Rural Water Supply And Sanitation Department Tender

90 mm dia O.D. HDPE. Pipe (Including pipe cost) PE80, PN-08

110 mm dia O.D. HDPE. Pipe (Including pipe cost) PE80, PN-08

Supplying all labour, T&P for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of Engineer-in-charge.

Supplying all labour and T&P for cutting cement concrete road for taking pipe line etc., complete and as per direction of Engineer-in-charge.

Supplying all materials, labour T&P for making good to the damages of cutting of cement concrete road for taking pipe line with 40 mm size crusher broken metal concrete etc., CC (1:4:8) of thickness 0.10 Mtr and top 12 mm size crusher broken chip;s concrete CC(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of Engineer-in-charge

Supplying all materials, labour and T&P for fixing of following sizes of C.I. SLUICE / NON RETURN VALVES with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete.

80 mm dia S.V.

Supplying of all labour,T&P,material including taxes for construction of RCC M-20 valve chambersfor SV/NRV of inside size 0.9x0.9x1.2m & wall thickness 0.15m confirming to approved drawing, design & specification etc. complete as per direction of the Engineer - in Charge.

Supplying all materials, labour and T&P for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (Tata / Zindal make) confirming to IS 1239(P.1)2004/IS:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of Engineer-in-charge to be used to cross drainage work including jointing with rubber insertion, nut and bolts, clamp making and fixing if required and providing necessary masonary support as per site condition and jointing to the water mains and providing scaffoldings.

80 mm dia G.I. ( medium ) pipe

80mm dia x 900 G.I Bend D/F of size (0.30 x 0.30)m

80 mm dia G.I Flange

cutting of G.I Pipe

Welding of G.I Pipe

WSupplying all materials, labour and T&P for construction of bore well platform all round the production well such as earth work excavation in all kinds of soil R.R. stone masonary in (1:6) C.M., 20 mm cement plaster in C.M. (1:6) over RR stone masonary work, RCC cover plate with M-20 etc., all complete and as per direction of Engineer-in charge.

PUMPING UNIT INSTALLATION

Supplying , Testing , Installation and Commissiong of -- suirtable Vertical Submerssible Pump SET with Energy Efficient Motor Certified by Bureau of Energy Effciency (GOI) of Reputed make, ISI / ISO Certified to run in Three Phase A/C Supply, Capable to Discharge Clear Water from Production Well of 200mm X 150mm DIA along with suitable Control Panel Board of Reputed make (BCH, L&T, HAVELLS etc.) with ISI / ISO Certified, 3 Core Flat Submerssible Cable of Reputed Make (BCH, PHINOLEX etc.) with ISI / ISO Certified , Armored Cable with ISI / ISO Certified , BIS certfied

Suitable Vertical submersible pumping set with outer dia 100mm with energy efficient motor Certified by Bureau of Energy efficiency (GOI) of reputed make, ISI/ ISO Certified to run in three phase a/c supply, capable to discharge clear water as detaied below from production well (200mm x 150mm) dia.includes 3.0mtr lenght Submerssible flat cable & cable joint kit .

At 2.00 lps against head of 72 meter

Suitable control panel board of reputed make with ISI/ ISO Certified (BCH, L&T, Havells, etc) for the above Pump Set vide Sl. No. – 1 a, b, c, should be of three phase consisting C.R.C.A sheet with colour coating both side of the box and proper locking system, contactor, volt meter, ampere meter along with single phase preventer and weather proof auto manual switch, volt meter with selector switch including light ON & OFF switch for the above work with 3 Phase indicator Lamps. (The control Panel for 5HP pump set and above should be of star delta model only.)

D.O.L.Control panel for Pump of below 5 H.P.

4mm2 3core flat submersible cable of reputed make with ISI/ ISO certified (BCH, Finolex, etc.)

50 mm OD ISI marked, High Density Polyethylene (HDPE) pipes for water supply as per IS No. 4984/1995 (Reaffirmed 2002) with amendment no. 1,2,3,4 & 5 PE 80 grades of materials, and pressure rating of PN 08

Supplying, Fitting of 200mm dia M.S/C.I. Bore cover, 2set Suitable M.S Bore Clamp, with required accessories like G.I R/S fittings for jointing to water mains, stainless steel nipples suitable to HDPE Pipe, G.I.bend, and nutbolts, and other tit bit items including jointing of cable etc required for connection to the rising main including lowering of pump set

For new supplys in New Schemes from new Distribution lines Providing House hold connection with supply & fitting fixing of all necessary pipes and fittings from supply main pipe line to water point post such as PVC fabricated Saddle confirming to IS:10299-1982, G.M. ferrule Cock (IS:2692-1978) , GI fittings (15mm dia GI Socket-2, 15mm diaX100mm long GI nipple-2, 20mmx15mm GI R Elbow-1, 20mm dia G.I elbow, Nipple-1, 15 mm dia PVC bibcock(Best Quality), Making of Concrete Block of Size (0.785x0.11x0.11x0.6m3 around 20mm dia GI stand pipe, 110mm dia PVC (Non-Presuure Pipe around Stand point to contain concrete, Cutting holes through existing brick work including making good to same in CM (1:4) for taking GI/PVC pipes & fittingsincluding 20mm HDPE of 0.9 mtr & its laying but excluding Earthwork excavation and refilling of excavated material and as per site requirement all complete and as per the direction of Engineer-in-charge. (As per letter No.2770 dated.03.02.2020 of PR. & DW, GoO)

For supplys in old Schemes from existing old Distribution lines Providing House hold connection with supply & fitting fixing of all necessary pipes and fittings from supply main pipe line to water point post such as PVC fabricated Saddle confirming to IS:10299-1982, G.M. ferrule Cock (IS:2692-1978) , GI fittings (15mm dia GI Socket-2, 15mm diaX100mm long GI nipple-2, 20mmx15mm GI R Elbow-1, 20mm dia G.I elbow, Nipple-1, 15 mm dia PVC bibcock(Best Quality), Making of Concrete Block of Size (0.785x0.11x0.11x0.6m3 around 20mm dia GI stand pipe, 110mm dia PVC (Non-Presuure Pipe around Stand point to contain concrete, Cutting holes through existing brick work including making good to same in CM (1:4) for taking GI/PVC pipes & fittingsincluding 20mm HDPE of 0.9 mtr & its laying including Earthwork excavation (1cum) and refilling of excavated material and as per site requirement all complete and as per the direction of Engineer-in-charge. (As per letter No.2770 dated.03.02.2020 of PR. & DW, GoO)

Service connection Supplying all materials, labour, T&P for laying, fitting and fixing of 20 mm dia HDPE pipe of PE 80 Grade and pressure rating PN 10.0 for Service connection Supplying all materials, labour, T&P for laying, fitting and fixing of 20 mm dia HDPE pipe of PE 80 Grade and pressure rating PN 10.0 for connection of individual house connection confirming to IS 4984& 4985/2016(10kgf/cm2), including earth work excavation (1mX0.3mX0.45m), refilling of the trenches, laying of pipe line, cost of all materials such as pipes and fittings etc. all complete and as per site requirement and as per the direction of Engineer-in-charge. (@ 6 mtr for each house) (As per letter No.2770 dated.03.02.2020 of PR. & DW, GoO)

CC Road Crossing (For the required houses opposite to the main pipe line) Supplying all labour and T&P for cutting cement concrete road for taking pipe line and making good to the damages with 12 mm size crusher broken chips concrete CC(1:2:4) including all cost, conveyance, royality of materials including watering, curing and ramming etc. including cost of 20mm HDPE pipe(PE-80, PN-10) & laying of pipe (3.75mtr) confirming to IS 4984& 4985/2016(10kgf/cm2), all complete and as per specification and direction of Engineer-in-charge. (using Cutter) (As per letter No.2770 dated.03.02.2020 of PR. & DW, GoO)

Documentation charges for photographs at different stage of work.