Odisha Power Transmission Corporation Limited Tender

Providing, supplying, fitting and fixing of M.S. grill gate, made out of M.S. flat and M.S. angle , M.S. square bar conforming to IS 1977/ 1975 of approved design and drawing (design and drawing to be supplied from the Engineer in charge) including drilling holes in frames etc supplying required size of M.S. screws and cutting grooves or beads where necessary including cost, conveyance, and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per direction of the Engineer in charge.

RCC M20 grade in Foundation and Plinth, footings, bases of columns, mass concrete, precast slabs etc having a minimum compressive strength 20 N/mm2 ( in work test of 200 Kg per CM2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S.516 using 12 mm to 20 mm size hard black crusher broken granite stone chips (20 mm size not to exceed 25% ) including hoisting, lowering, laying compacting concrete by using concrete mixer vibrators and similar equipments and tools and plants with watering and curing for 28 days including centering, shuttering and finishing the exposed surfaces smooth providing grooves or beads where necessary including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects but excluding the cost of M.S. rods or tor steel and binding wires and labour charges for cutting, bending, binding and tying the grills etc complete as per the direction of the Engineer - in - charge.

Supplying,fitting,fixing, and placing uncoated HYSD Bar reinforecement including straightening ,cutting, bending, binding by using binding wire of18-20 gauze , molding, welding, jointing if necessary and placing in position as per drawing & technical specification ( Payment shall be made on weight of M.S. Rod & Tor steel only and no separate payment will be made towards the weight of binding wires) including cost,conveyance, royalties and taxes of all materials and cost, conveyance,taxes of all labour T & P required etc complete as per direction of Engineer in charge.

Priming one coat with of approved quality of primer of Berger make including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge (over iron surface)

Painting two coats with synthetic enamel paints to iron / wooden doors and windos with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge

Supplying all labour for dismantling cement concrete including stacking of useful material for reuse and removal of debris within 50m initial lead including cost,conveyance,royalties & taxes of all labour with T & P required etc complete as per direction of Engineer in charge

Cement concrete with (1:1.5:3) in using 12 mm size black hard crusher broken granite stone chips of approved quality from approved quarry including lower laying concrete watering and curing etc complete including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. (for minor repair works only)