Rural Development Department Tender

Supplying & laying of heavy duty factory made hydraulically prsses and mechanically compacted precast interlocking approved brand pavers of 80mm thick coral shaped on preparation of sub base with 200mm sand & levelling laying of of interlocking paver block with sand binding & final compaction with plate with all cost, conveyance, taxes etc. complete the work in all respect as per direction of the Engineer-in-charge

Providing cement concrete ( 1:3:6 )mix with 40mm nominal size C.B stone aggregate in foundations upto a depth of 1.50m. Below ground level and upto a height of 1.50m. above ground level/ bed level including cost and conveyance of all materials to site . complete as per direction of the Engineer in charge

Construction of granular sub-base by providing close grade granular sub-base grading-III material as per table-100-1 spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density complete as per clause 401 of MOSRT&H Specifications for Road & Bridges work 4th Revision with all cost conveyance taxes royalities with all labour and T and P etc complete in all respect as per direction of the Engineer in charge

Providing, laying spreading compacting stone aggregate of WBM rolling with PRR including hire and running charges of PRR to proper grade and camber, applying brooming requisite type of screening/binding materials to fill up the interstices with moorum watering and compacting with all cost, conveyance, taxes, royalities with all labour and T&P etc.complete in all respect as per direction of the Engineer-in-charge. WBM-Gr-II

WBM Gr-III

Providing and labour applying tack coat with penetration grade of bitumen emolation including all cost, conveyance, taxes, royalities, with all labour and T&P etc. complete with all labour and T&P in all respect as per direction of the Engineer-in-charge.

Providing & laying bituminous macadam with 100-120 TPH hot mix plant producuing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site laid over a previously prepared surface with paver finisher to the required grade level and alignment and rolled as per clause 501.6 and 501.7 to achieve the desired compaction including all cost conveyance taxes royalities with all labour and T and P required for the work etc complete as per direction of the Engineer in charge

Providing and laying semi dence bitumen carpet with 100-120 TPH hot mix plant producuing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder transported to site laid over a previously prepared surface with paver finisher to the required grade level and alignment and rolled as per clause 507 to achieve the desired compaction including all cost, conveyance taxes royalities with all labour and T and P required for the work etc complete as per direction of the Engineer in charge

Rough stone dry packing / boulder pitching in approns and revetments with hard stone ( 15cm to 30cm ) with all cost, conveyance, taxes, royalities with all labour and T&P etc. complete in all respect as per direction of the Engineer-in-charge.

Construction of embankment with approved materials obtained from borrow pit with all lift and lead transporting to site by mechanical means within a lead of 5km spreading, grading to a required slope and compacting to specification requirements as per the direction of Enigneer in charge

Providing Cement concrete ( 1:2:4 ) for plain/reinfored concrete in open foundations complte as per drawings and technical specifications clause 802,803l including cost and conveyance,taxes etc of all materials complete in all respect as per direction of the Engineer-in-charge

RCC of design mix of M-25 grade having specified characteristices compressive strength/target mean strength of 300kg/cm2 in design mix with minimum quantity of cement as specified in IRC Code of150mm cubes at 28 days curing after mixing and tests conducted in accordance with relevant clauses of IS 456/IS,516/IRC, 216/1987/IRC-78/1983 using crusher broken hard granite course aggregate of 20mm down graded sizes and proportion as specified in clause 302.6.2 of IRC 21/1987 and IS 10262 and subject to mix design in conformity with the grading and proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry and using minimum quantity of cement confirming to codal provision including hoisting lowering and laying concrete inlayers not exceeding 15cm thick compacating with vibrators watering and curing for 28days including water tite steel, centering, shuttering and form works finishing the exposed surface smooth providing beads and grooves wherever necessary including cost, conveyance, royalties and all other taxes of all materials with all leads and lifts, cost of labour and T&P and machinaries etc. required for the work

Deck slab

Dirt Wall

Construction of wearing coat CC M 30 witrh 43 grade cement compacted using needle, screed and plae vibrators and finished in continuous operation, curing of concrete slabs for 14 days curing compouind and water finishing to lines and grade with all cost, conveyance, taxes, royalities with all labour T&P etc. complete in all respect as per direction of the Engineer-in-charge.

Supplying, cutting bending binding HYSD bar or Tor steel bending binding and welding jointing if necessary and laying the grills and placing in proper position including all cost conveyance taxes Cess with all labour and T and P etc complete in all respect as per direction of the Engineer in charge

Providing weep holes in the abutment and wing wall 8.00cmx23.00cm size including metal spall backing 30cmx30cm size in rear complete as per approved design and drawing including providing centering shuttering with all cost, conveyance, royalty and taxes of all materials T&P articles etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Providing 600mm filter media in rear of abutment with all cost, conveyance, taxes, royalities with all labour and T&P etc. complete in all respect as per direction of the Engineer-in-charge.

Construction of RCC railing of M 25 grde in cast-in-setu with 20mm nominal size aggrgate with all cost, conveyance, royalty and taxes of all materials T&P articles etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Providing expnsion joint filter bod to concree joints in between Abutmnt & Wing wall with all cost, conveyance, royalty and taxes of all materials T&P articles etc. complete in all respect as per specification and direction of the Engineer-in-charge.