Odisha Tourism Development Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 2,05,600Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_OTDC_74905_1Bid Award Id
ViewTender No
BP -I/22/2021-22 Dt. 17.12.2021Tender Authority
Odisha Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://http://www.otdc.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead. complete in all respects as per direction of Engineer-in-Charge.
42.86
-
1098.9
Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m lead complete in all respects as per direction of Engineer-in-Charge.
42.86
-
39.34
Dismantling & removing doors,window & ventilatots including removal of frame ,hinges ,fastening & stacking the same for reuse & removing the debris within 50m lead.
2.16
-
315.6
Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead.
48.73
-
98.4
Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead.
12.24
-
51.1
Rubbing old marble chips or marble tile flooring and dados skirting including wax polishing to give granolithic finish. (As per S/R-2006, P-110, Item-3)
85.44
-
55.6
Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge
26.67
-
218.7
Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge.
8.42
-
156.9
Providing 12mm thick C.P. 1:6 finished even and smooth on masonry walls including racking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and levels and providing grooves as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, taxes, royalty, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.
28.57
-
142.9
Providing fitting, laying and fixing vitrified tile flooring using Digital eternity series tiles having thickness of 6.5mm to 6.7mm conforming to IS 13756 of 600mmx600mm special plane / printed series of approved quality of Kajaria or equivalent having base price of the tile Rs. 50 -60 / sqft in all floors on 25mm thick cement and sand mortar in ( 1:4) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing , watering and curing etc including cost conveyance taxes of all materials and cost, conveyance,taxes of all labour with T&P required etc. complete in all respects as per direction of Engineer-in-Charge.
120.96
-
918.8
Providing fitting, laying and fixing vitrified tile in dado/ skirting using Digital eternity series tiles having thickness of 6.5mm to 6.7mm conforming to IS 13756 of 600mmx600mm special plane / printed series of approved quality of Kajaria or equivalent having base price of the tile Rs. 50 -60 / sqft in all floors on 12mm thick cement and sand mortar in ( 1:3) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing , watering and curing etc including cost conveyance taxes of all materials and cost, conveyance,taxes of all labour with T&P required etc. complete in all respects as per direction of Engineer-in-Charge.
8.1
-
932.4
Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
21.6
-
1125.5
Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
2.16
-
1025.4
Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
8.28
-
2061.7
Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
5.22
-
2075.2
Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
34.8
-
237.6
Providing & Fixing tiles 30cm x 30cm/ 40cm x 40 cm special plain / printed series ceramic floor tiles of premium grade (Base price of the tile not less than Rs. 30 -50 / sqft) having thickness 7mm to 8mm confirming to IS 13755 in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.(in toilet floor area)
25.24
-
729.6
Providing & Fixing tiles of 30cm x 45 cmspecial plain/ printed series ceramic wall tiles of premium grade (Base price of the tile not less than Rs. 30 -50 / sqft) having thickness 6.5mm to 6.7mm confirming to IS 13755 in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and cleaning complete. (in toilet walls)
109.35
-
720.8
Providing and fixing in position wood plastic composite door frame including two coats of hot bitumen applied to rear of frame in contact with masonry or concrete surface fixed with MS hold fast of 40x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including panting two coats of synthetic enamel paints over a coat of primer both of approved brand and shade to exposed surface including cost, conveyance, loading, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge
31.5
-
1217
Providing and fixing of 32mm thick ISI marked factory made flush door shutters conforming to IS 2202 (Part-I) both side commercial of approved make , both faces of shutters finished with 1mm thick lamination , teak edge leaping to the periphery of shutter with polishing as per detail drawing with requsite glazing including, all hardwares & fixtures, SS brush finish cylindrical lock of Godrej / doorset or equivalent make ,tower bolt- 260 x 10mm & handle- 125mm with 175x 32mm plate - 2 no, hinges -125mm x 70mm x 4mm -4 nos , door stopper etc. complete as per the direction of architect incharge.
13.23
-
7035.4
Providing and fixing 30mm thick factory made PVC rigid foam paneled door shuttes with frame manufactured by M/s Rajshri/Krishna or equivalent made from M.S. tube of 19 gauge thickness, size 19x19mm for styles and 15x15mm for top and bottom rails, covered with heat moulded PVC “C” channel of 5mm thick sheet and 30x50mm wide to form styles and 5mm thick and 75mm wide PVC sheets for top rail, lock rail and bottom rail on other side and 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, paneling of 5mm thick PVC sheet fitted in the M.S. frame welded / sealed to the styles and rails with 5x30mm PVC sheet beading on either side and joined together with solvent cement adhesive etc., complete as per manufacturers specification including fixing frames with 3 Nos. alumunium butt hinges complete including one 10 inch aluminium aldrop and two aluminium tower bolts of 10 inch and 6 inch and two aluminium handles cost of all materials, conveyance, loading, unloading, and taxes of all materials, cost of all labour, sundries, T&P required for the work as per direction of Engineer-in-Charge.
9.45
-
4355.6
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
830.25
-
82.43
Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour, T&P etc. complete.
776.92
-
72.3
Providing and painting two coats with plastic emulsion paint of (Nerolac/ Asian/ Berger/ Dulox or equivalent make) approved quality and approved shade over coat of primer of approved quality in all floors at all height by making the surface to the interior plastered surface over a coat primer with water bond cement primer of approved quality including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.
776.92
-
135.9
Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
405.65
-
129.6
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
27.68
-
189
Painting to external surface of building with two coats of texture paint over a coat of primer of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
550
-
430
Supplying , fitting and Fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr C/C and stainless steel square pipe bracing of size 32mm x 32mm x 2mm in three rows in staircase as per approved design and specification , buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P, etc. required for the complete in all respects.
41.88
-
334
Supplying, fitting and fixing in position chequred tile of approved make and quality, colour and size in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and with Portland Slag Cement (PSC) grouted with neat white cement slurry with required quantities of pigments of approved marks watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work complete in all respect as directed by the Engineer-in-charge
9
-
572.1
Providing & fixing factory made uPVC white colour sliding glazed window three track three panels sliding window wiyh fly proof SS wire mesh(two nos.glazed & one no. wire mesh panels) made of small series frame 92x44mm sash 32x60mm both having wall thickness of 1.9(+,-)0.2mm & single glazing bead of appropriate dimension etc complete as per direction of EIC.
24.3
-
8177.05
Providing & fixing factory made uPVC white colour sliding glazed window two track two panels sliding window made of big series frame 67x50mm sash 46x62mm both having wall thickness of 2.3(+,-)0.2mm & single glazing bead/double glazing bead of appropriate dimension etc complete as per direction of EIC.
1.22
-
6912.15
Providing,fitting & fixing factory made u-PVC casement cum fixed panel window having both end single casement panel,middle fixed panels & at top completely fixed ventilator with SS friction hinges(350x19x19)made of big series frame 67x60mm,sash67x80mm,& mullion 67x80mm all having wall thickness of 2.3(+,-)0.2mm & single glazing bead/double glazing bead of appropriate dimension etc. complete as per specification and direction of Engineer-in-charge.
2.16
-
6478.75
Providing,fitting & fixing of 12mm thick frame less toughened glass door shutter as per design, drawing and approved specification useing 12mm thick toughened glass of approved qulity mechine polished edges, including providing top and bottom pivot and floor spring and stainless handle of approved make any other hardwares and fitting like godrej/ dorset of equivalent requird for the work including moulding, fitting and fixing with cost of all material, all labour, all T&P etc. required for the work complete in all repect as per specification and direction of Engineer-in-charge.
7.5
-
11428.6
Providing & fixing in position false ceiling using Calsium siliate board as per the pattern design made from 8 mm thick Calcium silicate board fixed with main G.I Frame channel all along the wall shall be provided.The frame work to be suspended with G.I flats or adjustable M.S rod from intermediate channels using nuts & bolts as recommended using rawls plugs 12.5 mm dia bolts & soft cleat 27mmx37mmx25mm.Arrangements are to be madeto accommodate light fixtures,curtain rails by forming recessed channels which shall be done with jointing compound &paper tape.Ceilling to be leveled & free from cracks.Items to be completed in all respect to the architect’s approval to accommodate lighting fixtures.Opening in the ceiling are to be tied with perimeter channel complete with the cost of all labour & materials,painting with acrylic putty with two coats of plastic emulsion paint etc as per specification & direction of EIC.
120.96
-
1137.85
Providing,fitting & fixing of premoulded decorative corner beading of gypsum having cross sectional dimension 112x80mm & fixing the wall etc complete as per direction of EIC.
100
-
399.5
Providing 20mm avg. thick Decorative Cement plaster with cement mortar of mix (1:4) in all floors with neat cement punning over top of the walls including watering and curing along with the cost, conveyance,royalties of all materials and cost of all labours, sundries, T&P etc. complete in all respect as per specification and direction of Engineer-in-charge.
75
-
339.1
B) MEDITATION CENTER (RENOVATION)
-
-
-
Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges upto 5M height
315.59
-
3.5
Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead. complete in all respects as per direction of Engineer-in-Charge.
76.5
-
1098.9
Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m lead complete in all respects as per direction of Engineer-in-Charge.
76.5
-
39.34
Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead.
153.6
-
98.4
Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead.
93.6
-
51.1
Rubbing old marble chips or marble tile flooring and dados skirting including wax polishing to give granolithic finish. (As per S/R-2006, P-110, Item-3)
60.22
-
55.6
Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
51
-
218.7
Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge.
32.4
-
156.9
Providing 12mm thick C.P. 1:6 finished even and smooth on masonry walls including racking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and levels and providing grooves as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, taxes, royalty, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.
108.45
-
142.9
Providing fitting, laying and fixing vitrified tile flooring using Digital eternity series tiles having thickness of 6.5mm to 6.7mm conforming to IS 13756 of 600mmx600mm special plane / printed series of approved quality of Kajaria or equivalent having base price of the tile Rs. 50 -60 / sqft in all floors on 25mm thick cement and sand mortar in ( 1:4) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing , watering and curing etc including cost conveyance taxes of all materials and cost, conveyance,taxes of all labour with T&P required etc. complete in all respects as per direction of Engineer-in-Charge.
9
-
918.8
Providing fitting, laying and fixing vitrified tile in dado/ skirting using Digital eternity series tiles having thickness of 6.5mm to 6.7mm conforming to IS 13756 of 600mmx600mm special plane / printed series of approved quality of Kajaria or equivalent having base price of the tile Rs. 50 -60 / sqft in all floors on 12mm thick cement and sand mortar in ( 1:3) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing , watering and curing etc including cost conveyance taxes of all materials and cost, conveyance,taxes of all labour with T&P required etc. complete in all respects as per direction of Engineer-in-Charge.
1.8
-
932.4
Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
4
-
1125.5
Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
1.2
-
1025.4
Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
14.94
-
2061.7
Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
7.47
-
2075.2
Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
49.8
-
237.6
Providing & Fixing tiles 30cm x 30cm/ 40cm x 40 cm special plain / printed series ceramic floor tiles of premium grade (Base price of the tile not less than Rs. 30 -50 / sqft) having thickness 7mm to 8mm confirming to IS 13755 in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.(in toilet floor area)
4.58
-
729.6
Providing & Fixing tiles of 30cm x 45 cmspecial plain/ printed series ceramic wall tiles of premium grade (Base price of the tile not less than Rs. 30 -50 / sqft) having thickness 6.5mm to 6.7mm confirming to IS 13755 in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and cleaning complete. (in toilet walls)
93.6
-
720.8
Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour, T&P etc. complete.
315.59
-
72.3
Providing and painting two coats with plastic emulsion paint of (Nerolac/ Asian/ Berger/ Dulox or equivalent make) approved quality and approved shade over coat of primer of approved quality in all floors at all height by making the surface to the interior plastered surface over a coat primer with water bond cement primer of approved quality including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.
315.59
-
135.9
Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
62.15
-
129.6
Painting to external surface of building with two coats of texture paint over a coat of primer of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
550
-
430
Supplying , fitting and Fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr C/C and stainless steel square pipe bracing of size 32mm x 32mm x 2mm in three rows in staircase as per approved design and specification , buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P, etc. required for the complete in all respects.
69.1
-
334
Supplying, fitting and fixing in position chequred tile of approved make and quality, colour and size in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and with Portland Slag Cement (PSC) grouted with neat white cement slurry with required quantities of pigments of approved marks watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work complete in all respect as directed by the Engineer-in-charge
2.25
-
572.1
Providing,fitting & fixing of 12mm thick frame less toughened glass door shutter as per design, drawing and approved specification useing 12mm thick toughened glass of approved qulity mechine polished edges, including providing top and bottom pivot and floor spring and stainless handle of approved make any other hardwares and fitting like godrej/ dorset of equivalent requird for the work including moulding, fitting and fixing with cost of all material, all labour, all T&P etc. required for the work complete in all repect as per specification and direction of Engineer-in-charge.
7.5
-
11428.6
Providing,fitting & fixing of premoulded decorative corner beading of gypsum having cross sectional dimension 112x80mm & fixing the wall etc complete as per direction of EIC.
100
-
399.5
Providing 20mm avg. thick Decorative Cement plaster with cement mortar of mix (1:4) in all floors with neat cement punning over top of the walls including watering and curing along with the cost, conveyance,royalties of all materials and cost of all labours, sundries, T&P etc. complete in all respect as per specification and direction of Engineer-in-charge.
75
-
339.1
Providing and Fixing white fiber made Selfie point (Buddhist Sculpture of 5 feet height ) as per design and specification with stone statue buddha on it as per the direction of The architect
1
-
200000
C) CAFETERIA (RENOVATION)
-
-
-
Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges upto 5M height
1260.94
-
3.5
Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead. complete in all respects as per direction of Engineer-in-Charge.
41.27
-
1098.9
Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m lead complete in all respects as per direction of Engineer-in-Charge.
41.27
-
39.34
Dismantling & removing doors,window & ventilatots including removal of frame ,hinges ,fastening & stacking the same for reuse & removing the debris within 50m lead.
0.72
-
315.6
Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead.
94.93
-
98.4
Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead.
34.8
-
51.1
Rubbing old marble chips or marble tile flooring and dados skirting including wax polishing to give granolithic finish. (As per S/R-2006, P-110, Item-3)
271.75
-
55.6
Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
71.44
-
218.7
Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge.
81
-
156.9
Providing 12mm thick C.P. 1:6 finished even and smooth on masonry walls including racking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and levels and providing grooves as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, taxes, royalty, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.
38.1
-
142.9
Providing fitting, laying and fixing vitrified tile flooring using Digital eternity series tiles having thickness of 6.5mm to 6.7mm conforming to IS 13756 of 600mmx600mm special plane / printed series of approved quality of Kajaria or equivalent having base price of the tile Rs. 50 -60 / sqft in all floors on 25mm thick cement and sand mortar in ( 1:4) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing , watering and curing etc including cost conveyance taxes of all materials and cost, conveyance,taxes of all labour with T&P required etc. complete in all respects as per direction of Engineer-in-Charge.
703.13
-
918.8
Providing fitting, laying and fixing vitrified tile in dado/ skirting using Digital eternity series tiles having thickness of 6.5mm to 6.7mm conforming to IS 13756 of 600mmx600mm special plane / printed series of approved quality of Kajaria or equivalent having base price of the tile Rs. 50 -60 / sqft in all floors on 12mm thick cement and sand mortar in ( 1:3) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing , watering and curing etc including cost conveyance taxes of all materials and cost, conveyance,taxes of all labour with T&P required etc. complete in all respects as per direction of Engineer-in-Charge.
15
-
932.4
Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
132
-
1125.5
Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
2.7
-
1025.4
Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
12.9
-
2061.7
Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
6.16
-
2075.2
Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
41.1
-
237.6
Providing & Fixing tiles 30cm x 30cm/ 40cm x 40 cm special plain / printed series ceramic floor tiles of premium grade (Base price of the tile not less than Rs. 30 -50 / sqft) having thickness 7mm to 8mm confirming to IS 13755 in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.(in toilet floor area)
91.44
-
729.6
Providing & Fixing tiles of 30cm x 45 cmspecial plain/ printed series ceramic wall tiles of premium grade (Base price of the tile not less than Rs. 30 -50 / sqft) having thickness 6.5mm to 6.7mm confirming to IS 13755 in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and cleaning complete. (in toilet walls)
153.54
-
720.8
Providing and fixing in position wood plastic composite door frame including two coats of hot bitumen applied to rear of frame in contact with masonry or concrete surface fixed with MS hold fast of 40x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including panting two coats of synthetic enamel paints over a coat of primer both of approved brand and shade to exposed surface including cost, conveyance, loading, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge
20.7
-
1217
Providing and fixing of 32mm thick ISI marked factory made flush door shutters conforming to IS 2202 (Part-I) both side commercial of approved make , both faces of shutters finished with 1mm thick lamination , teak edge leaping to the periphery of shutter with polishing as per detail drawing with requsite glazing including, all hardwares & fixtures, SS brush finish cylindrical lock of Godrej / doorset or equivalent make ,tower bolt- 260 x 10mm & handle- 125mm with 175x 32mm plate - 2 no, hinges -125mm x 70mm x 4mm -4 nos , door stopper etc. complete as per the direction of architect incharge.
8.19
-
7035.4
Providing and fixing 30mm thick factory made PVC rigid foam paneled door shuttes with frame manufactured by M/s Rajshri/Krishna or equivalent made from M.S. tube of 19 gauge thickness, size 19x19mm for styles and 15x15mm for top and bottom rails, covered with heat moulded PVC “C” channel of 5mm thick sheet and 30x50mm wide to form styles and 5mm thick and 75mm wide PVC sheets for top rail, lock rail and bottom rail on other side and 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, paneling of 5mm thick PVC sheet fitted in the M.S. frame welded / sealed to the styles and rails with 5x30mm PVC sheet beading on either side and joined together with solvent cement adhesive etc., complete as per manufacturers specification including fixing frames with 3 Nos. alumunium butt hinges complete including one 10 inch aluminium aldrop and two aluminium tower bolts of 10 inch and 6 inch and two aluminium handles cost of all materials, conveyance, loading, unloading, and taxes of all materials, cost of all labour, sundries, T&P required for the work as per direction of Engineer-in-Charge.
9.45
-
4355.6
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
762.75
-
82.43
Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour, T&P etc. complete.
1260.94
-
72.3
Providing and painting two coats with plastic emulsion paint of (Nerolac/ Asian/ Berger/ Dulox or equivalent make) approved quality and approved shade over coat of primer of approved quality in all floors at all height by making the surface to the interior plastered surface over a coat primer with water bond cement primer of approved quality including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.
1260.94
-
135.9
Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
263.76
-
129.6
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
25.43
-
189
Painting to external surface of building with two coats of texture paint over a coat of primer of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
550
-
430
Supplying , fitting and Fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr C/C and stainless steel square pipe bracing of size 32mm x 32mm x 2mm in three rows in staircase as per approved design and specification , buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P, etc. required for the complete in all respects.
41.88
-
334
Supplying, fitting and fixing in position chequred tile of approved make and quality, colour and size in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and with Portland Slag Cement (PSC) grouted with neat white cement slurry with required quantities of pigments of approved marks watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work complete in all respect as directed by the Engineer-in-charge
39.06
-
572.1
Providing & fixing factory made uPVC white colour sliding glazed window three track three panels sliding window wiyh fly proof SS wire mesh(two nos.glazed & one no. wire mesh panels) made of small series frame 92x44mm sash 32x60mm both having wall thickness of 1.9(+,-)0.2mm & single glazing bead of appropriate dimension etc complete as per direction of EIC.
22.27
-
8177.05
Providing & fixing factory made uPVC white colour sliding glazed window two track two panels sliding window made of big series frame 67x50mm sash 46x62mm both having wall thickness of 2.3(+,-)0.2mm & single glazing bead/double glazing bead of appropriate dimension etc complete as per direction of EIC.
2.43
-
6912.15
Providing,fitting & fixing factory made u-PVC casement cum fixed panel window having both end single casement panel,middle fixed panels & at top completely fixed ventilator with SS friction hinges(350x19x19)made of big series frame 67x60mm,sash67x80mm,& mullion 67x80mm all having wall thickness of 2.3(+,-)0.2mm & single glazing bead/double glazing bead of appropriate dimension etc. complete as per specification and direction of Engineer-in-charge.
0.72
-
6478.75
Providing,fitting & fixing of 12mm thick frame less toughened glass door shutter as per design, drawing and approved specification useing 12mm thick toughened glass of approved qulity mechine polished edges, including providing top and bottom pivot and floor spring and stainless handle of approved make any other hardwares and fitting like godrej/ dorset of equivalent requird for the work including moulding, fitting and fixing with cost of all material, all labour, all T&P etc. required for the work complete in all repect as per specification and direction of Engineer-in-charge.
7.5
-
11428.6
Providing & fixing in position false ceiling using Calsium siliate board as per the pattern design made from 8 mm thick Calcium silicate board fixed with main G.I Frame channel all along the wall shall be provided.The frame work to be suspended with G.I flats or adjustable M.S rod from intermediate channels using nuts & bolts as recommended using rawls plugs 12.5 mm dia bolts & soft cleat 27mmx37mmx25mm.Arrangements are to be madeto accommodate light fixtures,curtain rails by forming recessed channels which shall be done with jointing compound &paper tape.Ceilling to be leveled & free from cracks.Items to be completed in all respect to the architect’s approval to accommodate lighting fixtures.Opening in the ceiling are to be tied with perimeter channel complete with the cost of all labour & materials,painting with acrylic putty with two coats of plastic emulsion paint etc as per specification & direction of EIC.
117.19
-
1137.85
Providing,fitting & fixing of premoulded decorative corner beading of gypsum having cross sectional dimension 112x80mm & fixing the wall etc complete as per direction of EIC.
100
-
399.5
Providing 20mm avg. thick Decorative Cement plaster with cement mortar of mix (1:4) in all floors with neat cement punning over top of the walls including watering and curing along with the cost, conveyance,royalties of all materials and cost of all labours, sundries, T&P etc. complete in all respect as per specification and direction of Engineer-in-charge.
75
-
339.1
Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge.
244.44
-
300.1
Water proofing to the Roof slab/ Wet area (a) Surface Preparation :Cleaning the surface thoroughly by wire brush,mechanical grinder for making it free from all loose particles,dust etc. then total cleaning through air blower followed by water jelling anrface to dry. (b) Application: Supply & application of Nano Technology organ silane based zycosil @ 1:20 (one part zycosil & 20 parts of clean water) to the saturation level on the entire flat surface and upto 300mm(1ft) to the parapet walls & then allowing for drying 24 hrs.,test the surface for hydrophobicity.Then application of 100% acrylic co-polymer zycoprime+cement & fine sand(100mesh) mixed at a consistency of paste form & filling drainage pipes gaps.Then application of one coat of Elasocoat mix of Elastobar+grey cement @1:1 ratio(1 part zycoprime+1 part cement).2nd part ofzycoat mix (1 part zycoprime+1 part cement) to be applied after the drying of first coat in the same procedure followed by sprinkling of river sand on top of the slurry.Then allow it to dry followed by proper air curing with cost,conveyance,loading & unloading of all materials,cost of all labour,sundries T&P scaffolding etc.required for the work in all respect as direction of EIC.
776.37
-
392.55
D) WATER SUPPLY & SANITARY WORKS (Guest House & Cafeteria)
-
-
-
Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted rimless water closet of Hindware make having cat no 92528 or equivalent type of approved make including supply of matching P/S trap to the wall with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, 15mm dia connection pipe ALD 803 AB, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge.
12
-
14675.4
Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware counter top wash hand basin of size 54x42x16.5cm dia of Hindware make having cat no 91046 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.
13
-
10117
Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type glass mirror of size 900mm x 600mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge.
13
-
1089.8
Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-KUP 35053PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
25
-
1373.6
Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-KUP 35041PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
12
-
2161.3
Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD 573 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
12
-
1580
Supplying all materials, labour, T&P and fixing standard sized CP towel rail - 24" of Jaquar Cat. No.-AKP 35711PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
12
-
2363.1
Supplying all materials, labour, T&P and fixing standard sized CP towel ring of Jaquar Cat. No.-AKP 35721P or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
13
-
1856.1
Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-AKP 35771P or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
19
-
1795
Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Cat. No.-AKP 35731P or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
27
-
1184.1
Supplying all materials, labour, T&P and fixing toilet paper holder of Jaquar Cat. No.-AKP 35753PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
12
-
1706.7
Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge
33
-
93.5
Supplying all materials, labour, T&P and fixing SS Sink without Drain board Nirali Elegance Ultra or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
3
-
9118.3
Supplying all materials, labour, T&P and fixing standard sized 15mm dia Piller cock of Jaquar Cat. No.-KUP 35001 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
12
-
1960.4
Supplying all materials, labour, T&P and fixing standard size Sink cock of Jaquar Cat. No.-CON 347KNM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
3
-
1595.33
Supplying all materials, labour, T&P and fittings and fixing of 15 LITER GYSER Bajaj / Havels/Usha etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
2
-
9500
Supplying all materials, labour, T&P and fittings and fixing of 2000 ltr Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately)
5
-
24316.1
Providing and fixing white glazed urinals 26.5 x 31.5 x 44 cm Hindware (Cat no- 60011 Eqv OF Cera/ parryware) including plumbing connections with CPVC pipefrom the water supply line to the urinal complete and concealed C.I. brackets, C.P. flush pipe, 15 mm Dia. 1no C.P. spreaders, 1 Nos. C.P. waste coupling with 1 Nos.waste pipe , 1 No PVC P/S Trap with stainless steel grating in floor. Jointing, making good the damages caused to walls & floors, painting the brackets etc. Necessary pipes between urinal & main supply line to be included in the rates. Range of single urinal basin. cost including all materials, labour,tax, T&P, lead, royality etc.work complete in all respects as per direction of Architect incharge.
3
-
3285.6
Providing and fixing urinal glass partition of Jaquar JSE-CHR-810BR-US450X of sizeH-9Ocm & width 45cm including cost of all labour T&P etc complete as per direction of Engineer -in- charge.
4
-
4661.4
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes (selfit / ring fit type ) with all PVC fittings of Finolex /Prince/Supreme make as per IS 13592 to walls with nails, bobbins and wooden plugs or laying in trenches including all pipe fittings, jointing materials, tools plant, labour & all material, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.
-
-
-
160mm dia PVC (SWR) pipe class "A" ( with wall thickness of 3.2mm to 3.8mm)
90
-
500.5
110 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 2.20 mm to 2.70 mm)
190
-
264.5
75 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 1.8 mm to 2.20 mm )
50
-
159.9
Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of bedding for 160mm pvc pipes of the following internal diameter including curing complete as per specification
90
-
367.9
Supplying all materials,labours,T&P and constructing gully trap chamber of 250mmx 250mm inside size with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size hg chips,foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plaster in cement mortar (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mm x150mm size CI grating etc all complete as per approved drawing,specification and direction of Engineer-in-charge.
19
-
1931.56
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of ( AJAY/ ASHIRVAD/ ASTRAL) confirming to ASTM F442 Specific-2 having thermal stability for hot & cold water supply SDR 11 , including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
20 mm nominal outer dia Pipes
190
-
198.9
25 mm nominal outer dia Pipes
170
-
247.7
32 mm nominal outer dia Pipes
75
-
348.9
40 mm nominal outer dia Pipes
130
-
474.1
50 mm nominal outer dia Pipes
40
-
688.4
Cutting grooves in pucca floors and walls for taking GI/PVC /CPVC pipes including making good the damages caused with cost of all material,labour, scafolding, tools, plant, royalty etc. complete in all respects.
320
-
166.6
Supplying & Fixing long body Bib cock of CP brass of Jaquar continetnal cat no- CON-107/ eqv of crabtree / lauret including making good the damages including tools, plant, all material,labour , scaffolding etc. complete.
3
-
1334
Supplying & Fixing Bib cock of CP brass of Jaquar continetnal cat no- CON-039/ eqv of crabtree / lauret including making good the damages including tools, plant, all material,labour , scaffolding etc. complete.
14
-
1012.5
Supplying & Fixing concealed stop cock of CP brass (Jaquar cat no-CON-069 , continental / eqv of crabtree / lauret) including making good the damages including tools, plant, all material,labour , scaffolding etc. complete.
5
-
1078.3
Providing & Constructing manhole chamber of following sizes including earth work in excavation, back filling,KB Brick masonary work four sides to make chamber, Plain Cement Concrete (1:2:4) 30cm depth in bottom of chamber with 1/2" down graded Crusher broken hard granite chips, inside cement plaster 12mm thick in CM 1:3 & neat cement punning , Top slab in RCC ( 1:2:4) 15cm thick with necessary centering & shuttering, TMT steel reinforcement @10 cm c/c both way, cast iron manhole cover with frame, making channel in floor of chamber with necessary slope complete with all materials, labour, tools, plant, royalty, curing, etc. in all respects as per the direction of Engineer-in-charge.
-
-
-
Plain manhole inside 900x800and 450mm deep with cast iron manhole and frame(light duty) rectangular type 450mmx610mm internal dimension.
11
-
8505.9
Plain manhole inside 1200x900and 900mm deep with cast iron manhole and frame(medium duty) circular 560mm internal dia , wt of cover and frame to be not less than 128kg.
7
-
14566.7
Providing and fixing 40mm dia gunmetal fullway valve of approved make and quality with all materials, labour, tools, plant, scafolding , making good the damages caused, complete in all respects
7
-
1972.2
Providing and fixing 50mm dia gunmetal fullway valve of approved make and quality with all materials, labour, tools, plant, scafolding , making good the damages caused, complete in all respects
4
-
2925.8
Supplying all materials,labours,T&P and cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI /CPVC /PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.
40
-
44.75
WATER FILTER
-
-
-
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 80 PSS UV of size 750x570x1350mm height with water storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
2
-
78254
E) SHOP COMPLEX (RENOVATION)
-
-
-
CIVIL & STRUCTURE
-
-
-
Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges upto 5M height
673.31
-
3.5
Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead. complete in all respects as per direction of Engineer-in-Charge.
101.6
-
1098.9
Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m lead complete in all respects as per direction of Engineer-in-Charge.
101.6
-
39.34
Dismantling & removing doors,window & ventilatots including removal of frame ,hinges ,fastening & stacking the same for reuse & removing the debris within 50m lead.
63
-
315.6
Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead.
228.6
-
98.4
Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead.
228.6
-
51.1
Rubbing old marble chips or marble tile flooring and dados skirting including wax polishing to give granolithic finish. (As per S/R-2006, P-110, Item-3)
125.24
-
55.6
Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
40.96
-
218.7
Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge.
22.58
-
156.9
Providing 12mm thick C.P. 1:6 finished even and smooth on masonry walls including racking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and levels and providing grooves as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, taxes, royalty, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.
47.62
-
142.9
Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
138
-
1125.5
Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
16.35
-
1025.4
Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
19.8
-
2061.7
Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
9.9
-
2075.2
Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
13.2
-
237.6
Rolling Shutter
1890
-
71
Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour, T&P etc. complete.
673.31
-
72.3
Providing and painting two coats with plastic emulsion paint of (Nerolac/ Asian/ Berger/ Dulox or equivalent make) approved quality and approved shade over coat of primer of approved quality in all floors at all height by making the surface to the interior plastered surface over a coat primer with water bond cement primer of approved quality including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.
673.31
-
135.9
Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
332.25
-
129.6
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
63
-
189
Painting to external surface of building with two coats of texture paint over a coat of primer of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
550
-
430
Supplying, fitting and fixing in position chequred tile of approved make and quality, colour and size in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and with Portland Slag Cement (PSC) grouted with neat white cement slurry with required quantities of pigments of approved marks watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work complete in all respect as directed by the Engineer-in-charge
4
-
572.1
Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge.
215.16
-
300.1
F) INTERNAL ELECTRICAL WORK (Guest house,Shop Complex,Meditation center,Cafeteria)
-
-
-
GROUP A :Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard/L&T)
60
-
571
GROUP B: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard/L&T)
80
-
798.6
GROUP C: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.0 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard )
160
-
1084.2
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.0 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
20
-
404
Wiring for light point/ fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.0 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard )
30
-
1194.6
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch ,4 module 18SWG modular GI box and earthing point with 1 x 1.0 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex / Anchor /Havells / KEl/ Vguard/L&T)
30
-
623.1
Supplying and fixing of 3 module GI box with cover on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 10 amps socket outlet and 10 amps modular type switch, connection, painting etc as required.(Make-Anchor/crabtree/Legrand)
60
-
478.2
Supplying and fixing of 4 module GI box with cover on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 20 amps socket outlet and 20 amps modular type switch, connection, painting etc as required.(Make-Anchor/crabtree/Legrand)
25
-
615
Supplying and fixing of 6 module GI box with cover on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 2 nos 5 pin 10 amps socket outlet and 2 nos 10 amps modular type switch, connection, painting etc as required.(Make-Anchor/crabtree/Legrand)
45
-
706.4
Supplying and fixing of metal box of 32A D.P modular switch on surface or in recess with 2 Madular metal box with cover in front including providing and fixing , connection etc as required as per the direction of Engineer-in-Charge.
30
-
565.7
Supplying and fixing of metal box of 20A modular socket on surface or in recess with 2 Madular metal box with cover in front including providing and fixing , connection etc as required as per the direction of Engineer-in-Charge.
30
-
431.4
Supplying and fixing of 100W,step type regulator, 2 Module without base and cover including connection etc as required. (Make-Roma/Anchor/L&T/Legrand/Havells crabtree)
30
-
511.3
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
30
-
28
Supply and fixing of TV antenna Socket outlet completely providing 1 no. of TV antenna socket & Top , moulded case metal box & plate of adequate size including PVC bend, saddle, elbow, etc. & other necessary materials & labour complete as per the direction of Engineer-in-Charge. complete as per the direction of Engineer-in-Charge.( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand )
10
-
341.3
Supplying and fixing of RJ11 telephone jack single with shutter & RJ 45 computer jack with shutter, 2module modular base and cover including connection for telephone and LAN . (Make-Roma/Anchor/L&T/ Legrand/ Havells /crabtree)
10
-
341.3
Wiring for Circuits and Submain with following number & sizes of PVC insulated 1100 Volt Grade Multistranded Copper Conductor FRLS Wire run inside 2 mm thick PVC Conduit Pipe Recessed in Ceiling / Column / Walls of Building including supply of all materials such as wires, PVC Conduit, Junction Box & Pull Box etc. complete with making good the damages caused as required and as per Direction of Engineer-In-Charge. (Make of wire Finolex/Anchor/Havels/KEI)
-
-
-
2 Nos. Single Core 1.5 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD (Make of wire Anchor/Havels/KEI)
450
-
128
2 Nos. Single Core 2.5 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD (from LDB to Room & Power Point and Common Light Point looped).(Make of wire Anchor/Havels/KEI)
1200
-
142.1
2 Nos. Single Core 4.0 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 2.5 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD.(Make of wire Anchor/Havels/KEI)
800
-
166.7
2 Nos. Single Core 10.0 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 4 mm2 FRLS Copper Wire for Earth Continuity Conductor as per SLD.(Make of wire Anchor/Havels/KEI)
260
-
262.2
4 nos single core 4 sq. mm copper wire for phase and neutral and 1 nos of single core 2.5 sq. mm copper wire for earth continuty conductor.
280
-
219.3
4 nos single core 10 sq. mm copper wire for phase and neutral and 1 nos of single core 4 sq. mm copper wire for earth continuty conductor.
280
-
392.7
Wiring to Telephone Socket Outlet from Junction Box with 0.5 mm2 Twin Pair Copper Conductor Telephone Wire run inside prelaid PVC Conduit complete including termination, testing etc complete as required and as per Direction of Engineer-In-Charge.
120
-
101.8
Supply, delivery, installation and testing of TV Antenna Wires RG6 in PVC Pipe and making good the damages caused complete as required and as per Direction of Engineer-In-Charge. (Make of wire Finolex/Anchor/Havels/KEI)
120
-
101.4
BRANCH DISTRIBUTION BOARDS:
-
-
-
Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
12 way, Double door MAKE:LEGRAND, L&T,HAVELLS)
4
-
1914.4
4 way, Double Door TPN DB
4
-
2178.9
4 way, Double Door VTPN DB
6
-
12752.5
Supplying and fixing following rating residual current circuit breaker (RCCB), having a sensitivity current 300 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
25 amp 2pole RCCB
4
-
4306
40 amp 2pole RCCB
4
-
4338
63 amp 4pole RCCB
6
-
5685
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
60
-
131.8
Single pole blanking plate in the existing MCB DB
8
-
7
MAIN DISTRIBUTION BOARD
-
-
-
PANEL BOARD:
-
-
-
Supplying, Installing, Testing and Energizing MS Cubical type Panel Board made of 2 mm thick CRCA Sheet with Hinged Door duly Fabricated with required MS Angle and Channels of adequate size, duly treated and Powder Coated (shall have Hinged Door at the Front and Detachable Plates at Back if requirement and at Top / Bottom for Cable / Wire Entry / Exit as per the Direction of Engineer-In-Charge and approved GA Drawing with following provisions. MAKE-L&T / LEGRAND / C&S/ Havells/)
-
-
-
Main Panel Board:
-
-
-
Incoming:
-
-
-
200 Amp. 4P MCCB 25 KA (Thermal Magnetic Release) - 1No
-
-
-
100 AMP 4WAY MANUAL CHANGOVER SWITCH 1 NO
-
-
-
Equiments:
-
-
-
4 Nos. 300 Amp. Copper Bus Bar coated with PVC Heat Shrunk Sleeve (Colour Code).
-
-
-
4 Nos. 160 Amp. Copper Bus Bar coated with PVC Heat Shrunk Sleeve (Colour Code).
-
-
-
1 No. VAF Digital Meter.
-
-
-
3 Nos. RYB LED Indicator.
-
-
-
3 Nos.63 / 5 Amp. C.T. Operated.
-
-
-
Outgoing:
-
-
-
3 Nos 40 AMP DP MCB 10 KA
-
-
-
3 Nos 63 AMP 4P MCB 10 KA
-
-
-
6 Nos.63/100 Amp. 4P MCCB 16 KA.
1
-
126702.6
FITTINGS & FIXTURES:
-
-
-
Supply,Installation and testing of following types of LED Tube Fixtures Directly on Wall / Ceiling/ Structure of Building with all accessories such as Electronics Ballast, Lamps, Stove Enameled Box, Perplex Sheet Cover etc. complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge. Make- Havells,BAJAJ,wipro,Philips
-
-
-
Supply, Installation,Testing & commissioning of surface and wall mounted 18 watt LED batten with Aluminum housing & integrated electronic driver indoor type including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
30
-
954.3
Supply, Installation,Testing & commissioning of surface and wall mounted 10 watt LED batten with Aluminum housing & integrated electronic driver indoor type including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
22
-
729.2
Supply, Installation,Testing & commissioning of Wall bracket light with 1 N x 4 W A45/Candle LED Filament Lamp holder type Luminaire of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make : Havells LHFOAIC1TZ1I040 / Bajaj /Phillips/Wipro or Equivalent)
30
-
2685.4
Supply, Installation,Testing & commissioning of 12 watt Recessed mounted indoor type round LED downlighter with white powder coated aluminium housing with integrated electronic driver etc complete With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
45
-
1435.2
Supply, Installation,Testing & commissioning of 18 watt Surface mounted indoor type round LED downlighter with white powder coated aluminium housing with integrated electronic driver etc complete With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
30
-
2625.6
Supply, Installation,Testing & commissioning of Flexible LED strip 5 mtr long with wide viewing angle for good light distribution & IP20 protection, linkable and easy to install, complete with separate replaceable electronic driver approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
20
-
2386.3
Supply, Installation,Testing & commissioning of Highbrightness IP66 LED strip Outdoor type with wide viewing angle for good light distribution linkable and easy to install complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
250
-
229.8
Supply, Installation,Testing & commissioning of Environmental friendly, new generation, energy saving, decorative rectangular shaped IP66 LED step light for wall recessed application etc complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells (RADIANTFTR07WLED830PSYMTOPC) / Bajaj /Phillips/Wipro or Equivalent)
20
-
4420.1
Supplying, installation and commissioning of IP65 8 Watt High efficent LED Bollard Light made with Pure polyester UV resistant powder coated die cast aluminium housing withPMMA clear diffuser for uniform illumination with supply of all materials, Nut & Bolt such as, connecting wires and all accessories and sundries as required for the work and as per direction of Engineer-in-Charge.Make: Havells / BAJAJ / Wipro
10
-
7013.1
Supply, Installation, Testing, and commissioning of decorative ceiling fan 1200 mm sweep 230/240 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy, rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. . (Model-SS 390 Havells / Bajaj /Crompton)
25
-
3063.5
Supply, Installation, Testing, and commissioning of decorative Wall fan 400 mm sweep 230/240 volts, 50HZ complete with suitable, clamp, (as per site requirement) and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge(Make-Havells / Bajaj /Crompton or Equivalent)
12
-
3101.2
Supply, delivery, installation & testing of following Sweep & Speed Exhaust Fan on Existing Sheet Metal Switch Board including loop connections and making good the damages caused complete as required and as per direction of Engineer-in-charge(Make-Havells / Bajaj /Crompton or Equivalent)
-
-
-
200 mm EXHAUST FAN Plastic body
10
-
2265.4
450 mm EXHAUST FAN 1400 RPM.
4
-
5366.7
EARTHING:
-
-
-
Providing and fixing 25 mm x 5 mm Copper earth strip in surface or in recess as strip electrode for connections etc. as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
60
-
458.8
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
6
-
5351
CABLE
-
-
-
Supplying, storing, laying, testing and commissioning of 3.5c x 35 Sq. mm A2XFY Al armoured Cable 1100 Volts including excavation, sand cushing, protective covering and refilling the trench etc. as required. as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
80
-
402.4
Supplying, storing, laying, testing and commissioning of 4c x 16 Sq. mm A2XFY Al armoured Cable 1100 Volts including excavation, sand cushing, protective covering and refilling the trench etc. as required. as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
220
-
298.5
Supplying, storing, laying, testing and commissioning of 3c x 4 Sq. mm A2XFY Copper Cable 1100 Volts etc. as required. as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
280
-
242.7
Supplying of following Materials
-
-
-
First Aid Box.
2
-
750
Shock Treatment Chart (Odia / Hindi & English).
4
-
525
8 mm thick Rubber Mat.
20
-
770
ABS type Fire Extinguisher of 4.5 Kg.
6
-
3800
Danger Board.
1
-
250
cctv camea
-
-
-
Supply and Installation of Indoor Dome IR Network Camera (1/2.7" CMOS sensor, Mini. Pixel of 2560*1920 or higher video quality, frame rate of Up To 25fps @ 2MP, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af (UL, FCC, CE, BIS certified.). Make- Honeywell/UNV/Hikvision
6
-
9800
Supply and Installation of outdoor Bullet IR Network Camera 1/2.7" CMOS, ICR, 2592*1944@ 25fps, 2MP H.265/H.264/MJPEG, Triple streams, DC12V & PoE, Micro SD card slot up to 256 GB, Alarm in/out , Audio 1/1, IP67, 2.7-13.5mm Motorized Varifocal lens, IR anti-reflection window, Built-in bracket, IR range: up to 50m, Digital WDR Range, 3D-DNR for noise reduction, Audio In and Out, Alam in and Out IPv4 network supported, IP67 rated for weather proofing, ONVIF, POE IEEE 802.3af, (UL, FCC, CE, BIS certified). Make-Panasonic/ Bosch/Honeywell/UNV
10
-
11000
Supply and Installation of 8 CH NVR Support 12MP/8MP / 5MP / 4MP / 3MP / 1080P / 960P IP Adopt standard H.265 high profile compression format, With 4k Video Output, Compression Standard H.265, Network Access Bandwidth 320Mbps, HDD SATA × 8(Upto 10TB Supported), 1- e-SATA And 2-way Audio RCA × 1, Local Output RCA × 1, USB 2.0 × 2 (one in the front panel and the other in the rear panel), USB 3.0 × 1 (rear panel) (UL, FCC, CE, BIS certified).32TB(4TBx4nos) Storage Capacity, Make: Segate/WD Make- Honeywell/UNV/Hikvision
2
-
53000
SITC of Cat6 4-pair 23AWG LSZH UTP Cable in 20 mm conduits/trunking. Make: Tyco-AMP/ Legrand/ Digisol
600
-
82
Supply, installation, testing and commissioning of 43” Ultra HD Display, Panel Technology-IPS,Resolution:3,840 x 2,160 (ULTRA HD),brightness:400cd/m2,Dynamic Contrast Ratio -1000000:1, 100-240V, 50/60Hz, Interfaces: HDMI-2 or more, DP, Audio, USB 2.0, RJ45, IR Receiver, Pixel Sensor, Built in WiFi. Built in Quad Core system [SOC] with internal memory 50 MB or higher, Temperature Sensor, Auto Brightness Sensor, ISM Method, USB Cloning, Content Scheduling , Sync mode, PM mode, Fail Over, Wake on LAN, Embedded Template, os, Smart Energy Saving- 70W or more, Industrial grade Certification- UL / cUL / CB / TUV / KC , FCC / CE / KCC, Warranty-3 years complete as required & as per Direction of Engineer-In-Charge. Make : Samsung/ LG /SONY
2
-
56000
G) BORE WELL
-
-
-
Sinking of 200mmx 150mm dia Tube well through DTH Rig.
-
-
-
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
Drilling of 200mm dia bore
-
-
-
0 mtr to 50mtr
50
-
782.6
46mtr to 120mtr
70
-
782.6
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
Lowering of 200mm dia GI/P.V.C/MS casing pipes
120
-
150.8
Cost of 150mm dia P.V.C schedule-80 pipe
50
-
1633.8
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
By DTH/Rotary Rig
1
-
6586
Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department).
-
-
-
Sanitary sealing upto 5mtrs below ground level.
1
-
1173.1
CC(1:2:4)with 12mm chips for grouting upto 5 mtr.Depth in sanitary sealing.
0.16
-
5524.7
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.
-
-
-
40mm dia brass or gun metal Non-return valve
1
-
1958.2
Supplying submerssible pump with sqirrel cage induction type submersible type submerssible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034 - 2002 with following specifications
-
-
-
1.5 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm
1
-
16625.6
DOL controll pannel
1
-
3805.5
4.00sqmm cable
60
-
250
32mm dia steel short piece
2
-
152.3
Steel rope with cover
60
-
26.7
Well cap
1
-
152.3
50mm size CI bracket
2
-
91.3
25 mm C-PVC pipes(Supreme/Ashirvad)
60
-
299.7
Labour charges for lowering of subersible pumpset with pipes and cables etc.with testing and commissioning at site.
1
-
2000
H) DRAIN
-
-
-
Earth work in excavation in all kinds of soil (Ordinary, hard soil & stoney earth soil ) for foundation trenches within 50m. Initial lead and 1.5m initial lift including rough dressing and beaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per specification approved by the department.
50.63
-
207.9
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
10.13
-
115.5
Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only).
6.75
-
725.24
Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect.
6.75
-
4837.2
R.C.C. work of Grade- M 25 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S./TMT/HYSD rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position, centering & shuttering
-
-
-
Foundation
5.63
-
5529.2
RCC Wall
16.88
-
9817
Slab
8.1
-
9731
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. lifting and placing in position as per design complete including cost of bars , binding wires , including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants, etc. complete as per the direction of the Engineer-in-charge. (linear measurement will be taken and quantity will be calculated on standard weight for all heights)-Thermo Mechanically Treated bars
30.6
-
8959.1
Providing 16 mm. thick cement plaster with neat cement punning over plastered in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
112.5
-
218.7
I ) SEPTIC TANK & SOAK PIT
-
-
-
Earth work in excavation in all kinds of soil (Ordinary, hard soil & stoney earth soil ) for foundation trenches within 50m. Initial lead and 1.5m initial lift including rough dressing and beaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per specification approved by the department.
63
-
207.9
Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge
25.2
-
1368.4
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds earth work ( 1st extra lift of 1.5mt (upto 7.5m)
18
-
15
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
12.6
-
115.5
Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only).
3
-
725.24
Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect.
3
-
5477.1
R.C.C. work of Grade- M 25 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S./TMT/HYSD rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position, centering & shuttering
3
-
5377.8
Providing strong, rigid, leveled, and plumbed centering and shuttering to required shape and size , for floors with ply or steel centering materials with all necessary bracing and tiles and supports with leveling centering covered with plastic sheet with provisions necessary holes and pockets for electrical conduits, pipes, P.H. pipes, for hooks or boxes, switch and board insert plates, clamps and extension bars etc., including dismantling the same after the required interval from the date of casting including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.
-
-
-
R.C.C. floor and roof slabs, landings, balconies, projecting sun shades and chajjas upto 4.3m height
30
-
429.8
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. lifting and placing in position as per design complete including cost of bars , binding wires , including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants, etc. complete as per the direction of the Engineer-in-charge. (linear measurement will be taken and quantity will be calculated on standard weight for all heights)-Thermo Mechanically Treated bars
3
-
8959.1
Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.
-
-
-
Foundation & Plinth
26.81
-
4028.1
Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
115.5
-
196.5
Providing neat cement punning over plastered/ concrete surface including watering and curing complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. as directed by the Engineer in charge.
115.5
-
31.7
Providing 6 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:4) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
30
-
156.9
Supplying & Fixing of Manhole cover ( heavy duty ) 450mm x 450mm water tight type including frame cost includes all material,labour, tax,lead tools & plant etc. complete
2
-
2500
Supplying all materials,labours,T&P and constructing 1.22m dia and 2.1m depth soakway pit with precast RCC rings joined loose,gravel backing in the rear of well steining,precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of Engineer-in-charge
2
-
10590.3
PATHWAY LIGHTING (STREET DECORATIVE POLE)
-
-
-
Supply, installation, testing & commissioning of 2655 MM long Light post with 60 watt LED Decorative round light Elegant column lighting feature. which is suitable for both modern and class. architecture Ideal .r creating onentation with exceptional visual comfort These luminanes offer general ambient light in open spaces giving a sense of security in night-lime Clean Lines and pure form are the underlying elements in this series of colurnn light. design. to provide rotationally symmetrical illumination, Light emission 360. / 240..• Luminaire made of extruded aluminium alloy (grade 6063) with die-cast aluminium components and ncn corrosive SS fasteners.
• Shielded / unshielded light.
• For optimum illumination, these luminaries can be supplied in differ.t heights.
• Non yellowing UV stabilized translucent polycarbonate diffuser.
• Silicone gasket.
• MS mounting plate with an anchorage unit made out of hot dip galvants. st.I for extra guarantee against corrosion. Luminaire can be abgned on the mounting plate around 36,
• Cable entries for through-wiring of mains supply cable.
• Integral constant current power supply
• CR ( Ra) ( 90 CRI On ,uest )
• Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply.
• Ordering guide : KL-7036-CCT (Colour Temperature)
• Available CCT 3000K. as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.Make: K lite (KL- 7034 Juno) / Havells / BAJAJ/CG
25
-
38366
Supplying, installation and commissioning of 35W LED post top light luminaries having Versatile pressure die-cast aluminium IP66 with high power LED as light source to be fixed on the ends of pole. Suitable for pole dia Ø 76 mm etc complete with connection from terminal in the pole, complete with supply of all materials, Nut & Bolt such as, connecting wires and all accessories and sundries as required for the work and as per direction of Engineer-in-Charge.Make: Havells- Ruby / BAJAJ /Wipro
4
-
11869.5
Construction of RCC foundation of 1950 x 650 x 650 mm size by using M25 brade RCC and Fe-415 grade steel reinforcement .The scope of work includes necessary excavation of soil and back filling after completing the foundation work, fixing the EN 8 grade J type foundation bolts and 63 mm dia PVC /HDPE pipe inside the foundation for cable entry. The Biddershould execute the work as per the attached foundation drawing and direction of EIC.
25
-
5173.8
Supplying, storing, laying, testing and commissioning of 4c x 6Sq. mm A2XFY Al armoured Cable 1100 Volts including excavation, sand cushing, protective covering and refilling the trench etc. as required. as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
450
-
252.9
Supply, delivery, laying, testing complete as required & as per the direction of Engineer-in-charge of 3 x 4sqmm FRLS PVC Insulated cooper conductor cable with its protection pvc pipes with excavation of cable trench in all kinds of soil & rock and back filling with excavated soil from panel to pole. The cable shall have ISI marking and name of the manufacturer on the body of the cable
220
-
242.7
Supply, installation, testing and commissioning of street light control panel (Floor mounted outdoor type) made out of 2mm thick CR sheet enclosure with 1 no. 63 Amp 4P MCCB as incomer and 3 nos 40A TPN MCB, and suitable timmer switch as outgoing 3 phase 4 wire, 10-40A static type tested KWH Meter inside tamper proof locking arrangement , time switch and contactor for automatic on/off of the lights and suitable arrangement for 3 ½ x 25 mm2 cable for entry /outgoing of 4c x 16mm2 cable, complete with locking arrangement as required as per technical specification and instruction of EIC.
2
-
38731.29
Supply, installation, testing and commissioning of Spike earthing including excavation of earth pit in all kinds of soil/rock filling with charcoal & salt, connections to earthing studs/ bolt of the pole complete including supply of all materials.
30
-
600
Supplying, storing, laying, testing and commissioning of 4c x 16 Sq. mm A2XFY Al armoured Cable 1100 Volts including excavation, sand cushing, protective covering and refilling the trench etc. as required. as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
80
-
298.5
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
4
-
5351
Providing and fixing 25 mm x 5 mm Copper earth strip in surface or in recess as strip electrode for connections etc. as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
40
-
458.8
Supply & laying of 50mm size (M) G.I. pipe for cable passing through the road with necessary fittings as required as per the direction of EIC.
30
-
450
K) FAÇADE LIGHTING
-
-
-
Supply, installation, testing & commissioning of LED strip light 24V, power consuption 12W/Mtr, 60 watt LED/Mtr, protection rating IP65,Color:RGBW and fixing arrangements to fix the lights.Roll of 5 mtr. (Without DC Power Drive) Code: LK STP 12 RGB etc complete as per the direction of Engineer-in-Charge.Make LEKSA/ Wipro/Canara
60
-
1144
Supply, installation, testing & commissioning of high quality spot light, Power:3W, CCT:3000K/5600K/Amber, Protection Rating:IP65 ,additional wall mount yoke arrangements for fixing the lights.Beam Angle15º/25º ,Body:Diecasted/extruded aluminium,Optics Designed to minimize hotspots.Power Input:DC 24V (without DC Driver) Code:LK SL 03T/D/A etc complete as per the direction of Engineer-in-Charge. Make LEKSA/ Wipro/Canara
5
-
1614
Supply, installation, testing & commissioning of High quality 4way star light Protection Rating:IP65,with wall mount arrangement for fixing the lights.Power:4x2W,CCT:3000K/5600K ,Beam Angle 5º,Body: Diecasted/ extruded aluminium,Optics Designed to minimize hotspots & fringing incolor mixing applications. Power Input : AC 220V, 50Hz. Code: LK 4WAY 08T/D/A etc complete as per the direction of Engineer-in-Charge.Make LEKSA/ Wipro/Canara
2
-
13264
Supply, installation, testing & commissioning of high quality two way decorative light,Power:12W,CCT:3000K/5600K, Protection Rating:IP65, additional wallmount yoke arrangements for fixing the lights. Beam Angle 15º,Body:Die casted/extruded aluminium,Optics Designed to minimize hotspots. Power Input : AC 110-230V, 50Hz. Code: LK 2WAY 12T/D/A etc complete as per the direction of Engineer-in-Charge. Make LEKSA/ Wipro/Canara
4
-
10611
Supply, installation, testing & commissioning of PVC insulated multicore electrical un armored flexible 3Cx1.5Sqmm powercable having less electrical losses.This PVC insulated and round sheathed wire featuresabright multistrands copper conductors and it supports voltage grade upto 1100V etc complete as per the direction of Engineer-in-Charge.( Make of Cable - Finolex/ L&T / Havels / V Guard/ RR/ KEI)
150
-
91
Supply, installation, testing & commissioning of 5core DMX cable comprises twisted pairs with shield support for carrying of data.DMX 512cable isused for connecting all light consoles that use DMX512 standard data transmission etc complete as per the direction of Engineer-in-Charge.
100
-
88
Supply, installation, testing & commissioning of IP65 "T" power connectors easy and extremely precise locking system.High impact materials-long-lasting and reliable etc complete as per the direction of Engineer-in-Charge.
12
-
996
Supply, installation, testing & commissioning of IP65 "T"DMX connectors having 3/5 polecable connector,Male/Female connector with improved latch,cage type contacts,"solder stop"for easy soldering,and additional ground contact for best contact integrity between chassis and cable connector.More durable housing for maximum reliability etc complete as per the direction of Engineer-in-Charge.
5
-
1659
Supply, installation, testing & commissioning of Power Distribution Board made up of MS Sheet metal fabricated housing blackpowder coated an divery connectors for the internal terminations and external outgoing connecting points,fibre/brass glands of suitable size fitted MCB control for outgoing circuits.- 9 Nos of 6/10A SP Outgoing MCB's.- 1No of 16A TPN Incoming MCB etc complete as per the direction of Engineer-in-Charge.
1
-
25000
Supply, installation, testing & commissioning of waterproof power junction box/powercable terminal box,IP65 made up of rugged,non-corrosive,high impact polycarbonate,moldednylonen cases connectors that use screw compression to secure the wires,protection against waterjets and dust from all directions,includes 5Way min 10A connect or terminal block Max. dimension : 80 * 250 * 85mm etc complete as per the direction of Engineer-in-Charge. Make Hansel or Equivalent
3
-
1201
Supply, installation, testing & commissioning of DMX isolator or splitter provides Isolate do ptical DMX splitter provides 8 outputs from a 1 input and Input voltage:AC 110 to 220V,50Hz,Product features: Group 1 & group 8 DMX signal change etc complete as per the direction of Engineer-in-Charge.
1
-
30000
Supply, installation, testing & commissioning of DmX Controller 12 Faders to controlat least 12channels with master control fader, scene saving option,LCD display,smooth movement faders,easy access keypads,12 Physical Fader unit for direct access,DmX 512 protocol,Incremental Channel Up&Down Buttons,Slow blow safety fuse,optional chase & multifunction keys. Code: LK CX-3 etc complete as per the direction of Engineer-in-Charge.
1
-
80692
Supply, installation, testing & commissioning of additional accessories for installing the lights asper the final drawing/ site condition consisting of clamps, brackets, angles, conduites ,joints,hardwares like fasterners, nut & bolts etc complete as per the direction of Engineer-in-Charge.
1
-
66700
L) 25 KVA SUBSTATION
-
-
-
Construction of 3-ph., 3-wire 11KV line with 9 mtr 300Kg PSC Pole for Pin Point and two nos Cut points with double disc arrangement of 55mm AAAC. (80mtr. Span) including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
0.2
-
316147.39
Supply & fixing of Construction of Double pole Mounted 11/.4KV Sub station using 9mtr. X 300kg long PSC Pole with double disc arrangement for 25KVA Transformer including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
1
-
200414.28
Supply & fixing of Construction of 3-phase 50 sqmm AB Cable on 8mtr x 200Kg PSC Pole for LT line (30mtr. Span) including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
0.2
-
588113.08
Supply & fixing of Barbed wire fencing boundary wall including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
1
-
17140
Providing metal spreading using 40mm metal including all cost of materals, labour, transportation, loading, unloading, T & P & Erection etc complete as per direction of Engineer in Charge.
1
-
10000
M) 25 KVA DG SET
-
-
-
Supply, installation, testing & commissioning of 25 KVA 3 phase Silent DG set with AMF Panel. The DG set must be latest CPCB approved of etc complete with all materials & labour as required as per the direction of Engineer-in-Charge.Make: Jakson / Kirloskar/Ashok leyland
1
-
652530.7
Providing and fixing 25 mm x 5 mm Copper earth strip in surface or in recess as strip electrode for connections etc. as required.and making good the damages caused complete as required and as per direction of Engineer-in-charge
20
-
458.8
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
4
-
5351
N) PATHWAYS & PARKING
-
-
-
Earth work in stoney earth and gravels mixed with stone and boulders not exceeding 0.014 cum in volume within 50m. Initial lead and 1.5m initial lift including rough dressing and beaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per specification approved by the department.
84.8
-
207.9
Supplying and filling with sand in layers not exceeding 300mm depth, well watered and rammed etc. speading in low laying of the work as directed by the Architect/Bank's Engineer/Architect including transporting etc. for complete the job. (Measurement will be taken from consolidated volume only).
42.4
-
725.24
Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and ,es of all materials with all labour, cess and T&P required for the work etc. complete in all respect.
6.5
-
4837.2
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
54
-
1638.1
Providing & fixing precast ,precured Cement Concrete [1: 1.5 :3 ] kerb stone [450 x300x175mm] with graded stone aggregates & fixing in position & pattern as shown in drawing in cement mortar [1cement: 6 coarse sand] & pointing in cement mortar [1cement: 2 coarse sand] including necessary excavation & filling side treanches etc. including cost of all materials, labour, tax, lead, T&P etc. complete in all respects as per the direction of Engineer/ Architect-in-charge.
76.2
-
85.65
Supplying and laying of hydraulically pressed and mechanically compacted free cast interlocking PAVER pavers of 60MM thick of different colour , coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge.
282.6
-
900.9
O) SITE DEVELOPMENT,LAND SCAPING, BEAUTIFICATION & PROMENADE
-
-
-
PLANTER DEVELOPMENT (BOTH SIDE FROM MAIN GATE TO BUILDING AS IN THE DRAWING)
-
-
-
Supply of good earth for filling of planter box size (3ft X2ftX1ft X386=2316)
2316
-
10
Supply of and Planting of IXORA 'RED THAI DWARF’ inthe planter in two rows in a distance of 1.5ft from plant to plant (386 ft X 2 rows) including supply and application of compost, pesitcide etc complete
850
-
60
3TIRE GREEN BELT DEVELOPMENT ALONG THE BOUDARY WALL
-
-
-
Digging of pit (0.6X0.6X0.6M) for all plants
750
-
17.69
Supply, mixing and refefilling of good earth
2500
-
12.12
Supply and mixing manure and pesticide complete
400
-
25
Stake of plants with bamboo stump- 6ft including tie of same
200
-
50
Supply and planting of plant Juniperus /Eugenia-4 to 5 ft Height in 18 x18 inch poly bag size
50
-
400
ficus reginald 5 to 6 ft 18 x18 inch poly bag size
50
-
500
Plumeria alba dwarf 5 to 6 ft 18 x18 inch poly bag size
50
-
400
Supply of fox tail plalm (Wodyetia bifurcata) 6 to 8 ft 18 x18 inch poly bag size
50
-
800
Supply of lagerstroemia indica (chena fula) 4 to 5 ft 10 x10 inch poly bag size
50
-
150
Lawn Development
-
-
-
LAWN DEVELOPMENT:-Preparing Lawn with lawn grass (zoysia japonica-carpet grass) obtained from a healthy and properly maintained the lawn (free from weeds and other foreign materials) and laying on the supplied soil medium with garden soil mixture of farmyard manure, river sand and red earth in appropriate ratio to an average depth of 0.15m, in dibbling method at the distance of 3 to 4 inch as per the location, drawings and specifications provided, including material cost of fertilizer, pestcide,lawngrass etc complete . Area-44700 sqft - including three month maintenance
-
-
-
Excavation of existing land upto 0.5 ft
10000
-
4.8
Supply of good earth
20000
-
10
leveling and dressing , clearing of debrish etc complete
10000
-
1.2
Supply and spreading of sand
7000
-
10
Supply and apply of pesticide contol of termires and othe pests
7000
-
2.2
Supply and laying of zoysia grass /board leaf grass
7000
-
15
Permanent Flower Bed (4.5 X 20 ft 8 N0s) including supply and planting material cost plant(rose/ allmunda/ hibiscus ect flower , fertilizer, pit making and plantation complete.
8
-
2500
Supply and planting of ground cover wedelia/ tradescantia/ zephyranthes lily- 7 ft height in 18 X18 inch poly bag in a pit of 2ft X 2ft X 2ft including material cost plant, fertilizer, pit making and plantation complete.
950
-
40
Supply and fixing of brick (border of planter beds)
20
-
3900
Irrigation though sprinkler system
-
-
-
Supply and fixing of UPVC SH-80 pipes including plumbing , fittings, solvent cement complete with all respect as directed by EIC.
-
-
-
65 mm UPVC SH-80 pipes
50
-
496
50 mm UPVC SH-80 pipes
200
-
384
Supply, fixing and fitting of gear driven pup-up of reputed make HUNTER/Rainbird
20
-
1800
Supply, fixing and fitting of pup-up guard 4 inch SH-80 pipes of reputed make HUNTER/Rainbird
25
-
1048
Supply, fixing and fitting ofscreen filter of 25 mq
1
-
4500
Supply , fixing and fitting of 3hp open well submesible pumpset
1
-
30000
Supply , fixing and fitting of 65 mm gunmetal gate valve 4 nos
2
-
6000
Supply , fixing and fitting of 40 mm air release valve
4
-
1800
Supply , fixing and fitting of valve chamber
4
-
2200
Maintenance for First year
-
-
-
Lawn Maintenance & Watering
-
-
-
Watering Every day for about 8 months leaving Rainy day
2077
-
10
Weeding through out the year
2076
-
5
Mowing Every two months interval
2077
-
15
Maintenance of plants
-
-
-
Watering once a week with about 20 liters of water from first November till 31 st March
950
-
73
Watering once in three days with about 20 liters of water from 1st April to 15 June
918
-
78
Maintenance for Second year
-
-
-
Lawn Maintenance & Watering
-
-
-
Watering Every day for about 8 months leaving Rainy day
3000
-
10
Weeding through out the year
3000
-
5
Mowing Every two months interval
3000
-
15
Maintenance of plants
-
-
-
Watering once a week with about 20 liters of water from first November till 31 st March
800
-
73
Watering once in three days with about 20 liters of water from 1st April to 15 June
800
-
78
FRP
-
-
-
Providing Decorative Ornamental cement plaster like Bamboo/Bullaha/Straw/Plank design as per specification and didection of E.I.C.on structural wall or roof with the plaster is to be made of cement mortar of proportion (1:3) with cement oxide colour or any other approval material including cost,material,conveyance,and labour charges etc.
750
-
220
Consideration of R.C.C. Ornaments three trunk sitting chair 5'0'' length standingon cutting there with back rest as Bullhi or Bumboo design made of R.C.C.(1: 11|2: 3 )with adequate reinforce Cemeta finishing the structure with using Cement oxide paint involving all cost conveyance, royalty & texes of all materials compiled.
12
-
15000
Providing fitting and fixing of FRP Butterfly of average height 8 ft made of resin,accelaretator.catalyst,glass,fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
1
-
66700
Providing fitting and fixing of FRP Deer Family 3 nos of in average height4 ft and of 3 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
1
-
33500
Providing fitting and fixing of FRP Elephant Family 2 nos of in average height 10 ft and of 5 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
1
-
138000
Providing fitting and fixing of FRP Tiger Family 2 nos of in average height 6 ft and of 3 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
1
-
31050
Providing fitting and fixing of FRP Tree with Bird in average height 7 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
1
-
26450
Providing fitting and fixing of FRP Bear 1 nos of in average height 4 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
1
-
20700
Providing fitting and fixing of FRP Dustbin ( Rabbit ) 1 nos of in average height 4 ft made of resin , accelaretator .catalyst, glass, fiber mat/powder etc all cost conveyance, royalty & texes of all materials compiled.
5
-
6670
P) Step and OAT
-
-
-
Providing 20mm thick of above 0.10 Sqm Kota Stone tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
33.75
-
1039.1
Providing 20mm thick of above 0.10 Sqm Kota Stone tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
13.13
-
1124.9
Providing 20mm thick and above 0.40 Each Sqm size granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
11.25
-
2074.6
Providing 20mm thick of above 0.40 Sqm granite tile dado of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
4.38
-
2082.7
Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and , cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
25
-
237.6
Providing 20-30 mm thick fine dressed sand stone flooring ) of approved quality, colour on 12mmm thick cement plaster (1:3) with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.
11.25
-
1432
Providing 20-30 mm thick fine dressed sand stone dado/skirting , riser of steps of approved quality, colour on 12mmm thick cement plaster (1:3) with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.
4.38
-
1432
Providing edge moulding to 18 mm thick Red Colour Sand stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
25
-
237.6
Site Cleaning
-
-
-
Cleaning & grubbing road land including uprooting rank vegetation ,grass bushes ,shrubs,saplings & trees girth up to 300mm ,removal of stumps of trees cut earlier & disposal of unserviceable material & &stacking of serviceable material to be used or auctioned ,up to a lead of 1000meters including removal & disposal of top organic soil not exceeding 150mm in thickness
500
-
5.8
Cuttick of trees,including cutting of trunks ,branches & removal of stumps ,roots stacking of serviceaable material with all lifts & up to a lead of 1000meters & earth filling in the depression /pit.
500
-
64.7
Q) SIGNAGES
-
-
-
Fabrication, supply and fixing of informatory retro reflective signboards using super high efficiency, TYPE XI sheeting as per IRF 67-2012 Code with white color bonded on to 3mm Aluminium Composite panel (0.25+3.50+0.25 -PVCF coated) cover which alphabets and unberals are reverse cut made using Electro cut able film with comuterized cuttng plotter/DIGITAL PRINTING SYSTEM the board shall be provided with frame mode out of stainless steel pipes of 304 grade. it shall be maunted on vertical posts made out of 80mm NB Stainless pipe including necessary excavation for M-20 foundations concreting/reveling, etc necessary for fixing fo the board and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading and unloading charges all taxes etc complete in all respect as per specification & direction of Engineer-in-Charge.
-
-
-
a) Required retro reflective boards of white, yellow, green, blue , brwon colour with necessary signage as per specification & direction of Enginner-in-charge
-
-
-
New board -15x6'-0"x4'-0"=
600
-
470
Required stainless stell frame of 80mm NB made out of 304 grade steel pipe including cost, all taxes , transportation complete as per specification & direction of Engineer-in-Charge. 35Kg per Signage
-
-
-
15x35kg
875
-
400
Providing and laying plain cement concrete of proportion (1:2:4) in foundation and floors using Portland slag cement (PSC) with 12mm size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleared including hoisting, lowering, laying corncrete, ramming, watering and curing etc complete to required levels laid in layers not cxceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalities an dtaxed all materials and cost of all labours, sundries T&P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specifiation and direction of Engineer-in-Chrge. (0.45x0.45x0.63 = 0.1275) x2= 0.255 Cum Per Nos
-
-
-
15x0.255=
6.37
-
6163.8
R) PHOTOGRAPHY ZONE
-
-
-
Earthwork in excavation of foundation trenches in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.
6.07
-
207.9
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
2.43
-
115.5
Supplying and filling in foundation trenches and plinth, ditches with sand well-watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only).
32.44
-
725.24
Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.
8.66
-
4837.2
Brick work in foundation and plinth with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.
7.2
-
4028.1
Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.
20.44
-
142.9
Supplying and laying of heavy duty factory made hydraulically pressed and mechanically compacted pre-cast interlocking pavers of 60mm thick, preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge.
28.44
-
620
Providing and Fixing white fiber made Selfie point (Buddhist Sculpture of 4 feet height ) as per design and specification with stone statue buddha on it as per the direction of The architect
1
-
125000
Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
24
-
2061.7
Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
16.8
-
2075.2
Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
28
-
237.6
BOUNDARY WALL & ENTRANCE GATE
-
-
-
Earth work in excavation in all kinds of soil (Ordinary, hard soil & stoney earth soil ) for foundation trenches within 50m. Initial lead and 1.5m initial lift including rough dressing and beaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per specification approved by the department
60.48
-
207.9
Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only).
7.56
-
725.24
Providing & laying Plain Cement concrete (PCC ) of proportion (1:4:8) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect.
5.04
-
4474.7
R.C.C. work of Grade- M 25 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S./TMT/HYSD rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position, centering & shuttering
-
-
-
Foundation and Column Base
12.6
-
5529.2
Plinth beam
7.5
-
5966.2
Column & Beam
3.94
-
11188.3
Lintel
4.5
-
9119
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. lifting and placing in position as per design complete including cost of bars , binding wires , including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants, etc. complete as per the direction of the Engineer-in-charge. (linear measurement will be taken and quantity will be calculated on standard weight for all heights)-Thermo Mechanically Treated bars
26.92
-
8959.1
Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), for foundation & plinth with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.
22.5
-
4028.1
Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), for superstructure with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.
52.5
-
4061.4
Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
210
-
218.7
Providing 12mm thick C.P. 1:6 finished even and smooth on masonry walls including racking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and levels and providing grooves as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, taxes, royalty, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.
210
-
142.9
Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
380
-
129.6
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
1200
-
82.43
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
24
-
189
T) SOLID WASTE MANAGEMENT
-
-
-
Earth work in excavation in all kinds of soil (Ordinary, hard soil & stoney earth soil ) for foundation trenches within 50m. Initial lead and 1.5m initial lift including rough dressing and beaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per specification approved by the department.
11.49
-
207.9
Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge
7.66
-
398.8
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
7.66
-
115.5
Disposal of excess earth by mechanical means / manually up to 5 km distance including cost of loading, unloading, transporting & spreading to a level surface complete in all respects including cost of all labour, tools & plant etc. to complete the work
-
-
-
Upto 5 KM
11.49
-
173.8
Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only).
-
-
-
GROUND FLOOR
23.78
-
725.24
Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect.
2.6
-
4837.2
R.C.C. work of Grade- M 25 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S./TMT/HYSD rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position, centering & shuttering
-
-
-
GROUND FLOOR
-
-
-
Footing
1.53
-
5529.2
Pedestal & Column
0.99
-
11188.3
Plinth Beam
0.9
-
5966.2
Lintel
0.19
-
9119
Chajja, loft, kitchen platform , fins & sill slab
1.8
-
824.6
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. lifting and placing in position as per design complete including cost of bars , binding wires , including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants, etc. complete as per the direction of the Engineer-in-charge. (linear measurement will be taken and quantity will be calculated on standard weight for all heights)-Thermo Mechanically Treated bars
4.62
-
8959.1
Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.
-
-
-
Foundation & Plinth
3.41
-
4028.1
Superstructure
7.04
-
4061.4
Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.
33.01
-
218.7
Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge.
4.39
-
156.9
Providing 12mm thick C.P. 1:6 finished even and smooth on masonry walls including racking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and levels and providing grooves as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, taxes, royalty, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.
47.84
-
142.9
Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
9
-
954.6
Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in dado/skirting , riser of steps in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
1.8
-
1055.6
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
163.35
-
82.43
Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour, T&P etc. complete.
37.41
-
72.3
Providing and painting two coats with plastic emulsion paint of (Nerolac/ Asian/ Berger/ Dulox or equivalent make) approved quality and approved shade over coat of primer of approved quality in all floors at all height by making the surface to the interior plastered surface over a coat primer with water bond cement primer of approved quality including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.
37.41
-
135.9
Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
47.84
-
129.6
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
5.45
-
189
Providing and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment and creating a chemical barrier under and all-around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, surrounding of pipes and conduits etc. complete (plinth area of the building at GROUND FLOOR only shall be measured) as per drawing, design and direction of Engineer-in-charge. (Chloropyrifos emulsifiable concentrate 1.0%)
26.07
-
75
Providing ,fitting and fixing of Iron work wrought and put up in trusses Steel Struss (With M.S. Pipe) with supporting,straps,jointing materials etc including cost of all materias , labour and machinaries, T&P etc.complete in all respect.
388.8
-
102.17
Providing ,fitting and fixing of plain formed TATA BLUESCOPE standard back coat coloured in standard length at 3000mm with supporting,straps,jointing materials etc including cost of all materias , labour and machinaries, T&P etc.complete in all respect.
12.96
-
824
Supply, Installation, testing & commissioning of 25 - 50kg Capacity ORCOMIN Machine.
1
-
470000
All Electrical Connection, Panel Board, Cables as per requirement.
1
-
40000
Consumables like Bioculum used as Digester, Sanitreat used for Odour control and Coir / Saw Dust used as Absorber for a period of 1 year from the date of handing over of machine.
1
-
120000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements