The Odisha Small Industries Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
The Odisha Small Industries Corporation Limited - OSIC Tender
Eprocure
Opening Date13 May 2021
Closing Date7 Jun 2021
Tender Amount₹ 23,38,00,000
Costs
EMD
Refer DocumentsDocument Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_OSIC_68411_2Bid Award Id
ViewTender No
OSIC/Constn./2021-2022/01Tender Authority
The Odisha Small Industries Corporation Limited ViewPurchaser Address
-Website
http://http://www.osicltd.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Excavation of foundation in laterite rock or any hard rock (other than granite or disintigrated rocks) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department.
3119.34
-
1338
Warden Room
73.58
-
1338
Removing surplus earth from work site by mechanical means withien 5KM lead including loading, and unloading including cost of all labour,T&P etc. complete.
1625.7
-
151.2
Warden Room
177.53
-
151.2
Filling foundation and plinth with sand well watered and rammmed including cost, convayance and royality etc. complete
4348.06
-
332.7
Warden Room
147.01
-
332.7
Cement concrete (1:3:6) in foundation and plinth using 40mm size b.h.g.c.b metal including mixing and laying in proper place compacting watering including cost convayance and royalityb and taxes etc. complete
343.41
-
4156.6
Warden Room
23.65
-
4156.6
Providing and laying Plain Cement Concrete of proportion (1:2:4) in foundation and floors (i.e. below the base course of the flooring) using cement , 12 mm size crusher broken H.G chipsl and screened & washed sharp river sand for mortar of approved quality & from approved quarry including hoisting, lowering and laying concrete to the required level, ramming, watering & curing etc complete to required levels, laid in layers not exceeeding 15cm thick in each layer including cost, conveyance , loading,unloading,royalties and taxes of all materials, cost of all labour, Sundries, T&P required for the work including shoring, shuttering and dewatering ( if required) including hire and running charges of water pump required for the work etc complete in all respect as directed by the Engineer-in-charge.
3.13
-
5372.9
R.C.C M 25 grade of concrete using 20mm and 10mm down graded concrete using crushed stone aggregates mixed by vibrtator and all leads and alllifts including frame works etc. complete
-
-
-
a) Column Base footing
679.18
-
4665.7
Warden Room
26.06
-
4665.7
b) Column up toPL
286.35
-
10279.4
Warden Room
13.08
-
10279.4
Plinth beam
75.06
-
5016.4
Warden Room
9.12
-
5016.4
Column Superstructure
-
-
-
Ground floor
88.64
-
10279.4
1st floor
88.64
-
11514.2
2nd floor
88.64
-
12991.5
3rd floor
88.64
-
14759.8
4th floor
88.64
-
16876.7
5th floor
88.64
-
19575
6th floor
88.64
-
22633
7th floor
88.64
-
26293.2
8th floor
39.33
-
30674.4
d) Lintel
-
-
-
Ground floor
6.8
-
8135.6
Warden Room
3.15
-
8135.6
1st floor
12.09
-
8941.7
2nd floor
12.03
-
9904.8
3rd floor
12.03
-
11055.8
4th floor
12.03
-
12431.6
5th floor
12.03
-
14241.2
6th floor
12.03
-
16232.4
7th floor
12.03
-
18612.4
8th floor
0.5
-
21457.5
e) Chajja 65mm thick
-
-
-
Ground floor
70.74
-
757.4
1st floor
79.09
-
855.5
2nd floor
79.09
-
973
3rd floor
79.09
-
1113.6
4th floor
79.09
-
1282
5th floor
79.09
-
1494.4
6th floor
79.09
-
1737.6
7th floor
79.09
-
2028.8
8th floor
7.92
-
2377.6
f) Roof Beam
-
-
-
Ground floor
74.12
-
10279.4
Warden Room
10.18
-
10279.4
1st floor
69.85
-
11514.2
2nd floor
69.76
-
12991.5
3rd floor
69.76
-
14759.8
4th floor
69.76
-
16876.7
5th floor
69.76
-
19575
6th floor
69.76
-
22633
7th floor
69.76
-
26293.2
8th floor
12.97
-
30674.4
g) Roof Slab
-
-
-
Ground floor
171.88
-
8732.6
Warden Room
12.77
-
8732.6
1st floor
163.49
-
9658
2nd floor
163.01
-
10764.4
3rd floor
163.01
-
12087.3
4th floor
163.01
-
13669.4
5th floor
163.01
-
15726.6
6th floor
163.01
-
18014.9
7th floor
163.01
-
20751.4
8th floor
37.74
-
24024.3
h)Stair case
-
-
-
Ground floor
13.24
-
9802.7
1st floor
12.76
-
10942.1
2nd floor
12.76
-
12305.3
3rd floor
12.76
-
13936.5
4th floor
12.76
-
15888.4
5th floor
12.76
-
18389.4
6th floor
12.76
-
21210.2
7th floor
12.76
-
24585.8
8th floor
1.48
-
28625.6
i) Shelves
-
-
-
Ground floor
2.7
-
633.2
1st floor
153.54
-
729.1
2nd floor
153.54
-
843.9
3rd floor
153.54
-
981.6
4th floor
153.54
-
1146.6
5th floor
153.54
-
1350.5
6th floor
153.54
-
1588.5
7th floor
153.54
-
1873.7
j) RCC Wall
-
-
-
Ground floor
47.53
-
8829.6
Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge including cost of all labour and all labour and materials etc complete.
-
-
-
Ground floor
1729.11
-
8049.9
Warden Room
80.15
-
8049.9
1st floor
520.9
-
8073.1
2nd floor
520.17
-
8097.4
3rd floor
520.17
-
8123
4th floor
520.17
-
8149.8
5th floor
520.17
-
8178
6th floor
520.17
-
8207.6
7th floor
520.17
-
8238.6
8th floor
144.81
-
8271.2
Providing First Class Fly Ash Brick Masonry using F.A. bricks of size 25 c.m x 12 c.m x 8 c.m having crushing strength not less than 75 kg per square c.m. in cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar after immersing the F.A bricks for 6 (Six) hours in water before use in the works in Foundation & Plinth and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance, loading, unloading, royalties and taxes of all materials,cost of all labour,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
In Foundation and Plinth
308.86
-
3983.9
Warden Room
27.86
-
3983.9
Providing Fly Ash Brick Masonry using F.A. bricks of size 25 c.m. x 12 c.m. x 8 c.m. having crushing strength not less than 75 kg per square c.m. in cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in the works in superstructure and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
Ground floor
230.41
-
4017.2
Warden Room
63.5
-
4017.2
1st floor
221.12
-
4276.8
2nd floor
212.04
-
4575.3
3rd floor
212.04
-
4918.6
4th floor
212.04
-
5313.4
5th floor
212.04
-
5767.4
6th floor
212.04
-
6289.5
7th floor
212.04
-
6889.9
8th floor
155.09
-
7580.3
Providing Fly Ash brick masonry using F.A. bricks of size 25 c.m. x 12 c.m. x 8 c.m.having crushing strength not less than 75 kg per square c.m in cement mortar of mix (1:4) (for half brick masonry wall) with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in superstructure and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance, loading, unloading, royalties and taxes of all materials ,cost of all labour, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
Ground floor
23.11
-
4182.5
Warden Room
2.93
-
4182.5
1st floor
60.25
-
4442
2nd floor
60.47
-
4740.6
3rd floor
60.47
-
5083.8
4th floor
60.47
-
5478.6
5th floor
60.47
-
5932.6
6th floor
60.47
-
6454.7
7th floor
60.47
-
7055.1
12mm thick cement plaster in cement mortar (1:4) RCC surface without punning in all floors at all height finishing smooth to smooth surface of brick walls after raking out the joints including watering and curing rounding of corners with cost conveyance royalties and taxes of all materials and cost of all labour, scaffolding sundries and / T&P etc required for the work etc, complete as directed by the Engineer in charge.
-
-
-
Ground floor
2042.61
-
157.3
Warden Room
102.13
-
157.3
1st floor
1521.29
-
161.1
2nd floor
1521.29
-
165
3rd floor
1521.29
-
168.9
4th floor
1521.29
-
173.1
5th floor
1521.29
-
177.3
6th floor
1521.29
-
181.7
7th floor
1521.29
-
186.2
8th floor
187.98
-
190.8
12mm thick C.P. with C.M.(1:6) over the out side surface of wall including cost, conveyance, royalty, taxes of all materials, labour, T&P etc.requered for the work etc. complete. (out side Surface)
-
-
-
Ground floor
1011.64
-
130.1
Warden Room
189.78
-
130.1
1st floor
1743.88
-
135.5
2nd floor
1726.72
-
141.1
3rd floor
1726.72
-
147.1
4th floor
1726.72
-
153.3
5th floor
1726.72
-
159.8
6th floor
1726.72
-
166.7
7th floor
1726.72
-
173.9
8th floor
803.01
-
181.5
16mm thick C.P. with C.M.(1:6) over the inside surface of wall including cost, conveyance, royalty, taxes of all materials, labour, T&P requered for the work etc. complete.
-
-
-
Ground floor
1763.55
-
186.8
Warden Room
643.38
-
186.8
1st floor
1638.35
-
191.6
2nd floor
1596.67
-
196.5
3rd floor
1596.67
-
201.6
4th floor
1596.67
-
206.8
5th floor
1596.67
-
212.2
6th floor
1596.67
-
217.8
7th floor
1596.67
-
223.5
8th floor
903.1
-
229.4
Supplying fitting and fixing Ultra designer floor tile of approved size quality & thickness on floor / tread / steps and landing on 25mm thick bed of CM 1:1jointed with neat cement slurry mixed with pigment to match the shade of tiles including cleaning the floor surface smooth including cutting to proper size with cost conveyance royalties and taxes of all materials and cost of all lab our sundries and T&P etc required floor lathes work complete in all respect as directed by the Engineer in charge.
-
-
-
Ground floor
50.55
-
1032.7
Providing ,Fitting and Fixing minimum 8 m.m to 10m.m thick Vitrified Tile in flooring using Vitrified Tile of approved quality, colour and size(600 m.m x 600 m.m coloured printed series homogeneous) in floors, treads on steps and landings in all floors at all height on 25 m.m thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened & washed sharp river sand for mortar and grouted with neat white cement slurry joining the Vitrified Tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the Vitrified Tile if required (Tiles are to be immersed in the water for required time before use) including cost, conveyance, loading, unloading, stacking, royalties and taxes of all Materials, cost of all Labour, Sundries, T&P required for the work ,Watering,Curing for required days including cleaning the flooring space manually etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
Ground floor
1002.34
-
874.8
Warden Room
102.13
-
874.8
1st floor
890.01
-
884.4
2nd floor
890.01
-
894.5
3rd floor
890.01
-
905.1
4th floor
890.01
-
916.2
5th floor
890.01
-
927.9
6th floor
890.01
-
940.1
7th floor
890.01
-
953
8th floor
95.62
-
966.5
Providing, Fitting & Fixing of 8 mm. to 10mm. thick Vitrified Tile ( of size 600 m.m x 600 m.m ) of NITCO or equivalent make confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in dados skirting and riser of steps in all floors at all heights on 12m.m thick cement mortar (1:3) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge.
-
-
-
Ground floor
177.18
-
971.9
Warden Room
24.3
-
971.9
1st floor
133.74
-
986.3
2nd floor
133.74
-
1001.5
3rd floor
133.74
-
1017.4
4th floor
133.74
-
1034.2
5th floor
133.74
-
1051.8
6th floor
133.74
-
1070.2
7th floor
133.74
-
1089.6
8th floor
105.78
-
1109.9
Providing fitting and fixing of granite tiles in flooring with cement mortar (1:1) including cost convayance and royality etc complete
-
-
-
Ground floor
107.43
-
2241.7
Warden Room
7.2
-
2241.7
1st floor
78.84
-
2251.3
2nd floor
78.84
-
2261.3
3rd floor
78.84
-
2271.9
4th floor
78.84
-
2283.1
5th floor
78.84
-
2294.7
6th floor
78.84
-
2307
7th floor
78.84
-
2319.9
providing fitting and fixing of granite tiles in dadoos skirting with cement mortar (1:3) including cost convayance and royality etc complete
-
-
-
Ground floor
66.65
-
2270.6
Warden Room
3.6
-
2270.6
1st floor
37.61
-
2285.1
2nd floor
37.61
-
2297
3rd floor
37.61
-
2316.2
4th floor
37.61
-
2332.9
5th floor
37.61
-
2350.5
6th floor
37.61
-
2368.9
7th floor
37.61
-
2388.3
Providing wall putty with cement base of approoved quality including cost of all materials , taxes , labour, T&P required for the work complete as per direction of Engineer-in-Charge
-
-
-
Ground floor
3806.15
-
71.4
Warden Room
745.51
-
71.4
1st floor
3159.64
-
72.7
2nd floor
3117.96
-
74
3rd floor
3117.96
-
75.4
4th floor
3117.96
-
76.8
5th floor
3117.96
-
78.3
6th floor
3117.96
-
79.8
7th floor
3117.96
-
81.4
8th floor
1091.08
-
83
Painting 2 (Two) or more coats with Weather Coat Paint of approved Brand / Quality & Colour on the finished external plastered surface using required quantities of paint as specified by the concerned manufacturer to give an even shade over a coat of cement primer in all floors at all height , watering the surface before applying the Weather Coat Paint and curing for the required period including cost, coveyance, loading , unloading ,stacking and taxes of all Materials, cost of all Labour, Sundries ,Scafffolding ,Staging and T&P etc. required for the work complete in all respect as directed by the Engineer-in-charge.
-
-
-
Ground floor
1011.64
-
132.9
Warden Room
189.78
-
132.9
1st floor
1743.88
-
135.8
2nd floor
1726.72
-
138.9
3rd floor
1726.72
-
142.1
4th floor
1726.72
-
145.3
5th floor
1726.72
-
148.7
6th floor
1726.72
-
152.2
7th floor
1726.72
-
155.7
8th floor
803.01
-
159.4
Applying 2 (Two ) coats of Painting with Plastic Emulsion paint over white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete and second coat with Cement Wall Primer of approved make and shade in all floors and at all heights to the interior surface of the wall to make an even finished surface including sand papering, including cost,conveyance, loading, unloading,stacking, taxes of all Materials,cost of all Labour,Scaffoldings, Staging, Sundries, T&P etc.required for the work complete as directed by the Engineer -in -charge.
-
-
-
Ground floor
3806.15
-
138.3
Warden Room
745.51
-
138.3
1st floor
3159.64
-
141.3
2nd floor
3117.96
-
144.4
3rd floor
3117.96
-
147.6
4th floor
3117.96
-
150.8
5th floor
3117.96
-
154.2
6th floor
3117.96
-
157.6
7th floor
3117.96
-
161.2
8th floor
1091.08
-
164.9
Supplying, Fitting and Fixing M.S Grills / M.S shutter of approved Drawings & Designs made out of M S Flat, Square bars etc. of approved specifications / dimensions with necessary welded clamps fixed in proper position & plumb including a single coat of priming using approved quality metallic primer, making required holes in Massonary Walls / R.C.C Structures (where ever necessary) , grouting the clamps with C.C(1:2:4) with 12mm size black hard crusher broken granite stone chips & making good to the damages of Massonary Walls / R.C.C Structures including cost, conveyance, loading, unloading,stacking, royalties and taxes of all Materials , cost of all Labours, Staging, Scaffolding, Sundries, T&P etc. complete as directed by the Engineer-in-charge.( Weight to be taken up properly prior to fixing the grills in the works and payment to be made accordingly )
-
-
-
Ground floor
5814.13
-
58.3
Warden Room
368.55
-
58.3
1st floor
5080.73
-
58.3
2nd floor
4885.31
-
58.3
3rd floor
4885.31
-
58.3
4th floor
4885.31
-
58.3
5th floor
4885.31
-
58.3
6th floor
4885.31
-
58.3
7th floor
4885.31
-
58.3
8th floor
1322.78
-
58.3
Painting with Synthetic enamel paint of approved colour, shade and brand like ICI/ Asian/ Berger on Steel work/New wood work in two or more coats as required to give an even shade including an under coat of suitable primer of approved brand and manufacturer including cost of all materials with taxes and transportation, loading, unloading, scaffolding, all labour, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge including filling gaps with putties, scrapping, sand papering and cleaning the surface to make free from rusts, dusts and oily substances before applying primer etc. complete.
-
-
-
Ground floor
128.33
-
192.9
Warden Room
45.59
-
192.9
1st floor
144.87
-
199.1
2nd floor
144.87
-
204.1
3rd floor
144.87
-
209.2
4th floor
144.87
-
214.5
5th floor
144.87
-
220
6th floor
144.87
-
225.6
7th floor
144.87
-
231.4
8th floor
46.87
-
237.4
Supplying, Fitting and Fixing of Stainless Steel of 304 grade in Handrail using 50mm dia of 2mm thick circular pipe with stainless steel wall mounted short piece in stair case as per approved Drawings, Design and Specification,welding, buffing, polishing etc with cost, conveyance,loading,unloading ,stacking & taxes of all materials,cost of all labour, T&P etc. required for the work complete in all respect in all floors at all height as directed by the Engineer-in charge
-
-
-
Ground floor to 8th floor
7132.59
-
289.2
Warden Room
250
-
289.2
Supplying, Fitting and Fixing well dressed and well seasoned Sal Wood Choukaths ( of different length and size i.e 75m.m x 100 m.m OR 62.5x125mm) in proper position & plumb including two coats of coaltaring to the wall and lintel faces of choukaths including cost of coaltar and all labour & T&P charges of coaltaring alongwith fixing required nos. of W.I. clamps to the choukaths with approved qualities of screws in all floors at all height including cost, coveyance, loading , unloading,stacking and taxes of all Materials, cost of all Labour,Sundries, T&P required for the work etc. complete in all respect as directed by the Engineer- in- charge.
-
-
-
Ground floor
6.89
-
50400.8
Warden Room
0.43
-
50400.8
1st floor
13.98
-
50400.8
2nd floor
13.98
-
50400.8
3rd floor
13.98
-
50400.8
4th floor
13.98
-
50400.8
5th floor
13.98
-
50400.8
6th floor
13.98
-
50400.8
7th floor
13.98
-
50400.8
Providing fiting fixing of 32mm thick flush dor made out of 32mm thick BWR block board covered with 4mm veneer to one side with melamine po0lish with cost of all fixture and material labour etc complete
-
-
-
Ground floor
35.28
-
15582
Warden Room
20.16
-
15582
1st floor
76.02
-
15582
2nd floor
76.02
-
15582
3rd floor
76.02
-
15582
4th floor
76.02
-
15582
5th floor
76.02
-
15582
6th floor
76.02
-
15582
7th floor
76.02
-
15582
Supplying, fitting, fixing up window (sliding type) having powder coated made up aluminum Section 9778 as windows frame section No. 4095,4096 & 9777, 3994 as shutter frame including lucking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.
-
-
-
Ground floor
777
-
604.4
1st floor
741.68
-
604.4
2nd floor
741.68
-
604.4
3rd floor
741.68
-
604.4
4th floor
741.68
-
604.4
5th floor
741.68
-
604.4
6th floor
741.68
-
604.4
7th floor
741.68
-
604.4
8th floor
17.82
-
604.4
Supplying, fitting, fixing of 5mm thick black glass as panel fitted with rubber bending including lucking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.
-
-
-
Ground floor
158.9
-
665.7
1st floor
151.67
-
665.7
2nd floor
151.67
-
665.7
3rd floor
151.67
-
665.7
4th floor
151.67
-
665.7
5th floor
151.67
-
665.7
6th floor
151.67
-
665.7
7th floor
151.67
-
665.7
8th floor
3.65
-
665.7
Providing and fixing of Partly fixed, partly top hung and partly louvered windows of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS- 513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint pecification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Section for internal top and bottom frames in the louvered areas should be 18 x 40 mm.Top hung shutter should be of 46 x 46 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length , jointed with corner bracket and frames are fixed to the concrete/ masonry wall by means of self expanding screws and glass to be used of 5mm reflective with all taxes etc comoplete.
-
-
-
Ground floor to 8th floor
36.72
-
4326.1
Providing and Fixing of Structural Glazing of approved make to be fabricated from roll formed sections made of pre painted steel (base steel as per Is 513 of 0.6mm thick "D" quality galvanized as per IS 277 with zinc of 120gm per sqm ) with primer of 5-7 5.7 microns thick and finished paint with polyster paint ( Black/pearlwhite/chocolatebrown)of 12-16microns and the sizesof the outer frame being 46x70mm and fixed beading are of 18x25mm sectionsfor internal top and bottom frames inthe louvered area should be 18x40mm top hung should be46x46mm. Accessories/ed beadings are of 18x25mm.accessoriesgaskets are to be used as per the manufacturers supply and specifications like handle being made of high grade alluminium powder coated and with nylon recever and gasket will be made of EPDM all corner brackets are tobe made of CRCA with Zinc phosphating. The mullion caps and louvered clips should be glass filled nylon. The sectionsare to be cut to length jointedand assembled by means of self expanding screws and glass to be used of 6mm thick black glass with all taxes complete
-
-
-
For All Floors floor
223.09
-
6250.4
Filling in foundation trenches and plinth with excavated earth well watered and rammed in layers not exceeding 23 c.m in depth including all lead and lift, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer- in- charge.
-
-
-
Ground Floor
663.88
-
112.94
Supplying, fitting and fixing of 100 mm PVC rain water down pipe schedule-40 including cost of all materials,taxes, labour and T&P required for the work.
118.5
-
190
25 mm. thick Grading Concrete of proportion (1:2:2) on top of the Roof Slab using approved quality of cement, 6 mm. size hard crusher broken granite stone chips with screened & washed sharp sand for mortar of approved quality from approved quarry, washed & cleaned, free from all debrises and silt along with providing a layer of waterproofing treatment by using pedicrete (URP/SBR) Latex before grading concret (Mix - Latex @ 0.54 Ltr/Sqm & Cement @ 0.008Qntl /Sqm) including hoisting, lowering and laying concrete in all floors at all height after chipping, chiseling and cleaning the entire roof surface by using wire brush, finished smooth to proper required slope and gradient including cost, conveyance, royalties, loading, unloading,stacking and taxes of all Materials, cost of all Labour, T &P, Sundries, Watering ,Curing etc.required for the work complete in all respect as directed by the Engineer-in-charge.
-
-
-
Warden Room
102.13
-
276.4
1st floor
66.51
-
303.7
2nd floor
2.53
-
335.1
8th floor
1214.58
-
651.1
Providing & Sealing the joint with seismic pop up system comprised flexi dust proof gasket confirm to BS4225 on either side of joint s ,mill finish free float centre pan frame and Aluminium base frames confrim to alloy of 6063 T5/T6 including providing of EPDM moisture barrier confirm ASTM2240 7 ASTM-G53 784 fixing by Sanfield Bond confrim to ASTM C-881 complete in all respect as per manufacture Drawing and Specification SAPX-600 (Floor)of all materials and labour T&P etc complete.and as per direction of the Engineer-in-Charge .
29.12
-
11504.7
Providing the joint with 151mm x 1.93mm thick powder coated/Anodized Extruded Aluminum frame to alloy of 6063 T5/T6 Specifications having snap locking clips system complete in all respect as per manufacturer Drawing and specifications. SNPG-600(Internal Wall Location)
111.36
-
7642.7
Anodized/Powder coated Centre Plate confirm to alloy of 6063 T5/T6 including providing of TWO LAYERS of EPDM moisture barrier confirm to ASTM 2240 & ASTM - G53 & 84 fixing by Sanfield Bond confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. SNJG-600( External Wall Location)
128
-
7949.6
Providing fitting and fixing up 3mm thick Aluminum Composite panel walling made up rectangular aluminum section No. TU 512 of size 50.8 x 25.40mm for frame work of 2’-6” x 4’-0” with 3mm thick ACP (AL-40)including lining the joints with silicon including all fittings, cost, conveyance, taxes of all materials, cost of all labour, labour cess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
All Floors
49.92
-
4074.8
Providing water proofing to slab & sunken slab by applying zycoseal ,zycoprime, elastobar ,grouting & saeling the pipe and concrete joints etc complete. as per approved specification and direction including cost and conveyance of all materials, cost of labour, T&P, required for the work etc. all complete excluding GST as per the direction of Engineer-in-Charge.
1388.56
-
550
Fitting and fixing vetrified tiles with matt finish Kajaria ( Fog Perla) on floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost conveyance, royalities and taxes etc. all complete as per direction of Engineer in charge. (Ceramic floor tiles of premium grade Kajaria / Somany make of size 600x600mm to be pre-approved by the Engineer in charge)
837.12
-
1500
Fitting and fixing vetrified tiles of Kajaria (Duren Marfil) to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including cost conveyance, royalities and taxes etc. all complete as per direction of Engineer in charge. (Ceramic wall tiles of Size (Duren Marfil)600x300mm premium grade Kajaria / Somany make special plain / printed series to be pre-approved by the Engineer in charge)
1747.2
-
1500
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm of Darwaja Make or equivalent as per direction of E.I.C. Per Sqm.
524.16
-
6000
Providing and fixing of GRC jalli with necessary arrangements, fittings as per approved specificatio and direction including cost and conveyance of all materials, cost of labour, T&P, required for the work etc. all complete excluding GST as per the direction of Engineer-in-Charge.
191.79
-
7250
Supplying and fitting fixing of un-plasticised Poly Vinylchloride (UPVC)(FENESTA/NCL/VEKA LTD) Ventilator/ with top hung fix -60 series duly manufactured using upvc reinforced profiles of 60 mm x 55mm x 2.5 mm for outer frame .75 mm x 60mm x 2.25 mm for casement window sash profile capable of mounting single glazing system .structurally reinforced with horizontal dip galvanised up to 50 microns of minimum thickness of 1.5 mm pre fabricated nd weided through fusion welding the door sash shall b fitted with 6 mm thick clear toughened glass of SAINT GOBAIN make duly fitted with EPDM weathering seal resistant accessories likeclipping locking system made of alluminiu
0.72
-
7115
Supplying and fitting fixing of un-plasticised Poly Vinylchloride (UPVC)(FENESTA/NCL/VEKA LTD)Casement Window with top fix -60 series duly manufactured using upvc reinforced profiles of 60 mm x 55mm x 2.5 mm for outer frame .75 mm x 60mm x 2.25mm for casement window sash profile and 74 mm x 60 mm x 2.5mm mullion profilr capable of mounting single glazing system .structurally reinforced with horizontal dip galvanised up to 50 microns of minimum thickness of 1.5 mm pre fabricated nd weided through fusion welding the door sash shall b fitted with 6 mm thick clear toughened glass of SAINT GOBAIN make duly fitted with EPDM weathering seal resistant accessories likeclipping locking system made of alluminium.
10.53
-
7586
Supplying and fitting fixing of un-plasticised Poly Vinylchloride (UPVC)(FENESTA/NCL/VEKA LTD)Casement Door -60 series duly manufactured using upvc reinforced profiles of 60 mm x 55mm x 2.5 mm for outer frame .102 mm x 60mm x 2.25mm for casement door sash profile and 74 mm x 60 mm x 2.5mm mullion profilr capable of mounting single glazing system .structurally reinforced with horizontal dip galvanised up to 50 microns of minimum thickness of 2.0 mm pre fabricated nd weided through fusion welding the door sash shall b fitted with 12 mm thick wpc board of green ply make duly fitted with EPDM weathering seal resistant accessories likeclipping locking system made of alluminium..
2.88
-
8693
Dismentalling the old RCC beam ,slab etc and removing the debries away from work site as directed by E.I.C etc complete
23.91
-
1142.9
Dismentalling the old brick masonry upto 3.00mtr height and removing the debries away from work site as directed by E.I.C etc complete
25.57
-
1074.5
Dismentalling the old Doors ,windows and ventilators and removing the debries away from work site as directed by E.I.C etc complete
7.96
-
309.1
Internal Electrical Portion
-
-
-
EXTERNAL ELECTRICAL WORKS
-
-
-
11KV HT PANEL
-
-
-
Supply, Installation, Testing and Commissioning of outdoor type floor mounted metal clad, 11KV 630A VCB Panel with suitable for 50Hz 3 Phase system, suitable for 18.3kA/3sec short circuit withstand capacity. Switchgear Panel enclosure of sheet steel preferably Aluzinc, dust tight, vermin proof, totally enclosed cubicle floor mounting, free standing type with single break, horizontally drawout type breaker with trip free mechanism as per latest standard i.e. IS/IEC 62271- 200 as amended up to date and as per Technical specifications, IP55 for VCB Panel enclosure. Switchgear Panel shall be electrically & mechanically interlocked as per IEC 62271-1, full voltage insulated copper Busbar with heat shrinkable sleeving, complete with suitable metering & protection devices, breaker featured with mechanical ONOFF indicator with hand trip device and all accessories such as shunt trip coil, motorized & manually operated spring charging mechanism, emergency trip push buttons, auxiliary switch of 2NO + 2NC, interconnections, space heaters, panel earthing etc. and equipped with following switchgear and accessories including connection suitable for 3C x 95 to 3C x 300 sqmm XLPE 11 kV cable (cable entry from bottom) to be connected through heat shrinkable jointing material etc as required.
1
-
663577
11KV HT METERING CUBICLE: (Outdoor type)
-
-
-
Supply, erection, testing and commissioning of 11kV Outdoor type metering cubicle with a Trivector meter as per the requirement of EB norms, get it caliberated by MRT Division of EB, commission at site in the presence of EB/MRT Division personnel. The quoted rate shall be inclusive of CTS, PTs, Bus Bars, etc.,
1
-
196364
11KV HT CABLING & TERMINATIONS:
-
-
-
Supply, laying, testing & commissioning of 11KV, 3C x 95 Sq.mm. Earthed-Stranded Alumimum conductor XLPE insulated, Armoured Cable in cable Trench.
100
-
1447
Supply and making indoor / outdoor cable end terminations with heat shrinkable jointing kit complete with all accessories suitable for following size of 3core, XLPE aluminium conductor cable of 11 KV grade as required.
-
-
-
11KV, 3C X 95Sq.mm - INDOOR
6
-
12875
TRANSFORMER
-
-
-
Design, supply, installation, testing and commissioning of 250KVA, 11KV/433V, Vector symbol Dyn11, Z=4.5%, Delta/Star connected, ONAN, 3 Phase/3 Phase and neutral, Oudoor type distribution Transformer complete with OFF Circuit Tap Changer and all standard accessories, HV cable box and LV box. Transformer shall be as per single line diagram and specifications. Transformer will be plinth mounted and rate shall include all civil work and other accessories. However, the exact sizes including type of construction to be specified in a shop drawings, same should be be submitted to consultants by Electrical Contractor before execution.
1
-
416631
YARD FENCING
-
-
-
Supply and erection of 11KV HT EB & Transformer yard fencing using 10gauge chain link / Wire Mesh frames made out of 50 x 50 x 6 mm angle iron outer frame work and chain link / Wire mesh of 10 Gauge, 75mm ISMC verticals 1800mm above formed level. Height of the fencing is 1800mm from the FFL.
75
-
4800
Miscellenous Items:
-
-
-
Supply and installation of HT/LT Danger board as required by the CEA/ CEIG authorities.
4
-
500
Supply and fixing of HT/LT cable route indicator (cast iron) made out of MS flat and angle iron
15
-
3500
Shock treatment chart laminated( At Electrical room and LMR)
3
-
1000
Rubber mat ISI approved 2m x 1m
6
-
1500
First aid kit (At Electrical Room)
2
-
2000
Providing and laying of 600mm (L) x 600mm (W) x 1000mm (D) Inspection Chamber with pre cast Cover and all necessary accessories as required
6
-
10000
Providing and laying of RCC Hume pipe(NP2) for HT & LT Cables Cost to include RCC collar and necessary civil works like jointing of hume pipes with mortar as required.(Excavation & Back filling cost not included) - For HT & LT cables & Earthing
-
-
-
300 mm Dia RCC Hume pipe
100
-
1140
150 mm Dia RCC Hume pipe
50
-
826
SERVICE CHARGES
-
-
-
Arranging the required details from - duely making the formalities and arranging service of the installation with the projected charges and arranging required approval from the required government Electrical Inspectorate and permission for the energising the HT installation works. Also this item should include charges towards arranging temporary power supply for construction and making payments, monthly bills and renewal/upgrading temporary power supply.
1
-
100000
Low Voltage Switchgear
-
-
-
Design, Fabrication, Supply, erection, testing and commissioning of LT Panel boards of cubicle floor mounting type made out of 14/16 Gauge CRCA sheet steel construction dust and vermin proof for indoor use degree of protection is IP52, extensible on both sides, rated for 433V, 3phase 50 Hz AC supply 4 wire system. The painting of the complete system shall be by powder coating (The colour as per the choice of the client) or as per the requirement of the employer.
All the panel boards should be with suitable cable chamber for outgoing cables with suitable removal type gland plates. All switch boards shall be complete with double Earthing arrangements in entire length of the panel and cable chambers using sutiable rating of aluminium flats, feeder identifications, etc., as per Standards
-
-
-
LT Kiosk -1
1
-
261257
250KVA DG SET with Acoustic & AMF Panel
-
-
-
Supply, Installation, testing and commissioning of 250 KVA Silent type Diesel Generator Set complete with Diesel Engine suitable for Generator application, developing 1500RPM with an overloading capacity of 10% for one hour in any 12 continuous hours opeartion Generally confirms to BS:5514, directly coupled to 250 KVA at 0.8 Power factor, 415V, 3 Phase , 4 wires, 50 cycles per second self excited, self regulated , with brushless excitation, Alternator generally confirms to BS:5000/IS:4722 . DG set shall be complete with radiator, residential type silencer, electronic governor, cable termination box , MS mounting frame, fuel piping, diesel day tank, 24VDC Battery, Battery mounting frame, oil level indicator with guage board, and all other accessories as per specifications and schedule. Diesel Generator set shall be mounted on cushy foot or similar type of vibration Isolators. The cost of Exhaust pipe shall be excluded in this item. The DG Set shall be suitable for auto-mains failure start and auto / manual operations. The cost shall include fuel oil required for testing DG Set at full load. The cost shall include All civil works for 250 kVA DG set foundation with all neccessory accessories.
1
-
1554854
Exhaust System (Standalone structure)
-
-
-
Supply and providing exhaust piping complete with exhaust pipe, fibre glass insulation with aluminium cladding, pipe accessories like flanges, bends, elbows, rain protection hoods, etc.. The exhaust piping shall be fixed from floor with MS angle supports, using necessary clamps, anchorbolts, vibration isolation pads, etc., as shown in the drawing. Pipe size shall be suitable for 250 KVA Diesel generator sets
-
-
-
6" dia - MS Class "B" Exhaust pipe (Bends will be measures double) with all necessary fittings.
40
-
3000
50 mm Thick Thermal insulation of 6" MS Exhaust pipe.(Bends will be measures double).
40
-
750
Supply and Installation of exhaust piping with 6" dia MS pipe including Hardware, Nutbolts, Flanges & Gaskets steel supports (250KVA DG Set)
40
-
2500
Supply & installation of 6" Bend.(Bends shall be measured Extra @1 Mtr)
2
-
9000
Supply & installation of 50 mm thk. Insulation with rockwool density-64 kg/cm3 and 24 guage aluminium cladding for 6" MS Pipe for 250KVA DG set
40
-
1180
Supply & installation of 50 mm thk. Insulation with rockwool density-64 kg/cm3 and 24 guage aluminium cladding for Silencer for 1 x 250KVA DG set
1
-
27400
Supply, Fabrication & Installation of 1" dia class 'B' MS Pipe
50
-
298
Supply & Fixing of 1" dia Ball Valve in fuel line
2
-
9760
Supply & Installation of MS Steel structure & support for exhaust pipe, silencers and misc. supports with 1 coat of red oxide & 2 coats of enamel paint (Including fastners wherever required
2500
-
105
Control Cablea & Terminations:
-
-
-
Supply, laying, testing and commissioning of following sizes of 1100Volts Copper Armoured Control Cables
-
-
-
4C x 2.5 Sq.mm
25
-
202
12C x 2.5 Sqmm
25
-
1004
End Terminations for above sizes of Copper Armoured Control Cables with all required accessories
-
-
-
4C x 2.5 Sq.mm
2
-
252
12C x 2.5 Sqmm
2
-
254
Preparation of necessary Drawings for all DG Sets, getting approval from the Chief Electrical Inspectorate / Electricity board / Pollution Control Board before taking up work and to furnish Completion Report arranging for Inspection,giving trial run on load, obtaining approval for commissioning the sets by paying necessary fee for inspection, etc., complete. (Necessary statutory fees will be re-imbursed to the Contractor after producing the receipts).
2
-
50000
CONVENTIONAL LIGHTNING PROTECTION SYSTEM AS PER IS/IEC 62305
-
-
-
Air Terminal
-
-
-
Supplying, Fixing & proper termination of vertical Air-termination of 8 mm Aluminum Round Conductor, Roof conductor holder for parapet- Polyamide Conductor holder with M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder ( Conductor holder @ 1 meter distance) , cross universal connector and other necessary accessories as required etc.
10
-
120
Down Conductor
-
-
-
Supply, installation, testing and commissioning of 8 mm Aluminum Round Conductor complete as specified in drawing & Meets the requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305) with Conductor holder @ 1 meter distance and other necessary accessories as required.
1000
-
120
Supply, installation, testing and commissioning of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 25x3 mm GI strip and other necessary accessories as required
40
-
225
EARTHING
-
-
-
Supply, erection and testing of GI Plate earth electrode as per IS 3043 standards complete with 3 mtrs long, 40mm dia. GI pipe, 600 x 600 x 6mm size GI plate and 1 run of 40 x 6mm GI flat upto test link from plate earth electrode, watering funnel and necessary bolt & nuts. Complete with excavation and construction of 450mm x 450mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm cast iron / RCC cover with frame. The earth electrode shall be filled with the alternate layer of charcoal and salt. (For body Earthing)
6
-
5132
Supply, erection and testing of Copper Plate earth electrode as per IS 3043 standards complete with 3 mtrs long, 40mm dia GI pipe, 600 x 600 x 3.15mm size Copper plate and 1 run of 25 x 3mm Copper flat upto test link from plate earth electrode, watering funnel and necessary bolt & nuts. Complete with excavation and construction of 450mm x 450mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm cast iron / RCC cover with frame. The earth electrode shall be filled with the alternate layer of charcoal and salt. (For NEUTRAL EARTHING)
4
-
14515
EARTHING CONDUCTORS
-
-
-
Supply and laying of 40 x 6 mm GI flat with necessary connections of 3/8"x2" Brass, Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges with all necessary accessories as required (Trafo & DG set)
150
-
178
Supply and laying of 25 x 6 mm GI flat with necessary connections of 3/8"x2" Brass, Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges with all necessary accessories as required
50
-
96
Supply and laying of 40 x 6 mm CU flat with necessary connections of 3/8"x2" Brass, Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges with all necessary accessories as required ( Trafo & DG sets)
150
-
1512
Supply and laying of 25 x 6 mm CU flat with necessary connections of 3/8"x2" Brass, Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges with all necessary accessories as required
50
-
972
Supply and laying of 25 x 3 mm GI flat with necessary connections of 3/8"x2" Brass, Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges with all necessary accessories as required
100
-
69
INTERNAL AND WARDEN ELECTRICAL WORKS
-
-
-
Low Voltage Switchgear
-
-
-
Design, Fabrication, Supply, erection, testing and commissioning of LT Panel boards of cubicle floor mounting type made out of 14/16 Gauge CRCA sheet steel construction dust and vermin proof for indoor use degree of protection is IP52, extensible on both sides, rated for 433V, 3phase 50 Hz AC supply 4 wire system. The painting of the complete system shall be by powder coating (The colour as per the choice of the client) or as per the requirement of the employer. All the panel boards should be with suitable cable chamber for outgoing cables with suitable removal type gland plates. All switch boards shall be complete with double Earthing arrangements in entire length of the panel and cable chambers using sutiable rating of aluminium flats, feeder identifications, etc., as per Standards.
-
-
-
Main LT Panel
1
-
558075.44
Utility Panel
1
-
284459.93
Lift Panel
6
-
34862.17
Solar lighting panel
1
-
75671
Supply and laying of 1100 V grade, (XLPE/PVC) insulated aluminium conductor, armoured power cable as per specifications. The cables shall be laid in cable trenches or buried directly underground or on cable trays. The cost of the cable trays or ladders, excavation and back filling of trenches will be measured separate. The unit cost of the cable shall include clamps, fasteners, saddles, tags etc. as required for proper instllation.
-
-
-
3.5C x 400 Sqmm, Al. cable
100
-
2224
3.5C x 300 Sqmm, Al. cable
100
-
1768
3.5C x 150 Sqmm, Al. cable
200
-
923
3.5C x 50 Sqmm, Al. cable
100
-
370
3.5C x 35 Sqmm, Al. cable
50
-
287
4C x 16 Sqmm, Al. cable
600
-
191
4C x 6 Sqmm, Al. cable
50
-
141
4C x 10 Sqmm, Cu. cable
100
-
597
3C x 6 Sqmm, Cu. cable
300
-
144
END TERMINATION
-
-
-
Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.
-
-
-
3.5C x 400 sq.mm
4
-
677
3.5C x 300 sq.mm
2
-
636
3.5C x150 sq.mm
2
-
448
3.5C x 50 sq.mm
2
-
306
3.5C x 35 sq.mm
2
-
298
4C x 16 sq.mm
24
-
180
4C x 6 sq.mm
2
-
104
4C x 10 sq.mm
4
-
165
3C x 6 sq.mm
10
-
134
DISTRIBUTION BOARDS:
-
-
-
Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.
-
-
-
8WAY (4 + 24) TPN DOUBLE DOOR, HORIZONTAL TYPE
8
-
18106
for LDB + PDB GF to terrace
-
-
-
12WAY (2 + 12) SPN DOUBLE DOOR, HORIZONTAL TYPE
8
-
5483
( for Emergency )
-
-
-
4WAY (4 + 12) TPN DOUBLE DOOR, HORIZONTAL TYPE
1
-
15924
( for Solar )
-
-
-
4WAY TPN DOUBLE DOOR, HORIZONTAL TYPE (Warden Quarter)
1
-
5972.87
FITTINGS & FIXTURES
-
-
-
Supply Installation, testing and commissioning of the following lighting luminaires including all necessary accessories like electronic driver, holder, control gear, fixing accessories, down rod, chain suspender, supporting arrangements, clamps, as per the site requirments.
-
-
-
Supply , installation testing and commissioning of 36Watts LED Surface mounted type light fitting with all accessories or equivalent.
50
-
2327.56
Supply , installation testing and commissioning of 20Watts LED tube wall mounted/Surface type light fitting with all accessories as required.
1304
-
1142.83
Supply , installation testing and commissioning of 2X20Watts LED capsule Surface mounted type light fitting with all accessories as required.
12
-
2919.92
Supply , installation testing and commissioning of 15Watts LED Surface mounted Down lighter with all accessories as required.
160
-
2256.48
Supply , installation testing and commissioning of 10Watts LED bulkhead wall mounted type light fitting with all accessories as required-(Wether Proof)
11
-
2327.56
Supply , installation testing and commissioning of 10Watts LED Wall light fitting with all accessories as required. (Bulb)
188
-
254.28
Supply , installation testing and commissioning of 1200mm wide Ceiling fan point with all accessories as required
494
-
1901.64
Supply , installation testing and commissioning of 450mm wide Exhaust Fan point with all accessories as required
13
-
2482.39
Sockets
-
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 6 /16 A modular socket outlet and 16 A modular switch, connections etc. as required.
14
-
664
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 6A modular socket outlet and 6 A modular switch, connections etc. as required.
614
-
521
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3nos of 6 pin 6A modular socket outlet controlled by 1no of 16 A modular switch, connections etc. as required.-(UPS)
5
-
1501
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2nos of 6 pin 6A modular socket outlet controlled by 1no of 16 A modular switch, connections etc. as required.-(UPS)
5
-
1168
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 1nos of 6 pin 16A modular socket outlet controlled by 1no of 16 A modular switch, connections etc. as required.-(UPS)
5
-
835
Providing and fixing following rating and breaking capacity TPN Isolator in metal clad wether proof enclosure box for ODU Units
-
-
-
32A, 3P, 16kA Isolator enclosed in metal clad wether proof enclosure Box.
2
-
1966
32A, 4P, 16kA Isolator enclosed in metal clad wether proof enclosure Box.
2
-
2212
Circuit Wiring
-
-
-
2 Runs of 2.5 sqmm multi strand FRLS insulated copper conductor wire in 25 mm dia FRLS PVC conduit along with 1 Run of 2.5 sq.mm multi strand FRLS insulated copper earth wire with all necessary accessories as required.
11200
-
212
Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
5750
-
254
Point Wiring :
-
-
-
Point wiring of light, using 1100 volt grade, 2 Runs of 1.5 sqmm multi strand FRLS insulated copper conductor wire along with 1 Run of 1.5 sq.mm multi strand FRLS insulated copper earth wire, drawn in 19/20mm dia, 2mm thick rigid FRLS PVC conduit in a concealed / open conduit system. The wiring shall be complete with all conduit and wiring accessories like deep junction boxes, collars, tees, bends, elbows, MS boxes, GI pull wires, clamps, spacers, screws, etc. The rate shall include providing mounting boxes with tapped holes for lights switches, moulded front plates with brass screws earthing of all points using third core of the cable, DB to switch control will be measured as circuit wiring. The switch boxes shall be flush mounted in brick wall. The point wiring shall be as per specification. Group C
295
-
1075
Two light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-C
108
-
1311
Three light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-C
25
-
1547
Point wiring of light, using 1100 volt grade, 2 Runs of 1.5 sqmm multi strand FRLS insulated copper conductor wire along with 1 Run of 1.5 sq.mm multi strand FRLS insulated copper earth wire, drawn in 19/20mm dia, 2mm thick rigid FRLS PVC conduit in a concealed / open conduit system. The wiring shall be complete with all conduit and wiring accessories like deep junction boxes, collars, tees, bends, elbows, MS boxes, GI pull wires, clamps, spacers, screws, etc. The rate shall include providing mounting boxes with tapped holes for lights switches, moulded front plates with brass screws earthing of all points using third core of the cable, DB to switch control will be measured as circuit wiring. The switch boxes shall be flush mounted in brick wall. The point wiring shall be as per specification. Group B
280
-
1075
Two light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-B
100
-
1311
Three light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-B
25
-
1547
Point wiring of light, using 1100 volt grade, 2 Runs of 1.5 sqmm multi strand FRLS insulated copper conductor wire along with 1 Run of 1.5 sq.mm multi strand FRLS insulated copper earth wire, drawn in 19/20mm dia, 2mm thick rigid FRLS PVC conduit in a concealed / open conduit system. The wiring shall be complete with all conduit and wiring accessories like deep junction boxes, collars, tees, bends, elbows, MS boxes, GI pull wires, clamps, spacers, screws, etc. The rate shall include providing mounting boxes with tapped holes for lights switches, moulded front plates with brass screws earthing of all points using third core of the cable, DB to switch control will be measured as circuit wiring. The switch boxes shall be flush mounted in brick wall. The point wiring shall be as per specification. Group- A
280
-
1075
Two light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-A
100
-
1311
Three light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-A
25
-
1547
Lift well lighting
-
-
-
Supply & Wiring of elevator shaft light points using 2R x 2.5 + 1.5 Sq.mm. FRLS PVC insulted wires in 25 mm dia PVC/MS conduit (exposed as per Lift Vendor requirement for a set of light points controlled by 16A switch located at Lift M/c room, also, 6/16A switched socket outlets shall be provided near each light point for each floor. The rate shall include cost of switches, sockets, bulk head fittings with wire mesh & lamps and all associated accessories & as required by Inspectorate.
6
-
19221.05
PVC pipes
-
-
-
Supplying and fixing of 20mm PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
100
-
96
Supplying and fixing of 25mm PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
100
-
101
Data & Telephone System
-
-
-
Supplying and fixing of clip in type modular telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
5
-
386
Supplying and fixing of LAN point with clip in type modular lan socket ISI marked mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
5
-
537
Supplying and fixing T.V. antenna socket outlet modular type ISI marked on mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
3
-
387
Supplying and drawing UTP 4 pair LAN cat-6 cable in the existing surface / recessed PVC conduit as required.
350
-
64
Supplying and fixing of 25mm PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
125
-
101
Supply & Installation of Server Rack suitable for above mentioned system (Inclusive of all accesories like Power Strip, Patch panel, switch, Cabling, Mounting supports & patch panel(50 pair) for Tele tag block)
1
-
12903.58
Supply & fixing of Cat6 RJ45 to RJ45 7ft Patch Cord - Rack side for Data Resource
5
-
495
UPS & INVERTER
-
-
-
Supply and Installation of 10KVA UPS with suitable batteries for 90 Mins battery backup
1
-
212027.18
EARTHING
-
-
-
Supply, erection and testing of GI Plate earth electrode as per IS 3043 standards complete with 3 mtrs long, 40mm dia. GI pipe, 600 x 600 x 6mm size GI plate and 1 run of 40 x 6mm GI flat upto test link from plate earth electrode, watering funnel and necessary bolt & nuts. Complete with excavation and construction of 450mm x 450mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm cast iron / RCC cover with frame. The earth electrode shall be filled with the alternate layer of charcoal and salt. (For body Earthing)
6
-
5106
Supply, erection and testing of Copper Plate earth electrode as per IS 3043 standards complete with 3 mtrs long, 40mm dia GI pipe, 600 x 600 x 3.15mm size Copper plate and 1 run of 25 x 3mm Copper flat upto test link from plate earth electrode, watering funnel and necessary bolt & nuts. Complete with excavation and construction of 450mm x 450mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm cast iron / RCC cover with frame. The earth electrode shall be filled with the alternate layer of charcoal and salt. (For NEUTRAL EARTHING)
2
-
9863
Supply and laying of 25 x 6 mm CU flat with necessary connections of 3/8"x2" Brass, Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges with all necessary accessories as required
100
-
476
Supply and laying of 25 x 3 mm GI flat with necessary connections of 3/8"x2" Brass, Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges with all necessary accessories as required
328
-
120
Providing and fixing 8 SWG G.I. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required
300
-
25
CABLE TRAYS AND CONDUIT TRAYS
-
-
-
LADDER TYPE CABLE TRAYS
-
-
-
Supply and installation of pregalvanised ladder type cable trays without cover. The rate shall include bends, Tees, all supporting brackets, anchor fasteners, screws, bolts, nuts etc., including painting of cable trays. Thickness of sheet steel shall be 2 mm. cable tray sizes above 450mm to 750mm shall be supported with 40X40X5mm angle supports & 1000mm above shall be supported with 50X50X5mm at every 1.5 meters.
-
-
-
Size of Cable Tray :600 mm x 50 mm
100
-
907
Size of Cable Tray :450 mm x 50 mm
100
-
800
Size of Cable Tray :300 mm x 50 mm
50
-
528
Size of Cable Tray :150 mm x 50 mm
25
-
447
Size of Cable Tray :100 mm x 50 mm
25
-
348
Perforated type cable tray (for communication)
-
-
-
Supply and installation of Pregalvanised Perforated type cable trays without cover. The rate shall include bends, Tees, all supporting brackets, anchor fasteners, screws, bolts, nuts etc., including painting of cable trays. Thickness of sheet steel shall be 2 mm. Support sizes similar to ladder type trays
-
-
-
Size of Cable Tray :450 mm x 50 mm
50
-
1056
Size of Cable Tray :300 mm x 50 mm
50
-
806
Size of Cable Tray :150 mm x 50 mm
100
-
446
SOLAR SYSTEM
-
-
-
Supply, Installation and Commissioning of 35 kWp Solar Power Project (Fixed Tilt System) On Grid System . Will includes the following items - For Emergency Lighting
1
-
3500000
ANALOGUE BASED CCTV SYSTEM
-
-
-
Closed Circuit Television system in conformity with specification. Vendor to List any additional item required for the Job.
-
-
-
Digital video recorder with Software. - Hard disk capacity - to record upto 30 days for the mentioned no. of cameras mentioned
-
-
-
Supply, installation, testing and commissioning of 16 Channel Digital Video Recorder Software - Includes a software license
1
-
35000
Supply & Installation of 40" LED Monitor similar to Sony Bravia vide specification. - VU tv
1
-
25000
Supply & Installation of Fixed dome Camera, 1/3", color, 600 TVL, adv features, ≤0.1Lux / F1.2 (color); 0.01Lux / F1.2 (B/W), PAL, 24 VAC/12 VDC, fixed 6mm lense vide specifications including power supply.
10
-
6000
Supply & laying of RG-6, Co-axial Armoured FRLS Cable in 19mm Dia PVC Conduit
500
-
80
Supply & laying of of 3 core 1.5 sq mm armoured twisted pair shielded cable in 19mm Dia FRLS PVC Conduit
500
-
65
Fire Portion
-
-
-
Pumps and Equipments
-
-
-
Providing ,fixing , testing and commissioning of electrical motor driven monoblock booster pump of horizontal centrifugal end suction back pull out type with gland packing and capable to deliver 900 LPM at 35 MWC.the pump shall be coupled to TEFC motor of suitable hp with speed of 2900 rpm and complete set shall mounted on common base frame. The quoted rate shall includes providing & fixing of compound gauge and suitable size of metal expansion bellows at both side of the pumps ,anti vibration pad, water re-circulation arrangement, pressure relief valve, coupling, coupling guard, foundation bolts etc, complete as per the manufactures recommendations.
1
-
96000
Providing, fixing ,testing and commissioning of compartmentalized common control panel . All the components shall be housed in a common cubical made of 16 SWG. M.S. sheet with required stiffeners). The panel shall be powder coated of approved color both inside & outside. The panel shall have both bottom & top cable entry provisions and panel shall be mounted on Pedestal of 300 mm height.
Incoming Feeder
a. 2 nos. 63 Amps TPN MCCB (50 KA) and shall be motor operated type b. 2 Sets of 63 Amps. TPN Al. Bus bars with color coded heat shrinkable PVC sleeves.
c. 1 Set of RYB indicating lamps with individual MCB.
d. 1 No 0-63 Amps. Ammeter with selector switch and suitable rated current transformers.
e. 1 No. 0 - 63V. Voltmeter with selector switch
1
-
35000
Outgoing
-
-
-
Feeder For BOOSTER Pump - 1 Nos a. 1 Nos. 63A TP MCCB without releases
b. DOL with over load relay, single phase preventer and indicating lamps with ON / OFF push buttons.
c. 1 No. Auto manual selector switch
d. 2 Nos. of NO/NC contacts for extending the status to the Fire alarm panel
-
-
-
Supplying, installing ,testing and commissioning of FRLS,PVC outer sheathed, steel armored, aluminum conductor, 1100 Vgrade power cables with glands etc.The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes.The minimum size & length of the cables shall be considered as required for the complete system.
-
-
-
4 C x 16 Sqmm. Aluminum cable booster pumps
60
-
250
2 C x 2.5 Sqmm.Copper cable for Instrumentation
15
-
200
3 C x 2.5 Sqmm. Copper cable For start / stop push buttons
60
-
225
Providing ,fixing , testing and commissioning of perforated G.I.sheet cable tray with necessary angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall not exceed 500 mm.Size / length of the tray shall be suitable for laying the above mentioned cables.
-
-
-
Size 50mmX50mm
20
-
350
Providing ,fixing , testing and commissioning of G.I. Earthing strips of 50mm x 6mm thick, strip shall be run on floor / ceiling / walls, from the MCC panel to all equipments as per standard with necessary accessories as required.
60
-
150
Providing ,fixing , testing and commissioning of C.I.flanged "Y" type Strainer with SS mesh, suitable flanges, nuts, bolts, gaskets etc. complete.
-
-
-
150mm dia.
1
-
19600
Providing ,fixing , testing and commissioning of PN 10 C.I.Gate valves as per IS:14846 with rising spindle type with flanges, bolts, nuts, washers, gaskets etc.
-
-
-
150mm nominal dia
1
-
25000
Providing ,fixing , testing and commissioning of PN 16 swing check type C.I. Non-return valves as per IS:5312 with required flanges, nuts, bolts and gaskets etc. complete.
-
-
-
150 mm nominal dia
1
-
11699
Providing ,fixing , testing and commissioning of PN 16 CI butterfly valves as per BS 5155 standard slim seal lever/gear operated type with required flanges, nuts, bolts etc. complete.
-
-
-
150mm nominal dia - Lever operated
3
-
8600
Providing ,fixing , testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type.
-
-
-
15mm dia.
2
-
550
20 mm dia
2
-
950
Providing ,fixing , testing and commissioning of approved make 20mm dia. With automatic air release valve with unions and ball valve etc. complete.
1
-
3500
Providing ,fixing , testing and commissioning of Pressure switches of suitable range for pump sets with Ball valves, Fittings like unions / colors / reducers etc.
1
-
4599
Supplying, installing ,testing and commissioning of Pressure gauges of suitable range for pump sets and pipe lines for the respective floors near to the flow switches with Ball valves, siphon, Fittings like unions / colors / reducers etc. Glycerin filled pressure gauges to use on pump discharge lines.
1
-
3500
Providing ,fixing , testing and commissioning of GI Pipes confirming to IS 1239 Pt - I Heavy grade up to 150 mm & 3589,6mm thick for above 150 mm dia, with painting, suitable type of supports( fabricated by angles, channels, flats etc, with painting with fasteners), anchor fasteners, bolts nuts ( Galvanized), clamps, "U" bolts, malleable specials such as Reducers,Tees, elbows (as per IS 1239 Pt II), flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, as per drawings. The quoted rate shall also inclusive of civil work in walls and making them good with filler material and finished in cement mortar etc. complete.Vendor shall consider the 2 hr fire rated fire sealant material where the pipes are passing through the fire walls /compartments as per the IS code.
-
-
-
150mm nominal dia
55
-
1500
Hydrant System
-
-
-
Providing ,fixing , testing and commissioning of Single headed hydrant valve(Internal) as per IS 5290, made of gunmetal with 63 mm dia instantaneous out & 80 mm dia fanged inlet , Blank cap , chain and hand wheel etc complete and a) 2 lengths of 15 M long, 63mm dia RRL hose,b)1 no. Gun metal short branch pipe with nozzle,c)Hose reel drum of swinging type with 19mm dia Rubber braided hose of 36M length with ball valve and Shut off nozzle with required accessories to install the equipments etc., complete.
16
-
36000
Providing ,fixing , testing and commissioning of Fire duct Shutter fabricated out of M.S sheet and frame, door (SWG 16) and powder coated of approved red color both inside and out side. The size shall be 900mm x 1200 mm min. & fixed with 6 mm thick Glass, and key with suitable Rubber beading and Locking arrangement as per the tender drawings.
16
-
4700
Providing ,fixing , testing and commissioning of fire brigade inlet connection of 4 way with 4 nos. 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arranged on 150 mm dia. Pipe manifold and connected to wet riser main. Quoted rate shall be included with C.I. Butterfly valve, C.I. Non-return valve and M.S. cabinet of suitable size with mounting supports etc. complete.
1
-
22000
Providing ,fixing , testing and commissioning of approved make 20mm dia. With automatic air release valve with unions and ball valve etc. complete.
2
-
3500
Providing ,fixing , testing and commissioning of GI. Pipes confirming to IS 1239 Pt - I Heavy grade up to 150 mm & 3589,6mm thick for above 150 mm dia, with painting, suitable type of supports( fabricated by angles, channels, flats etc, with painting with fasteners), anchor fasteners, bolts nuts ( Galvanized), clamps, "U" bolts, malleable specials such as Reducers, Tees, elbows (as per IS 1239 Pt II), flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, as per drawings. The quoted rate shall also inclusive of civil work in walls and making them good with filler material and finished in cement mortar etc. complete.Vendor shall consider the 2 hr fire rated fire sealant material where the pipes are passing through the fire walls /compartments as per the IS code.
-
-
-
80mm nominal dia
18
-
960
150mm nominal dia
150
-
1500
Fire Extinguishers
-
-
-
Providing ,fixing , testing and commissioning of Portable Carbon-di-oxide Gas Type Fire Extinguisher 4.5 Kgs, squeeze Grip,Controllable discharge mechanism with nozzle, bend, Hose and wall mounting bracket etc.The Can is made of Seamless Clinger and External Coating done by Spray Painting.The thickness shall not less than 4.5 mm made of Sheet metal.The Fire Extinguishers shall be ISI Approved as per IS 15683:2006.Vendor shall consider the suitable signages along with the extinguishers.
8
-
4600
Providing ,fixing , testing and commissioning of Portable water Type fire extinguisher 9 Lt Capacity, Stored Pressure Type with Pressure Gauge, hose and brackets etc .The discharge Range shall be minimum of 6 mtrs.The Internal Coating of Can shall be Epoxy Powder coating and External painted with Epoxy Polyester Powder coating .The thickness shall not less than 2mm made of Sheet metal.The Fire Extinguishers shall be ISI Approved as per IS 15683:2006.Vendor shall consider the suitable signages along with the extinguishers.
4
-
2800
Providing ,fixing , testing and commissioning of Portable ABC powder type fire extinguisher 6 Kg capacity containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type, fitted with Discharge hose, brackets etc., The discharge Range shall be minimum of 4 mtrs.The Internal Coating of Can shall be Epoxy Powder coating and External painted with Epoxy Polyester Powder coating.The thickness shall not less than 1.6 mm made of Sheet metal.The Fire Extinguishers shall be ISI Approved as per IS 15683:2006.Vendor shall consider the suitable signages along with the extinguishers.
45
-
5600
Providing ,fixing , testing and commissioning of Portable FOAM type fire extinguisher 9 LIT capacity containing , Stored Pressure Type, fitted with Discharge hose, brackets etc., The discharge Range shall be minimum of 4 mtrs.The Internal Coating of Can shall be Epoxy Powder coating and External painted with Epoxy Polyester Powder coating.The thickness shall not less than 1.6 mm made of Sheet metal.The Fire Extinguishers shall be ISI Approved as per IS 15683:2006.Vendor shall consider the suitable signages along with the extinguishers.
4
-
4500
Providing ,fixing , testing and commissioning of Fire buckets round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket.The buckets hall be filled with sand.
28
-
350
Providing ,fixing , testing and commissioning of Fire bucket stand fabricated by MS angles to install 2 Nos. of buckets.
14
-
960
Signages
-
-
-
Providing ,fixing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners.
-
-
-
A sign shall read “IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE”. The lettering shall be at least 12.5 mm block letters in red and white background. Such lettering shall be properly spaced to provide good legibility. The sign shall be at least 250 mm x 300 mm, where the diagram is also incorporated in it and 62.5 mm x 250 mm where the diagram is omitted. In the latter case, the diagram sign shall be at least 200 mm x 300 mm. The sign shall be located directly above a call-button and squarely attached to the wall or partition. The top of the sign shall not be above 2 m from the floor level.
24
-
600
Fire exit signage at Each stairway and each elevator back shall be identified by an alphabetical letter. A sign indicating the letter of identification shall be posted and maintained at each elevator landing and on the side of the stairway door from which egress is to be made.The lettering on the sign shall be at least 75 mm high, of bold type and of contrasting colour from the background
24
-
600
A sign shall be posted and maintained within each stair enclosure on every floor, indicating the number of the floors.The numerals shall be of bold type and at least 75 mm high. The numerals and background shall be in contrasting colors. The sign shall be securely attached to the stair side of the door.
24
-
600
Stair Re-entry Signs sign shall be posted and maintained on each floor within each stairway and on the occupancy side of the stairway where required, indicating whether re-entry is provided into the building and the floor where such re-entry is provided.The lettering and numerals of the signs shall be at least 12.5 mm high of bold type. The lettering and background shall be of contrasting colours and the signs shall be securely attached approximately 1.5 m above the floor level.
24
-
600
Fire order board should contain the following matter on 3mm thick "Opaque" PVC foam board of computerized cut, PVC Non-reflective self adhesive vinyle painted foam board of 3' x 4'.
1. Alert the security at security room by actuating manual call point located at strategic locations.
2. Evacuate the occupants by using fire exits and emergency exits only and assemble at various assembly points.
3. If possible try to extinguish the fire by using nearest / suitable portable extinguisher or water from nearest wet riser.
4. Be calm and do not give any room from panic, walk, do not run.
5. If you encounter serious difficulty in evacuation, flat and try to attract attention of rescue team.
24
-
600
Action by security/reception upon receipt of information through fire alarm or fire detectors or by using public address system.
1. Alert the occupants by using public address system.
2. Inform fire control through any one of the following phone numbers: 101 /(local numbers)
3. Refer evacuation plan from evacuating standard people.
4. Guide the fire force, on their arrival to the seat of fire.
5. In case of the casualties, call ambulance by dialing number 108.
6. Phone : -----------------------
7. Fax : ----------------------------
1
-
1200
Civil Works
-
-
-
Providing ,fixing , testing and commissioning of PCC (1:2:4) pedestals / supports for Under ground / above ground pipes. Quoted rate shall inclusive of excavation ( if required ), chipping / chasing, shuttering, plastering ( if required) etc. complete.
2
-
4500
Providing ,fixing , testing and commissioning of Sealing of FIRE & ELECTRICAL shafts at all floor levels by using M.S. angle Iron frame around the shaft M.S. chequered plate of 6mm thick and PCC ( 100mm thick) of 1:2:4 on the plate for whole shaft area as per drawings and engineer - in - charge.
20
-
5799
Addressable Fire Detection & Alarm System
-
-
-
Providing ,fixing , testing and commissioning of Analogue addressable Fire Alarm Control panel WITH battery back up for 48 hours normal operation and 15 minutes alarm operation. The control panel, battery charger etc, power supply units shall be UL listed / EN54 approved. The panel shall be 1 loop capacity and capable to expand up to 2 loops. The panel shall have minimum of 164 character LCD display and RS 232 & 485 for networking. Also panel shall be LAN compatible with bacnett / modbus software or proprietary protocol, network adaptor etc, complete.Vendor shall consider the required power supply unit for hooters and suitable signages along with the panel.
1
-
86000
Providing ,fixing , testing and commissioning of Hooter cum Strobe rated at 90 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication.The Hooter cum Strobe shall be as per technical specification and module shall be UL listed and EN 54 approved.Vendor shall consider the suitable signages,control modules & Power supply units along with the Hooters.
24
-
3200
Providing ,fixing , testing and commissioning of Intelligent Manual pull station having an integrally mounted addressable module that monitors and reports contact status.The MCP shall be as per technical specification and module shall be of UL listed and EN54 approved .Vendor shall consider the suitable signages along with the manual call point.
24
-
2970
Providing ,fixing , testing and commissioning of Control relay module shall be capable of providing tripping of Lift machines .The Addressable control relay module shall be as per technical specification and module shall be of UL listed /EN approved .
6
-
3400
Providing ,laying , testing and commissioning of 2C x 1.5 sq.mm twisted pair armoured copper cable confirming to IS standards and specifications. The quoted rate shall inclusive of suitable saddles, hardware etc, complete
400
-
110
Providing ,fixing , testing and commissioning of PVC FRLS as per IS standards conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc.
-
-
-
20 mm dia
20
-
80
25 mm dia
20
-
90
32 mm dia
20
-
100
Two way Talk Back System
-
-
-
Providing ,fixing , testing and commissioning of 24 Zone Talk back controller made of CRCA sheet housing and rack as required. The Controller shall be micro processor based priority module , mixing amplifier, all call / call back facility with key pad, power supply unit & goose neck micro phone etc complete as per the technical specifications. The Console shall have minimum of 8 hrs battery back up and it should also work on AC single phase power. The Controller shall be as per the technical specifications.
1
-
76000
Providing ,fixing , testing and commissioning of B-class Amplifier of 180W RMS out put in rack, including necessary control wires, jocks etc. complete as per the technical specifications.
1
-
28990
Providing ,fixing , testing and commissioning of 6W two way talk back Speakers WITH talk back switch made of CRCA sheet fabricated and of wall mounted type with required junction boxes and complete fixing accessories.
24
-
1350
Providing ,laying , testing and commissioning of 2C x 1.5 sq.mm twisted pair armoured copper cable confirming to IS standards and specifications. The quoted rate shall inclusive of suitable saddles, hardware etc, complete
1500
-
120
PH Portion
-
-
-
Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete.Make : Ashirwad/ ASTRAL/ORIPLAST/SUPREME/EQUIVALENT.
-
-
-
65 mm dia
100
-
962.44
Supplying, fixing and testing Puddle flanges for inlet, outlet, vent and overflow pipes, fittings with D.I frame and cover to overhead water tank and under ground water tank complete with steps as shown on the drawings etc., complete.
1
-
186943.15
i) DI manhole frame and cover (medium duty) (weight=15 KN.) with locking facility - 8 nos
-
-
-
(ii)100mm dia - 4 nos
-
-
-
(iii)80 mm dia - 6 nos
-
-
-
(iii)65 mm dia -6 nos
-
-
-
(v) 50 mm dia -8 nos
-
-
-
(vi) 32 mm dia -6 nos
-
-
-
viI) step ladder (Aluminium ladder) -8 nos
-
-
-
Supplying, installing, testing and commissioning butterfly valves with standard lever confirming to IS 13039 with necessary connecting fittings like flanges ,nuts and bolts etc., complete. as per direction of Engineer-in-Charge. including testing the joints with required water pressure. The cost inclusive of all taxes, duties, transportation, scaffolding etc. all complete as per specification & direction of EIC. Make - Zoloto/Audco/Jainson
-
-
-
50mm dia
4
-
2743.44
65mm dia
4
-
2936.24
80 mm dia
4
-
3149.96
100 mm dia
4
-
4503.11
Supplying, installing and commissioning approved make CI /CS flanged brass `Y' strainer with necessary nuts and bolts, neoprene rubber gaskets, flanges, etc.., complete.- Make- Zoloto/Jainson
-
-
-
50 mm - CI
2
-
5623.96
65 mm - CI
2
-
8812.27
80 mm - CI
4
-
9999.33
100 mm- CI
2
-
9999.33
Supplying, fixing in position approved make CI non-return valve conforming to IS codes with conplete accessories etc., complete.- Make- Zoloto/Jainson
-
-
-
50 mm
4
-
6072.29
65 mm
4
-
8302.37
Supplying, installing, testing and commissioning approved make water level controller with alarm for the Underground Sump. The quoted rate shall include for necessary wiring in PVC conduit between the control panel, underground sump and overhead tank.(length of cable approx. 60 mts.)
7
-
3925.84
Providing ,fixing , testing and commissioning of Monoblock type Domestic Water lift pumps set 2 no’s (1 Working + 1 Standby) to OHT Centrifugal End Suction Close Couple pumps of Water Flow Rate of each pump 12 cum/hr with the head of 40 MWC adequate the casing shall be cast iron and impeller shall be Stainless steel the pump HP capacity shall be provided by manufacturer at suitable head to work on 3Ph, 50Hz, 400/440V with necessary unions, flanges, foundation bolts, RCC footing in 1:2:4 etc. complete. Vendor shall consider he electrical control panel comprising of all accessories such as MCB ,isolation valve,non return valve, pressure switches, pressure transducers, control wiring & End terminations , earth strip of GI 25 x 3 mm,cable tray and any other necessary imports etc. complete. water supply ( GRUNDFOS)
-
-
-
1 Working + 1 Stand-by) - Cap :12 Cum/hr @ 40 MWC
Pressure switch- 2 nos
Pressure guage - 2nos
Control panel- 1 nos
Control cable as per OEM- 40 Rmt
Cable tray- 40 Rmt
3
-
262988.87
Providing and fixing water meter with direct reading dial in KL with all integral parts of gun metal or brass with necessary fitting such as threaded pieces, unions pressure gauge and isolation cock, flanges piece for future removal, flanges/unions complete.
2
-
8016.39
Labour for drilling a perfectly vertical bore hole for a specified dia for a specified depth below G.L through consolidated and un-consolidated rocks with down the hole hammer drilling rig or combination drilling rig (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of EIC including use of own rigs with its accessories, T&P & consumables etc. for lowering of 200mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/ PVC casing pipes, if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the Tube Well).
-
-
-
Labour for drilling of 200mm dia & 150mm dia bore from '0' mtr. to '200' mtr.
200
-
622.6
Providing & lowering the following size PVC pipes (ASTM) with or without slotted pipes as per the necessity from 1.00m above ground level up to required depth and fitting and fixing up in perfectly vertical position, including cutting, threading pipe and slotted pipe and supplying and fixing all jointing materials, T&P etc. complete and keeping the top of the casing pipe threaded including plugging the tube well to prevent entry of foreign materials from above. The cost inclusive of pipes, fittings, labour, consumables, POL, consumables with hire & running charges of machinaries etc. as per specification & direction of EIC.
-
-
-
Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as per ASTM-D-1785/2004 upto required depth. (Data for E/mtr.)
200
-
729.9
Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment , labour, all consumables, running & hire charges of machinaries etc. all complete as per the direction of the EIC. (By DTH/ Rotary)
2
-
4441.3
Supplying all materials, labour & tools and plant and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3mtrs below ground level to plug the bore hole including cost of cement all complete as per specification & direction of the Engineer-in-Charge.
-
-
-
Sanitary sealing up to 3 Mtr. below ground level.
2
-
2117
(200 mm (8”) PVC Pipe)ASTM as per EPM Rate.
200
-
727.7
Providing, fitting & fixing of 500mm dia pre-cast factory made man hole cover with frame. (Medium Duty)
2
-
4471
Supply installing testing & commisssioning of submersible type bore well motor pump of suitable hp multistage pump include of suitable size of isolation valve ,NRV etc and required length of cable with bore well starter & outer box metal type with box wiring, plwood sheets, indicator, Bolts, Cutouts, Amps metre, Volts metre, Preventer,Autostart unit 3 way, 5way, Relay, Wires etc Complete . The qouted rate also inclussive of maintanace chamber with heavey duty cover as required. . Make - Kirloskar, Wilo,Grandfous
Pressure switch-1 nos
Pressure guage - 1 nos
Control panel- 1 nos
Control cable as per OEM- Rmt- 50
1
-
181570.43
Supply installing testing & commisssioning of 50 mm dia HDPE PN 12.5 Guage pipe with fittings etc complete .
400
-
491.7
Construction of maintanance chamber with 230mm best quality approved Table Moulded bricks in CM 1:4 over a bed of 100mm thick PCC 1:4:8, internal walls plastered in 'CM 1:3 and external wall with CM 1:3 with sponge finish, benching and channelling in PCC 1:4:8. Supplying and fixing cover of size 800mmx900mmx600mm height. (weight 110 'Kgs.) The quoted rate shall also include necessary excavation and back filling etc., complete.
2
-
17310
Providing all materials, labour, T&P for laying of following dia CPVC pipes S.D.R - 13.5 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor with holder bat clamps screw etc. including testing the joints with required water presure.The cost inclusive of all taxes,duties,transportation scaffolding etc. as per specification and direction of Engineer-in-charge. Hot water and inside the toilet - Make - Ashirwad, Astral,Supreme
-
-
-
20mm diameter
-
-
-
Ground floor
110
-
189.8
1st Floor
120
-
194.8
2nd Floor
120
-
200.39
3rd Floor
120
-
206.5
4th Floor
120
-
213.22
5th Floor
120
-
220.21
6th Floor
120
-
228.74
7th Floor
120
-
237.69
25mm diameter
-
-
-
Ground floor
125
-
260.5
1st Floor
20
-
265.5
2nd Floor
20
-
271.1
3rd Floor
20
-
277.21
4th Floor
20
-
283.93
5th Floor
20
-
291.32
6th Floor
20
-
299.45
7th Floor
20
-
308.39
32mm diameter
-
-
-
Ground floor
15
-
372
1st Floor
5
-
377
2nd Floor
5
-
382.57
3rd Floor
5
-
388.68
4th Floor
5
-
395.4
5th Floor
5
-
402.79
6th Floor
5
-
410.92
7th Floor
5
-
419.86
Providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-40) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. Make - Ashirwad, Astral,Supreme
-
-
-
20mm diameter
-
-
-
Ground floor
6
-
249.9
4th Floor
3
-
207.58
5th Floor
3
-
214.97
25mm diameter
-
-
-
Ground floor
9
-
184.1
1st Floor
9
-
254.9
4th Floor
15
-
273.33
5th Floor
3
-
280.7
6th Floor
3
-
288.85
32mm diameter
-
-
-
Ground floor
3
-
311.6
1st Floor
6
-
316.7
2nd Floor
9
-
322.21
3rd Floor
9
-
328.3
4th Floor
6
-
335
5th Floor
9
-
352.4
6th Floor
9
-
350.5
7th Floor
3
-
359.4
Terrace floor
2
-
369.2
40mm diameter
-
-
-
Ground floor
3
-
351.4
1st Floor
3
-
356.4
2nd Floor
6
-
362
5th Floor
9
-
382.22
7th Floor
6
-
399.29
Terrace floor
2
-
409.13
50mm diameter
-
-
-
1st Floor
6
-
397.5
2nd Floor
9
-
403.1
3rd Floor
6
-
409.21
5th Floor
3
-
423.32
6th Floor
12
-
431.45
7th Floor
12
-
440.39
Terrace floor
3
-
450.2
65mm diameter
-
-
-
3rd Floor
6
-
599.7
7th Floor
3
-
630.9
Terrace floor
2
-
415.93
80mm diameter
-
-
-
Terrace floor
245
-
740.2
100mm diameter
-
-
-
Terrace floor
245
-
1070.4
Providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. Make - Ashirwad, Astral,Supreme
-
-
-
65mm dia pipe
-
-
-
Ground floor
6
-
964
1st Floor
6
-
969
2nd Floor
6
-
974.6
3rd Floor
6
-
980.7
4th Floor
6
-
987.43
5th Floor
6
-
994.8
6th Floor
6
-
1002.95
7th Floor
6
-
1011.9
Terrace floor
60
-
1021.7
Providing all material, labour,T&P for fitting & fixing of following water supply fittings of Brass Ball Valve with jointing materials etc. including testing the joints with required water pressure. The cost inclusive of all taxes, duties, transportation, scaffolding etc. all complete as per specification & direction of EIC. Make - Zoloto, Jainsons
-
-
-
50mm dia brass ball valve
6
-
3199.8
32mm dia brass ball valve
12
-
1554
25mm dia brass ball valve
57
-
927.9
20mm dia brass ball valve
9
-
613.2
Supplying, installing, testing and commissioning butterfly valves with standard lever confirming to IS 13039 with necessary connecting fittings like flanges ,nuts and bolts etc., complete. as per direction of Engineer-in-Charge. including testing the joints with required water pressure. The cost inclusive of all taxes, duties, transportation, scaffolding etc. all complete as per specification & direction of EIC. Make - Zoloto, Jainsons
-
-
-
65mm dia
6
-
2937.34
80mm dia
4
-
1169.53
100mm dia
4
-
4504.2
Cutting grooves in pucca floors and walls for taking GI/PVC pipes & making good the damages as per specification complete.
1140
-
128.7
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of Engineer-in-charge.
130
-
36
Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china water closet (European pattern Coupled Closets) with solid seat cover ,control plate & Cistern with Lid of standard quality approved make including supply of sutaible for EWC bolt & clamp including cost of all taxes and conveyance as per specification all complete as per direction of Engineer-in-charge.
115
-
15539.89
JAGUAR- CNS-CHR-963SSP - EWC
-
-
-
JCS-WHT-2400- CISTERN
-
-
-
JCP-CHR-292415 - CONTROL PLATE
-
-
-
Providing all materials and labour for fitting and fixing of following size white glazed vitreous china wash hand basin of approved make with supply & fixing of basin bolts & screw,32mm PVC waste pipe of approved quality including cutting the walls & floor and making good the damages with cement concrete (1:2:4) etc. with all taxes, duties, transportation etc. all complete as per direction of EIC.
116
-
4810.6
JAGUAR- OPS-WHT-15305- basin
-
-
-
Jaquar - ALD-CHR-769L250X190 -trap
-
-
-
JAGUAR- ALD-CHR-709 - waste coupling
-
-
-
Providing all materials , labour ,T&P and fittings and fixing of different water supply (CP on Brass) fitting as per IS specification & approved make of following sizes and specification with leak proof threaded joints with threadseal tape or any other method as required, including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in-charge. Make : Hindware/Jaquar.
-
-
-
15mm dia CP Bib cock (short body)with wall flange
21
-
902.3
JAGUAR- CON-CHR-037KN
-
-
-
15mm dia CP Angle stop cock with wall flange
315
-
1050
JAGUAR- CON-CHR-053KN
-
-
-
15mm C.P.Pillar Cock
3
-
1852.2
JAGUAR-FLR-CHR- 5031NG
-
-
-
CP Soap dish
57
-
1394.5
JAGUAR-ACN-CHR-1131N
-
-
-
CP square Towel Ring
22
-
1050
JAGUAR-ACN-CHR-1121N
-
-
-
Hand shower (Health Faucet),flexble tube&wall Bracket
115
-
1483.1
JAGUAR- ADL-CHR-573GA
-
-
-
CP Toilet Paper Holder
115
-
646.4
JAGUAR- ACN-CHR-1151N
-
-
-
Shower head
86
-
1532.3
JAGUAR-OHS-CHR1989GA
-
-
-
Shower head arm
86
-
902.3
JAGUAR-SHA-CHR-477
-
-
-
CP 20mm dia x 610mm long towel rod
13
-
1173
JAGUAR- ACN-CHR- 1111SM
-
-
-
15mm dia steel braided connection pipe
313
-
306.8
JAGUAR- ALD-805B
-
-
-
Sink Cock
11
-
3993.1
JAGUAR-FLR-CHR- 5166GD
-
-
-
Two way 15mm dia CP Bib cock (short body)with wall flange
4
-
1886.6
JAGUAR- FUS-CHR-29041
-
-
-
Supplying, Installing, testing and commissioning stainless 'steel sink with single bowl without drain board 'manufactured from 1mm thick stainless steel, 18G 'grade indestructible chrome nickel steel with top quality 'polish, 1no.40mm dia CP waste coupling, with 1 no. 40mm 'dia CP bottle trap with extension pipe, 15mm dia CP sink 'cock with swivel spout wall mounted type and necessary 'wall flanges etc., complete. Size : 610x510mm ( 4 LPM @ 3 bar ) Make - Nirali
11
-
4992.3
Providing all materials , labour ,T&P and fittings and fixing of Following Size on Extension piece (S.S/CP on Brass) approved make of following sizes and specification with leak proof threaded joints with spun yarn and white zinc or any other method as required including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in-charge.
-
-
-
15mmx65mm C.P./S.S Extension piece
12
-
45.5
Providing all materials, labour & fitting and fixing 100mm PVC multi floor trap with cement mortar (1:4) with all taxes, duties etc. all complete as per specification & direction of Engineer-in-charge. Make - Ashirwad, Astral, Supreme
-
-
-
100mm PVC multi floor trap
250
-
257.7
Providing all materials, labour, T&P for fitting and fixing of UPVC SWR pipes (Type-B) confirming to IS-13592/1992 with latest revision & ISI mark both below & above ground level or fixing on wall surface upto 7th floor roof including scaffolding wherever necessary with requisite testing. The cost inclusive of all taxes, transportation, loading & unloading etc. all complete as per specification & direction of the Engineer-in-charge. Make : Ashirwad/ ASTRAL/ORIPLAST/SUPREME/EQUIVALENT.
-
-
-
75mm diameter
-
-
-
Ground floor
238
-
374.7
1st Floor
103
-
377.6
2nd Floor
100
-
380.8
3rd Floor
100
-
384.3
4th Floor
100
-
388.19
5th Floor
100
-
392.4
6th Floor
100
-
397.12
7th Floor
100
-
402.3
110mm diameter
-
-
-
Ground floor
65
-
67.26
1st Floor
72
-
70.2
2nd Floor
72
-
73.36
3rd Floor
72
-
76.9
4th Floor
72
-
80.74
5th Floor
72
-
85
6th Floor
72
-
89.68
7th Floor
72
-
94.8
Terrace Floor
1
-
100.5
160mm diameter
-
-
-
Ground floor
25
-
199
1st Floor
25
-
5.08
2nd Floor
25
-
2730
3rd Floor
25
-
3576.45
5th Floor
25
-
6.96
6th Floor
25
-
427.43
7th Floor
25
-
199
Terrace Floor
3
-
3.61
Providing all materials, labour, T&P for fitting and fixing of UPVC SWR pipes (Type-A) confirming to IS-13592/1992 with latest revision & ISI mark both below & above ground level or fixing on wall surface upto 7th floor roof including scaffolding wherever necessary with requisite testing. The cost inclusive of all taxes, transportation, loading & unloading etc. all complete as per specification & direction of the Engineer-in-charge. Make : Ashirwad/ ASTRAL/ORIPLAST/SUPREME/EQUIVALENT.
-
-
-
75mm diameter
-
-
-
Ground floor
13
-
246.9
1st Floor
13
-
249.8
2nd Floor
13
-
253
3rd Floor
13
-
256.5
4th Floor
13
-
260.39
5th Floor
13
-
264.6
6th Floor
13
-
269.32
7th Floor
13
-
274.5
Providing all materials, labour, T&P, fitting and fixing of following dia UPVC SWR fittings of approved make confirming to IS 14735/1992 with ISI mark both below & above ground level or fixing on wall surface upto 7th floor roof including scaffolding wherever necessary with requisite testing. The cost inclusive of all taxes, transportation, loading & unloading etc. all complete as per specification & direction of the Engineer-in-charge. Make : Ashirwad/ ASTRAL/ORIPLAST/SUPREME/EQUIVALENT.
-
-
-
110mm S Trap
106
-
734.1
110mm P Trap
115
-
513.4
110mm Cross Tee
23
-
361.2
110mm Single Tee with door
22
-
427.4
110mm Single Tee Plain
22
-
364.7
110mm Plain Bend
52
-
234.6
110mm Door Bend
12
-
291.5
110mm Vent Cowl
4
-
99.9
PVC clamp suitable for 110mm dia pipe
32
-
84.8
110x75 Reducing Y without door
11
-
386.8
75mm Cross Tee
22
-
272.9
75mm Single Tee Plain
13
-
204.4
75mm Plain Bend
11
-
185.8
75mm Door Bend
6
-
224.2
75mm Vent Cowl
1
-
74.3
PVC clamp suitable for 75mm dia pipe
2
-
76.7
75 mm End cap
2
-
109.2
110 mm End cap
7
-
142.9
160 mm end cap
5
-
44.1
160mm Cross Tee
5
-
475
160mm Single Tee with door
5
-
910.6
160mm Single Tee Plain
5
-
866.5
160mm Plain Bend
5
-
512.2
160mm Door Bend
5
-
512.2
160mm Vent Cowl
5
-
4030
PVC clamp suitable for 160mm dia pipe
6
-
126.6
75 mm threaded cleanout plug
32
-
162.6
110 mm threaded cleanout plug
32
-
311.28
160 mm threaded cleanout plug
30
-
478.5
Providing all materials, labour, T&P for fitting and fixing of UPVC 6 kg/cm2 pressure pipes IS4985 for waste connection from wash basin,kitchen sinks with latest revision & ISI mark both below & above ground level or fixing on wall surface upto 7th floor roof including scaffolding wherever necessary with requisite testing. The cost inclusive of all taxes, transportation, loading & unloading etc. all complete as per specification & direction of the Engineer-in-charge. Make : Ashirwad/ ASTRAL/ORIPLAST/SUPREME/EQUIVALENT.
-
-
-
40mm dia UPVC pressure pipe
-
-
-
Ground floor
55
-
510.42
1st Floor
20
-
519.9
2nd Floor
20
-
530.32
3rd Floor
20
-
541.8
4th Floor
20
-
554.4
5th Floor
20
-
568.3
6th Floor
20
-
583.54
7th Floor
20
-
600.3
50mm dia UPVC pressure pipe
-
-
-
Ground floor
12
-
709.04
Supplying, fixing and testing PVC rain water collection kurra with leaf trap grating made out of UPVC with flange complete.(Roof Corner Outlet Pasted Type Fitting)Make - Ashirwad, Astral, Supreme
-
-
-
160 mm kurra
8
-
2706.3
75 mm kurra
2
-
1169.63
Cement Concrete (1:4:8) for Terrace pipes pedastal
5
-
3509.6
Fixing 600x450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with Chromium Plated brass screws and washers complete as per specification and direction of the Engineer in charge
22
-
723.4
Providing & Fixing stone slab with Table rubbed, edges rounded and polished of size 75x50 cm deep and 18mm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 as per direction of Er-in-charge.
15
-
1344.1
Providing all materials, labour, T&P for fitting and fixing of UPVC 6 kg/cm2 pressure pipes IS4985 for waste connection with latest revision & ISI mark both below & above ground level or fixing on wall surface upto 2nd floor roof including scaffolding wherever necessary with requisite testing. The cost inclusive of all taxes, transportation, loading & unloading etc. all complete as per specification & direction of the Engineer-in-charge. Make : Ashirwad/ ASTRAL/ORIPLAST/SUPREME/EQUIVALENT.
-
-
-
280 mm dia
40
-
958.55
200 mm dia
40
-
794.58
160 mm dia
110
-
641.59
110 mm dia
80
-
374.13
Providing all materials, labour, T&P required for construction of RCC M-25 man hole chamber of following sizes having cube strength 250 Kg/cm2 at 28 days confirming to IS-456/2000 & IS-3370 at all locations & height using h.g. stone aggregate (Crusher broken) of 20mm & down size including machine mixing, lifting, hoisting, conveying, placing in position, mechanical consolidation, curing, de-watering (if required). The minimum thickness of RCC base slab, all side walls & roof slab shall be not less than 150mm & 125mm (avg.) respectively. The cost shall be inclusive of rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel/ ply centering materials with all bracing, ties, anchorage & supports and removing the same after required paid & placing M.S.Reinforcement HYSD bar of required dia including cutting, bending, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires (18 to 20 gauge soft drawn & cold annealed).
-
-
-
PCC 1:3:6 with 40mm size h.g.c.b. metal of 100mm thick, moulding & shaping the channel & benching with C.C. 1:2:4 with 12mm size h.g.c.b. chips, 12mm thick cement plaster 1:3 with cement punning on inner wall surface, earth work excavation in all types of soil/rock including cement concrete cutting as per site condition, filling the foundation base with sand duly watered & rammed, providing, fitting & fixing of pre-cast factory made man hole cover with frame (SFRC medium duty) for clear opening 500mm dia, providing, fitting & fixing of poly propylene steel reinforced man hole steps of approved quality & size in two parallel line of 300mm spacing in vertical wall with centre to centre 375mm (staggered) etc.all complete as per specification & direction of EIC.
-
-
-
Manhole chamber of Inner size 900mmx1200mmx 900mm depth.
-
-
-
Extra for every additional depth of 0.10mtr. or part there of manhole size 900mmx1200mm from 900mm depth upto 2500mm depth.
-
-
-
Manhole chamber of Inner size 900mmx900mmx depth upto 1500 mm
10
-
17310
Manhole chamber of Inner size 600mmx600mm with heavy duty cover
17
-
16728
Manhole chamber of Inner size450mmx450mmx depth upto 1500 with heavy duty proforated cover
15
-
5343
Providing all materials, labour, T&P required for construction of RCC M-25 man rain water chamber of following sizes having cube strength 250 Kg/cm2 at 28 days confirming to IS-456/2000 & IS-3370 at all locations & height using h.g. stone aggregate (Crusher broken) of 20mm & down size including machine mixing, lifting, hoisting, conveying, placing in position, mechanical consolidation, curing, de-watering (if required). The minimum thickness of RCC base slab, all side walls & roof slab shall be not less than 150mm & 125mm (avg.) respectively. The cost shall be inclusive of rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel/ ply centering materials with all bracing, ties, anchorage & supports and removing the same after required paid & placing M.S.Reinforcement HYSD bar of required dia including cutting, bending, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires (18 to 20 gauge soft drawn & cold annealed).
-
-
-
PCC 1:3:6 with 40mm size h.g.c.b. metal of 100mm thick, moulding & shaping the channel & benching with C.C. 1:2:4 with 12mm size h.g.c.b. chips, 12mm thick cement plaster 1:3 with cement punning on inner wall surface, earth work excavation in all types of soil/rock including cement concrete cutting as per site condition, filling the foundation base with sand duly watered & rammed, providing, fitting & fixing of pre-cast factory made man hole cover with frame (SFRC medium duty) for clear opening 500mm dia, providing, fitting & fixing of poly propylene steel reinforced man hole steps of approved quality & size in two parallel line of 300mm spacing in vertical wall with centre to centre 375mm (staggered) etc.all complete as per specification & direction of EIC.
-
-
-
Tank size 3x1.5 m uto 3.5 mtr depth
4
-
25944
Labour for drilling a perfectly vertical bore hole for a specified dia for a specified depth below G.L through consolidated and un-consolidated rocks with down the hole hammer drilling rig or combination drilling rig (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of EIC including use of own rigs with its accessories, T&P & consumables etc. for lowering of 200mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/ PVC casing pipes, if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the Tube Well).
120
-
622.6
Providing & lowering the following size PVC pipes (ASTM) with or without slotted pipes as per the necessity from 1.00m above ground level up to required depth and fitting and fixing up in perfectly vertical position, including cutting, threading pipe and slotted pipe and supplying and fixing all jointing materials, T&P etc. complete and keeping the top of the casing pipe threaded including plugging the tube well to prevent entry of foreign materials from above. The cost inclusive of pipes, fittings, labour, consumables, POL, consumables with hire & running charges of machinaries etc. as per specification & direction of EIC.
-
-
-
Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as per ASTM-D-1785/2004 upto required depth. (Data for E/mtr.)
120
-
1075.9
Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment , labour, all consumables, running & hire charges of machinaries etc. all complete as per the direction of the EIC. (By DTH/ Rotary)
4
-
4441.3
Supplying all materials, labour & tools and plant and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3mtrs below ground level to plug the bore hole including cost of cement all complete as per specification & direction of the Engineer-in-Charge.
-
-
-
Sanitary sealing up to 3 Mtr. below ground level.
6
-
2117
(200 mm (8”) PVC Pipe)ASTM as per EPM Rate.
125
-
942.6
Providing, fitting & fixing of 500mm dia pre-cast factory made man hole cover with frame. (Heavy Duty)
8
-
4471
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. DSR 23.5
5
-
921.9
23.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. DSR 23.6
5
-
1038.05
23.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer,for all leads & lifts, all complete as per direction of Engineer -incharge. DSR 23.7
5
-
1038.05
Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. DSR 23.8
5
-
1175.6
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin-
charge.DSR 23.9
4
-
959.35
Providing all material, labour, T&P and construction of Gully Trap chamber of size as mentioned below with 250mm nominal size Fly Ash Brick having crushing strength not less than 75kg/sqcm in CM 1:4 over a bed of 100mm thick C.C. (1:3:6) using 40mm size HG metal, plastering with 12mm thick cement plaster with cement punning in cement mortar 1:4 on inner surface and 12mm thick cement plaster in cement mortar (1:4) on external surface,fitting & fixing of PVC Gully Trap and pre-cast factory made (SFRC) cover with frame of opening size 300mmx300mm, moulding and shaping the channel & benching with C.C (1:2:4) with hard granite chips 12mm size, earth work excavation in all kinds of soil & rock and filling the cavity of the chamber with excavated & selected earth levelling the surface around the chamber with disposal of surplus earth within 50m. lead as per specification, design & drawing including cost of curing and all taxes, royalty, cost, conveyance etc. all complete as per specification & direction of EIC.
24
-
19546
Earth work :
-
-
-
Earth work in hard soil within 50m initial lead & 1.5m initial lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department.
-
-
-
Upto 1.50m initial lift
360
-
91.4
Earth work in stoney earth & gravels mixed with stone boulders not exceeding 0.014 cum in volume within 50m initial lead & 1.50m lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department.
-
-
-
Upto 1.50m initial lift
6
-
142.5
Excavation of foundation in laterite rock or any hard rock (other than granite or disintegrated rock) removed by chiselling including dressing & levelling & benching the bed not exceeding 1.50m depth & depositing the soil within initial lead of 50m & as per specification approved by the department.
-
-
-
Upto 1.50m initial lift
6
-
662.5
Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
370
-
50.8
Providing all materials,labour,T&P for construction of following size Cement Concrete (1:2:4) Pedestal with 12mm size h.g.c.b. chips, PCC 1:3:6 with 40mm size h.g.c.b. metal, Centering & Shuttering etc. as per approved design & drawing for RCC pipe. The cost inclusive of all taxes, royality, hire & running charges of all machineries, Transportation charges with all consumables etc. all complete as per specification & direction of EIC.
-
-
-
Cement Concrete Pedestal of size 600mmx250mmx450mm ht. for 200 -350 mm dia RCC pipe
30
-
685
Lift
-
-
-
Design, manufacturing, supply, installation testing and commissioning of 10 Passenger Elevator, 8 stops with machine room as per (G+7) lift with ARD make OTIS / Johnson / Mitusbis / Thyssenkrupp / KONE with provision of automatic ACVVVF door operation and multiray electric door detective system, cabin fan, car pannels, made out of stainless steel, car enclosure & Alluminium plate flooring etc. as per drawing and approved specification (detail specification attached in DTCN) and direction of the Engineer-in-chrage. The lift should confirm to relevant I.S. specifications such as I.S. 1860-1980, IS3534-1947, IS 6383-1971, IS 6620-1972 & other relevant IS.
6
-
2500000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements