Odisha State Cooperative Handicrafts Corporation Tender

CC in (1:3:6) using 4 cm size CBHG metal including cost, conveyance & royalty etc.complete.

C.C (1:2:4)with 12mm size HG chips including all cost, conveyance,royalty & taxes etc.comp.to work site as per the specification approved by the department & direction of E.I.C

Cement punning including cost & conveyance of cement per sqm.

Fly ash brick masonry in CM (1:6) including cost & conveyance etc. complete.

Foundation & Plinth

Up to 3mtr. Height

Above 3mtr.

R.C.C. work of M 20 (equivalent to nominal mix of proportion (1:1.5:3) having a minimum compressive strength (in work test) of 200 Kg/cm2 in 15 cm. Cubes at 28 days after mixing and test conducted in accordance with IS 456 & 516 using 6mm to 20mm (1/4” to 3/4") size (20mm not to exceed 25 percent) hard black broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete, watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or colour washing providing grooves or beads where necessary cost and conveyance royalties and taxes of all materials and labour required for the work etc. complete with all T & P in all respect but excluding cost of M.S. rods or Tor steel and binding wires of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc. of the M.S. Rod and binding wires and tying the grills and placing in proper position in all floors as directed by the Engineer-in-charge.

Column base

Plinth band

Column & beam

Lintel band

Wall band

12mm (1/2”) thick cement plaster over brick walls after raking out joints in cement mortar (1:6) finished smooth including scaffolding, watering and curing, cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete in respect in all floors.

Up to 3mtr. Height

Above 3mtr. Height

16mm (3/4”) thick cement plaster (1:6) finished smooth to brick walls with mixture of water proofing compound after raking out joints including watering and curing, cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete in respect.

Up to 3mtr. Height

Above 3mtr. Height

Finishing wall surface with water proofing cement paint of approved make and shade on new work two coats to give an even shade including cost of approved brand of cement paint curing, scaffolding, cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete in respect in all floors

Supplying,fitting & fixing big six or trafford A C Sheet including fixing of ridges, wind ties, roof drilling hole in wind ties etc including cost of A.C sheet etc. Data for 9.3sqm.

Cost of sheet

Ridges

Straightening bent up or coiled “Tor Rods”, cutting, bending cranking hooking, welding or jointing (if required) the “Tor steel rods” and binding wire and binding, tying the grills, hoisting and placing in proper position as required for R.C.C. works incl

Supplying & paitning coal tar based Epoxy Shalipoxy CTE 103 in two coats over one coat of shaliprime CTE on the surface of floor & wall of godown by the Company authorised applicator.

Neutralization of outside & inside surfaces with 10% HCL solution, soaking & cheking for residuals, water wash & soaking again of the brick works complete in all respect. (As per market Rate)