Odisha Power Transmission Corporation Limited Tender

Earthwork in excavation in ordinary soil withing 50m initial lead and 1.5m initial lift including rought dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth on foundation trenches including dressing and leveling the bed up to the required depth and depositing the excavated materials with all leads and lifts T&P shoring and shuttering , dewatering if required etc complete including cost,conveyance,taxes of all labour with T&P required etc complete as per the direction of the Engineer in charge.

Filling in Foundation and Plinth with sand well watered and rammed, laid in layers not exceeding 150mm in thickness suitable to drawing and design compacted to required depth etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineering charge.

Cement Concrete work of proportion (1:3:6) in bed of foundation / basement of floor etc. using 40mm size hard black crusher broken granite stone metal of approved quality and from approved quarry lead in layers not exceeding 150mm thick compacted to required defth suitable to drawing and design for the site with watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in Foundation and Plinth, footings, bases of columns,etc using 12mm (½ inch) size hard black crusher broker granite stone chips pf approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in Column and Beam using 12mm (½ inch) size hard black crusher broker granite stone chips pf approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Providing and Making Re-enforcing Grills for RCC works with MS rod,tor-steel of required diameter and binding wires of 18 to 20 gauge with straightening, cutting, bending, binding, tying the grills and placing in position suiting to the form-work for RCC structural member as per the drawing and design at site including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineering charge.(Payment shall be made on weight of MS rod/tor-steel only and no separate payment for binding wires)

Brick masonry work with cement mortar (1:6) in Foundation and Plinth using Fly-Ash bricks of size 25cm X 12cmX 8cm having crushing strength not less than 75 kg/Sqcm with dimensional tolerance + 2%and immersing the bricks for six hours before use in masonry work with splays, cutting, corbelling, chamfering, circular moulding and similar such type of works , watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Brick masonry works with cement mortar (1:6) in Super Structure using Fly-Ash bricks of size 25cm X 12cmX 8cm having crushing strength not less than 75 kg/Sqcm with dimensional tolerance + 2% and immersing the bricks for six hours before use in masonry work with splays, cutting, corbelling, chamfering, circular moulding and similar such type of works , watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Providing Cement Concrete of grade M-20 (1:1 ½ :3) using 12mm(½") size hard black crusher broker granite stone chips of approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of shuttering including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

12 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth over inside rough surfaces of brick masonry walls etc with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge.

16mm thick Sand and Cement plaster of proportion (1:6) finished smooth over rough surfaces of brick masonry walls including racking out the joints with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Providing, supplying, fitting and fixing of M.S. Angle of various sizes and placing in position as per design and drawing to be supplied from the Engineer in charge including drilling holes in frames etc supplying required size of M.S screws and cutting grooves or beads where necesary includin gcost, conveyance, and taxes of all materials and cost, conveyance of all albour with T&P required for the work etc complete in all respects as per direction of the Engineer in charge.

Providing and fixing Concertina Coil Fencing with punched tape concertina coil 600 mm dia 10Mtr openable length (total length 90M), having 50 nos rounds per 6M length, upto 3 M length of wall with existing angle iron Y shaped placed 2.4M or 3.00 M apart and with 9 horizontal R.B.T rainforced barbed wire, stud tied with G.I staples and G.L chips to retain horizontal, including necessary colts or G.I barbed wire tied to angle iron, all complete as per the direction of the Engineer -in-charge, with reinforced barbed tape (R.B.T)/ spring core (2.5 mm thick) wire of high tensile strength of 165 Kg/ Sqm mm with tape (0.52mm thick) and weight 43.478 gm/meter (cost of M.S angle CC blocks shall be paid separately)

Labour for rubbing out heavy moss from shift walls exposed to weather including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respects as per the direction of the Engineer-in- charge.

Providing Primming one coat with primer over plastered surface of approved quality and make painted and finished after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.

Wall painting two coats with weather shield coat of approved shade over wall surface finished smooth to give an even shade including watering,curing etc complete including cost,conveyance,taxes of all materials and cost,conveyance,taxes of all labour with T&P required etc complete in all respects as per the direction of Eng.-in-charge.

Providing Primming one coat with primer for iron works of approved quality and make painted and finished after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.

Providing Painting two coats with Alluminium Paint for wood & iron works of approved quality, make and shade, painted and finished smooth after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.

Supplying all labour with T&P for filling foundation and plinth with excavated material including watering, ramming etc comolete including cost , conveyance , royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete (measurement will be taken on finished & complete section only) as per the direction of the Engineer in charge.

Providing and Supplying for Removal and Disposal of surplus earth, debries, garbages etc with mechanical means like transportation by Truck /Tractor with loading and unloading of the materials to a distance up to 5 Kms etc complete including cost of Transportation charges and labour with T&P for collecting, loading, unloading, removal & disposal in all respects as per the direction of the Engineer-In-Charge