slab & Chajja -

Beam & Column

Supplying all labour, material, tools & plants for Supplying & placing Steel reinforcement, concrete cover block for R.C.C. work using uncoated FE - 500 (D) HYSD Steel Bars conforming to IS:1786 including straightening, cutting, bending, placing in position and binding (including cost of binding wire 18 to 20 Gauge) of reinforcement bar etc. at ground level all complete as per specification and direction by engineer-in-charge .

Supplying all labour, materials, tools & plants for providing 12mm thick cement plaster, all complete as per specifications and direction of engineer-in-charge, using following cement mortar: Cement mortar 1:6 (1 cement : 6 fine sand).

Supplying all labour, materials, tools & plants for providing 16 mm thick cement plaster, all complete as per specifications and direction of engineer-in-charge, using following cement mortar: Cement mortar 1:6 (1 cement : 6 fine sand).

Supplying all labour, materials, tools & plants for providing 12mm thick cement plaster, all complete as per specifications and direction of engineer-in-charge, using following cement mortar: Cement mortar 1:4 (1 cement : 4 fine sand).

Supplying all labour, materials, tools & plants for providing 16 mm thick cement plaster, all complete as per specifications and direction of engineer-in-charge, using following cement mortar: Cement mortar 1:4 (1 cement : 4 fine sand).

Supplying all materials, labour and T&P for providing M.S. door & windows made out with M.S. angles of size 40mmX 40mmX6mm for outer chowkath frame and M.S. angle of size 30mmX30mmX6mm for inter frame and 2 mm thick M.S.sheet welded with necessary grills for windows including fitting and fiXing of cleats, tower bolts , aldrops with cost of all materials etc. complete in all respect as per specification and direction of Engineer in charge.

Supplying all materials, labour and T&P for filling approved SAND of specified quality under floors, in foundations, plinths, etc. for all depths and heights including cost of sand,royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers of loose thickness not exceeding 150mm, watering,ramming, compacting with mechanical compactors and/or other equipment to the specified levels to achive 85% relative density as per IS:2720 Part XIV,including preparation of subgrade to the required slope,providing testing apparatus and testing the degree of compaction all complete as per drawings, specifications and direction of Engineer-incharge.

Supplying all labour, material, tools & plants for Providing 2.5cm AS flooring with CC (1:2:4) with punning using 12 mm crusher broken granites chips. including pointing the joints with white cement and matching pigment etc., all complete as per direction of Engineer-in- Charge.

Supplying all labour, materials and T&P for providing Water proofing cement paint two coat on old work , all complete as per specification and direction of Engineer-in- Charge.

Supplying all labour, materials and T&P for Wall painting 2 coats with Weather Coat over a coat of primer of approved shade on new work to give an even shade in Ground Floor, all complete as per specification and direction of Engineer-in- Charge.

Supplying all labour materials and T&P for providing 2.50cm thick grading concrete over roof slab with C.C (1:2:2) using 06mm size CBG chips all complete.

Supplying all labour, materials and T&P for providing priming one coats with any approved primer, all complete as per specification and direction of Engineer-in- Charge.

Supplying all labour, materials and T&P for providing painting two coats with approved paint to iron works, all complete as per specification and direction of Engineer-in- Charge.

Supply installation of cable tray for OFC cable under HDPE (with Supply) along the cable tray for fixing to wall with suitable clamps etc all complete as per direction of EIC

Supplying fitting fixing of Pressure switch of make E+H, immersion along with S.S tubing (1mtr length) with necessary bracket , needle valve socket etc complete.

Dismantaling of existing Pump set including suction pipe, delivery pipe line, Pump Base etc all complete