Odisha Tourism Development Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 84,380Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_OTDC_49128_1Bid Award Id
ViewTender No
BP -I/10/2018-19 dt. 27.08..2018Tender Authority
Odisha Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://http://www.otdc.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
40mm thick grading concrete of (1:2:4) on roof slab with 12mm & down grade crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned, free from debrises and silt including hoisting, lowering and laying concrete in all floors at all height after chipping, chiseling and cleaning the entire roof surface by using wire brush, finished smooth to proper required slope and gradient with watering and curing, including cost, conveyance, royalties, loading, unloading and taxes of all materials, cost of laour, T & P, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge..
129.14
62103
480.9
... More
Providing and applying two coats of Sika Top Seal 109HI compound @2.25Kg/Sqm over roof slab and parapets i.e. One coat of 109 HI Sika top seal on cleaned surface, laid with Sika Fab - I (glass fibre net) and in top layer another coat of Sika Top Seal 109HI for water proofing, including cost, conveyance of all materials, sundries, T & P, all labour etc. complete as per direction of Engineer-in-charge.
402.73
261774
650
... More
20 mm. thick design cement plaster in cement mortar (1:4) finished smooth to roof top & walls including watering & curing with cost, conveyance, royalties, loading, unloading and taxes of all materials and cost of all labour, T&P, sundries, scaffolding etc. required for the work as directed by the Engineer-in-Charge.
273.59
104292
381.2
... More
Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
4.39
15519
3535.1
... More
Providing and lying plain cement concrete of proportion (1:2:4) in foundation and floors (i.e below the base course of tile flooring) using Portland slag cement (PSC) with 12 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge.
4.39
22270
5073
... More
Providing, lifting, hoisting and laying Reinforced cement concrete of M-200 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
... More
Column Base
0.63
2859
4538.4
... More
Beam & Column
0.81
7131
8804.1
... More
Providing, fixing and placing of MS bars/ Tor steel (HYSD) Fe-500 for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost
207.38
1276672
6156.2
... More
Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
2.63
8913
3389
... More
Providing Fly Ash Brick masonry using fly ash brick of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
6.73
23030
3422
... More
First Floor
8.19
29508
3603
... More
Providing 16mm thick cement plaster in all floors at all height (inside) with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
55.8
8118
145.5
... More
First Floor
39.6
5892
148.8
... More
Providing 12mm. thick cement plaster with cement mortar of mix (1:6) in all floors (inside) with Portland slag cement (PSC) with neat cement punning and two coats of bitumen painting over top of the walls complete including watering and curing along with the cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as directed by the Engineer–in-Charge.
-
-
-
... More
Ground Floor
55.8
5713
102.4
... More
First Floor
39.6
4142
104.6
... More
Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning to all R.C.C surface including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.
179.8
20281
112.8
... More
Providing vitrified tile flooring using vitrified tiles of premium grade having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured / printed series (homogeneous) of approved quality, colour of Somany/RAK/Asian/Johnson or equivalent in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
72
63561
882.8
... More
Supplying, fitting and fixing of vitrified tiles of premium grade having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured / printed series(homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge.
15
13005
867
... More
Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.
10
22897
2289.7
... More
Providing 30cmx30cm/ 40cmx40cm size special plain/printed series ceramic floor tiles of premium grade of Kajaria Serie rectificado / Somany matt series / Asian royale series / Johnson or equivalent having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and with ordinary Portland slag cement (PSC) grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge.
92.25
67859
735.6
... More
Providing 30cmx45cm size special plain/printed series edge cut ceramic wall tiles of premium grade of Kajaria power line / Somany gold / Asian impression / Johnson or equivalent having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge.
356.54
374687
1050.9
... More
Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wall smooth with a coat of plaster pairs including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
1364.1
218665
160.3
... More
Painting to external surface of building with two coats of weather coat of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
-
-
-
... More
Ground Floor
732.07
68668
93.8
... More
First Floor
275.2
26364
95.8
... More
Supplying, fitting and fixing well dressed and well seasoned sal wood choukaths of different length and 6.35cm. x 12.70cm. sizes in all floors in proper position including two coats of coaltaring to wall and lintel side faces of choukaths including cost of coaltar and labour for coaltaring and fixing required nos. of W.I. clamps to the choukaths with approved qualities of screws including cost, conveyance, loading, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge but excluding the cost of W.I. clamps.
0.25
11682
46729.4
... More
Supplying fitting and fixing in position flush door shutter of 32mm thick of Green / Mayur / Aeon or equivalent with 1mm sun mica (Royal touch) of approved quality and as per drawing & design with all necessary brass fittings, door closer (godrej, heavy duty) motrice lock (godrej heavy duty),handle, door stopper etc including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer –in-charge.
27.3
188970
6922
... More
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
905.86
65312
72.1
... More
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on wood work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
56.9
5371
94.4
... More
Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
67.32
9081
134.9
... More
Providing and fixing factory made UPVC frame with shutter for windows made of UPVC extruded section having an overall dimension, as below (tolerance ± 1mm) with all thickness 2mm ± 0.2mm .Corners of the door frame to be jointed with galvanized brackets and stainless steel screws, jointed and mired and plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S tube of size 19mmx19mm and 1mm ± 0.1mm wall thickness and 3 no stainless steel hinges fixed to the frame complete as per manufacture specification and direction of Engineer in charge.(Extruded section profile size 42x50mm) :(MAKE : FENESTA, LG etc.) complete in all respect as directed by the Engineer-in-charge.
67.68
490815
7252
... More
Supplying, fitting and fixing of factory made single rigid FRP composite door shutter of 32mm thick laminated with GRP skins with wood grain finished fabricated using UV stabilized Isenthalpic gal coat and one layer of 450 gsm E- glass Chopped strand mat (CSM) impregnated with orthopathalic, polyester resin including fitting of fixtures like hinges, tower bolt, handle aldrop etc. with cost, conveyance and taxes of all materials and labour etc. complete.
17.33
56739
3275
... More
Supplying, fitting and fixing of FRP Door Frame of size 75mmx100mm of approved quality including drilling holes in masonry wall with cost of all materials, rawlplug , screws and other required fittings with cost of all materials, all taxes, labour T & P etc complete as per specification and direction of Engineer –in-charge.
54.45
27214
499.8
... More
Dismantling & removing doors,window & ventilatots including removal of frame ,hinges ,fastening & stacking the same for reuse & removing the debris within 50m lead including cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
103.67
22745
219.4
... More
Scraping of old paint by the scraper & removing the debris within 50m lead including cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
1782.22
6237
3.5
... More
Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead including cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
30.87
24155
782.5
... More
Labour for spreading moorum and consolidation with HRR including watering including cost and conveyance of moorum including cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
45
49882
1108.5
... More
Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead including cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
10.52
4384
416.8
... More
Dismantling and removing R.C.C. columns, beams, slab, staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50m lead including cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.
8.6
7021
816.4
... More
PATHWAY
-
-
-
... More
Earthwork in excavation of foundation trenches in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.
235.95
34920
148
... More
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only).
100.65
48010
477
... More
Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
97.35
344141
3535.1
... More
Providing and lying plain cement concrete of proportion (1:2:4) in foundation and floors (i.e below the base course of tile flooring) using Portland slag cement (PSC) with 12 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge.
93.5
474325
5073
... More
Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning to all R.C.C surface including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.
187
21093
112.8
... More
Supplying, fitting and fixing in position 25mm thick CEMENT CONCRETE TILE (EUROCON/ULTRA) of approved quality, colour and size in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and with Portland Slag Cement (PSC) grouted with neat white cement slurry with required quantities of pigments of approved marks watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as directed by the Engineer-in-charge
605
602761
996.3
... More
BOUNDARY WALL
-
-
-
... More
Providing, lifting, hoisting and laying of M-200 grade RCC in Column as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
4.59
40410
8804.1
... More
Providing, fixing and placing of MS bars/ Tor steel (HYSD) Fe-500 for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost
5.28
32504
6156.2
... More
Providing 6mm thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning to all R.C.C surface including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.
75.42
8507
112.8
... More
Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
4866.21
350853
72.1
... More
Painting to external surface of building with two coats of weather coat of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
892.96
83759
93.8
... More
PH
-
-
-
... More
Supplying all materials , labours , taxes and tools and plants for fitting and fixing of CPVC pipes of 100% lead free and conforming to ASTM F442 Specific-2 CPVC(Make-AJAYA /ASTRAL/ASHIRBAD /Equivalent) with good quality including fittings and laying as per the site requirement etc., all complete including testing as per the direction and specification of Engineer-in-charge.
-
-
-
... More
20mm dia
85
14382
169.2
... More
25mm dia
65
14163
217.9
... More
32mm dia
32
10099
315.6
... More
40mm dia
25
10797
431.9
... More
50mm dia
15
9808
653.9
... More
Providing all materials, labour, T&P for fitting & fixing of following water supply fittings confirming to IS-15778 with ISI mark as per ASTM D-2846 & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of all taxes,duties,transportation scaffolding etc. all complete as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHRIVAD/AJAYA/SUPREME
-
-
-
... More
25mm dia CPVC ball valve
2
491
245.9
... More
32mm dia CPVC ball valve
1
405
405.6
... More
40mm dia CPVC ball valve
1
529
529.1
... More
Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of materials, curing, conveyance, taxes of all materials etc. all complete as per specification & direction of EIC.
100
12700
127
... More
Providing all labour,T&P for cutting holes in bricks or stone masonry wall for taking pipes and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, taxes, duties etc. all complete as per specification & direction of Engineer-in-charge. (For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall)
7
224
32.1
... More
Providing all labour,T&P and cutting holes in RCC chajja/roof/floor for taking pipes through and making good the damages with supply of all required materials etc. complete as per the direction of the Engineer-in-charge.
11
1184
107.7
... More
Providing all materials, labour & T&P for fitting and fixing of white glazed vitreous china water closet Squirting Pan (600mmx350mmx10mm) of Hindware Cat. No. 60003 as per IS-2556 with ISI mark fixing on the floor with cement concrete 1:2:4 for fitting the closet etc. all respect in all floors including cost, conveyance and taxes of all materials etc. all complete as per specification and as per direction of EIC.
11
28161
2560.1
... More
Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china water closet (European pattern) with seat cover (solid) of approved make in all floor including supply & fixing of rack bolt with CED plated stud etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make : HINDWARE Coupled closet - Cat. No. 20024 & 21038
11
126562
11505.7
... More
Supply all materials and labour for fitting and fixing of following size white glazed vitreous china wash hand basin with pedestal of approved make as per IS-2556 with ISI mark in all floor with supply & fixing of basin bolts & Nut of approved quality including cutting the walls & floor and making good the damages including testing with all taxes, duties, transportation etc. all complete as per specification & direction of EIC. Make: HINDWARE- Basin - 10087, Pedestal - 11003
11
56040
5094.6
... More
Supply all materials, labour & T&P for fitting and fixing of following sizes of white glazed vitreous china flat back large urinal with spreder, connection pipe & waste pipe confirming to specification of approved make as per IS-2556 with ISI mark in all floor along with supply & fixing of necessary component parts like pair of C.I./M.S. bracket including connection from existing water supply pipe line & testing the same with all taxes, duties, transportation etc. all complete as per specification & direction of the Engineer-in-charge. (Make:HINDWARE-60002)
4
23014
5753.5
... More
Providing all materials, labour, T&P for fixing of following sizes of bevelled edge mirror of 5mm thick mounted on 4mm thick AC sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C.
12
8077
673.1
... More
Providing all materials, labour,T&P and fittings and fixing of different water supply of CP fittings as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in-charge.
-
-
-
... More
15mm dia Short Body Bibcock with wall flange (KUP-35037PM of Jaquar)
12
19137
1594.8
... More
15mm dia Angle Stop cock with wall flange (KUP-35653PM of Jaquar)
20
27178
1358.9
... More
15mm dia Pillar cock (KUP-35001PM of Jaquar)
11
19129
1739
... More
Single Lever Basin Mixer without Pop-up waste with 450mm long braided hoses (KUP-35011BPM of Jaquar)
11
55438
5039.9
... More
Angle Cock Auto closing system for urinal with CP connection pipe ( PRS-077 of Jaquar)
4
7686
1921.6
... More
O.H. Shower of size 100mm dia with Shower Arm 20mm dia x 450mm long & Wall Flange. (As per Cat. No. OHS-1989 & SHA-477 respectively of Jaquar)
11
19237
1748.9
... More
C.P. Soap Dish Holder ( Cat. No. AKP-35731P of Jaquar)
11
11414
1037.7
... More
Towel Ring Square with round flange ( Cat. No. ACN-1121N of Jaquar)
11
9319
847.2
... More
CP Towel Rail of 600mm long ( Cat. No. AKP-35711P of Jaquar)
11
24409
2219
... More
600mm long Glass Self (AKP-35771P of Jaquar)
11
16028
1457.1
... More
Health Faucet with 1.20m longflexible tube & wall hook (Cat. No. ALD-573 of Jaquar)
11
14798
1345.3
... More
15mm dia sink cock (Cat. No. CON-347KN of Jaquar)
2
2668
1334.1
... More
C.P. Toilet paper holder with flap (Cat No. ACN-1153N of Jaquar)
11
11891
1081
... More
15mmx50mm C.P. Extension piece (Make-Viking)
20
3332
166.6
... More
Conceal Stop Cock (KUP-35083KPM + ALD- 083 of Jaquar)
20
37524
1876.2
... More
2 Way Bib Cock (KUP-35041PM of Jaquar)
11
20249
1840.9
... More
Supply all materials, labour, T&P, fitting and fixing of uPVC SWR (Ringfit) Pipes (Type-A) of approved make confirming to IS-13592/1992 with ISI mark, both below & above ground level or fixing on wall surface in all floors including excavation of earth work in all kinds of soil & necessary back filling or required scaffolding with all taxes, duties, transportation including testing etc. all complete as per specification & direction of the EIC. Make:ASTRAL/ASHRIVAD/AJAYA/SUPREME
-
-
-
... More
110mm dia pipe
130
34437
264.9
... More
75mm dia pipe
15
2407
160.5
... More
Supplying all materials, labour, T&P, fitting and fixing of following dia uPVC SWR (Ringfit) fittings of approved make confirming to IS-14735 with ISI mark with all taxes, duties, transportation & requisite testing as per specification & direction of EIC. Make:ASTRAL/ASHRIVAD/AJAYA/SUPREME
-
-
-
... More
125mm x110mm P-Trap with lip ring
7
3366
480.9
... More
110mmx110mm 'P' Trap
4
1068
267.2
... More
110mmx75mm Nahani Trap
2
318
159.3
... More
110mm Multifloor Trap
2
339
169.8
... More
110mmx87.5º Plane bend
18
2532
140.7
... More
110mmx87.5º door bend
10
1628
162.8
... More
110mmx45º Plane Bend
10
1314
131.4
... More
110mm Single Tee with Door
10
2231
223.1
... More
110mm Double Tee with Door
5
2242
448.4
... More
110mm dia single 'Y'
5
1202
240.5
... More
110mm WC connector/Bend with lip ring
2
393
196.5
... More
110x75mm Reducer
2
230
115.1
... More
110mm dia Vent cowl
12
628
52.4
... More
PVC Clamp Suitable for 110mm dia pipe
80
5952
74.4
... More
Providing all materials, labour, T&P for fitting & fixing of Stainless Steel Kitchen Sink of overal size-535 x 460 x 200mm Make-NIRALI (Grace Delux) of popular range, satin made out of 0.8mm thick sheet with coupling & strainer, the flat boards for correct sandwitch between the platform top & granite/marble slab & making good the damages, fixing of 32mm dia PVC waste pipe etc. including testing, commissing all complete as per specification & direction of the Engineer-in-Charge.
2
10749
5374.8
... More
Providing, fitting, fixing including testing & commissioning of 2000 Ltr. capacity of Sintex double layer polyethylene moulded water storage cylindrical tank with lid & locking arrangement as per IS-12701/1996 with ISI mark including cutting holes of required size & shape. Providing, fitting and fixing of CPVC water tank connector / Adaptor with jam nut etc. for filling, delivery, overflow & wash out arrangements, including hoisting upto a height of 10 mtr. above the ground level & placing the tank of required position including construction of brick masonry pedestal up to 450mm ht. from roof with RCC (M-20) base slab, beam of approved design & 125mm thick brick masonry wall up to 2/3 ht.of tank (all round) in C.M. 1:4, 12mm C.P. 1:4 over brick work etc. all complete as per specification & direction of EIC.
2
33003
16501.5
... More
Providing all material, labour, T&P and construction of Gully Trap chamber of size 300mmx300mmx450mm with 250mm nominal size flyash Brick having crushing strength not less than 75kg/ sqcm in CM 1:4 over a bed of 100mm thick C.C. (1:3:6) using 40mm size HG metal, plastering with 12mm thick cement plaster with cement punning in cement mortar 1:4 on inner surface and 12mm thick cement plaster in cement mortar (1:4) on external surface,fitting & fixing of PVC Gully Trap and pre-cast factory made (SFRC) cover with frame of opening size 260mmx260mm, moulding and shaping the channel & benching with C.C (1:2:4) with hard granite chips 12mm size, earth work excavation in all kinds of soil & rock and filling the cavity of the chamber with excavated & selected earth levelling the surface around the chamber with disposal of surplus earth within 50mt lead as per specification, design & drawing including cost of curing and all taxes, royalty, cost, conveyance etc. all complete as per specification & direction of EIC.
5
9195
1839
... More
Providing all materials required for construction of inspection chamber of size 750mm x 750mm x 500mm depth with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 100mm thick, 12mm thick cement plaster 1:3 both in outer & inner surface of the wall & bottom, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed. RCC M-20 with 20mm & down size H.G crusher broken chips having minimum cube strength 200Kg/Sqcm at 28 days confirming to IS-453/76 & IS-3370 for roof slab of 125mm average thick with form work as per the requied size including cost for MS reinforcement as per approved design & drawing & fixing of Pre-cast factory made manhole cover with frame (SFRC medium duty) for opening of 500mm including cost of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge.
6
49518
8253
... More
Septic Tank
-
-
-
... More
Earthwork in excavation of foundation trenches in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.
35.61
5270
148
... More
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
23.74
1951
82.2
... More
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only).
2.02
963
477
... More
Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
3.45
12196
3535.1
... More
Providing, lifting, hoisting and laying Reinforced cement concrete of M-200 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
... More
Roof Slab
1.65
13007
7883.1
... More
Wall
0.13
1000
7698.8
... More
Providing, fixing and placing of MS bars/ Tor steel (HYSD) Fe-500 for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost
1.52
9357
6156.2
... More
Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
10.14
34364
3389
... More
Providing 12mm. thick cement plaster with cement mortar of mix (1:4) in all floors with Portland slag cement (PSC) with neat cement punning and two coats of bitumen painting over top of the walls complete including watering and curing along with the cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as directed by the Engineer–in-Charge.
8.96
1074
119.9
... More
Making MS step iron in 20mm diameter MS steel bars and fixing into walls of Manhole duly embedded in cement concrete (1:3:6) complete as per specification
11
2233
203
... More
Supplying all materials,labours,T&P and constructing inspection chamber/manhole of 1200mmx900mmx900mm with cement concrete (1:3:6) on bed with hard granite metal size 40mm of 150mm thick and flyash brickwork in cement mortar (1:4) in foundation and plinth, 150mm thick RCC M25 cover slab with supplying fitting and fixing of medium duty SFRC manhole cover, moulding and shaping the channel and benching with cement concrete (1:2:4) using 12mm size hg chips,12mm thick cement plaster in cement mortar (1:3) with punning to inside, cement plaster in CM (1:3) to outside the chamber including centring, shuttering, providing required quantity of MS rods and binding wires for reinforcement, bending, binding, tying the grills and placing in the proper position and drawing and design and PH specification including cost, conveyance, royalty, taxes etc for all materials all complete as per the drawing, design and direction of Engineer-in-charge.
2
26563
13281.5
... More
Electrical Works
-
-
-
... More
Recessed Wiring to light/Fan/Exhaust Fan point in 5/8" or 3/4"dia. Good quality PVC pipe with 1.5 sq.mm PVC insulated Cu.wire (2 run) & 1.0 sq.mm PVC insulated Cu.wire (1 run) for running earth complete with 1 no .6Amp.1way plate type Modular switch, (Polycarbonate) and G.I box of adequate size including PVC bend, saddle, elbow, etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard/RR )
-
-
-
... More
Group -A
25
13492
539.7
... More
Group -B
35
24743
706.95
... More
Group -C
45
41413
920.3
... More
Two way control point
30
30694
1023.15
... More
Recessed Wiring to Call bell point in 3/4"dia. Good quality PVC pipe with 1.5 sq.mm PVC insulated Cu.wire (2 run) & 1.0 sq.mm PVC insulated Cu.wire (1 run) for running earth complete with 1 no .bell push Modular type switch, (Polycarbonate) and G.I box of adequate size including PVC bend, saddle, elbow, etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard/RR )
12
8971
747.6
... More
Supply & fixing of Modular type call bell Buzer and G.I box of adequate size including PVC bend, saddle, elbow, etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard/RR )
12
4200
350
... More
Supply and fixing of 6A modular switch & socket outlet complete with 1 no of 240 volt 6 amp 5 pin universal round/flat pin combined shuttered socket outlet & 1 no. of 240 volt 6 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metal box including mosaic white cover plate of approved make with all other accessories etc. as required complete as per the direction of Engineer-in-Charge. ( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand )
40
18632
465.8
... More
Supply and fixing of 6A modular switch & socket outlet complete with 2 no of 240 volt 6 amp 5 pin universal round/flat pin combined shuttered socket outlet & 2 no. of 240 volt 6 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metal box including mosaic white cover plate of approved make with all other accessories etc. as required complete as per the direction of Engineer-in-Charge. ( Make of Switch & Socket - L&T / Anchor roma / Havells / Legrand )
15
10762
717.5
... More
Supply and fixing of key tag switch board in 3 module recessed zinc chromate passivated flush metal box including mosaic white cover plate of approved make with all other accessories etc. as required complete as per the direction of Engineer-in-Charge. ( Make of Switch & Socket - L&T / Anchor roma / Havells / Legrand )
10
8016
801.6
... More
Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copperconductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch ,phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVCinsulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex /L&T / Anchor / Havels / V Guard/RR )
16
10261
641.35
... More
Supply and fixing of 16A modular switch & socket outlet complete with 1 no of 240 volt 16 amp 5 pin universal round/flat pin combined shuttered socket outlet & 240 volt 16 amp control switch mounted on modular grid plate, all housed in a 3 module recessed zinc chromate passivated flush metal box including mosaic white cover plate of approved make with all other accessories etc. as required. as per the direction of Engineer-in-Charge.( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand )
15
9250
616.7
... More
Supply and fixing of capacitor switching circuit,works at 120 to 280 volts,Heavy duty, Noiseless 100W step type Fan regulator complete with all other necessary materials & labour.( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand )
20
9458
472.9
... More
Supplying and fixing of metal box of 32A D.P modular switch on surface or in recess with 2 Madular metal box with cover in front including providing and fixing , connection etc as required as per the direction of Engineer-in-Charge.
14
5386
384.75
... More
Supplying and fixing of metal box of 20A modular socket on surface or in recess with 2 Madular metal box with cover in front including providing and fixing , connection etc as required as per the direction of Engineer-in-Charge.
12
6492
541
... More
Supply and fixing of TV antenna Socket outlet completely providing 1 no. of TV antenna socket & Top , moulded case metal box & plate of adequate size including PVC bend, saddle, elbow, etc. & other necessary materials & labour complete as per the direction of Engineer-in-Charge. complete as per the direction of Engineer-in-Charge.( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand )
11
3489
317.2
... More
Supply and fixing of Telephone point completely providing 1 no.of telephone socket & Top, Metal plate made of polycarbonate moulded case metal box with metal plate of adequate size including PVC bend, saddle, elbow etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge.complete as per the direction of Engineer-in-Charge. ( Make of Switch & Socket - L&T / Anchor roma / Havels / Legrand )
11
3135
285
... More
Circuit or Sub-main wiring in 20/25/32mm dia. good quality ISI mark PVC Conduit with following sizes PVC insulated un-sheathed Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard/RR )
-
-
-
... More
(2 x 1.5 + 1 x 1.0) sq.mm copper wire
180
18657
103.65
... More
(2 x 2.5 + 1 x 1.5) sq.mm copper wire
680
82280
121
... More
(2 x 4 + 1 x 2.5) sq.mm copper wire
350
49927
142.65
... More
(2 x 6 + 1 x 2.5) sq.mm copper wire
350
63210
180.6
... More
(4 x 4+1x2.5 ) sq.mm copper wire
90
20092
223.25
... More
(4 x 10+1x4.0 ) sq.mm copper wire
90
37836
420.4
... More
0.5mm 2 pair telephone wire
250
17362
69.45
... More
RJ-6 Coaxial TV wire
250
17687
70.75
... More
Supply & fixing of Telephone junction etc as required complete as per the direction of Engineer-in-Charge.
2
4400
2200
... More
Supply & fixing of 12 way,single pole and Neutral, sheet steel MCB double door distribution box complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate includingcommissioning including all other materials etc. as required.( Make L&T / Anchor / Havels /Standard/ Legrand)
2
4071
2035.9
... More
Supply & fixing of 3 ph. 4 way, triple pole and Neutral, sheet steel MCB double door distribution box complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate includingcommissioning including all other materials etc. as required.( Make L&T / Anchor / Havels /Standard/ Legrand)
2
4655
2327.6
... More
Supply and fixing of 5 amp to 32 amp rating 240 V "B" series single pole miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.( Make L&T / Anchor / Havels /Standard/ Legrand)
48
6192
129
... More
Supply and fixing of 63 amp TNP miniature circuit breaker suitable for inductive loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.( Make L&T / Anchor / Havels /Standard/ Legrand)
2
4845
2422.7
... More
Supply and fixing of 40 amp TNP miniature circuit breaker suitable for inductive loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.( Make L&T / Anchor / Havels /Standard/ Legrand)
2
2724
1362.45
... More
Supply, Testing & commissioning of 2 meter Electrode chemical earthing with 58mm G.I galvanized electrode and 25 x 3mm G.I inner strip with 50x 6mm copper connecting terminal with 2 bag of BFC (50Kg) of chemical earthing size of chemical earth bar 2 mtr size of earth feet 3’ x 2’ x 9’ chemical compound to be used 50K.g. including all cost of materials, labour, transportation, loading, unloading, T & P etc. complete as directed by the Engineer-in-charge.
2
40180
20090
... More
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe with charcole / coke and salt etc. as required as per the direction of Engineer-in-Charge.
1
5860
5860
... More
Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below grond level as strip earth electrode including soldering etc. as required as per the direction of Engineer-in-Charge.
20
1700
85
... More
Supply, Installation, Testing, and commissioning of ventilating Exhaust fan 2000mm dia suitable to work on 230/250 volts, 50HZ complete with mounting frame and louvers including making the hole to suit the size of above fan, making good the damage, connections, with 1.5 sq.mm PVC insulated, copper conductor, single core cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Havells Ventile Air/Bajaj/Crompton or Equivalent)
10
19614
1961.45
... More
Supply, Installation, Testing, and commissioning of 450mm 900 rpm heavy duty exhaust fan suitable to work on 230/250 volts, 50HZ complete with mounting frame and louvers including making the hole to suit the size of above fan, making good the damage, connections, with 1.5 sq.mm PVC insulated, copper conductor, single core cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge..(Havells Ventile Air/Bajaj/Crompton or Equivalent). Make Havells / Bajaj /Crompton
1
5757
5757
... More
Supply, Installation, Testing, and commissioning of decorative ceiling fan 1200 mm sweep 230/250 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy, rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Model-SS 390 Havells / Bajaj /Crompton or Equivalent)
18
53067
2948.2
... More
Supply, Installation, Testing, and commissioning of decorative wall fan of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Model-SS 390 Havells / Bajaj /Crompton or Equivalent)
2
5714
2857
... More
Supply, Installation,Testing & commissioning of Surface mounting 18 W LED tube light fitting including luminairs of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells Model-E - Lite LED/ Bajaj /Phillips/Wipro or Equivalent)
25
20725
829
... More
Supply, Installation,Testing & commissioning of Surface mounting 8 W LED tube light fitting including luminairs of approved make complete with all materials & labour.(Make : Havells Model-E - Lite LED or Equivalent)
16
11056
691
... More
Supply, Installation,Testing & commissioning of Recessed mounted 6 watt LED spot light luminaries of 3000K suitable for indoor applications of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
12
16161
1346.8
... More
Supply, Installation,Testing & commissioning of Flexible 24W LED strip 5 mtr long with wide viewing angle for good light distribution & IP20 protection, linkable and easy to install, complete with separate replaceable electronic driver approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make : Havells / Bajaj /Phillips/Wipro or Equivalent)
4
10318
2579.5
... More
Supply, Installation,Testing & commissioning of Surface mounted Decorative Celing/Wall mounted 12 watt LED luminaries of 6000K suitable for indoor applications of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.. (Make : Havells Model-Pecock/ Bajaj /Phillips/Wipro or Equivalent)
8
15116
1889.5
... More
Supply, Installation,Testing & commissioning of Surface mounting 10 W LED bulb fitting of approved make complete with all materials & labour.(Make : Havells / Bajaj /Phillips or Equivalent )
10
4750
475
... More
Supply, Installation,Testing & commissioning of Recessed mounted Round type 15 watt LED luminaries of 3000K suitable for indoor applications of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.. (Make : Havells/ Bajaj /Phillips/Wipro or Equivalent)
18
35280
1960
... More
Supply, Installation,Testing & commissioning of 35 watt LED IP 65 luminaries of New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.. (Make : Havells Ruby/ Bajaj /Phillips/Wipro/Homedec or Equivalent)
2
21935
10967.8
... More
Supply and installation of LED street Light of 48 W Capacity 6000K Colour temperature with pressure die-cast Aluminium body having in built electronic driver which have 50000 burning hour road way luminaries (Make : Havells ENDURA CITYLINER NEO or Equivalent )
2
16649
8324.5
... More
Providing and fixing of 125A 4P MCCB with handle switch unit inside existing cubical panel board with ISI marked HRC fuses including drilling holes in cubical pannel, makinfg connection etc as required.
1
12754
12754
... More
Providing and fixing of 63A 4p MCCB with handle switch unit inside existing cubical panel board with ISI marked HRC fuses including drilling holes in cubical pannel, makinfg connection etc as required.
4
26445
6611.3
... More
Providing and fixing of 100A 4P MCCB with handle switch unit inside existing cubical panel board with ISI marked HRC fuses including drilling holes in cubical pannel, makinfg connection etc as required.
4
28648
7162.2
... More
Providing and fixing of 63A TPN change over including drilling holes in cubical pannel, makinfg connection etc as required ( Make L&T / Anchor / Havels /Standard/ Legrand)
1
8422
8422.75
... More
Supply and fixing of 4 pole MCCB 250 A breaking capacity in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required.
1
26200
26200.7
... More
Supply and fixing of 63 amp TNP miniature circuit breaker suitable for inductive loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.( Make L&T / Anchor / Havels /Standard/ Legrand)
2
4845
2422.7
... More
Supply and fixing of 40 amp DP miniature circuit breaker suitable for inductive loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.( Make L&T / Anchor / Havels /Standard/ Legrand)
2
2123
1061.9
... More
Supplying, fitting & fixing of main pannel board 2mm thick C.R. sheet individual box GI angle frame febricated welded hinges, powder coated body & danger board 500A TPN copper bus bar-1 Set,300A TPN copper bus bar-1 Set, indicator lamp, struggle switch & fuses -3 Nos. Digital voltage current meter -1 No., 100/5A CT coil-3 Nos. & wire for wiring Transportation, labour charges for wiring.
1
39145
39145
... More
Supplying, storing, laying, testing and commissioning of 2c x 6 Sq. mm A2XFY Al armoured Cable 1100 Volts etc. as required as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Anchor / Havels / V Guard/RR/KEI )
140
32725
233.75
... More
Supplying, storing, laying, testing and commissioning of 3.5c x 50 Sq. mm A2XFY Al armoured Cable 1100 Volts etc. as required as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Anchor / Havels / V Guard/RR/KEI )
40
20860
521.5
... More
Supplying, storing, laying, testing and commissioning of 3.5c x 35 Sq. mm A2XFY Al armoured Cable 1100 Volts etc. as required as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Anchor / Havels / V Guard/RR/KEI )
60
23967
399.45
... More
Supply, delivery, installation, testing & commissioning of 150 wt LED flood lights luminaries having exclusive innovative designed, pressure die - cast aluminium housing, IP 65 proection , CCT of 6000 K, and lumen output of 7200 lm including cost of all materials labour, T&P etc. complete as directed by the Engineer-in-charge.(Havells/ Bajaj /Phillips or Equivalent)
4
76212
19053
... More
Supply, installation,testing & commissioning of of 9.0 mtr long , continuously tapered, single piece,3.1 mm thick, Galvanized Octagonal pole. The face to face dimension is 155 mm at bottom and 80 mm at top and size of base plate is 300 mm x 300 mm x 16 mm thick. The pole should be manufactured from special steel plate.(Make- Bajaj/ Valmont /JK/Utkarsh)
1
32000
32000
... More
Supply, installation,testing & commissioning of four arms G.I Structure welded with top canopy at an angle of 105 degree suitable for the existing pole. M.S nut bolts are to provided on canopy to fix the arm rigidly on galvanized Octagonal pole.(Make- Bajaj/ Valmont /JK/Utkarsh)
1
12000
12000
... More
Supplying, connection & testing of 3 c x 4 Sq. mm multicore round copper conductor etc as required as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Anchor / Havells / V Guard/RR/KEI )
124
29995
241.9
... More
Supplying, connection & testing of 4 c x 10 Sq. mm Armourd aluminium cable as required as per the direction of Engineer-in-Charge. ( Make of Cable - Finolex/ L&T / Anchor / Havells / V Guard/RR/KEI )
490
146657
299.3
... More
Supply, installation, testing & commissioning of 3.00 mtr long decorative Cast Iron post top lamp post heavy in weight (approximately 60 Kgs) with specially designed the finish of pole should be Antique, the dia of bottom base plate of the pole should be more than 300mm, two nos logo Tourism Department, Govt. of Odisha & O.T.D.C. ltd Should be cast on the pole itself with specially designed 35 W LED luminaries, High visual comfort & High quality white light should be fitting on the top of the pole. Including all cost, conveyance and cost of all labour, T&P required for the work complete in all respect. (Phillips/Havells/CG/Jk/Homdec/ Utkars /Valmont/PPE or equivalent make ).
10
377450
37745
... More
Supply and installation of 600 mm long 20mm dia M.S/G.I Foundation bolt.Including all cost, conveyance and cost of all labour, T&P required for the work complete in all respect.
40
16000
400
... More
Supply, installation,testing & commissioning of coil earthing etc as required as per the direction of Engineer-in-Charge.
10
6000
600
... More
Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.
-
-
-
... More
4 x 16 sq.mm
6
1095
182.6
... More
3 x 10 sq.mm
30
4764
158.8
... More
Supply installation, testing and commisssioning of out door type IP 65 Distribution box 315x600x170 .The Distribution boards shall have provision for entry of cables from the bottom as requiredas of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Hensel or equivalent)
1
10938
10938
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements