Odisha Power Transmission Corporation Limited Tender

16mm thick Sand and Cement plaster of proportion (1:6) finished smooth over rough surfaces of brick masonry walls including racking out the joints with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Providing Cement Concrete of (1:1 ½ :3) for fixing U angle using 12mm(½") size hard black crusher broker granite stone chips of approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of shuttering including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Cement Concrete work of proportion (1:2:4) over top of the Boundary Wallusing 12mm size hard black crusher broken granite stone chips of approved quality and from approved quarry lead in layers not exceeding 150mm thick compacted to required defth suitable to drawing and design for the site with watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineering charge.

Providing Painting two coats with Synthetic Enamel Paint over one coat of primer to iron works of approved quality, make and shade, painted and finished smooth after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.

Providing Primming one coat with primer over plastered surface of approved quality and make painted and finished after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.

Providing for Weather coat two coats of approved quality, make and shade washed and finished smooth over exterior surfaces of wall etc after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.

Providing, Fitting Concertina Coil fencing with punched tape concertina coil 600mm dia 10 mtr openable length (total 90mtr.) having 50 nos rounds per 6m. Length, upto 3m height of wall with existing angle iron U shaped placed 2.4m or 3.0m apart and with 9 horizontal RBT reindored barbed wire, stud tied with GI staples and GI clips to retain horizontal, including necesssary bolts or GI barbed wire tied to angle iron, all complete as the direction of EIC, with reinforced barbed tape (RBT)/ Spring core (2.5mm thick) wire of high tensile strength of 165Kg/Sqm with tape (0.52mm thick) and weught 43.478gm/mtr including supplying of all labour and T&P required for the work with cost conveyance, taxes of all materials etc. complete as per the direction of the Engineer-in-charges.

Providing, Supplying, fitting & fixing of "U" Angl over the top of the Boundary wall made with M.S Angle of size 50mm x 50mm x 5mm for a total length of 1.8 meter per each , to make the angle in U shape by cutting & welding the angle & drilling holes 5 nos in each U angle including supplying of all labour and T&P required for the work with cost conveyance, taxes of all materials etc. complete as per the direction of the Engineer-in-charges.

CESS 1%