Odisha Tourism Development Corporation Limited Tender

Brick masonry using Fly Ash. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.

Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade including centering & shuttering as per approved designs and drawings having a minimum compressive strength (in work test) 20 N / mm2. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceed 25 % ) to be mixed in concrete mixture including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of Tor steel and binding wires and labour charges for straightening, cutting, bending binding etc. of tor steel tying the grills and placing in proper position.

Wall

Foundation

Reinforcement

Providing & laying granite in floor using 16-18mm thick granite slab of approved quality, colour and size over 20mm thick cement mortar (1:4) and finishing the joints with epoxy based water proofing grout to match the colour & shade of tiles including cutting to shape, grinding and wax polishing, cost of all labour, materials, taxes, royalties, loading and unloading, conveyance, sundries, watering etc. complete as per drawing and direction of the Engineer -in-charge.

Providing & laying granite in Skirting using 10mm thick granite slab of approved quality, colour and size over 12 thick cement mortar (1:3) and finishing the joints with epoxy based water proofing grout to match the colour & shade of tiles including cutting to shape, grinding and wax polishing, cost of all labour, materials, taxes , royalties, loading and unloading, conveyance, sundries, watering etc. complete as per drawing and direction of the Engineer -in-charge.

Supplying, fitting and fixing of stainless steel of 304 grade in hand rail using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mt c/c and stainless square pipe bacing of size 32mm x 32mm x 2mm in three rows as per approved design and specification, buffing, polishing etc with cost, conveyance,of all materials, labour T&P etc. required for the complete in all respect as per the direction of Engineer -in- charge.

Electrical Work

Supply & Laying of 10W LED Inground light

Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex/ L&T/ Anchor/ Havels /V Guard)

Providing and fixing of 63 Amp IC DP main switch

Supply and fixing of double pole and neutral, sheet steel, MCB distribution, 230 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized andpowder painted including earthing etc. as required ( But with out MCB/ RCCB/ Isolator) 4 WAY DOUBLE DOOR

Supply and fixing of Double POLE MCB

MV cable laying from upto 25 sq.mm in ground Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade ofsize not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. 2core 6 sqmm

Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required G.I. Earth Pipe electrode with salt / charcoal

Supplying and laying 8 SWG copper wires ISI marked at 0.5 meter below grond level for conductor earth electrode including soldering etc. as required