Odisha Power Transmission Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Odisha Power Transmission Corporation Limited - OPTCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date1 Oct 2022
Closing Date7 Nov 2022
Tender Amount₹ 28,05,44,897
Costs
EMD
Refer DocumentsDocument Cost
₹ 25,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_OPTCL_81942_1Bid Award Id
ViewTender No
OPTCL-CVL-SE-E-06 of 22-23Tender Authority
Odisha Power Transmission Corporation Limited ViewPurchaser Address
-Website
http://https://www.optcl.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
e-RA vendor registration process manual.
BOQ Items
Boundarywall
221.4
-
215.2
Electric Panel aroom
58.32
-
215.2
Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough
dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.+1.5m extra lift.
1
-
-
Main Building
581
-
230.73
Loosening, Leveling & Compacting original ground supporting embankment to faciliate placement of first layer of embankment, scarified to a depth 150mm, mixed with water at OMC and then compacted by rolling so as to achive minimum dry dencity as given in Table 300-2 for embankment construction. (A/R 2006, Pg-158, item no 37)
1
-
-
Road
2631.9
-
20.8
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MOSRT&H Specifications for Road & Bridge works .(A/R 2006, Pg-160, item no 39)
1
-
-
Road
657.98
-
1201.2
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
1
-
-
Lanscaping
621.5
-
30.11
Supplying & Filling foundation trenches , plinth & ditches with clean course river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and all taxes of sand,cost & conveyance of water, cost of all Labour,labour cess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
1
-
-
Building Proper
2665.12
-
335.3
Site Filling
4847.22
-
335.3
Security Shade
12.34
-
335.3
Drain
38.1
-
335.3
Road
438.65
-
335.3
Boundarywall
134.4
-
335.3
Electric Panel aroom
64.98
-
335.3
Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m.
1
-
-
Building Proper
547.8
-
119.5
Site Filling
2077.38
-
119.5
Security Shade
3.68
-
119.5
Boundarywall
48.1
-
119.5
Lanscaping
310.75
-
98.7
Electric Panel aroom
11.03
-
119.5
Disposal of surplus excavted materials by mechanical means from the work side etc. complete. upto 5km. Lead
1
-
-
Building Proper
1278.2
-
151.17
Security Shade
15.76
-
151.17
Electric Panel room
47.29
-
151.17
Providing and laying Plain cement concrete of proportion(1:3:6) in foundation and floors(i.e. below the base course of the flooring) using cement, 40mm. Size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry inclduign hoisting, lowering and laying concrete to the required level, ramming,watering and curing etc. completek to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance, loading, unloading,royalities and taxes of all materials, cost of all labour,T&P required for the work including shoring,shuttering anddewatering(if required)including hire and running charges of water pump required for the work etc. complete in all respect as directed by the Engineer-in-charge.
1
-
-
Building Proper
248.04
-
4472.8
Security Shade
2.21
-
4472.8
Drain
38.14
-
4472.8
Boundarywall
14.8
-
4472.8
Electric Panel aroom
22.57
-
4472.8
Providing and laying in position ready mixed M-30 grade concrete having compressive strength at 28 days test not less than 300 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , including the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.
1
-
-
Foundation & Plinth
1
-
-
Raft foundation
541.48
-
5119.8
RCC in Grade beam
51.47
-
5478.4
RCC in column from raft slab top to EGL
95.96
-
10953.5
RCC in Plinth Beam
105.6
-
5478.4
RCC in Lift wall
25.61
-
7141.9
Ground floor
1
-
-
RCC in column
91.82
-
10953.5
RCC in roof beam
78.59
-
10953.5
RCC in roof slab
132.99
-
9317.7
RCC in S.case
18.27
-
10463.7
RCC in Lintel
9.76
-
8686.6
RCC in Sill
5.77
-
8686.6
RCC in Chajja
4.29
-
801.5
RCC Wall
11.8
-
7141.9
Platform Slab
10.3
-
1056.5
First Floor
1
-
-
RCC in column
91.82
-
12237.6
RCC in roof beam
92.78
-
12237.6
RCC in roof slab
176.2
-
10274.6
RCC in S.case
18.27
-
11649.8
RCC in Lintel
9.23
-
9517.4
RCC in Sill
5.47
-
9517.4
RCC in Chajja
2.61
-
902.8
RCC Wall
11.8
-
7663.7
Platform Slab
3.86
-
1233.8
Second Floor
1
-
-
RCC in column
91.82
-
13774.2
RCC in roof beam
87.14
-
13774.2
RCC in roof slab
150.86
-
11418.6
RCC in S.case
18.27
-
13068.9
RCC in Lintel
12.6
-
10509.9
RCC in Sill
7.57
-
10509.9
RCC in Chajja
2.61
-
1024.2
RCC Wall
12.69
-
8285.5
Platform Slab
8.96
-
1446.4
Third Floor
1
-
-
RCC in column
86.91
-
15613.1
RCC in roof beam
83.45
-
15613.1
RCC in roof slab
154.53
-
12786.4
RCC in S.case
18.27
-
14766.76
RCC in Lintel
9.59
-
11696
RCC in Sill
5.1
-
11696
RCC in Chajja
2.61
-
1169.5
RCC Wall
12.69
-
9026.7
Platform Slab
3.86
-
1701.4
Fourth Floor
1
-
-
RCC in column
76.95
-
17814.1
RCC in roof beam
76.43
-
17814.1
RCC in roof slab
103.65
-
14422.1
RCC in S.case
18.27
-
16798.47
RCC in Lintel
10.61
-
13113.5
RCC in Sill
6.37
-
13113.5
RCC in Chajja
2.61
-
1343.5
RCC Wall
12.69
-
9910.4
Platform Slab
3.86
-
2007.1
Fifth Floor
1
-
-
RCC in column
76.95
-
20448.7
RCC in roof beam
82.71
-
20448.7
RCC in roof slab
167.12
-
16378.3
RCC in S.case
5.95
-
19230.3
RCC in Lintel
8.93
-
14808.5
RCC in Sill
5.45
-
14808.5
RCC in Chajja
2.61
-
1551.8
RCC Wall
12.69
-
10964.3
Platform Slab
2.51
-
2373.7
Terrace Floor
1
-
-
RCC in column
22.39
-
23602.9
RCC in roof beam
7.91
-
23602.9
RCC in roof slab
46.74
-
18718.5
RCC in S.case
0.53
-
22140.5
RCC in Lintel
1.81
-
16833.5
RCC in Sill
1.04
-
16833.5
RCC in Chajja
1.26
-
1801.4
RCC Wall
33.24
-
12221.5
Security Shade
1
-
-
Foundation
3.6
-
5119.8
RCC in plinth beam
0.96
-
5478.4
Ground floor
1
-
-
Rcc in column
1.53
-
10953.5
RCC in Roof beam
0.56
-
10953.5
RCC in roof slab
1.45
-
9317.7
Lintel
0.36
-
8686.6
Sill
0.22
-
8686.6
Chajja
1.22
-
801.5
Drain
1
-
-
Base slab
31.8
-
5119.8
RCC wall
63.6
-
7141.9
Cover slab
31.8
-
9317.7
Boundarywall
1
-
-
Footing
44.3
-
5119.8
R.C.C in Plinth beam
16.7
-
5478.4
RCC in col.
27.2
-
10953.5
R.C.C tie Band
10
-
10953.5
Electric Panel aroom
1
-
-
Foundation
1
-
-
Footing
10.8
-
5119.8
RCC in plinth beam
3.43
-
5478.4
Ground floor
1
-
-
RCC in coloum
6.21
-
10953.5
RCC in Roof beam
3.14
-
10953.5
RCC in roof slab
17.58
-
9317.7
Lintel
1.37
-
8686.6
Sill
0.83
-
8686.6
Chajja
17.69
-
801.5
Double stage centring & shuttering for Roof slab, balconies & projection above 3.60 mtr up to 7.20mtr heights.
1
-
-
First floor
22.89
-
14143.2
Fifth floor
35.12
-
16209.8
Cutting,straightening coiled or bent up HYSD/TMT Reinfocement Bars welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved eesigns and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only)
1
-
-
Foundation
905.67
-
8705
Ground floor
564.16
-
8705
First floor
629.78
-
8729.3
Second floor
605.04
-
8754.9
Third floor
580.22
-
8781.8
Fourth floor
498.92
-
8810
Fifth floor
549.86
-
8839.7
Terrace Floor
152.06
-
8870.8
Security Shade
1
-
-
Foundation
4.47
-
8705
Ground floor
3.73
-
8705
Drain
114.4
-
8705
Boundarywall
98.2
-
8705
Electric Panel aroom
1
-
-
Foundation
13.96
-
8705
Ground floor
27.46
-
8705
2.5 cm. Damp proof course with C.C. (1:2:4) using 12mm. Size hard broken granite Chips
1
-
-
Building Proper
65.22
-
284.6
Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of Engineer-in-Charge.
1
-
-
Building Proper
82.53
-
4105.1
Security Shade
0.72
-
4105.1
Electric Panel room
2.74
-
4105.1
Aerated Autoclaved Concrete blocks of size 625mmX200mmX200mm having compressive strength more than 4N/ sqmm confirming to IS:2185-Part-3-1984 & IS:6441-1972 of Lean/Aerolite or equivalent products in cement mortar of mix (1:6) using cement of approved quality, screened & washed sand for use in super structure including splays cutting, circular moulding , corbrlling, champering & similar such type of works, watering & curing etc. including cost, conveyance, royalty, loading, unloading of all materials, cost of labour, scaffolding, sundries, T & P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
1
-
-
Building Proper
1
-
-
Ground floor
179.95
-
4171
First floor
172.78
-
4200.9
Second Floor
243.13
-
4273.4
Third Floor
180.79
-
4356.9
Fourth Floor
202.12
-
4452.9
Fifth Floor
160.62
-
4563.3
Terrace Floor
36.59
-
4690.2
Security Shade
5.34
-
4170
Electric Panel room
30.67
-
4171.1
Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25c.m x 12 c.m x 8 c.m in Super structure having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance, stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
1
-
-
Boundarywall
110.1
-
4138.27
Providing, fitting and fixing 80 mm thick factory made cement concrete interlocking paver block of M-35 grade and approved make variety colour and size made by block making machine with strong vibratory compaction of approved design and shape, laid in required colour and pattern over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc all complete including cost of all materials, labour, carriage etc complete in all respects.
1
-
-
Road
4386.5
-
791
Providing 12mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Outer side)
1
-
-
Building Proper
1
-
-
Ground floor
662.77
-
139
First floor
606.56
-
144.7
Second Floor
719.77
-
150.6
Third Floor
736.38
-
156.8
Fourth Floor
759.5
-
163.4
Fifth Floor
681.38
-
170.2
Terrace Floor
190.65
-
177.5
Security Shade
39.1
-
139
Boundarywall
1197.4
-
139
Electric Panel room
268.1
-
139
Providing 12mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Inside)
1
-
-
Building Proper
1
-
-
Ground floor
2289.02
-
139
First floor
1758.24
-
142.4
Second Floor
2492.08
-
145.9
Third Floor
2293.51
-
149.5
Fourth Floor
2401.57
-
153.2
Fifth Floor
2174.38
-
157
Terrace Floor
179.8
-
160.9
Security Shade
32.8
-
139
Electric Panel room
156.5
-
139
Providing 6 mm thick cement plaster in cement mortar of mix (1:4) at all height using screened & washed sharp river sand for mortar with approved quality of cement to the ceiling of the Roof Slab, Staircase, Beams, Columns,Landings, Railings,Chajja ,Fins ,Walls ,Jally and Shelves etc. including roughening, scraping, chiseling, cleaning, closed deep chipping with slurry treatment and finished smooth to all R.C.C. Surface including cost, conveyance, loading, unloading, royalties ,stacking and all taxes , cost of all Labour,Labour cess ,Sundries, T&P, Scaffolding, Watering, Curing etc. complete in all respect as directed by the Engineer- in- charge.
1
-
-
Building Proper
1
-
-
Ground Floor
1130.29
-
149
First floor
1111.26
-
152.7
Second Floor
1164
-
156.6
Third Floor
1062.07
-
160.5
Fourth Floor
886.93
-
164.6
Fifth Floor
1025.66
-
168.8
Terrace Floor
688.53
-
173.1
Security Shade
11.43
-
149
Electric Panel room
166.18
-
149
Priming one coat with water bound wall cement primer. (Outside)
1
-
-
Building Proper
1
-
-
Ground floor
662.77
-
61.8
First floor
606.56
-
64.3
Second Floor
719.77
-
66.9
Third Floor
736.38
-
69.7
Fourth Floor
759.5
-
72.6
Fifth Floor
681.38
-
75.6
Terrace Floor
190.65
-
78.8
Security Shade
83.41
-
61.8
Boundarywall
1197.4
-
61.8
Electric Panel room
590.86
-
61.8
Priming one coat with water bound wall cement primer. (Inside)
1
-
-
Building Proper
1
-
-
Ground floor
3419.31
-
61.8
First floor
2869.5
-
63.3
Second Floor
3656.07
-
64.8
Third Floor
3355.57
-
66.4
Fourth Floor
3288.5
-
68
Fifth Floor
3200.04
-
69.7
Terrace Floor
868.33
-
71.5
Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance ,taxes of all materials , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.
1
-
-
Building Proper
1
-
-
Ground floor
3419.31
-
68.8
First floor
2869.5
-
69.5
Second Floor
3656.07
-
70.1
Third Floor
3355.57
-
70.8
Fourth Floor
3288.5
-
71.5
Fifth Floor
3200.04
-
72.3
Terrace Floor
868.33
-
73
Wall painting two coats with Acrylic paint(plastic emulsion) of approved quality of premium brand of approved quality & colour at all heights to the interior surface of the wall to make an even finished surface including sand papering, applying putty wherever necessary including cost, conveyance, loading, unloading, stacking, all taxes , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.
1
-
-
Building Proper
1
-
-
Ground floor
3419.31
-
81.3
First floor
2869.5
-
82.9
Second Floor
3656.07
-
84.6
Third Floor
3355.57
-
86.2
Fourth Floor
3288.5
-
87.9
Fifth Floor
3200.04
-
89.8
Terrace Floor
868.33
-
91.6
Security Shade
44.27
-
81.3
Electric Panel room
322.72
-
81.3
Finishing walls with textured exterior paint of required shade :
1
-
-
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. (DSR 2021 CODE NO 13.45.1)
1
-
-
Building Proper
4357.01
-
179.96
Security Shade
39.14
-
179.96
Boundarywall
1197.4
-
179.96
Electric Panel room
268.14
-
179.96
Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : (DSR 2021 CODE NO 13.73.1)
1
-
-
Building Proper
5856
-
35.31
Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Outer side for double plaster)
1
-
-
Building Proper
1
-
-
Ground floor
662.77
-
199.3
First floor
606.56
-
204.4
Second Floor
719.77
-
209.6
Third Floor
711.42
-
214.9
Fourth Floor
759.5
-
220.4
Fifth Floor
679.09
-
226.1
Terrace Floor
353.03
-
232
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments
etc. complete. (DSR 2021 CODE NO 11.46.2)
1
-
-
Building Proper
1181.59
-
1265.35
Security Shade
9
-
1265.35
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. (DSR 2021 CODE NO 11.41A.3.2)
1
-
-
Building Proper
172.46
-
1193.96
Security Shade
1.8
-
1193.96
Providing Granite stone matt finished 20mm thick of area above 0.40 Sqm in flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the granite tile if required watering and curing for 21 days, including edge moulding at required places including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, Labour cess ,sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.
1
-
-
Building Proper
1
-
-
Ground Floor
514.41
-
2193
First Floor
169.46
-
2203
Second Floor
334.86
-
2213.6
Third Floor
285.96
-
2224.7
Fourth Floor
369.83
-
2236.3
Fifth Floor
408.84
-
2248.6
Terrace Floor
37.94
-
2261.4
Providing Granite stone prepolished 10mm thick of area above 0.40 Sqm in dado/skirting,riser of steps of approved quality, colour and size in dado/ skirting,riser of steps,wall on 12mm thick bed of cement mortar of mix (1:3) laid in proper plumb and line with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, Labour cess ,sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.
1
-
-
Building Proper
1
-
-
Ground Floor
171.86
-
2297.5
First Floor
94.9
-
2312.6
Second Floor
161.34
-
2328.5
Third Floor
95.07
-
2345.2
Fourth Floor
139.3
-
2362.8
Fifth Floor
103.63
-
2381.2
Terrace Floor
28.31
-
2400.5
2.5cm artificial stone flooring with cement concrete (1:2:4) including punning using 12 mm size hand broken granites chips. (A/R 2006, Pg-84, item no-02)
1
-
-
Building Proper
1
-
-
Ground Floor
130.63
-
305.7
First Floor
35.89
-
316.1
Second Floor
35.89
-
327.1
Third Floor
35.89
-
338.5
Fourth Floor
35.89
-
350.6
Fifth Floor
35.89
-
363.2
Electric Panel room
130.79
-
237.2
Providing and installation of Vinyl Sheet Flooring of approved make with a nominal thickness of 2mm as per ISO 24340 - EN 429 and width of 2m as per ISO 24341 - EN 426. Primo SD shall conform to requirement of ISO 10581 - EN 649. Primo SD shall have binder content of Type I as per ISO 10581, Fire resistance of 8kW/m2 as per ISO 9239-1 and Class Bfl-S1 as per EN 13501-1, Indentation of less than .03mm as per ISO 24343-1 and EN 433, Slip Resistance of R9 as per DIN 51130, greater than 0.3 as per EN 13893. The static electrical discharge shall be less than 2kV as per EN 1815. The electrical resistance of the product shall be less than 10^8 Ω as per EN 1081. The product does not contain Pthalate based plasticizer and emission rate of VOC is very low, measured after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10µg/m3. It is 100% REACH compliant. The product is fit to be used in Class 34 in Commercial and Class 43 in Industrial as per EN ISO 10874. The product is installed using multi coloured welding rods to ensure seamless finish. The average seam strength shall be more than 240N/50mm as per EN 684. (Make: Tarkett/ Wonderfloor/ Responsive)
1
-
-
Building Proper
310.09
-
2615
Electric Panel room
130.79
-
2615
Providing and installation of self-levelling course before laying the seamless flooring using the self levelling compound : The flooring should be laid on a smooth, clean sub floor which shall be prepared by self-levelling compound (Make: KERATECH ECO or equivalent) with primer (Make: A Eco or equivalent) which will perform correction of irregularities, un-even substrate, develops high levels of resistance to the solvent action of water, recyclable as an inert material, very low volatile organic compound emission etc. all complete as per direction of EIC
1
-
-
Building Proper
310.09
-
579
Providing and installation of Homogenous Vinyl Sheet for wall with a total thickness of 1.3 mm as per ISO 24346 - EN 428, width of 2m as per ISO 24341 - EN 426, weight of 2.100 g/m2 as per EN ISO 23997.. The wear surface shall be PUR reinforced. It shall conform to requirement of wetroom as per GBR class VT. It shall have Class A as per ASTM F24 F51 and ISO Class 4 as per ISO 14644-1 for the Clean room test. he product does not contain Pthalate based plasticizer and emission rate of VOC is very low, measured after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10µg/m3. It is 100% REACH compliant. The product is fit to be used in Class 34 in Commercial and Class 43 in Industrial as per EN ISO 10874.
The product is installed using multi coloured welding rods to ensure seamless finish. The average seam strength shall be more than 240N/50mm as per EN 684
1
-
-
Building Proper
100.38
-
1350
Electric Panel room
115.92
-
1350
Providing 16mm. thick finished kota stone flooring using kota stone of approved quality, colour and size above 0.10 sqm in floors, treads on steps and landing on 20mm. thick bed of cement mortar mix of (1:4) with screened and washed sharp river sand for mortar and cement of approved quality, grouted with neat white cement slurry laid in proper slope joining the Kota stone with neat white cement slurry mixed with required quantity of pigment of approved marks to match the shades of the kota stone to kota colour if required, watering and curing for the required period , including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T&P required for the work including cost of rubbing mechanically and wax polishing etc complete in all floors at all height in all respect as directed by the Engineer-in-charge.
1
-
-
Building Proper
1
-
-
Fifth Floor
12.75
-
787.1
Providing 16mm. thick finished kota stone in dado/skirting using kota stone slab above 0.10 sqm of approved quality, colour and size in dado, risers of steps on 12mm. thick bed of cement mortar mix of (1:3) with screened and washed sharp river sand for mortar and cement of approved quality, grouted with neat white cement slurry laid in proper slope mixed with required quantity of pigment of approved marks to match the shades of the kota tiles to kota colour if required, watering and curing for thr required period, including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. in all floors at all height complete in all respect as directed by the Engineer-in-charge.
1
-
-
Building Proper
1
-
-
Fifth Floor
2.18
-
1264
To supply and install GERFLOR TARAFLEX RECREATION made in Europe or equivalent, an overall thickness of 6.0 mm synthetic sport surface comprising of: - PUR Protect® treated + vinyl surface layer, calendared and grained, associated with PVC density single closed cell foam, reinforced by a fiberglass grid structure reinforcement, Sanosol treatment for fungi static and bacteriostatic properties, Weight: 3.7kg/m2, Impact resistance (EN 1517) ≥8 N/m, Abrasion resistance (EN ISO 5470-1) ≤350mg, Shock absorption (EN14808) ≥25%, Indentation resistance (EN 1516) ≤0.5mm, Ball bounce (EN 12235) ≥ 90%, Vertical deformation (EN 14809) ≤3.5mm, Sliding coefficient (EN 13036-4) 80 – 110, Fire (EN 13501-1) Cfl-s1, Energy return (NF P 90 203) ≥ 0.31m/s, Ball speed (UEFA) 50 to 65 cm, TVOC after 28 days 100 microgram /m3 according to ISO 16000-6, Floor Score® Impact sound insulation of 18dB according to ISO 717-2, specification for indoor surfaces for multi-sports use (EN14904), REACH compliant, Singapore Green Label (The synthetic flooring must comply with international standards and homologated by FIBA, ITTF, BISFED, BWF, EHF, IHF, AFC, IFF and AVC and complete with 10 years manufacturer’s product warranty)
1
-
-
Building Proper
131.11
-
4500
Providing and fixing 8.3 mm minimum thickness laminated flooring, with minimum plank size of 1215mmx195mm, joined with a tongue and groove locking system, under laid with minimum 2 mm thick polyethylene foam and water barrier of minimum 200 microns, including all material, labour, cushioning, skirting minimum 60 mm high, end profile, corner angle etc complete as per requirement, specifications, manufacturer's manual and instruction of Engineer- In - Charge. Make Xylos (Chrome).
1
-
-
Building Proper
386.11
-
1300
Providing , fitting & fixing of Tactile flooring confirming to IS 4457:2007 of approed size 300mmx300mmx15mm with button profile=10mm+4.5mm, Tac liner profile = 10mm+4.5mm, low water absorption below below 0.5% of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
1
-
-
Building Proper
65.42
-
1847.2
Granite strip flooring including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, Labour cess ,T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.
1
-
-
Building Proper
22.7
-
2187.5
Providing and laying Granite stone slab (Honed Finished) of approved shade,quality and thickness not less than 18mm for floors and skirtings over cement mortar bed 20 mm thick in prop 1:4 (1 cement : 4 coarse sand) including cutting where necessary finished with flush pointing white cement slurry mixed with approved pigment to match the shade of granite slab,complete at all levels including the cost of all materials cost of all labour,conveyance ,taxes,roylties, loading,unloading ,sundries,watering and curing,T & P , etc . complete as per the direction of the engineer-in-charge.
1
-
-
Building Proper
110.34
-
4843.8
Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of:
(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. (b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge. (c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. (DSR 2021 , Code no: 11.54.2)
1
-
-
Building Proper
956.68
-
5407.15
Supplying, fitting and fixing of Antiskid Ceramic Floor Tiles in flooring using special plain / printed series Ceramic Floor Tile of premium grade ( having minimum thickness 7 mm to 8 mm & size 400 mm x400 mm, confirming to I.S 13755 of approved quality and shade in floors, treads on steps and landings on 20 m.m thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened & washed sharp river sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments (Tiles are to be immersed in the water for required time before use) of approved make to match the shades of the Ceramic Floor Tiles if required including cost, conveyance, loading, unloading, stacking, royalties , all taxes,rubbing, cost of all Labour, Labour cess ,Sundries, T&P required for the work , Watering , Curing for required days , cleaning the flooring space manually etc. complete in all respect as directed by the Engineer-in-charge. (A/R 2006, Pg-89, item no-16)
1
-
-
Building Proper
1
-
-
Ground Floor
21.94
-
673
First Floor
21.94
-
683
Second Floor
21.94
-
693.6
Third Floor
21.94
-
704.7
Fourth Floor
21.94
-
716.3
Fifth Floor
21.94
-
728.6
Supplying, fitting & fixing of Ceramic wall Tile (30x30 cm / 20x20 cm special plain / printed) series tiles in dadoes, skirting and risers of steps of size 600mmx 600mm of approved make confirming to IS:13755 laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials,rubbing, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge . (A/R 2006, Pg-90, item no-17)
1
-
-
Building Proper
1
-
-
Ground Floor
25.18
-
1066.7
First Floor
25.18
-
1098
Second Floor
25.18
-
1130.9
Third Floor
25.18
-
1165.4
Fourth Floor
25.18
-
1201.6
Fifth Floor
25.18
-
1239.6
Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
1
-
-
Building Proper
1
-
-
Ground Floor
128
-
5049.73
Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.
1
-
-
18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. (DSR-2021 Code no-8.11.1)
1
-
-
Building Proper
1
-
-
Ground Floor
32.04
-
6675.11
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and
embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
1
-
-
Granite Stone of approved shade (DSR-2021, Sl no-8.10.2)
1
-
-
Building Proper
21.6
-
3102.39
Supply and installation of 1.2 mm thick MYK POWER PRUFE 800 below grade pre-applied integrally bonded waterproofing sheet membrane composed of 0.7 mm thick HDPE backing layer and a trafficable weather resistant protective granular layer realizing a firm bonding to poured concrete to prevent water ingress applied on prepared sub base and shoring prior to casting of concrete. The membrane is loosely-laid with the adhesive side facing upwards and removing the selvedge release film at the pre-manufactured overlap areas and is firmly pressed to ensure firm bonding. Seal roll end laps and non selvage joints with a special tape strip powerpruf then firmly Duct Tape a double side adhesive tape to stuck on the overlap removing granules and pressing it thoroughly by roller to release entrapped air if any. The product complies to a tensile strength of 800N, elongation of 400% and peeling strength from concrete 2.5N/mm. The rate is inclusive of all adhesives, sealants, tapes for overlap areas, labour and all jointing material with necessary tools and equipment’s for carrying out the work with cost, conveyance, of all materials, labour and T&P required for the work etc. complete in all respect as per direction of Engineer-in-charge.
1
-
-
Building Proper
1420.04
-
885
Supply and installation of 1.5 mm thick MYK Self Stick 3000 post-applied Self-adhesive Membrane with HDPE liner onto prepared and primed(MYK Tarmat SB 200) retaining wall surface with a side overlap of 75mm and end overlap of 100mm as per specification. All membrane to be terminated at least 300mm above ground level by preparing a groove and terminate the membrane inside the groove and seal the groove with polymer modified mortar
1
-
-
Building Proper
249.7
-
635
Raft Slab & RCC wall Construction Joint Treatment:
Supply and installation of SealArm waterbar RS 800 on stater joint and construction joints horizontally & vertically with adhesive ). It’s a ReSwellable Hydrophilic Water bar & SealArm Waterbar RS 800 is a well-developed joining strip which is very economic and safe to use, compared to usual joint sealing methods. The necessary construction joints can be worked out frictionally and pressure water tight up to 3 bars. The cost includes all materials, labour, conveyance, scaffolding, T&P etc complete in all respect as per direction of EIC. (Swelling Capasity: 800 % by volume expansion in 14 Days.)
1
-
-
Building Proper
320.65
-
421
Supply and installation of Epoxy Resin Based Concrete Bonding Agent ReArm Bond EBA for old to new concrete joint to create a good adhesion atrength between old to new concrete. The Product must posses the following technical properties:
Compressive Strength: 75 N/mm2 in 28 days as per ASTM C109-99
Tensile Strength:50 N/mm2 as per ASTM D 638
Pull off Adhesion: 1.5 N/mm2 ( Concrete Failure) as per ASTM D 4541-09
Flexural Strength: 50 N/mm2 as per ASTM C 580-12
1
-
-
Building Proper
456
-
310
Providing and installation of self-levelling course before laying the seamless flooring using the self levelling compound : The flooring should be laid on a smooth, clean sub floor which shall be prepared by self-levelling compound (Make: KERATECH ECO or equivalent) with primer (Make: A Eco or equivalent) which will perform correction of irregularities, un-even substrate, develops high levels of resistance to the solvent action of water, recyclable as an inert material, very low volatile organic compound emission etc. all complete as per direction of EIC
1
-
-
Electric Panel room
130.79
-
579
2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size HG chips including all cost, conveyance, royalty & taxes etc.comp.to work site for new work as per the specification approved by the department & direction of E.I.C
1
-
-
Building Proper
1
-
-
Third Floor
124.14
-
392.1
Terrace floor
919.47
-
486.1
Head room & machine room roof slab
78.73
-
543.9
Security Shade
11.76
-
292.3
Electric Panel room
130.79
-
292.3
Providing & applaying Sika top seal 109 HI over roof slab and parapets before application of SIKA Top seal 109HI the surface should be prime with SIKA 109HI primer , SIKA Fab 1 shall be laid between the coats of water proofing membrame , the entire application cover with SIKA TOP seal HI CC (curing compound) including cost of all materials,Conveyance, labour, T&P etc. complete in all respect as per specification and direction of Engineer-in-charge.
1
-
-
Building Proper
1122.34
-
550
Providing and applying two coats of high SRI heat reflective coating/albedo paints/cool roof/Ambi cool on roof surface.Application of a single coat of water based primer all over the roof surface followed with application of two-three coats of high SRI coatings of value 108 and above as per the instruction of engineer in charge.Final surface after the application should be dust and water repellent. This cost includes all materials, labour, T&P, transportation, taxes complete in all respect. ( Make: PBS /LERON CHEMICAL/ JM Coatings)
1
-
-
Building Proper
1122.34
-
386
Supplying and Fixing of M.S. Window Grill made out of M.S Flat conforming to IS 2062/2006 painted with Red Oxide Primer as per the design approve by E.I.C including cost,conveyance of all materials, priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge
1
-
-
Building Proper
18310.65
-
65.65
Security Shade
43.2
-
65.65
Boundarywall
6507
-
65.65
Electric Panel room
378
-
65.65
Painting two coat with approved synthetic enamel paint to new wood & iron work including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
1
-
-
Building Proper
1
-
-
Ground Floor
77.99
-
140.8
First Floor
41.25
-
144.4
Second Floor
46.51
-
148.1
Third Floor
49.21
-
151.9
Fourth Floor
44.08
-
155.8
Fifth Floor
56.18
-
159.8
Terrace Floor
30.08
-
163.9
Security Shade
4.97
-
140.8
Boundarywall
108.5
-
140.8
Electric Panel room
28.8
-
140.8
Supply, Installation, testing & commissioning of 120 minutes of metal fire rated doors ( Saint Gobain or equivallent ) with vision panel 400 X 900 mm having 11mm thick contraflame doorlite as per IS 3614 part-2:1992 for stability and integrity. Pressed Galvanized steel confirming to IS 277 specification. Door tested & Approved in CBRI for maximum rating of 2hrs. Produced from 1.6 MM thick galvanized steel sheet formed to double rebate profile of size 105 x 60mm & 143mm X 57mm (+/- 0.3mm) with a maximum bending radius of 1.4mm. The door frames may be built into the brick or block walls using corrugated “ T ” Anchors not welded to the frame (first fix). Frames may also be fixed on plastered openings with the help of Metallic Expansion Shield with counter sunk screw (second fix). Door Frames are supplied to knock-down form with butt joints for bolted assembly at site. Constructed from 1.20mm thick galvanized steel sheet formed to provide a 45mm thick fully flush, double skin door shell with lock seam joints at stile edges. Internal Reinforcements are provided at top, Bottom and Stile Edges for Fire Rating. The internal construction of the door is a specially designed Honey Comb structure with reinforcements at top, bottom and stile surrounds. The internal construction of the door varies with the degree of Fire Rating as tested. For doors having overall height in the excess of 2300mm the shutters shall essentially have double latching. The door frames and door shutters are primed with Epoxy Zinc-Phosphate with thermosetting and finished with Polyurethane paint. Fire rated stainless Steel Ball Bearing Butt Hinges 3mm thick are fixed flush to the frame & shutter. Fire rated stainless Steel Ball Bearing Butt Hinges 3mm thick are fixed flush to the frame & shutter. Fire rated Mortise Sash Lock with Lever Handles/Panic devices , Panic Trim, Mortise Dead Bolt, Mortise Latch etc can be provided as required. Concealed extended lever action flush bolts provided on the top of the door to the leading stile edge including cost of all materials, all labour sundries etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge.
1
-
-
Building Proper
176.09
-
20297.57
Electric Panel room
5.76
-
20297.57
Supply and installation of tested fully glazed fire rated Latched (Single & double leaf ) door system with 120 minutes of integrity and radiation control (EW 120) with symmetrical (Bi-Directional) fire protection. The frames shall be imported cold rolled Forster profiles from Switzerland using DX52D+Z275-M-A-O steel sheets (As per EN standard EN 10327). The door frames are cold rolled from 1.5 mm steel sheet to form a profile of 50 mm x 50 mm on all sides. The door shutter would have the top rail, side rail and bottom rail dimensions of 50 mm x 50 mm. The overall door opening shall be as per tested evidence and tested as per EN 1634-1 in an accredited international laboratory. System EI to be added after fire test. The system should be installed by certified installer. The glass should be Contraflam Lite 14mm clear 120 min fire rated for Integrity, Radiation control (EW 120) and partially insulation (EI 20) Non Wired Toughened Interlayered glass with a light transmission of 86% and a sound reduction of 38 dB and manufactured in UL & TUV audited Facility and including UL-EU Certification and compliant to class 1(B)1 category of Impact Resistance as per EN 12600. The glass shall provide bi-directional (Symmetrical) fire protection. The shutters should be fixed to the frame using Forster Weld-on hinges of dimensions 179mm X 20mm. The profiles shall have groves to incorporate Fire Resistant CR gaskets. The doors shall incorporate drop down seal at the bottom. The glass should be held in its place with the help of 1.5 mm cold rolled steel beading and Kerafix 2000 ceramic tape with cross section of 4 x 15 mm as per the test evidence. Beading shall be clipped on using Stainless Steel self-tapping screws fixed at a distance of 70 mm from the edges and 150 mm c/c henceforth. The glass panes are to be supported on non-combustible 6 mm Calcium Silicate setting blocks. The door should be fitted with two point Forster latch lock and door closer of Dorma (TS 63V, TS 83V, TS93V), Geze (TS 2000NV) or equivalent. The inactive leaf should be fixed to the frame using tower bolt at meeting edge at top as per the tested evidence with automatic door stopper. The doors shall be manufactured in a TUV audited facility. The doors shall offer C4 level of wind resistance when tested as per EN12211 and shall provide class 4 level of air permeability as per EN 1026. The door shall also be subjected to durability tests as per EN 12400 for C5 classification (200,000 cycles). The doors shall also be tested for class 5 of impact resistance when tested as per EN 13049. The doors shall also be tested for class 4 level of Mechanical strength when tested as per EN13115. The doors shall have water tightness level of 8A when tested as per EN 1027 etc al complete as per direction of EIC. (MAKE: Saint-Gobain/ IGI/MPP/ EQUIVALENT)
1
-
-
Building Proper
26.78
-
48000
Supplying & fixing in position Toilet Cubicle with ANTI BACTERIAL PROPORTY (of following standard dimension which includes 600mm door size width) made of heat, bacteria, water, chemical, scratch impact and anti bacterial resistant 12mm thick solid compact laminate panels properly tested . Finish of the compact laminate should be suede/ *Raw silk, which includes doors, pilasters & intermediate panels finished with approved texture/shade as per the detail drawings & as per IS 2046 (Indian Standard) and as per fire retardant BS-476/97 standard. The product should have Green Guard Certificate. This also includes providing and fixing in position necessary hardware made out of Stainless steel (Grade 304) & Aluminium powder coated top rail as per manufacturer’s specifications & Architects instructions like (1) SS Door Knob, (2) SS Gravity hinges, (3) SS Thumb turn lockset indicators, (4) Aluminum Powder Coated Top Rail, (5) SS Coat Hooks, (6) Aluminium anodised U-Channels, (7) SS Adjustable Foot, (8) Noise Deafening Tape etc. (9) Screws & wall Plugs.
The top fitting should consist of Aluminium Powder Coated top rail which will get fixed with Mid & End pilasters. All other hardware & screws will of stainless steel in 304 Grade with satin finish. Top rail is extruded Aluminium will be powder coated or anodized (Grade 6063 Micron Aluminium). All pilasters are supported by stainless steel adjustable footing with non corrosive steel inserts.
1
-
-
Toilet Cubicle with standard dimension of 1995mm Height x 1000mm Width x 1550mm Depth, which includes 600mm door size width).
1
-
-
Toilet Cubicle I-Shape (Front Partition) with standard dimension of 1995mm Height x 1000mm Width which includes 600mm door size width).
1
-
-
All aspects specified by the manufactures, Greenlam Sturdo Classique Versatile Model or equivalent.
1
-
-
Building Proper
36
-
38500
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/ Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer- In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (DSR 2021 , CODE NO : 26.86.7)
1
-
-
Building Proper
641.1
-
1246.01
Security Shade
5.1
-
1246.01
Providing, fitting & fixing of 32 mm thick flush door shutter made up with 32mm thick BWR Block board and pasted with both sides 4mm thick veneers including melamine polish at both side and including conveyance, cost & taxes of all materials & labours. The shutter fixing in all respect such as hinges, Mortice lock, handle, door clousure, including all cost, conveyance, labour, T & P, etc complete.
1
-
-
Building Proper
256.52
-
10210.36
Security Shade
1.89
-
10210.36
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement , Door handle, lock, Stopper etc and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge.
1
-
-
Building Proper
53.55
-
8000
Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete.
1
-
-
Building Proper
34.43
-
6953.65
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. (DSR 2021 , Code no: 9.121)
1
-
-
Building Proper
66.3
-
591.2
Providing and fixing to existing door frames.
1
-
-
30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. (DSR 2021 , Code no: 9.122.1)
1
-
-
Building Proper
20.25
-
3078.57
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. (DSR 2021 CODE NO 10.6.1)
1
-
-
80x1.25 mm M.S. laths with 1.25 mm thick top cover
1
-
-
Electrical panel room
10
-
2380.37
Providing and fixing ball bearing for rolling shutters. (DSR 2016 CODE NO 10.7)
1
-
-
Electrical panel room
6
-
371.45
Extra for providing mechanical device chain and crank operation for operating rolling shutters. (DSR 2016 CODE NO 10.8.2)
1
-
-
Exceeding 16.80 sqm in area
1
-
-
Electrical panel room
9.4
-
970.86
Two track two panels sliding window with Double Glazed Unit
1
-
-
Supplying and installing uPVC- Sliding windows/doors made out of lead free green profiles of approved make with a GREENLINE mark having two tracks and two sashes (shutters) with frame dimension of 58mm x 49mm and sash dimension of 61mm x 47mm x 37mm for windows with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm to 2 mm. The sash will be fitted with 5mm thick soft coated reflective toughened glass outer side with 10mm thick air gap and 5mm thick clear toughened glass inner side of Saint Gobain SKN 444 or equivalent . The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards.The profile manufacturer should be a certified member of IGBC/GRIHA and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge.
1
-
-
Building Proper
33.16
-
13840
Two track two panels sliding window with Single Glazed Unit
1
-
-
Supplying and installing uPVC- Sliding windows/doors made out of lead free green profiles of approved make with a GREENLINE mark having two tracks and two sashes (shutters) with frame dimension of 58mm x 49mm and sash dimension of 61mm x 47mm x 37mm for windows with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm to 2 mm. The sash will be fitted with 6mm thick soft coated reflective toughened glass ST 450 of Saint Gobain or equivalent. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards.The profile manufacturer should be a certified member of IGBC/ GRIHA and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge.
1
-
-
Building Proper
35.68
-
10730
Security Shade
1.4
-
10730
Single glazed UPVC framed fixed glass window
1
-
-
Supplying and installing uPVC- Fixed windows/doors made out of lead free green profiles of KÖMMERLING make with a GREENLINE mark with frame dimension of 58mm x 52mm x 33mm for windows with corners fusion welded, fully reinforced with Galvanized steel of 1.2mm to 2mm and to be fitted with 5mm clear toughened glass. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent.
1
-
-
Building Proper
15.75
-
6080
Electric Panel room
12.6
-
6080
Providing and fixing factory made uPVC white colour Partly fixed cum partly sliding window having following dimension for fixed portion & Slidinding portion:
Fixed portion: UPVC frame having section 58mm width X 50mm Height made out of lead free green profiles of wall thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2/2.0 mm confirming suitable wind load calculations as per IS 875 with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 5mm thick clear toughened glass of approved quality etc all complete as per direction of EIC.
2-Track sliding: uPVC multi-chambered frame having section 58mm Width x 49mm Height, Glass Sash: 37mm Width x 61mm Height made out of lead free green profiles of wall thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2/2.0 mm confirming suitable wind load calculations as per IS 875 with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 5mm thick toughened Frosted glass of St Gobainof approved quality, with cost conveyance of all materials, all labour, sundries T&P etc complete in all respect as per approved drawing & direction of Engineer-in-Charge.Make: UPVC FENESTA / TORFENSTER / KOMMERLING or equivallent)
1
-
-
Building Proper
226.8
-
12560
Providing and fixing factory made uPVC white colour louvered ventilator upto 1.5m in height comprising of uPVC multi-chambered frame having section 58mm width X 50mm Height , Glass Sash: 37mm depth x 61mm Height made out of lead free green profiles of wall thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2/2.0 mm confirming suitable wind load calculations as per IS 875 with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 4mm thick pin headed glass of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.Make: UPVC FENESTA / TORFENSTER / KOMMERLING or equivallent)
1
-
-
Building Proper
27.72
-
7251.99
Supplying fitting fixing Aluminum Sun Louvers 84R system comprises of 84 mm wide and 16 mm deep roll formed out of aluminum coils. In Aluminum, Panels are made of 0.5mm thick aluminum alloy 3105/3005 and Carriers are made of 0.9mm thick aluminum alloy with cut-outs to hold panels. Aluminum panel and carrier shall be polyester powder coated with 60-70 microns. Sun louver system is a vertical or horizontal wall sun shading system. The system use 84 R panels that snap into vertically mounted frames. The frames can be mounted on the exterior of a building over window openings, along balconies or over open area on a building elevation. The vertical/horizontal frames are offered in two different designs that hold the panels at different angles of 35 and 45 degrees. The ranges of angles provide air flow, sun shading, safety from rainfall and desired visibility with cost conveyance of all materials, all labour, sundries, T&P etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge . ( make: HI-STEEL / ALUWOOD or equivalent )
1
-
-
Building Proper
25.92
-
2720.83
Supplying, Installation, testing & commissioning of GFRC ( Glass Fibre Reinforced Concrete ) Screen/Jali of approved make of thickness 25 mm ±5 mm with border thickness of 50 ±10mm pattern, design, and colour of approved make to be fixed on/between RCC /Block work Column or structural work with Dry Fixing method with appropriate frame work, using fasteners, and necessary hardware etc. in Building Façade. The element shall be made from '53 grade' Portland Cement make Birla/ 'JK Cement' or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass fibre make 'OC' or equivalent, Super plasticisers / Additives make by 'BASF' or equivalent, Polymers make 'BASF' or equivalent and U.V resistant Synthetic inorganic pigments shall be used for pigmentation make 'BAYFERROX (Germany)' or equivalent. The material casting shall take place in Synthetic Rubber / FRP Mould manufactured by Mould / Tool / Mould Grade Resin of Revex/ 'Reckli' or equivalent complete including cost, conveyance, of all materials, labour, transportation charges etc complete in all respect as per specification and direction of the Engineer-in-charge.
1
-
-
Building Proper
189
-
9149.62
DRY WALL PARTITION Supply and Installation of 70 mm thick magnesium oxide board drywall Tufbloc partition system ( Make: ANUTONE TUFBLOC or equivalent) having (high water & fire resistance) which includes two layers of tufbloc magnesia square board having square edge & size 2400 X 1200 x 10 mm to be fixed on the either side of the GI stud channel framework in horizontal position of length side board. The frame work includes Floor / Head ( FC 50 ) channels having thickness 0.06 mm length 3600 mm ,equal flanges of 32 mm & web of 50 mm fixed to floor & ceiling with suitable fasteners at 300 mm centres staggered noise & fire rated silicon sealant to caulked along the perimeter of the partition frame before fixing channels.The stud channels SC 48 having thickness 0.75 length 3600 mm , un equal flanges of 36 mm & web of 48 mm should be placed into the floor / head channels positioned vertically at 600 mm centres. Horizontal intermediate channel at 1200 mm centres to locked with the vertical studs. Extra reinforcement to be provided at openings ( doors& Window ). Apply Synthetic poly fiber 10 x 25 is 50 mm width,600/1200 mm density 1000 gsm filled between the studs & held in position by using chicken mesh wire / pasting on the board. Boarding is to done on each side of studs framework in a staggered pattern by the help of self drilling screw at 300 mm centers. After boarding of two boards jointing & finishing is to be done by joint compound. The flush look will appear after sanding the two boards joint properly to get a smooth look . The technical parameters of the boards - Density- 1000 kg / mt cube weight 10 kg/ mtsq , Fire -150 min acoustic STC - 50 db, climate OCRH - 50 ,99 Termite resistance - yes, Moister absorbent - 6.8% after 2 hr, wet expansion less than -0.02% from ambient to saturation ,Moister Movement - 0.02% Green - RC % - 30 Strength - Anti sag. Test reports of manufactures are to submitted at the time of delivering of materials. The semi glazed partition will be erected with 8 mm tk float glass glazing ( partly frusted) at various positions complete with melamine polished Teak Wood beading . The rates includes all materials, labour, transportation T&P etc complete as per direction of EIC.
1
-
-
Building Proper
625.19
-
3760
Partly Glazed Partition
1
-
-
Building Proper
1
-
-
Ground Floor
32.47
-
2798.1
Supply and installation of tested fully glazed fire rated fixed partition with 120 minutes of integrity and radiation control (EW 120) with symmetrical (Bi-Directional) fire protection. The frames shall be imported cold rolled Forster profiles from Switzerland using DX52D+Z275-M-A-O steel sheets (As per EN standard EN 10327). The frames are cold rolled from 1.5 mm steel sheet to form a profile of 50 mm x 50 mm on all sides. The system shall be tested as per EN 1364-1 in an international accredited laboratory. The glass should be Contraflam Lite 14mm clear 120 min fire rated for Integrity, Radiation control (EW 120) and partially insulation (EI 20) Non Wired Toughened Interlayered glass with a light transmission of 86% and a sound reduction of 38 dB and manufactured in UL & TUV audited Facility and including UL-EU Certification and compliant to class 1(B)1 category of Impact Resistance as per EN 12600. The glass shall provide bi-directional (Symmetrical) fire protection. The glass should be held in its place with the help of 1.5 mm cold rolled steel beading and Kerafix 2000 ceramic tape with cross section of 4 x 15 mm as per the test evidence. Beading shall be clipped on using Stainless Steel self-tapping screws fixed at a distance of 70 mm from the edges and 150 mm c/c henceforth. The glass panes are to be supported on non-combustible 6 mm Calcium Silicate setting blocks. The maximum glazing size shall be as per the test certification. The profile has to be fixed to the supporting construction by means of M10 or bigger steel bolts at every 150 mm from the edges and every 500 mm (approx.) c/c. The Partitions shall offer C4 level of wind resistance when tested as per EN12211 and shall provide class 4 level of air permeability as per EN 1026. The Partitions shall also be tested for class 5 of impact resistance when tested as per EN 13049. The Partitions shall also be tested for class 4 level of Mechanical strength when tested as per EN13115. The Partitions shall have water tightness level of 8A when tested as per EN 1027 etc all complete including all hardware , fixtures as per direction of EIC.
1
-
-
Building Proper
1
-
-
Second floor
135.53
-
35000
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1
-
-
Building Proper
3681.18
-
292.9
Electrical panel room
124.69
-
292.9
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi - metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the
purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.
1
-
-
Building Proper
474.79
-
7206.87
Supply & Fixing of NCL Roll Formed Section for Structural Glazing made of galvanized steel colour coated/power coated (Base Steel as per IS 513 ‘D’ quality galvanized thickness of 0.72mm. The Glass holding section made of 304 grade stainless steel of 0.6mm thick. CRCA sections with Polyurethane Coating are to be used as stiffeners inside the CCS section as per the design requirement. Paint Specifications: Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with a Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50- 60 microns thick. Dimensions of Sections: The sections are to be of 100x50 mm for frame verticals, 33x57 mm for frame horizontals, section for reinforcement should be of 31x55 mm / 48x98 mm (CRCA). Glass holding section should be of 32.5x37 mm for top and bottom grids, in between should be of 32.5 x 18mm.Tophunged Shutter Section should be 33 x 57 mm .Glass Should be used 5mm Reflective Toughened including all fitting , fixtures, hardwares etc all complete as per direction of EIC. (Single Glazed Strl. Glazing)
1
-
-
Building Proper
483.15
-
9985
Supply & Fixing of NCL Roll Formed Section for Structural Glazing made of galvanized steel colour coated/power coated (Base Steel as per IS 513 ‘D’ quality galvanized thickness of 0.72mm. The Glass holding section made of 304 grade stainless steel of 0.6mm thick. CRCA sections with Polyurethane Coating are to be used as stiffeners inside the CCS section as per the design requirement. Paint Specifications: Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with a Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50- 60 microns thick. Dimensions of Sections: The sections are to be of 100x50 mm for frame verticals, 33x57 mm for frame horizontals, section for reinforcement should be of 31x55 mm / 48x98 mm (CRCA). Glass holding section should be of 32.5x37 mm for top and bottom grids, in between should be of 32.5 x 18mm.Tophunged Shutter Section should be 33 x 57 mm .Glass Should be used 5mm Reflective Toughened+5mm Clear Toughened in between 0.36mm PVB Laminated including all fitting , fixtures, hardwares etc all complete as per direction of EIC. (Double Glazed Strl. Glazing)
1
-
-
Building Proper
333.41
-
11750
Supply & Fixing of NCL Roll Formed Section for Swing Door made of galvanized steel colour coated/power coated (Base Steel as per IS 513 ‘D’ quality galvanized thickness of 0.72mm. The Glass holding section made of 304 grade stainless steel of 0.6mm thick. CRCA sections with Polyurethane Coating are to be used as stiffeners inside the CCS section as per the design requirement. Paint Specifications: Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with a Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50- 60 microns thick. Dimensions of Sections: The sections are to be of 33x57 mm for External Frame, shutter should be with sections of 46x52mm and 46x46mm and lock rail should be of 23x130mm.The Frame & Shutter Sections should be cut to length and mitre joined with Corner Bracket made of CRCA electroplated. Mullion Section should be joined with Frame/ Mullion using Nylon Mullion Cap Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter, between frame and glazed shutter and both sides of fixed glass.Handle/lock, floor of approved quality. Gasket made of Ethyl Propylene Diamine Monomer bracket.Glass shutter should be provided with a glass of 5mm Plain Float Glass including all fittings, fixtures, hardwares etc all complete as per direction of EIC
1
-
-
Building Proper
13.77
-
6450
WALL PANELING WITH WOODEN SLAT HDF PLANK (FIRE RESISTANCE)
1
-
-
Supply & installation of wall paneling of wooden slats (2440 mm x 128 mm x 16 mm thick) surco high density fiberboard made out of pure pinewood particles , Fire Resistance - (Class 1 )Pink in colour core with 5 test Fire Resistance BS 476 part 5 , BS 476 part 6 , BS 476 part 7 ISO 1182. ASTM E662 Smoke Density - laminated finish, perforated wooden grooved HDF slats L16-2 (2 mm grooves @ 8 mm centers),tongue-groove edge for a seamless look of lineal dimension size (2440 mm x 128 mm x 16 mm thick) having density 700 Kg /m3, weight -9 Kgs/m2 with back fleecs from soundtex Germany nonwoven acoustic to be pasted on slats surco is to be installed by using GI strut system. The technical parameters are as follows Core Variants - Fiberboard, Climate (OC RH) – 50, 70 Light reflectance – 75%,Green (RC %) – 25, Hygiene (VoC, Clean room) – Low, Class 1,Strength, Load capacity (Kg) - Anti sag, Ball-Impact. The wall paneling system shall include GI Wall channel (CC22) having thickness 0.45mm, length 3600mm, unequal flanges of 15 & 20mm and web of 22mm should be fixed on the wall with nylon sleeves and suitable fasteners at every 300mm centers, in the direction perpendicular to each other at every 600mm centers upto the desired height. Synth poly fiber PF 5 x 50 wool of 500 gsm to be filled between the horizontal & vertical studs as in filler with the help of wire / stick 7 adhesive. The framework will maintain 38 mm gap from the walls. Now clad the wooden slats surco on the CC 18 with the help of center & edge clips to get better locking of slats. The tongue & groove are to be properly aligned to get flush look . Test certificate of the use products shall be submitted after procurement of materials.
1
-
-
Building Proper
245.85
-
4480
SITC of Acoustic wall panelling of soak plane having NRC 0.71, fire class 1&P, density400kg/cum, Green VoC low, RC% low, Climate 0 degreee centigrade of size 1200mmX600mmX20mm to be fixed horizontally on CC25 GI channel/ aluminium channel of 50mmX25mm which area to be fixed vertically up to the appropriate height in three lines in the centre portion of the pillar at 300mm centre to centre leaving 0.45m on both side up to full height. The channel will be screw fixed with 50X10 PVC wall grip & 50X10 ND screw. The H-spline system is horizontally fixed on the CC25/aluminium channel by 25mm driver screw. The soak plane panel will be slutted-in to the H-spline system groove & pressed till the spline edge goes fully into the the panel. Then one more H-spline channel of1200mm of length to be pushed on the upper side of the panel & screwed properly, so likewise the installation of panels goes up. The cost includes all materials, labour, conveyance, scaffolding, T&P etc complete in all respect as per direction of EIC.
1
-
-
Building Proper
491.7
-
5075.68
Supply and Installation of false ceiling 8 mm thick Tufbloc magnesium oxide HDFR boards ( Make: ANUTONE TUFBLOC or equivalent) of size 600 x 600 mm having Density-1000 kg/mt cube, with STC- 34 – 50, weight - 8.5 kg /sq mt, Fire Class - 1&P & Thermal Heat Resistance - 0.11792 W/mK Climate ( degree Centigrade , RH - 50-95 , Green VoC , RC% - Low & 30 Water resistant with wet expansion less than -0.02% from ambient to saturation, Moisture Movement - 0.02% from Anutone / Win Win / Magnum are to be fixed with Philips head screw is fixed by using concealed ceiling system. The concealed ceiling system shall include GI Wall channel(WC 25) having thickness 0.45 mm, length 3600 mm, unequal flanges of 15 & 20 mm and web of 22 mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300 mm centers. Then suspend Main channels(MC 45) having thickness 0.9 mm, length 3600 mm, equal flanges of 15 mm and web 45mm from the soffit at every 1200 mm centers with Suspender angle(SA 25) having thickness 0.45 mm, unequal flanges of 25 & 10 mm. GI Cross channel(CC 25) having thickness 0.45 mm, length 3600 mm, knurled web 35mm, depth of 25 mm and equal flanges 9.5 mm is fastened to the Main channel in the direction perpendicular to the Main Channel at every 600mm centers. Now the jointing & finishing of the same will be done by using Anutone jointing kit consist of powder mixed with water and apply the same with flat flap on the boards joints to finish the surface of the boards so as to look flush. Apply synthetic poly fiber PF 5 x 50 acoustic wool of 50 kg density to be kept on the top of the ceiling by laying on the framework with coist, conveyance, of all materials, labour and T&P required for the work etc. complete in all respect as per direction of Engineer-in-charge. Test certificate of the use products shall be submitted after procurement of materials.
1
-
-
Building Proper
3426.28
-
1907.24
CEILING WITH PIXELSQUIRE on GRID SYSTEM (Acoustic False ceiling)
Supply and Installation of false ceiling 12.5 mm gypsum perforated square edge 10/20 ( 10 mm square perforated 20 mm pitch TOA - 15 % ) gypsum tiles ( Make: ANUTONE TUFBLOC or equivalent) having the technical parameters are as follows : Core - GFR gypsum, Fire – Class A & P, Acoustics – NRC 0.80,Climate (degree C RH) – 50, 90, Light reflectance 80 %,Green (RC %) – 25, Hygiene (VoC, Clean room) – Low , having pixel size 10X10 mm square perforated at 20 mm center tile of size 595 x 595 x 12.5 mm having density 700 Kgs/ m3, weight - 8 kg/m2 . The concealed ceiling system shall include GI Wall channel(WC 25) having thickness 0.45 mm, length 3600 mm, unequal flanges of 15 & 20 mm and web of 22 mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300 mm centers. Then suspend Main channels(MC 45) having thickness 0.9 mm, length 3600 mm, equal flanges of 15 mm and web 45mm from the soffit at every 1200 mm centers with Suspender angle(SA 25) having thickness 0.45 mm, unequal flanges of 25 & 10 mm. GI Cross channel(CC 25) having thickness 0.45 mm, length 3600 mm, knurled web 35mm, depth of 25 mm and equal flanges 9.5 mm is fastened to the Main channel in the direction perpendicular to the Main Channel at every 600mm centers. Now the jointing & finishing of the same will be done by using jointing kit consist of powder mixed with water and apply the same with flat flap on the boards joints to finish the surface of the boards so as to look flush. Apply synthetic poly fiber PF 5 x 50 acoustic wool of 50 kg density to be kept on the top of the ceiling by laying on the framework. Test certificate of the use products shall be submitted after procurement of materials. The cost includes all materials, labour, conveyance, scaffolding, T&P etc complete in all respect as per direction of EIC.
1
-
-
Building Proper
450.85
-
3107
SITC of Sunken floor treatment
1
-
-
Stage 1 :Cleaning of concrete surface to remove dust, oil, grease including removal of laitance and cleaning with compressed air. Repairing surface irregularities, damaged concrete, if any, with Sika Latex modified repair mortar including a coat of bonding agent. Stage 2: Supply and application of 1:3 cement – sand mortar, mixed with SikaTop 77 – the polymer modified high quality emulsion, as a coving at the corners of floor and the vertical surface in the sunken area, and between floor and walls in the remaining area.
Stage 3: Supply and application of SikaTop Seal 107 – the cementitious, flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area, taking the coating over the vertical surfaces on to the floor and over the coving on to the wall (before tiling) to at least 300mm above the final finished floor level. The coating shall also be continued on to the inner surfaces of the pipe penetration holes. Two coats shall be applied.
Few parameters: Chemical Base Part A: liquid polymer and additive
Part B: portland cement with selected aggregate and additive, Density Fresh slurry density: ~ 2.00 kg/l at +27ºC, Layer Thickness 1.5 mm – 2.0 mm average, Water Vapour Resistance 3 g /m2 / day
Mechanical / Physical Properties 3 days ~ 2 N/mm2, 28 days ~ 20 N/mm2
Compressive Strength Above values at +27ºC, Tensile Strength ~ 4.56 N/mm2 after 14 days exposure (According to ASTM D 2370), Bond Strength 2.0 N/mm2 at +27ºC (failure in substrate), Elongation at Break With Sika® Fab-1, 8-10 %
Stage 4: Providing & filling the gap between the PVC pipe & the Concrete by pouring Free floow non shrink SikaRepmicrocrete 4 followed by Providing Sikagard 694F(I), a moisture insensitive epoxy putty in a continuous, 10mm thick gasket around the pipes to a width of approximately 15mm.
Stage 5: Providing a 15mm thick plaster on the waterproof coating by mixing an integral waterproofing compound, Plastocrete Plus @ 100gms per bag of cement etc complete in all respect including cost of all materials, all labour, T&P, transportation, taxes etc. as per direction of EIC. ( Make: Sika or equivallent)
1
-
-
Building Proper
281.4
-
500
Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. lead complete (sludge measured in stacks will be reduced by 8% for payment).
1
-
-
Landscaping
207.17
-
237.9
Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) :
Screened through sieve of I.S. designation 20 mm
1
-
-
Landscaping
103.58
-
160.78
Rough dressing the trenched ground including breaking clods.
1
-
-
Landscaping
2071.65
-
0.6
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. Details of cost for 100 sqm
1
-
-
Landscaping
2071.65
-
1.87
Fine dressing of the ground. (Details of cost for100 sqm)
1
-
-
Landscaping
2071.65
-
1.46
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.
1
-
-
Landscaping
621.49
-
13.74
Grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).
1
-
-
Landscaping
2071.65
-
6.64
Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, with sprinkler and maintenance for 30 days or more till the grass established properly as per direction of officer in charge.
1
-
-
Landscaping
2071.65
-
72.94
P.H works
1
-
-
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
1
-
-
Ground Floor
1
-
-
20mm dia C-PVC pipe (Ashirbad/Supreme)
50
-
240.5
25mm dia C-PVC pipe (Ashirbad/Supreme)
50
-
328.8
50mm dia C-PVC pipe (Ashirbad/Supreme)
80
-
1041.9
In 1st Floor
1
-
-
20mm dia C-PVC pipe (Ashirbad/Supreme)
60
-
248.5
25mm dia C-PVC pipe (Ashirbad/Supreme)
60
-
336.8
32mm dia C-PVC pipe (Ashirbad/Supreme)
30
-
505.8
50mm dia C-PVC pipe (Ashirbad/Supreme)
20
-
1053.6
In 2nd Floor
1
-
-
20mm dia C-PVC pipe (Ashirbad/Supreme)
40
-
256.5
25mm dia C-PVC pipe (Ashirbad/Supreme)
50
-
344.8
40mm dia C-PVC pipe (Ashirbad/Supreme)
30
-
696.79
50mm dia C-PVC pipe (Ashirbad/Supreme)
20
-
1065.4
In 3rd Floor
1
-
-
20mm dia C-PVC pipe (Ashirbad/Supreme)
50
-
264.5
25mm dia C-PVC pipe (Ashirbad/Supreme)
60
-
352.8
40mm dia C-PVC pipe (Ashirbad/Supreme)
30
-
708.5
50mm dia C-PVC pipe (Ashirbad/Supreme)
20
-
1077.1
In 4th Floor
1
-
-
20mm dia C-PVC pipe (Ashirbad/Supreme)
55
-
272.5
25mm dia C-PVC pipe (Ashirbad/Supreme)
65
-
360.8
40mm dia C-PVC pipe (Ashirbad/Supreme)
30
-
720.3
50mm dia C-PVC pipe (Ashirbad/Supreme)
50
-
1088.89
In 5th Floor
1
-
-
20mm dia C-PVC pipe (Ashirbad/Supreme)
45
-
280.5
25mm dia C-PVC pipe (Ashirbad/Supreme)
50
-
368.8
40mm dia C-PVC pipe (Ashirbad/Supreme)
30
-
732
50mm dia C-PVC pipe (Ashirbad/Supreme)
20
-
1100.6
In 6th Floor
1
-
-
40mm dia C-PVC pipe (Ashirbad/Supreme)
20
-
743.7
50mm dia C-PVC pipe (Ashirbad/Supreme)
80
-
1112.3
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
1
-
-
250mm thick wall in Ground floor
10
-
45.6
In 1st Floor
10
-
46.4
In 2nd Floor
10
-
47.3
In 3rd Floor
10
-
48.2
In 4th Floor
10
-
49.4
In 5th Floor
10
-
50.6
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor
5
-
154.3
In 1st Floor
5
-
155
In 2nd Floor
5
-
155.8
In 3rd Floor
5
-
156.9
In 4th Floor
5
-
157.9
In 5th Floor
5
-
159.2
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor
100
-
165.7
In 1st Floor
120
-
170.6
In 2nd floor
90
-
176.1
In 3rd Floor
110
-
182.4
In 4th Floor
120
-
189.5
In 5th Floor
95
-
197.6
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge
1
-
-
250mm to 375mm thick wall
1
-
-
in 1st Floor to 7th Floor
90
-
176.4
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge
1
-
-
15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
12
-
1451.9
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
110
-
861.3
20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
12
-
1132
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
37
-
1255
15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
37
-
1648.7
15mm dia CP extension piece
281
-
59.3
15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
35
-
1156.6
25mm dia G.M or Brass F.W valve (Sakti make)
30
-
926.1
32mm dia G.M or Brass F.W valve (Sakti make)
10
-
1355.6
40mm dia G.M or Brass F.W valve (Sakti make)
10
-
1722.1
125mm dia CP gratings
90
-
82.7
15mm CP revolving shower (Jaquar)CON-CHR-209KN
6
-
1574.9
50mm dia G.M or Brass F.W valve (Sakti make)
8
-
2551.3
Pillar cock(Jaquar-CON-CHR-5031N
41
-
2140.9
15mm dia CP Bib cock(Jaquar-CON-CHR-5043N
12
-
2288.5
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge
1
-
-
10 litres PVC L.L. Cistern (Slimline-white)
36
-
1486.6
Supplying all materials, labour, T&P and fitting and fixing C.I.(Hubeless)soil waste ventilating pipes and fittings of the following with suitable clamps having provision for removal diameter conforming to ISI No. 15905 to walls with shelded(S/S) coupling with EPMD rubber gasket method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge
1
-
-
75mm dia C.I. pipe (NECO make)
12
-
865.5
75mm C.I. plain bend(NECO make)
20
-
232
100mm dia C.I. pipe (NECO make)
600
-
1064.7
100mm C.I. door bend(NECO make)
15
-
518.3
100mm C.I. door Tee(NECO make)
120
-
1831.4
100mm C.I. offset(NECO make)
20
-
503.5
100mm C.I. plain bend(NECO make)
20
-
538.1
100mm C.I. cowl(NECO make)
20
-
404.8
100mm C.I. P trap(NECO make)
73
-
789.8
100mm S/S coupling with EPMD
250
-
365.3
75mm S/S coupling
40
-
331.7
W/C connector
50
-
552.9
S/S/G.I.Clamp
300
-
69.9
100mm C.I. door Cross Tee(NECO make)
18
-
923.1
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Nycer,parryware make)
1
-
-
580mm size Orissa pan(Hindware/Parryware/Neycer)
12
-
2256.3
Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge.
1
-
-
Halfstall Urinal(Parryware/Hindware/Neycer)
30
-
3325.2
15mm dia Urinal spreader
30
-
286.6
32mm dia CP Dome waste`
30
-
128.5
Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge
1
-
-
Fixing of squatting urinal (Parryware/Hindware/Neycer)
6
-
2804.5
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.
1
-
-
E.W.C. with seat cover (Parryware/Hindware/Neycer)
24
-
511.7
One piece commod(Hindware)ELEMENT Cat No.92084.
13
-
19991.6
EWC(Matrix set)No.70002(P-18)
6
-
66589.4
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge
1
-
-
550mm x 400mm size W. H. Basin with Porcelain Pedestal (Parryware/Hindware/Neycer)
6
-
3902.9
Under Counter basin(560x450)Hindware-No.10095
28
-
3868.4
Halfpedestal basin(560x450)Hindware No.91049+91115
7
-
7717.1
Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge
1
-
-
600mm x 450mm size B.E mirror
6
-
657.6
Large size mirror with frame(70x0.90x0.90)
1
-
-
28x0.60x0.90=
15.12
-
1762.5
Design mirror(Parryware)
7
-
1553.7
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
1
-
-
600 x 125mm plate glass shelf with CP guard rails(Jaquar)AKP-CHR-35771P
13
-
1698
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
1
-
-
25mm x 600mm long CP towel rail(Jaquar)ACN-ACR-1111N
20
-
1919.4
CP towel Ring(Jaquar)ACN-ACR-1121N
30
-
2091.7
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
1
-
-
CP soap holder (Jaquar)ACN-ACR-1131N
2
-
1058.1
SOAP DISPENSER WITH GLASS BOTTLE (Jaquar)ALD-BCH-769L250X190MI
6
-
2067.1
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge
1
-
-
600 x 450 x 250mm size S/S kitchen sink (Jayana make )
6
-
4892.7
Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor
13.55
-
327.3
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
5.24
-
4160.6
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard granite chips broken including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. In Ground Floor
5.24
-
5900.2
In 1st Floor
5.67
-
6200.6
In 2nd Floor
5.29
-
6546.1
In 3rd Floor
5.99
-
6943.4
In 4th Floor
6.02
-
7400.4
In 5th Floor
5.29
-
7925.9
Supplying all materials, labour, T&P and providing cement flush pointing with C.M (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1
-
-
In Ground Floor
147.55
-
142.3
In Ist Floor
179.68
-
146
In 2nd Floor
147.55
-
155.8
In 3rd Floor
179.68
-
166
In 4th Floor
180.1
-
177.2
In 5th Floor
147.55
-
189
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including cement punning,watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1
-
-
In Ist Floor
68.02
-
160.7
In 2nd Floor
59.9
-
164
In 3rd Floor
68.06
-
167.6
In 4th Floor
68.29
-
171.2
In 5th Floor
68.29
-
174.9
Supplying the waterproofing material Pidifin 2K of Dr.fixit on equivalent water proofing material and appling in two coat over the concrete floor and dado upto 1"-6" in wall including cleaning,applying and mending as per specification including all labour charges as per direction of Engineer-in-charge.
1
-
-
In Ist Floor
68.02
-
248
In 2nd Floor
59.9
-
248
In 3rd Floor
71.51
-
248
In 4th Floor
68.29
-
248
In 5th Floor
68.29
-
248
Supplying all materials, labour, T&P and providing and filling cynder including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1
-
-
In 1st Floor
14.58
-
555.75
In 2nd Floor
13.43
-
555.75
In 3rd Floor
15.53
-
555.75
In 4th Floor
15.61
-
555.75
In 5th Floor
13.43
-
555.75
Supplying all materials, labour, T&P and providing Vetrified mat finish tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc complete as per direction of the Engineer in charge. (vitrified tiles of size 600x600 of make- Kajaria/Somany/Johnson/Orient Bell/Rak plain/printed series to be pre-approved by the Engineer in charge)
In Ground Floor(Kajaria-Fogparla or equivalent make)
44.49
-
1297.8
In 1st Floor
48.29
-
1325.8
In 2nd Floor
44.76
-
1355.1
In 3rd Floor
51.74
-
1386
In 4th Floor
52.02
-
1416.9
In 5th Floor
44.76
-
1447.8
Supplying all materials, labaour, T&P and fixing ceramic glazed tiles in dados skirting on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed ith pigments to match the shades of the tiles etc. complete as per direction of the Engineer-in-charge.(ceramic vitrified Glazed tiles in wall of size 600x300 ) of make Kajaria/Somany/Johnson/Orient Bell/Rak) plain/printed series to be pre-approved by the Engineer-in-charge. in Ground Floor(Kajaria-Durenmarfil or equivalent make)
1
-
-
In Ground Floor
147.55
-
1489.6
In Ist Floor
179.68
-
1522.6
In 2nd Floor
147.55
-
1557.1
In 3rd Floor
179.68
-
1593.5
In 4th Floor
180.1
-
1629.9
In 5th Floor
147.55
-
1666.3
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
90.41
-
3430.6
Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
361.95
-
1114.3
Finishing wall surface of walls with providing two coats wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.
1
-
-
In Ground Floor
45.41
-
91.5
In Ist Floor
59.18
-
91.5
In 2nd Floor
45.41
-
91.5
In 3rd Floor
59.18
-
91.5
In 4th Floor
59.36
-
91.5
In 5th Floor
52.07
-
91.5
Supplying all materials, labour, T&P and distempering two coats to walls with distemper of approved shade on new work to give an even shade etc all complete as per specification and direction of the Engineer in charge
1
-
-
In Ground Floor
45.41
-
64.1
In Ist Floor
59.18
-
64.1
In 2nd Floor
45.41
-
64.1
In 3rd Floor
59.18
-
64.1
In 4th Floor
59.36
-
64.1
In 5th Floor
52.07
-
64.1
Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
11
-
1396
Supplying all materials, labour, T&P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
1
-
-
Inside size 760mm x 760mm x 460mm
12
-
8292.8
Fitting and fixing RCPC cover slab (0.45m dia)
12
-
1093.1
Supplying all materials, labour, T&P and providing kodappa slab in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge
105.3
-
997.1
Supplying all materials, labour, T&P and providing granite tiles in slab, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge
105.3
-
2595.6
Construction of 30000 Liters RCC Over head Tank of Outside size- 5.50 X 4.80 X1.50m(Domestic & Fire fighting)-In Sixth floor
1
-
-
Supplying all materials, labour,T&P and providing cement concrete (1:1.5:3) for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete.
16.77
-
8223.1
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
16.77
-
8397.5
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.
50.18
-
962.3
RCC Beam, Column, wall etc
91.61
-
1879
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
60.02
-
179.4
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
60.02
-
36.7
Providing fitting and fixing stainless steel ladder including fixing to wall necessary welding etc. complete
100
-
323.7
Providing fitting and fixing MS cover made out of MS angle and sheet duly welding and fixing with frame and hinges along with locking arrangement of size 60cmx60cm etc complete as per direction of Engineer-in-charge
40
-
69.9
EXTERNAL PH WORK
1
-
-
Sinking of 200mmx150mm dia Bore Well through DTH method.- 2 Nos.
1
-
-
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
1
-
-
Drilling of 200mm dia bore 0 to 30 mtr
60
-
782.6
Drilling of 200mm dia bore 31 to 45 mtr
30
-
782.6
Drilling of 150mm dia bore 41 to 125 mtr
160
-
782.6
Labour for lowering the following size of PVC casing pipes with or without slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted and set up in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplyinging and fixing of all jointing materials ,extra sockets and T&P etc. all complete and keeping the top of casing pipe threaded including plugging the tubewell to prevent entry of foreign materials
1
-
-
Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs
60
-
180.5
Lowering of 200mm dia PVC casing pipes 31 mtr to 45 mtrs
30
-
180.5
Cost of 200mm dia PVC schedule - 80 pipe
161
-
1775.6
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
2
-
6586
Supplying all materials,labour,T&P and providing around sealing by cement concrete grouting of annualr space around GI/PVC housing pipe upto 5 mtr below ground level ( as per drawing ) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer-in-charge . Mimimum one meter of casing pipe to nserted in the bore in to the rock the bottom to ensure sanitary sealing ( excluding cost of cement which willbe supplied by the Department )
1
-
-
Sanitary sealing upto 5 mtr below ground level
2
-
1173.1
CC(1:2:4) with 12mm chips for grouting up to 5 mtr Depth in
1
-
-
1x5x3.14x(0.15-0.10)
0.4
-
5900.2
Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.
1
-
-
5HP Three Phase 5 stage submersible pump set.
2
-
24391.5
DOL control panel
2
-
3805.5
50mm S. S. Nipple, S. S. bolt & clips
4
-
1000
50mm M. S. Clamp, Bend, Socket & 200mm M. S. well cap
2
-
1200
2.50mm Sqm Submersible flat cable
300
-
128.1
Steel rope with cover
120
-
26.7
20mm dia rigid U-PVC pipe
60
-
6.9
50mm dia HDPE pipe
120
-
181.8
Labour charges for lowering, testing, commissioning & transportation to site etc.
2
-
2000
Supply all materials, labour, T&P and providing, fitting and fixing of centrifugal pump set to run on 3phase/1phase line voltage ranging from 320 volt to 450 volt with suitable control pannel, jointing with GI/ PVC/ HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.
1
-
-
5 HP 3 phaseHorizontal submerssible pump set.
2
-
24391.5
DOL control panel
2
-
3805.5
Labour charges for lowering, testing, commissioning & transportation to site etc.
2
-
2000
Supplying all materials, labour, T&P and providing and laying in trenches PVC ASTM pipe of the following nominal bore, tube fittings, testing all complete as per specification and direction of the Engineer in charge
1
-
-
75mm dia PVC ASTM
30
-
620.3
50mm dia PVC ASTM
300
-
398
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes of the following nominal bore and pipe fittings with clamps including making good the wall and testing as per specification and direction of the Engineer in charge
1
-
-
50mm dia CPVC pipe (sch-80)
10
-
1041.9
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
1
-
-
300m x 0.45m x 0.60m =81.00
81
-
204.2
Supplying all materials, labour T&P and fitting and fixing brass/CP/PVC fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.
1
-
-
50mm dia Brass N. R. Valve
3
-
2081.6
50mm dia Brass Check Valve
1
-
2665.1
50mm dia Brass F. W. Valve
4
-
2551.3
Supplying all materials, labour, T&P and construction of Fullway valve chamber/Stop cock chamber of the following inside size for fullway valve with cement concrete slab (1:2:4) mix , 7.50cm thick, foundation concrete (1:5:10) and inside plastering with cement mortar (1:3) finished with a floating coat of neat cement including curing etc all complete as per approved specification and direction of the Engineer in charge
1
-
-
Inside size 250mm x 250mm x 560mm
4
-
1009.1
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
1
-
-
Inside size 910mm x 910mm x 910mm
8
-
16208.1
Addl depth
10
-
2414.3
Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
1
-
-
1.22m dia x 2.10m deep soakway pit
2
-
16101
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
1
-
-
110mm dia u-pvc pipe alround concrete
80
-
1082.1
160mm dia u-pvc pipe alround concrete
160
-
1798.7
Supplying all materials, labour, T&P and constructing circular type man hole chamber of the following size with cement concrete (1:4:8) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar (1:5), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, 12mm thick cement plaster (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
1
-
-
Circular MH inside dia 1200mmx1670mm with sides sloped upto560mm
3
-
14948
Cost of RCPC Cover
3
-
1093.1
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
1
-
-
Aquagurd Pure Chill 120 PSS UV
6
-
101295
Rain water harvesting.-2 Nos.
1
-
-
Sinking of tube well through D.T.H.Rig.
1
-
-
200mm dia- 0.0m to 30.00m
50
-
782.6
Lowering of PVC casing pipe inside bore.
1
-
-
200mm dia- 0.0m to 30.00m
50
-
180.5
Cost.of 200mm dia (Sch.80)Pipe
50
-
1775.6
Cutting slot in casing pipe for recharge of rain water
50
-
353.5
Labour for packing gravel outside the tube well
1
-
-
2x25.0mx22/28{(0.40)²-(0.20)²}=9.40
4.71
-
110.1
Cost of washed gravel.
4.71
-
1612.4
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
1
-
-
2x8.55x3.90x2.0=
133.38
-
204.2
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2.17
-
4160.6
Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
22.8
-
4350.6
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
182.4
-
149.7
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
97.2
-
31.9
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
6.26
-
426.7
Supplying all materials, labour, T&P and providing reinforced cement concrete work of M-25 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1
-
-
2x1.40x3.00x0.10=
0.84
-
5146
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.68
-
8236.8
Providing and filling filter media
1
-
-
40mm size bolder-2x6.0x2.50x0.85=
25.5
-
1414.5
20mm size washed gravel-2x6.0x2.50x0.40=
12
-
1723.5
Course sand-2x6.0x2.50x0.30=
9
-
582.5
Providing fitting and fixing M.S.grill,Jalli cover over the harvesty pindi
6
-
6990
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
1
-
-
Inside size 910mm x 910mm x 910mm
10
-
16208.1
Addl depth
6
-
2414.3
Cost of RCPC Cover
10
-
1093.1
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
1
-
-
160mm dia u-pvc pipe alround concrete
108.2
-
1798.7
200mm dia u-pvc pipe alround concrete
150
-
2154.5
Construction of 100000 Liters RCC Under ground Reserver of Inside size- 10.00x5.50x2.10m
1
-
-
Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
1
-
-
UGR - 1x11.70x7.20x1.50=
126.36
-
204.2
-do- with Ist additional depth of 1.50 m over the initial lead and lift
1
-
-
UGR - 1x11.70x7.20x1.20=
101.09
-
219.2
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
1
-
-
UGR - 1x11.70x7.20x0.30=
25.27
-
327.3
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1
-
-
UGR - 1x10.90x6.40x0.20=
13.95
-
4533.3
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
53.92
-
6593.2
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
1
-
-
@ 100 kg / cum =
53.92
-
8236.8
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.
1
-
-
RCC floor roof, chajja etc
61.6
-
426.7
RCC Beam, Column, wall etc
165.75
-
731.1
RCC Plinth bend/ Raft
1
-
-
Base slab - 2(10.90+6.40)x0.80=
27.68
-
261.2
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
139.9
-
154.5
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
139.9
-
31.9
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and lalustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
120
-
323.7
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge
2
-
1093.1
Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge.
1
-
-
Sides - 2x(10.50+6.00)x2.10=
69.3
-
235.2
De-watering
1
-
-
10 daysx 2hours x 5.0 HP pump
100
-
59
Construction 1 nos 200 users RCC Septic tank
1
-
-
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
107.14
-
204.2
-do- with Ist extra lift of 1.5 mtr over the initial lead and lift
71.19
-
219.2
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
1
-
-
In ground floor
11.47
-
327.3
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
1
-
-
In ground floor
9.04
-
4160.6
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1
-
-
In ground floor
4
-
5900.2
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1
-
-
In ground floor
43.67
-
6593.2
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1
-
-
RCC floor roof, chajja etc
45.18
-
426.7
RCC Beam, Column, wall etc
132.7
-
731.1
RCC Plinth bend/ Raft
15.21
-
261.2
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1
-
-
In ground floor
43.67
-
8236.8
Supplying all materials,labour,T&P and providing 6mm thick cement plaster(1:4) on RCC work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
75.93
-
154.5
Supplying all materials,labour,T&P and providing 12mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
8.1
-
157.4
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
2
-
346.4
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
12
-
242.5
Supplying all materials, labour, T&P and fitting and fixing RCPC cover of heavy duty etc. all complete as per specification and direction of the Engineer in charge.
2
-
1093.1
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
58.85
-
113.5
ELECTRICAL
1
-
-
INTERNAL ELECTRIFICATION
1
-
-
Sub-Head I (modular Wiring Items)
1
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor with earth wire single core cable in surface / recessed medium class PVC conduit, with modular switch, socket, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. CATAGORY AS FOLLOWS
1
-
-
Single light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-A
300
-
546
Single light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-B
288
-
774
Single light/fan/ex.f/call bell point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-C
500
-
1060
subsequent point of group control
155
-
1000
6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved.Make-Havells Crabtree/Roma/legrand,
125
-
192
6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type) cover,modular board & other required accessories of ISI marked as approved.Make-Havells Crabtree/Roma/legrand
220
-
502
2x6A Plug on the separate board For Power supply point or TV point & other use for Data center/SLDC area with complete fitting by 02 nos of 5A switch & socket(modular type) cover,modular board & other required accessories of ISI marked as approved.Make-Havells Crabtree/Roma/legrand,
30
-
854
2x6A+2X6A Plug on the separate board For computer point & other use,modular type with box & cover. Make-Havells Crabtree/Roma/legrand,
133
-
1410
Supplying and fixing 15/16A modular socket with 15/16A Switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make-Havells Crabtree/Roma/legrand,
37
-
639
Supplying and fixing 1 nos 15/16A modular socket with 15/16A Switch & 1 no 6A modular switch with socket with box & modular plate & switch box including connections but excluding modular plate etc. as required. Make-Havells Crabtree/Roma/legrand,
25
-
1250
Wiring for circuit/submain wiring with the following mentioned size FRLSH PVC insulated, copper conductor, single core cable (Finolex/ Polycab/L&T) or any other equivallent reputed make ISI marked as approved, in surface/ recessed PVC conduit medium (FRLS AKG or any other equivallent reputed make ISI marked as approved) as required.
1
-
-
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor.(LDB to LSB/LIGHT CKT) in existing conduit
688
-
128
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR)
3588
-
142
4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 1.5 sq. mm copper wire for earth continuty conductor.(LDB to LSB/5A SOCKET)
3522
-
259
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor.(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOOR CARD POINT/DG PANEL ACCL TO EACH QTR ESSENTIAL LOAD)
1850
-
159
4 nos single core 4 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor.(PDB to PSB/GAYSER. POINT/AC POINT/DG PANEL ACCL TO EACH QTR ESSENTIAL LOAD)
1566
-
241
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 4 sq. mm copper wire for earth continuty conductor.(LFDB TO LBDB)
325
-
190
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor.(LFDB TO LBDB/power unit/point)
355
-
287
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductor.(LFDB TO FLOOR PANEL TO TPN BDB)
699
-
415
4 nos single core 16 sq. mm copper wire for phase and neutral and 02 nos of single core 10 sq. mm copper wire for earth continuty conductor.(FLOOR PANEL TO TPN BDB)
800
-
629
Supplying and fixing 5/6A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. of Anchor/ legrand /Havells make.
25
-
109
Supplying and fixing 3 pin 5/6A modular socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. of Anchor/ legrand/Havells make.
45
-
114
Supplying and fixing 15/16A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ofAnchor/ legrand/Havells make. make.
88
-
164
Supplying and fixing 15/16A modular socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ofAnchor/ legrand/Havells make. make.
88
-
213
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemens make
25
-
608
Supplying and fixing 32 amps, 415 volts, TPN, industrial type socket outlet, with 4 pole and earth metal enclosed plug top along with 32 amps. C-series, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemens make
8
-
4301
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. MAKE-Legrand/L&T/Siemens
1
-
-
4 moudle(125mmx75mm)
55
-
263
1 moudle(75mmx75mm)
66
-
216
12 moudle(200mmx150mm)
89
-
478
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.MAKE KINJAL/ AKG
1
-
-
20 MM
355
-
94
25 MM
200
-
96
Supply and fixing modular type indicator on the existing switch box/cover of Anchor make.
188
-
106
Supplying and installation of AC starter Modular type,L&T make or any other equivalent reputed make as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including moudlar cover.
25
-
618
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover of Anchor make.
25
-
204
Sub-Head II (Light fitting Fixture & Fan)
1
-
-
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep with louvers (Havells make or any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection.
20
-
3070
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep with louvers (Havells make or any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection.
8
-
3621
Supplying, installation, testing and commssioning of 1400 mm sweep white/milky colour ceiling fan of Havells velocity/ CROMPTRON JURA Make or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator)
99
-
2124
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan of Havells velocity/CROMPTRON JURA Make or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator)
72
-
2112
Supplying and fixing of LED fitting with glass cover, in existing false ceiling/Surface wire guard etc. of HAVELLS,MODEL: PLUTO NEO 2X2 PLR42WLED840S make /PHILIPS MAKE make or any other reputed make of approved quality including supply and fixing of led lamp with connection etc. as required.
500
-
4148
Supplying and fixing of Surface type LED fitting with glass cover, wire guard etc. of 21W of HAVELLS ENDURANEOSURFACEDLS21WLED857S/PHILIPS MAKE /PHILIPS/WIPRO or any other reputed make of approved quality including supply and fixing of LED with connection etc. as required.
200
-
1513
Supplying & installation, testing and commissioning of prewired, LED TUBE fittings with one No 1x20w watt,6K LED tube,of HAVELLS MODEL: LUMILINE 20W LED 865/PHILIPS MAKE OR any other equivallent reputed make ISI marked as approved) with all accessories and tubes etc. directly on ceiling/wall on two wooden round block, including connections with 1.5 sq mm PVC insulated, copper conductor, single core cable etc.as required.
88
-
792
Supplying & installation, testing and commissioning of prewired, LED TUBE fittings with one No 2x20w watt,6K LED tube,ofHAVELLS MODEL: MAGNUM GRAND 40W LED 857/PHILIPS MAKE OR any other equivallent reputed make ISI marked as approved) with all accessories and tubes etc. directly on ceiling/wall on two wooden round block, including connections with 1.5 sq mm PVC insulated, copper conductor, single core cable etc.as required.
18
-
3755
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required.
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
422
-
31
Supplying and fixing of Concealed type LED fitting with glass cover, wire guard etc. of 20W HAVELLS MODEL: ENDURANEODLR18WLED830S RECESS/PHILIPS MAKE or any other reputed make of approved quality including supply and fixing of LED with connection etc. as required.
330
-
2423
Supplying and fixing of BUILDING FOCUS ARCHITECTURAL LIGHT LED fitting with OUTDOOR CANOPY mounted on outside wall of 15W HAVELLS MAKE: (1500-3000K) /PHILIPS MAKE or any other reputed make of approved quality including supply and fixing of LED with connection etc. as required.
12
-
3946
Supplying and fixing of EVENT AREA TRAK LIGHT LED fitting with glass cover, wire guard mounted in wall. of 20W HAVELLS MODEL: CYLINDRO 15W LED WITH 1 MTR 3 PHASE TRACK /PHILIPS MAKE or any other reputed make of approved quality including supply and fixing of LED with connection etc. as required.
10
-
2344
Supplying and fixing of STRIP LIGHT (Flexi type) LED fitting with driver for variable colour display, wire guard mounted in false ceiling etc. of HAVELLS MODEL: LED FLEXISTRIP 5M TRIP 2029WLED8305 (5 MTRS) (24W SMD)/PHILIPS MAKE with driver or any other reputed make of approved quality including supply and fixing of LED with connection etc. as required.
8
-
2111
Supplying and fixing of HIGH BAY down LIGHT LED fitting with glass cover, wire guard etc. of 50W HAVELLS MODEL: ENDURA HIGHBRITE PLUS 50W LED HIGHBAY /PHILIPS MAKE or any other reputed make of approved quality including supply and fixing of LED with connection etc. as required.
8
-
8279
TELEPHONE & LAN WIRRING
1
-
-
Supplying and drawing CAT6 LAN WIRE protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required
3355
-
51
Supply & drawing of the 4 pair,0.5 sqmm telephone cables in existing surface/ recessed conduit etc. as required.
1899
-
35
Supplying and telephone socket socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required
66
-
108
Supply, Delivery, Installation & Testing of Information Outlet with SMB I/O boards containing a clip-in-type modular Data socket with top fixed on metallic concealed box including connections and making good the damages caused complete as per direction of Engr.-in-charge.
220
-
165
Supplying & Commissioning of Telephone Hand Set.
56
-
448
Supplying & installation of 100 pair KRONE make moudles with locking & key arrangements fabricated with MS sheet & powder coated to be fixed on concealed manner incl. good the damages.
12
-
2500
260 Lines EPABX expandable upto 256 Lines
300
-
1890
4 Core cabling PVC pipe in concealed manner
2955
-
66
FCBC 25A 48 Volts
5
-
32000
Constant Voltage Transformer
5
-
9500
Batteries 12V 60 Ah
16
-
8500
Lightening Protectors
5
-
2500
SITCC
5
-
19500
LAN
1
-
-
Supplying and Commissioning of 6U Rack with all accessories.
55
-
10800
Supplying & Commissioning of Managed Cat 6 24 Port Switch.
125
-
6500
Supplying & Commissioning Cat 6 24 Port Patch Panel.
125
-
3500
Supplying and fixing:
1
-
-
Patch Chord CAT 6 One meter long.
255
-
200
Patch Chord CAT 6 Two meter long.
255
-
200
BDBS,DB,AC DB,FLOOR PANELS,MCBS
1
-
-
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Legrand/L&T/Siemens make, or any other equivallent A catagories reputed make ISI marked as approved
1
-
-
4way, Double Door TPN DB(FOR LIGHT,POWER,UPS AC INDOOR,3-PH)
15
-
2159
12 way SPN DB (Double door)(ALL LIGHT WITH CORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD )
15
-
1897
4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION DATA CENTER/AC ODU as outdoor type))
18
-
1624
8 way TPN DB (Double door)UPS/LIGHT/RAW POWER
15
-
2694
Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB of Legrand/L&T/Siemens make or any other equivallent A catagories reputed make ISI marked as approved in the existing MCB DB complete with connections.
12
-
332
Supplying and fixing 20 amp rating, 415volts, C series, FOUR poles MCB of Legrand/L&T/Siemens make or any other equivallent A catagories reputed make ISI marked as approved in the existing MCB DB complete with connections.
12
-
1100
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Legrand/L&T/Siemens make or any other equivallent A catagories reputed make ISI marked as approved in the existing MCB DB complete with connections.
1800
-
131
Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA Legrand/L&T/Siemens make or any other reputad equevallent A catagories make ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required.
15
-
2239
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Legrand/L&T/Siemens make or any other reputad equevallent A catagories make ISI marked as approved in the existing MCB DB complete with connections.
12
-
1685
Supplying and fixing 40Amps DP 240 volts, RCCB,300mA Legrand/L&T/Siemens make or any other reputad equevallent A catagories make ISI marked as approved in the existing MCB DB complete with connections.
8
-
1922
Supplying and fixing 63Amps DP 240 volts, RCCB,300mA Legrand/L&T/Siemens make or any other reputad equevallent A catagories make ISI marked as approved in the existing MCB DB complete with connections.
12
-
2217
Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Legrand/L&T/Siemens make or any other reputad equevallent A catagories make ISI marked as approved in the existing MCB DB complete with connections.(for power BDB & AC ODU)
15
-
2635
(Earthing) INSTALLATION
1
-
-
S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required.
10
-
11078
S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.
12
-
2462
Excavation of all kinds of soil up to 3 meters depth incluiding refilling (Except rocky soil )
8
-
200
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.
688
-
94
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required.
255
-
1093
Refilling/Back filling soft soil with borrowed within a lead of 5 K.M. etc. as required.
6
-
111
Excavation of hard-rock up to 3 meters depth including getting out the excavated soil disposal of the excavated soil as directed with lead of 50 meters.
6
-
200
Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required.
4
-
2500
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
1
-
-
3.5core x 300 sq mm ( TO MAIN PANEL TRIPPLE /FOUR RUN/DG SET TO MAIN PANEL TRIPPLE RUN, )
300
-
1347.28
3.5core x 185 sq mm com. P. AC,UPS)
300
-
878.66
3.5core x 150 sq mm(MAIN PANEL BUS DUCT)
121
-
702.93
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
1
-
-
3.5core x 95 sq mm ( POWER PANEL )
155
-
475.31
3.5core x 70 sq mm ( FOR POWER PANEL)
121
-
381.59
4core x 16 sq mm (MDB TO FDBL/FDBU SUB,BDB PANEL 02 runs)
121
-
145.61
4 core x 4 sq mm (for small power/LIGHT TO POLE)
500
-
87.87
3.5core x 35 sq mm (To BDB P)
121
-
218.41
LAYING OF CABLE
1
-
-
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
260
-
126
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
300
-
141
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 120 SQ. MM but not exceeding 400 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
250
-
155
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
180
-
41
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
160
-
55
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge.
300
-
33
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
132
-
44
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
55
-
78
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
51
-
124
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 400 SQ. MM From 120 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
51
-
127
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
1
-
-
3.5 core x300 sq mm
30
-
817
3.5 core x185 sq mm
18
-
575
3.5 core x150 sq mm
12
-
514
4 core x16sq mm
12
-
191
3.5 core x35 sq mm
12
-
320
3.5 core x70 sq mm
12
-
386
3.5 core x95 sq mm
12
-
393
Providing,fixing and laying of fallowing dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
1
-
-
50 mm dia
100
-
408
80 mm dia
121
-
472
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
1
-
-
200 mm dia
588
-
829
PANELS & CABLES
1
-
-
FLOOR LIGHT PANEL (GF-5F)01 NOS IN EACH FLOOR LIGHT/ESSANTIAL POWER AND LIFT PANEL 02 NOS
1
-
-
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. Incommer- 01 number of 40A 4P MCB. (make- L&T/LEGRAND or equivalent reputed make ISI marked)(Icu=100 In)(.with axulary for BMS Busbar- 04 numbers of 60Amps Electrolytic copper busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. Out going- (i) 20A 4P MCB 01 NOS FOR POWER BDB/LIGHT BDB(Legrand make)
Out going- (ii) 04 nos 25A DP MCB SPARE.
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-60Amps Ameter with selecter switch & CTS.(DIGITAL)
(iii) 01 set of 0-500 voltmeter with selecter switch.(DIGITAL)
5
-
28304
FLOOR POWER PANEL (GF-5F)01 NO IN EACH FLOOR ,FOR WATER SUPPLY 02 NOS
1
-
-
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. In commer- 01 number of 125 Amps 4P MCCB. (make- L&T/LEGRAND or equivalent reputed make ISI marked)(Icu=0.8 In)with shunt trip.with axulary for BMS
5
-
64863
Busbar- 04 numbers of 150Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator. Out going- (i) 40A 4P MCB 02 NOS FOR POWER BDB (Legrand make)
Out going- (ii) 04 nos 32A 4P MCB POWER SPN BDB Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-100Amps Ameter with selecter switch & CTS.(DIGITAL)
(iii) 01 set of 0-500 voltmeter with selecter switch.(DIGITAL)
1
-
-
FLOOR UPS PANEL MINOR AREA LIGHT
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. In commer- 01 number of 32 Amps 4P MCB. (make- L&T/LEGRAND or equivalent reputed make ISI marked)
Busbar- 04 numbers of 40Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
5
-
25514
Out going- (i) 25A 2P MCB 04 NOS FOR LIGHT BDB(Legrand make)
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-30Amps Ameter with selecter switch & CTS.(DIGITAL)
(iii) 01 set of 0-500 voltmeter with selecter switch.(DIGITAL)
1
-
-
FLOOR UPS PANEL FOR DATA CENTER OF ALL 60 KVA UPS
1
-
-
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD)
In commer- 03 numbers of 125 Amps 4P MCCB. (make- L&T/LEGRAND or equivalent reputed make ISI marked)(Icu=100% Isc) with shunt trip & axulary for BMS & mechnical inter locking for one incommer source to other.
3
-
122918
Buscoupler- 02 numbers of 125 Amps 4P MCCB. (make- L&T/LEGRAND or equivalent reputed make ISI marked)(Icu=100% Isc) with shunt trip & axulary for BMS & mechnical inter locking for one incommer source to other.
Busbar- 04 numbers of 150Amps Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator.
1
-
-
Out going- 04 nos 40A 4P MCB UPS RAW POWER
Out going- 08 nos 32A DP MCB to Each rack power.
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-100Amps Ameter with selecter switch & CTS.(DIGITAL)
(iii) 01 set of 0-500 voltmeter with selecter switch.(DIGITAL)
NB- This panel should have proper earth by suitable rated copper flat.
1
-
-
MAIN UPS PANEL (80-100) KVA 2 NOS ON LINE UPS 3PH-3PH)AT GF control room
1
-
-
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR COMMON)
1
-
223357
In commer-01- 03 number of 200A,ICU=0.8 In 4P TYPE,MCCB (make- L&T,Equvalant reputed make ISI marked) .With axulary for BMS.(From 100 KVA UPS)
Buscoupler- 02 numbers of 200 Amps 4P MCCB. (make- L&T/LEGRAND or equivalent reputed make ISI marked)(Icu=100% Isc) with shunt trip & axulary for BMS & mechnical inter locking for one incommer source to other.
Busbar-1- 04 numbers of 02 SETS 300Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator
1
-
-
Out going-1- (i) 04 numbers of 125A 4P MCCB(DSINE) (make- L&T or equivalent reputed make ISI marked)(Each data rack) with bus bar system.
Out going-2- (i) 08 nos 32A TPN MCB for normal light .
Instrument- (i) 09 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 03 set of 0-200Amps Ameter with selecter switch & CTS.DIGITAL
(iii) 03 set of 0-500 voltmeter with selecter switch.DIGITAL
iv) 04 nos 40kA SP VSD with 32A SP MCB.
NB- This panel should have proper earth by suitable rated copper flat.
1
-
-
MAIN AC PANEL FOR OUTDOOR UNIT OF SLDC
1
-
-
S/I/T&Commissioning of LT OUTDOOR mounted on roof top area with IP-65 PROTECTION floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. In commer- 01 number of 800A 3P MCCB with under voltage,over voltage ,current,earth fault protection (make- L&T,Equivalant reputed make ISI marked) Busbar- 04 numbers of 900Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
1
-
373736
Out going- (i) 63A 4P RCCB,100MA 18 NOS FOR OUT DOOR UNIT UPTO 30 KW(Legrand make)
Out going- (i) 32A 4P RCCB,100mA 14 NOS FOR OUT DOOR UNIT UPTO 15 KW (Legrand make)
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication
(iii) 04 nos of 65kA SP VSD WITH 32A SP MCB
1
-
-
MAIN CONTROL PANEL AT GF WITH BUSCOUPLING SYSTEM
1
-
-
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR 02 NOS OF 500 KVA TRANSFORMER)In commer(500 KVA NORMAL SUPPLY)-1- 01 number of 4p 800A EDO TYPE ACB(SR 18G) with under voltage,over voltage ,current,earth fault protection & Electrical locking for normal & DG (make- L&T/ABB/LEGRAND,Equivalent reputed make ISI marked) (WITH AXULARY FOR BMS)
In commer(500KVA NORMAL SUPPLY)-2- 01 number of 800A 4p EDO TYPE ACB(630A SATING)(SR 18G) with under voltage,over voltage ,current,earth fault protection & Electrical locking for normal & DG(make- L&T,/ABB/LEGRANDEquvalant reputed make ISI marked) (WITH AXULARY FOR BMS)
1
-
2250932
DG IN commer(320 KVA DG SUPPLY)-1- 01 number of 800A EDO TYPE 4p ACB(630A SATING)(SR 18G) with under voltage,over voltage ,current,earth fault protection & Electrical locking for normal & DG (make- L&T/ABB/LEGRAND,Equvalant reputed make ISI marked) (WITH AXULARY FOR BMS)
1
-
-
DG IN commer(320 KVA DG SUPPLY)-2- 01 number of 800A EDO TYPE 4p ACB (630A SATING)(SR 18G) with under voltage,over voltage ,current,earth fault protection & Electrical locking for normal & DG (make- L&T/ABB/LEGRAND,Equvalant reputed make ISI marked) (WITH AXULARY FOR BMS)
BUSCOUPLER-1(NORMAL 1&2 TO DG-1 & DG2)-1- 01 number of 1000A EDO TYPE ACB 4p(SR 18G) with under voltage,over voltage ,current,earth fault protection & Electrical locking for normal & DG (make- L&T/ABB/LEGRAND,Equvalant reputed make ISI marked) (WITH AXULARY FOR BMS)
BUSCOUPLER-2(SOURCE-1,2 TO UPS)-2- 01 number of 400A MP based 4P MCCB with under voltage,over voltage ,current,earth fault protection & Electrical locking for normal & UPS(make- L&T/ABB/LEGRAND,Equvalant reputed make ISI marked) (WITH AXULARY FOR BMS)
1
-
-
Busbar-1&2 04 numbers of 1000Amps Electrolytic copper busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing) Busbar-3&4 04 numbers of 1000Amps Electrolytic copper busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing) Out going- (i) 01 numbers of 400A 4P MCCB (make- L&T or equivalent reputed make ISI marked)(UPS INCOMMER & EQUIPEMENT PANEL)
1
-
-
Out going- (i) 04 numbers of 63A 4P MCB (make- L&T or equivalent reputed make ISI marked)(timer panel & water supply management)
out going- 01 number of 800A TP MCCB WITH ROM & S. LINK(make- L&T,Equvalant reputed make ISI marked) AC PANEL INCOMMER
Out going- 02 numbers of 250A 4P MCCB (make- L&T or equivalent reputed make ISI marked)(FIRE PANEL & SPARE)
Out going- 02 numbers of 630A 4P MCCB (make- L&T or equivalent reputed make ISI marked)(500 KVAR APFC PANEL 01 NO & 01 NO of PRESSION ac main incommer)
1
-
-
Out going- 8 numbers of 125A 4P MCCB (make- L&T or equivalent reputed make ISI marked)(LIFT,WATER,FLOOR POWER & 50 KVA UPS)
Out going- 02 numbers of 200A 4P MCCB (make- L&T or equivalent reputed make ISI marked)(02 NOS 100 KVA UPS)
Out going- 15 numbers of 32A 4P MCB (make- L&T or equivalent reputed make ISI marked)(FDB LIGHT EACH FLOOR & AREA LIGHTING)
1
-
-
Out going- 01 number of 250A 3P MCCB (make- L&T or equivalent reputed make ISI marked)(FOR SOLAR )
Instrument- (i) 36 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 12 sets of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication
(iii) 16 nos of 65kA SP VSD WITH 32A SP MCB
1
-
-
350 KVAR APFC PANEL =01 NOS
1
-
-
Supply ,installation ,testing & commissioning of 350KVAR APFC PANEL with contactor based switch ,main incommer MCCB,WITH LTXL ULTRA HEAVY DYTY power capacitor with 7% harmonic filter with copper reactor (stage-25+25+25+25+50+50+50+20+20+20+40(f)) of L&T/ABB /Siemens make) with all required accessories to complete the job including all connection.
1
-
633500
PRESSION AC CONTROL PANEL(1F)
1
-
-
S/I/T&Commissioning of LT INDOOR mounted on Floor panel room with IP-55 PROTECTION floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. In commer- 01 number of 630A 3P MCCB with under voltage,over voltage ,current,earth fault protection (make- L&T,Equivalant reputed make ISI marked)
Busbar- 04 numbers of 700Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
1
-
283747
Out going- (i) 6 Nos of 125A 4P MCCB (25KA) (60-80%) (Legrand/L&T make)
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication
(iii) 04 nos of 40kA SP VSD WITH 32A SP MCB
1
-
-
D.G. SET: WITH WIRRING (320 KVA) 2 NOS
1
-
-
Supplying, Installation, Testing & Commissioning of Diesel Generating set (Alternator directly couple to Diesel Engine Salient type) compelete inspection by concerned electrical inspector with proper testing certificate complete in all respect broadly comprising of following and as per specification enclosed. (kirloskar/jackson/sterling make)
ALTERNATOR:320 KVA Self excited, Brush less type, 3 Phase, 415 Volts 50 Hz, 4 Pole, AC Alternator complete with all accessories.
2
-
3488391
ENGINE: Water Cooled Diesel Engine with rated capacity of 750 BHP at 1500 RPM; Turbo charged, direct injection type, 4 Stroke, 6 Cylinder including Fuel Tank of min. 300 liters capacity fabricated with 3 mm thick MS Sheet duly calibrated and painted with One coat of Primer & two coats of synthetic enameled paint of approved colour, residential type silencer with exhaust pipe 150 mm dia MS Pipe duly wrapped with asbestos rope of legging of specified qualtiy & specification.
1
-
-
AMF PANEL: Cubical, Compartmentalized, AMF Panel Baord with all Power & Control Contractors, Switches, Meters and other accessories, Internal Wiring, connection, inter-connection etc. for Trouble Free smooth function for 320 KVA DG Set complete with Battery Charger & leads as required. BASE PLATE: Common Base Plate of required size for mounting of Engine Alternator Set fabricated from MS Channerl and vibration damping arrangement with cushy foor mounting including paintng etc. as required. FOUNDATION: Suitable size Cement Concrete (1:2:4) foundation duly plastered and finished with neat coat Cement as required.
1
-
-
13 PASSENGER LIFT WITH WIRRING
1
-
-
Design Supply, Installation, Testing & Commissioning and putting into operation with compelete inspection by concerned electrical inspector, Director Factory and Boilers, Odisha with proper testing certificate and final testing of Automatic Lift compelte with all standard equipments accessories and control equipments as per Manufacturer's Design and as per CPWD /OPWD specification (Part - III Lifts) 1981 with valid lisence for installation and fulfilling following requirements on turnkey basis.
1
-
-
Type: PASSENGER LIFT
1
-
-
Load: 13 PASSENGER(884 KG)
Speed: 1.0-1.25 Meter Per Second.
Control: Variable voltage with variable frequency
Operation: Microsprocessor based simplex collective selective with / without Lift Attendant.
Total Rise: About 21 Meters.
Landings: For All on same side. Floors Served: G, 1,2,3,4,5,TERRACE
Signals: Digital Car Position Indicator, Car Travel direction Indicator in Car & at all Landings.
Lift Shaft Size: About 2600 mm Width X 1900 mm Depth, finished with Plaster.
Lift Car Size: About 2000 mm Width X 1100 mm Depth. Car Entrance: Clear Opening 900 mm Wide X 2000 mm high Protected with Car Door.
1
-
-
Landing Entrance: Clear Opening 900 mm Wide X 2000 mm high Protected with Landing Door.
Car Door: Stainless with front glass to transparent Two Panel Center opening flush type.outer visible. Landing Door: Mild Steel Two Panel Center opening flush type P. Door Operation: Automatic Electric Power operated Door with in infrared protection
Car Interior: Stainless Steel Panel with Hair line finish on all sides.
Car Floor: Hard Wood covered with PVC / Marblex Tiles..
1
-
-
Car Ceiling & Lighting: Fluorescent Lighting Concealed by suspended false ceiling with plain acrylic diffiuser. The frame of suspended false ceiling shall be of powder coated Aluminum. Car Ventilation: Pressure Fan with anodized Aluminum Grill.
Emergencing Lighting in Car: Battery operated Emergencing Lighting in the Lift Car. Intercom System: Battery operated intercom system in Lift Car, Machine Room and Control Room.
Emergencing Alarm: Battery operated Alarm Bell System in Lift Car and Control Room.
Position of Machine Room: Directly above the Lift Shaft.
Electric Power Supply: AC 415 Volt 3 Phase 50 Hz terminated in Machine Room
1
-
-
OTHER SPECIAL PROVISIONS
• VVVF CONTROLLER
• AUTOMATICE RESCUE DEVICE (ARD)
• EMERGENCY LIGHT AND BATARY OPERATED ALARAM BELL
• DOT MATRICKX SEVEN SIGMENT DIGITAL POSITION INDICATORS
• FIRE RATED DOOR FOR 2 HOUR
• 3 WAY INTER COM/PRESS AND SPEAK BUTTON WITH HAND SET
• FLOOR ANNUNCIATOR WITH MUSIC
• INFRA RED SCREEN
• OVER LOAD WARNING INDICATOR
• BRAILLE BUTTONS
• FREE SERVICE FOR 2 YEARS
• PIT LADER
• FULL CAR HEIGH CAR FIXTURE ARRIVAL CHIME
• PROVISION FOR CC CEMARA WITH INSTRUEMENT
1
-
-
Fire Man Switch: Fire Man Switch at Main Landing Terminal.
2
-
2034524
CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWER
1
-
-
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 200mm(W), of Legrand - Cablofil make or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required.
120
-
595
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 300mm(W), of Legrand - Cablofil make or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required.
120
-
788
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 400mm(W), of Legrand - Cablofil make or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required.
125
-
890
FLOOR RACE WAY SYSTEM
1
-
-
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , FLOOR RACE WAY WITH JUNCTION with internal dimensions of size 54mm(H) x 200mm(W), of Legrand - Cablofil make or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required.
200
-
1098
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , FLOOR RACE WAY WITH JUNCTION with internal dimensions of size 54mm(H) x 300mm(W), of Legrand - Cablofil make or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories, bend, cover, supporter) WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required.
255
-
1255
RISING MAIN (Sandwitch Type) Aluminium RM
1
-
-
Supply, installation, testing and commissioning of following rating rising mains 3P 4W with 100% Neutral + enclosure as Integral Earth in sandwitch construction of Aluminium bus bars TTA in accordance to IEC61439 Part 1 and 6,Temperature rise design as per Latest IEC 61439 Part 1 and 6, Mechanical strength certification upto IK10,Salt Spray Test upto 1500 hrs, with tap off connection point provision in each floor fabricated out of CRCA sheet steel/GI 1.5mm Entire Aluminium Alloy treated with 5 Galvanic Process (Copper Plating + Tin Plating) Insulation is Class F - 155 deg C,Insulation type is Multi-Layer Polyester Film,Operating voltage upto 1000V, Impulse Voltage - 12kV,Power Frequency Withstand Voltage 3.5KV including 2 Nos. of 25 x 6 mm Aluminium earthing conductor through out the length of the rising mains. Also provide Flange End Provision With Copper Braided Flexibles For Termination at Endfeed Unit,Brackets,Spring Hangers & End cover to close the end of rising main, and to required MS Support provided for extra end supports to the bus bars.
1
-
-
1000A 3 Phase 4 Wire 100% Neutral Aluminium Conductors Sandwich Type Rising Mains IP55 with breaking capacity of 36kA for 1 sec-POWER/LIGHT
33
-
16500
400A 3 Phase 4 Wire 100% Neutral Aluminium Conductors Sandwich Type Rising Mains IP55 with breaking capacity of 36kA for 1 sec-LIGHT/OWER
33
-
10500
200A 3 Phase 4 Wire 100% Neutral Aluminium Conductors Sandwich Type Rising Mains IP55 with breaking capacity of 36kA for 1 sec-LIGHT/OWER
33
-
8700
Supply, assembling, installation in correct assigned position, making proper connections, testing and commissioning of following rating floor mounted Adopter Boxes Including MCCB fabricated out of 14 / 16 gauge CRCA sheet steel in cubical formation, dust and vermin proof, coupled with rising mains. Boxes shall be treated with all anticorrosive process before powder coating as per specifications. 2 No. earthing terminals shall be provided. Boxes shall be suitable for connecting of rising mains at top and aluminium cables at bottom.
1
-
-
800A End Feed Unit Box with 800A 4P 50kA MCCB'
5
-
45900
400A End Feed Unit Box with 800A 4P 50kA ACB'
5
-
25600
Supply, installation, testing and commissioning of tap off boxes made up of 14 / 16 gauge CRCA sheet steel mounted on the rising mains including providing of following MCCB’s as required with all accessories and adequate space shall be provided for cable terminations.Safety Feature of Energy Isolation of MCCB on PIB Door Opening
1
-
-
125 A Tap-off Box with 100A 4P 36kA MCCB's
12
-
10800
250A Tap-off Box with 200A 4P 36kA MCCB's
10
-
15600
100A Tap-off Box with 63A 4P 25kA MCCB's
10
-
7600
EXTERNAL ELECTRIFICATION
1
-
-
Supplying, Erection, Fixing, connection & testing of LED Street Light of HAVELLS MODEL: ENDURAPEARLPLUSSL60WLED757PASYTOPC /PHILIPS /WIPRO MAKE or equvalant reputed make ISI marked as approved make with specification LED Luminarie 120 Watt with 9 meter Velmond make maintenance freeG.I POLE with braket including MCB box for inspection as required.
25
-
31443
Supplying, Erection, Fixing, connection & testing of LED BOUNDRY WALL Light of HAVELLS MODEL: ENDURAPEARLSL35WLED757SASYTOPC/WIPRO or equvalant reputed make ISI marked as approved make with specification LED Luminarie 35 Watt with BRAKET MOVEABLE TYPE maintenance free for inspection as required.
30
-
3102
Supplying, Erection, Fixing, connection & testing of 45 LED GATE Light of WIPRO make or equvalant of Philips/LT/PANASONIC or equievalant reputed make A catagory ISI marked as approved maintenance free having 2 years warranty G.I P ipe with braket including MCB box & including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.
4
-
12726
Supplying, Erection, Fixing, connection & testing of 120 W LED special type Flood Light of die cast alluminium housing with frame & toughened glass ,IP 66 protection videWipro or equvalant reputed make of Philips/LT/WIPRO Panasonic/philips/wipro or equievalant reputed make & model A catogory, ISI marked as approved having 2 years warranty as approved make G.I cover box including MCB box & including Auto On off provision with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.
4
-
15297
Supplying, Erection, Fixing, connection & testing of Panasonic 40 LED GATE Light of PPTM02408 of Panasonic make or equvalant of Philips/LT/WIPRO or equievalant reputed make A catagory ISI marked as approved maintenance free having 2 years warranty G.I P ipe with braket including MCB box & including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.
2
-
10372
Supplying ,installation & fixing of 11W, High efficient LED with extruded Aluminium housing with PC diffuser.CRI70, IP65, CCT - 6500K, Ambient temp-0 to 45DegC, Driver efficiency80%,THD25%, Powerfactor0.9, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level60V DC as per IEC standard. Luminaire lumen ≥ 565 lumens (51 lm/W). Similar to Wipro Make LB12-131-XXX-65-05 or equivalent Philips/ LT/Trilux make. including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.
12
-
6458
S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.
10
-
2162
Excavation of all kinds of soil up to 3 meters depth incluiding refilling (Except rocky soil )
6
-
200
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.
312
-
94
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required.
55
-
1093
Refilling/Back filling soft soil with borrowed within a lead of 5 K.M. etc. as required.
11
-
200
CABLING
1
-
-
Supplying and laying of one number PVC insulated armoured and PVC sheathed XLPE AL. conductor power cable of 1.1 KV grade POLYCAB/FINOLEX/HAVELLS or equievalant reputed ISI MARKED MAKE of following size cables as per direction of Engg.-in-Charge.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
1
-
-
4core x 10 sq mm (OFP TO IND. TIMER PANEL)
200
-
133.89
3.5core x 35 sq mm
121
-
218.41
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
200
-
126
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
121
-
124
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.
1
-
-
3.5 core x35sq mm
8
-
250
Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials.
212
-
104
Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling.
1
-
-
50 mm dia
18
-
408
PANELS
1
-
-
S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type MCB ENCLOSURE made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR UPS) with 20A TPN MCB 01 NO.
4
-
2044
AREA LIGHT,TIMER PANEL FOR STREET LIGHT
1
-
-
S/I/T&Commissioning of LT OUTdoor WALL/FLOOR mounted double door type cubical type electrical main panel ( light ) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing.
In commer- 01 number of 32A 4P MCB. (make- LEGRAND or equivalent reputed make ISI marked)
Busbar- 04 numbers of 40Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator. Out going- (i) 01 number TIME SWITCH,01 NO OF 32A TP POWER CONTACTOR FALLOWED BY, 6-32A SP MCB-15 NOS((make- Legrand or equivalent reputed make ISI marked)(FOR OUT LIGHT CIRCUIT)
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-30Amps Ameter with selecter switch & CTS.
(iii) 01 set of 0-500 voltmeter with selecter switch.
1
-
23964
(LIGHTENING CONDUCTOR)
1
-
-
AIR TERMINAL & ACCESSORRIES LIGHTNING ARRESTER+ MAST: Supply and Fixing of GI Mast (3//5 mtrs height) for mounting the terminal & adaptor with the Stormaster ESE air terminal along with supporting stay wires, etc .Make : ABB/Precision Power PTY Ltd(MODEL OPR 60+MAST 3M,ABB MAKE)
1
-
255800
Supply of 70 sq.mm pvc insulated flexible single core copper down conductor along with the fixing accessories for ESE lightning arrestor. Make : Polycab/Finolex/RR Cable
100
-
850
Lightning Strike recorder (LSR): LSR should me non electronic and non-resettable type having 06 digits Display and enclosed in an IP 67 enclosure with the minimum sensitivity of 1000 A & maximum capacity of 220 KA tested on 8/20 microsec wave form as per IEC 60-1:1989. It should be non electronic type and does not required external powersupply for the working. Model: LS COUNTER ( Optional) Make : ABB OR EQUIEVALANT
1
-
55800
(i)Code No. MES – 80 (3. Mtrs) Maintenance free Safe Earthing Electrodes with ISI G.I. pipe dia 75mm as Secondary electrode with wall thickness of 2.6 mm and the Primary Earthing Electrode will be 50mm X 6mm X 1no M.S. hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the Primary Earthing and the secondary Earthing, the Surface Area in will be 7,06,500sqmm for 3mtrs length and Cross Sectional Primary conducting area is 300 sq.mm. An Solid G.I. Base plat seals the unit at the bottom. (MES-GFC ground Filling compound will be provided in 25 kgs Bags.)(MES-GFC ground Filling compound will be provided in 25 kgs Bags.)(2 bags required for each earthing electrode.)
2
-
13966
SOLAR PV WITH ON GRID POWER
1
-
-
Supply Installation Testing and Commissioning of on grid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono / Poly Crystalline silicon solar cells, net metering facility ,necessary protections, earthing, mounted on Aluminium / GI structure of suitable strength with following components a complete aas arequired: a) Solar Photovoltaic Module of capacity 330Wp or above, manufactured in India, conforming to IS14286 / IEC61215, IS/IEC61730-Part-1,IS/IEC61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants /systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase , 4 wire, 50Hz +/- 2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree Celcious. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage,frequency. c) Data Monitoring System complete with accessories.d)Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugsand other accessories etc. asarequired.e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/ conduit lugs and other accessories etc. asrequired. with all required accessories as required as per the direction of Engg-in-charge.Make-Kamal Solar/ EMMVEE/ Venus / Anchor/panasonic or equievalant reputed make & model A catogory, ISI marked as approved . The entire SOLAR system should be Replacement Warranty will be 5 years
35
-
64800
Sub Station
1
-
-
Supplying & installation of 100x116 mm RS Joist, 9 mtr long x 2 nosx23 Kg=414 Kg
755
-
130
Supplying & installation of Pressure Channel 100 x 50 x 6mm MS channel each 2.8 mtr. Long( 9.2 K.g. per mtr.)x2 Nos
288
-
130
Supplying & installation of S/S 2 Pole bressing chhanel 75 x 40 x 6mm MS channel each 2.8 mtr. Long( 6.8 K.g. per mtr.)x2 Nos
268
-
130
Supplying & installation of AB Swith & HG Fuse, Mounting Channel 75x40x6 -2.8 mtr.long, 4 nos.(6.8K.g. per mtr.)
135
-
130
Supplying & installation of Cantilever chhanel for supporting AB Switch arm, 75x40x6-1 mtr. Long, 2 nos.(6.8 K.g. per mtr.)
139.5
-
130
Contilever chhanel for supporting HG Fuse 50 x 50 x 6 mm MS Angel (1.0 mtrs. Long 2 nos.)4.5K.g. per mtr.
188
-
130
Supplying & installation of Angle for Cantilever arrrangement for AB Switch & HG Fuse 50 x 50 x 6 -2 mtr .each 2 nos.(4.5 K.g. per mtr.)
255
-
130
Supplying & installation of S/S 2P bressing Angle 50 x 50 x 6 mm - 2.8 mtr. Long 2 nos.(4.5 K.g. per mtr.) with side angel ( Total 9 mtr.)
298
-
130
Supplying & installation of Angle for mounting LT distribution Box 50 x 50 x 6 mm MS Angel -2.5 mtrs.each Long 2 nos.( 4.5 K.g. per mtr.)
358
-
130
Supplying & installation of 11KV AB Switch 3 Pole (1000 Amp.)
2
-
24834.87
Supplying & installation of 11KV HG Fuse 3 Pole (800Amp.)
2
-
17000
Supplying & installation of11 KV L.A. 12KV-10KA
6
-
3977
Supplying & installation of+B7 H.T.stay set ( Complete )
8
-
2365
Supplying & installation of H.T. Stay Insulator
8
-
370
Supplying & installation of H.T. Stay clamp (1.95 K.g./ Pair )
8
-
281
Supplying & installation of 7/10 SWG Stay Wire
123
-
130
Supplying & installation of of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.
20
-
5765
Supplying & installation of 25X5 MM G.I STRIP
133
-
140
Supplying & installation of 40x6mm GI Flat for nutral
78
-
140
Fixing of stay set with 0.5Cum cement concret foundation 1:3:6 size ( 900mmx600mmx900mm) using 40mm BHG metal with all labour and material except stay set , stay wire , stay insulator .
12
-
3696
Concreting of support C.C - 1:4:8 using 40mm BHG metal size - 5'x2'x2' = 20CFT = 0.570Cum
Padding 900x600x150mm = 0.081 0.651Cum @ 3071.25= 1999.38 each
15
-
3728
Couping of support section 15''x15'' ( 3.9Cft) height 2'-6' ( 1' - 6'' above G.L & 1' - 0' below G.L ) in C.C 1:2:4 using 12mm BHG metal & curing for 5 days
15
-
961
Supplying & installation of Materials for Machinery work for Earth Pit,Charcoal, Salt etc including construction of earthing chamber (Size: 2"x2") and RCC slab cover
25
-
2939
Supplying and Laying of HT cable on existing pole
1
-
-
3cx240 sq. mm XLPE cable.,11kv ,2 runs For 500KVA
120
-
2939
Supplying and making out door end termination with cast resin compound aluminium lugs and other jointing materials for 3cx240 sq.mm size of PVC insulated armoured and PVC sheathed aluminium conductor cable of 1.1 KV grade as required.
8
-
30304
Supplying & installation of 50x6mm copper Z clamp for TFR LT 4nos x0.8kg each for connection of LT cable
125
-
1478
Supplying & installation of Red Oxide paint
50
-
192
All. Paint for painting of pole & transformer.
50
-
192
Black Paint for painting of angle & channel.
50
-
192
Supplying & installation ,fixing of Ms Nut , Bolt & Washer
285
-
130
Supply, erection , testing and commissioning of 500KVA 11000V / 433V, 3 phase 50 Hz, copper winding Delta-Star, Dyn11, Step-down, Cast Resin- Oil cooled type Transformer with On load tap changer from +10% to -15% in steps of 1.56%. with compelete inspection by concerned electrical inspector with proper testing certificate Cable termination box on HT and LT side. 1 no. CT ,class PS duly fitted and connected shall be provided for the neutral. Neutral shall be solidly earthed. The indications for the bucholz's relay, oil temperature, winding temperature, alarm to be indicated in the Main LT panel respectively. The transfromer shall be suitable for connecting sandwich type busduct from Main LT panel.
2
-
733900
Supplying & installation of 100x116mm RS Joist 4mtr longx23kg for resting of LT cable
255
-
130
Construction of Plinth for TFR 6ft hight (below GL4ft)x10ftx0ft
1
-
46565
Barbed Fencing (size 15'x15' )with constn. of retaining wall ,erection of RCC fencing post, Sand filling and metal spreading, Fixing of Iron gril gate etc as per CESU specification
6
-
56174
Providing and fixing 25mm x 5 mm G.I strip on surface or in recess for connections etc. as required.
121
-
140
Sundries for survey , PVC tape, Ampire tape,Danger Board, small size nut & Bolt preparation of drawing cable socket etc
2
-
17000
Charges of Electrical distribution department with their leassoning charges ,inspection charges for departmental engineer-in charge with all type of testing whichever required for substation area ,charging of substion with tested ok etc as required to complete the job with supplying and installation of HT/ CT opprated type KWH metering system with 1000/5A CT range as per direction of Engg.-in-charge of concerned electricity supply company having provission for HT Measurement panel if necessary to complete the job as required.
1
-
388500
Security deposit for total maximum demand of office building which is chargeble from concerned elect. Dept (CESU) with all duties and also refundable . (@ Rs 4000.00/Kwt)
500
-
4500
Supervission charges for construction of o 11 KV HT OH line & LT destribution charges ,maintainance charges . (@6% of total sum of estimated cost for SUB STATION DETAIL ESTIMATE)
1
-
-
FP STRUCTURE
1
-
-
Supply, installation & commissioing of 12KV outdoor FP structure and associated equipments with a set of Air break switch,a set of GOS operating handle,a set of lightning arrestors, DOLO fuses,insulators 0 swg cu wires,Alkathene tube and other necessary accessories as per local Electricity Board requirement., cross arms for cable pot head including jumper with support arrangement for cable riser to be included. .The rate shall be inclusive of foundation for poles all as per specification (4 Nos. 9.15 mtr long RSJ pole)
1
-
-
Market Rate
1
-
-
Supply
1
-
300000
Installation
1
-
30000
H.T METERING CUBICLE
1
-
-
Supply Installation, testing and commissioning of Central Electricty supply utility of orissa (CESU) certified outdoor 12KV Tariff Metering panel as per departmental technical specification.
1
-
-
Market Rate
1
-
-
Supply
1
-
234500
Installation
1
-
25000
H.T VCB PANEL
1
-
-
Supply, installation, testing and commissioning of CESU certified H.T Breaker panel- outdoor VCB KIOSK extensible type for future requirement. The Panel shall be made out of 2.5mm cold rolled, mild steel, metal clad, free standing, totally enclosed, cubical type and compartmentalised suitable for operation on 12kV, 3phase, 50Hz, AC earthed system with busbar interconnections, control wiring, designation labels, Caution notices, pad locking facilities wherever required. Necessary space provision for entry of HT cables from the bottom through detachable gland plates.The Panel shall be finished with one coat of Air drying Epoxy primer and two coats of Epoxy paints of shade 631 0f IS:5Siemens Grey paint finish.
1
-
-
Panel consists of :
1
-
-
12 KV 21.8 KA 630 Amps HT OUTDOOR 3 BREAKER VACUUM CIRCUIT BREAKER Switchboard comprising Incomer/Outgoing VCB Feeder Panel each to control 500 KVA Transformer complete as per following Specifications compelete inspection by concerned electrical inspector with proper testing certificate.
1
-
-
Panel comprises of:
1
-
-
a. 1nos. 3P VACCUM CIRCUIT BREAKER (630A), horizontal drawout, horizontally isolated type, 12 kV,26.3kA with Motor operated Spring charged Mechanism, Anti Pumping Device, The rate shall be inclusive of power pack suitable for input voltage 433V 3phase AC, output voltage 24V DC for 2 Close, Open operations, Impulse load of upto 350 W for shunt trip and upto 200W for closing coil,Mechanical Operation Counter, 4 NO + 4 NC Spare Aux. Contact with contact multiplication contactor for customer use, Automatic safety shutter, Mechanical Close/Trip knob, Mechanical ON/OFF Indication, Operating Handle, all standard accessories.The rate shall also be inclusive of bus bar extension, necessary hardware for grouting, minor civil works, testing and commissioning of the complete panel as a whole etc. as required complete for proper installation.
1
-
-
b.Potential Transformer (darwout type), Resin cast fixed type , 100VA, Class:0.2, 12KV/V3/110V/V3 complete with HT and HT HRC Fuses - 3 Nos.
1
-
-
c.Current Transformer resin cast type of 100/1-1Amps. Dual Core ( Core 1 -10VA class 0.5 for Metering, Core 2 – 10VA 5 P 10 for Protection)-for incoming breaker - 3nos
1
-
-
d.Shunt trip coil
1
-
-
e. Meters:
Digital Ammeter with 5 Position Selector Switch
Digital Voltmeter with Built In Selector Switch
Digital Trivector Meter CL0.5
Load Manager Schneider EM 6400 CL0.5 with MD Indication - 1 set
1
-
-
f.Protection: 3P non directional IDMT 3 0/c , 1 e/f relay with highest instantaneuous elements - 1 set
master trip relay (VAJHM-13 or Equivalent) - 1 set
Trip circuit Supervision relay - 1set undervoltage,time delay over voltage relay - 1set
PT Fuse fail relay - 1set
Auxillary relay for transformer protection complete with Alarm Bell/Scheme 10 Window Static Facia Annunciator with Accept/Reset/Test Push button with hooter etc.,- 1set
DC Fail Alarm with 2 set Aux Relays- 1 Set
1
-
-
Auto/Manual selector switch& trip selected switch
1
-
-
g. Breaker on/off/ healthy Trip/Auto trip,spring charged LED type indication lamps also phase indicating lamps (R,Y,B) - 1 set
1
-
-
h. Motor / hand operated mechanism - 1 set
1
-
-
i. 230V AC supply for Spring charging meter
1
-
-
j. MCBs for AC/DC Control, Heater On/Off Switch with Space Heater and Thermostat, Single Phase Switch socket, Cubicle Illumination TL Lamp, Fully covered Test Terminal Block etc - 1set
1
-
-
k. Copper busbar, suitable rating 3 Phase,Air insulated with heat shrinkable sleevs (raychem & required Panel Earthing) - 1set
1
-
-
Market Rate
1
-
-
Supply
1
-
766899
Installation
1
-
35000
CONTROL CABLES (COPPER)
1
-
-
Supply, laying and testing of 1.1KV grade PVC insulated copper cables (YFY) as per specification. The rates quoted shall be for laying in trays, cable trenches (indoor and outdoor), pipes, etc. For buried cables, the are shall include excavation works for outdoor cable laying."
1
-
-
24 Core x 2.5 Sqmm Cable (PVC)
Market rate
90
-
3500
TERMINATION CONTROL CABLES (COPPER)
1
-
-
Supplying and providing the end termination\s with copper lugs for all the above cables with Double compression brass cable glands, taping, crimping, gland and amour earthing, etc. complete as required.
1
-
-
24 Core x 2.5 Sqmm Cable (PVC)
Market Rate
8
-
3500
FENCING
1
-
-
Providing 2500mm high chain link fencing consisting of 50x50x6mm MS angle, vertical support, 2500mm high (space not exceeded 3M), 50x50x6mm MS angle 2800mm long bracing struts (in both directions) for every fifth post (andat change of directions of fence) and 8 guage chain link mesh 50x50mm fully streached and secured at MS angle verticals and horizontals with 6mm dia MS bolts, nuts and washers spaced at 150mm (min) using 25x5mm MS flat cover strips, 170mm long, bottom 75mm end of MS verticals and bracing struts to be split and 40mm embedded in 400x400x500 deep cement cencrete 1:3:6 including necessary welding and / or bolted connections of MS horizontals and bracing / struts to vertical posts excavation, cement concrete and painting one coat of primer and two coats of synthetic enamel paint to all exposed faces of steel work and chain link fencing, measurd nett area of fencing between external.
Market Rate
1
-
-
Supply
25
-
6500
Installation
25
-
600
Supply and Installation of Gate for Substation along with Fencing,
1
-
-
Frame size - 2.5M x 1.8M
1
-
-
MS Angle - 50 x 6mm
1
-
-
Chain Link - 8SWG GI
1
-
-
Paint - 2coats of Red oxide & 2coats of enamel paint.
1
-
-
Market Rate
1
-
-
Supply
1
-
15000
Installation
1
-
2000
CIVIL WORKS
1
-
-
Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.
15
-
200
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.
15
-
5677
Fire Fighting System
1
-
-
LIGHT SYSTEM
1
-
-
Supply, installation, testing and commissioning of electrically driven high pressure centrifugal fire hydrant / sprinkler pump, suitable for automatic operation consisting of the following:
1
-
-
a) Horizontal, split casing, centrifugal pump, suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ AC supply. The installation shall be complete with flexible coupling and coupling guard (as per safety norms enclosed), as required. Fire pump shall have CI casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and SS (304) Shaft with mechanical seal, capable for delivering 2280 LPM at outlet head of 88 mts to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost hydrant / sprinkler. The installation shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side. (The pump should be tested for bench mark at factory and shall be gotten approved by the Local fire Authority).
1
-
-
a. Pump shall be capable of furnishing not less than 150% of rated capacity at a head of not less than 65% of the rated head. The shut off head shall not exceed 120% of rated head.
1
-
-
b. Squirrel cage induction motor, TEFC type suitable for operation on 415 volts, 3 phase 50 HZ A.C supply, for the above pump with synchronous speed of 2900 RPM, conforming to IP 55 protection & class F insulation. The motor shall conform to IS 325-1978 (up to date) with flexible coupling and coupling guard, complete as required.
1
-
-
c. Common base plate for (a) and (b) from M.S. Channel for required size.
1
-
-
d. Suitable cement concrete foundation with cement concrete plaster (design and drawing to be provided by the Contractor while the foundation will be done by the client) complete with anti-vibration arrangement of cushy foot mountings.
2
-
345500
FIRE STAND BY PUMP
1
-
-
DIESEL DRIVEN (for standby pump)
1
-
-
Supply, installation, testing and commissioning of Diesel Engine driven fire pump suitable for automatic operation comprising of the following and conforming to BS 649/IS 10002 all amended upto date.
1
-
-
Horizontal, split casing, centrifugal pump, suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ AC supply. The installation shall be complete with flexible coupling and coupling guard (as per safety norms enclosed), as required. Fire pump shall have CI casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and SS (304) Shaft with mechanical seal, capable for delivering 2280 LPM at outlet head of 90 mts. to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost hydrant / sprinkler. The installation shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side. (The pump should be tested for bench mark at factory and shall be gotten approved by the Local fire Authority).
1
-
-
a. Pump shall be capable of furnishing not less than 150% of rated capacity at a head of not less than 65% of the rated head. The shut off head shall not exceed 120% of rated head.
1
-
-
b. Heat exchanger cooled (secondary cooling) diesel engine of speed 2050 RPM suitable for the above pump with automatic starting mechanism and other accessories including fuel tank (fabricated from 3mm MS sheet, painted with two coats of synthetic enamel paint over a coat of primer) of capacity adequate to sustain pump operation for 8 hours continuous working. The tank shall be fitted with Magnetic oil level indicator, MH with cover, drain valve, air vent including structural supports (painted with approved shade), 2 Nos. x 12 volt battery, heat exchanger with necessary piping connections & fittings, flexible coupling, coupling guard & exhaust pipe connection complete as required.
1
-
-
c. Common base plate for (a) and (b) from M.S. channel of required size.
1
-
-
d. Suitable cement concrete foundation with plaster, (design and drawing to be provided by the Contractor while the foundation will be done by client) complete with antivibration arrangement of cushy foot mountings.
1
-
539500
Supply, installation, testing and commissioning of jockey pump (pressurisation pump) comprising of the following:
1
-
-
a. Horizontal, split casing, centrifugal pump, suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ AC supply. The installation shall be complete with Flexible coupling and coupling guard, complete as required. Jockey pump shall be of stainless steel construction.
1
-
-
The pump head and base shall be CI GG20 construction and impellers, diffusers, shaft sleeve, seal bush & pump shaft shall be in SS 304 material. The pump shall be provided with mechanical seal The system shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side (The pump should meet the condition and shall be gotten approved by the Local fire Authority).
1
-
-
b. Squirrel cage induction motor TEFC type for operation on 415 V, 3 phase 50 HZ AC supply for the above pump with a synchronous speed of 2900 R.P.M. with flexible coupling and coupling guard etc. as required.
1
-
-
c. Common base plate for (a) and (b) from M.S. channel as required size.
1
-
-
d. Suitable cement concrete foundation with plaster, (design and drawing to be provided by the Contractor while the foundation will be done by others) complete with Antivibration arrangement of cushy foot mounting.
1
-
-
For pump defined above & of duty as follows :
1
-
-
For Hydrant & Sprinkler System
1
-
-
Flow : 180 LPM, Head : 54 mts
2
-
100500
Providing & fixing MS Class ‘C’ 100 mm dia diesel engine exhaust pipe (including all fittings, clamps, steel support) for the engine. The pipe shall be provided with 12 mm thick supercera ceramic fibre rope.
6
-
2150
Providing, fixing, testing and commissioning of precharged air vessel (size 450 mm dia & 2000 mm height) for pressurization of hydrant / sprinkler system complete with adequate pressure switches (as per design / requirement) with valves to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, 50 mm dia inlet with isolating valve duly painted from inside and outside complete as required.
1
-
16500
Providing & fixing dial type (100 mm dia) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI. Cost shall be inclusive of providing any short pieces, nipples, elbows etc as required.
8
-
1850
Providing and fixing liquid level controller for fire pump to cut off the pump in case low level of water in tank including cables, pannel etc. and making necessary connection to panel and commissioning as directed by Engineering Incharge.
2
-
4900
Providing and fixing 25 mm dia gun metal fitting for water level indicator gauge with isolation valve at top and bottom, heavy guage transparent polythylene tube of approx. 5 m length with colour indicator float clamped to teak board 100 mm wide x20 mm
4
-
5300
Providing, laying, jointing and testing of following sizes of MS 'C' class ERW pipes conforming to IS-1239 up to 150 mm dia and IS: 3589 from 200 mm dia and above with all accessories like all fittings (for pipes upto 50mm dia threaded forged steel fittings and for pipes above 50 mm dia MS fitting with welded joint shall be used) including tees, elbows, reducers, unions, flanges, rubber gaskets, GI nuts & bolts, washers including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fasteners) as per specification.
1
-
-
200 NB
12
-
4980
150 NB
12
-
3770
100 NB
12
-
2830
80 NB
12
-
1930
50 NB
12
-
1350
25 NB
12
-
630
Providing and Installation C.I. body bolted bonnet inside screw non-rising SS Stem Gate Valve (Sluice Valve) PN 1.6 as per IS:14846, lubricated asbestos gland packing and flange as per IS:1538. Body Test Pressure : 2.4 Mpa and Seat Test pressure: 1.6 Mpa
1
-
-
150 NB
5
-
15100
80 NB for tank drain (UGR )
1
-
8400
Providing and installation dual plate wafer type spring loaded, EPDM rubber lining seat, ductile iron disc and C.I. body Non Return Valve PN 1.6 as per IS: 5312
1
-
-
200 NB
1
-
14250
150 NB
5
-
8700
80 NB
1
-
4700
Providing and fixing suitable insertion between flanges as per BS-10 Table D/E wafer type spring loaded, Nitrile rubber lining seat, SG iron disc, AISI-410 SS STEM and C.I. body Butterfly valve PN 1.6 Hand lever operated, conforming to IS : 13095. Body Test Pressure:2.4 Mpa and Seat Test Pressure: 1.6 Mpa.
1
-
-
150 NB
8
-
7400
100 NB
12
-
5300
80 NB
36
-
3820
Providing and installation of GM Ball Valve, IS-318 LTB-2 SS Stem AISI 410, Ball SS 304/CF8, teflon gland packing, screwed female threads to IS-554,
1
-
-
25 NB
18
-
1750
15 NB
8
-
1550
Providing & fixing SS fire brigade suction hose coupling (draw-out connection) with nut for female coupling as per IS standards complete with 1 No. B. F. Valve, 1 no. NRV and 2 Nos.100 mm dia GI/MS suction pipe and 2 nos. 100 mm dia foot valve to be connected to static tank. Provision of GI/MS drop pipe and foot valve shall be made in all the fire water static storage tanks (GI/MS pipe to be paid separately through appropriate item while cost of foot valve 1 no. BF Valve, NRV also to be included).4 way
3
-
9400
CI ' Y ' type Strainer, screwed / bolted cover, Body Test Pressure : 21.09 Kg/sqcm and Working Pressure : 10.54 Kg/ Sqcm for suction pipeline of fire Pumps located at end of suction in common Sump. It shall be inclusive of matching flanges as per BS 10 Table - F along with required bolts, nuts , gaskets etc. complete with all respect
1
-
-
150 NB
1
-
15300
Providing and fixing electrically operated dual type pressure switches with threaded connection for a pressure vessel, complete suitable for 0-15 Kg/Sq.cm model IPS.
6
-
2250
Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia as per IS 12992 rated for 20 Kg/Sq.cm incluing 25 mm dia GM Ball Valve as per IS-318 LTB2
24
-
3250
Providing and Installation of vibration elimination pads for pumps.
1
-
-
Type A (for Jockey pumps)
8
-
950
Type B ( Main fire pumps)
8
-
950
Type C (for diesel driven pump)
4
-
950
Providing & Fixing of 10 HP Capacity terrace pump with Automated Panel with all fittings like pressure switch, pressure gauge, butterfly valves , NRV & Cablling arrangements
1
-
170000
ELECTRICAL INSTALLATION FOR FIRE PROTECTION SYSTEM
1
-
-
Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre shall be fabricated out of 14 gauge CRCA sheet steel in form in 3b formation with reinforcement of suitable size angle iron, channel ‘T’ sections irons and/or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Cadmium Plated hardware shall be used in fabrication of panels. Quoted rates shall inclusive of cables, cable trays, earthing wire (in accordance to specification) with earthing from panel to each motor / equipment.
1
-
-
MCC for Fire Fighting Systems
1
-
-
Incoming
1
-
-
a. 2 Nos. 400 amps 4 Pole MCCB complete with the following accessories :
1
-
-
i. 0-500 volts 96 x 96mm square voltmeter with selector switch shall be protected by 2 amps TP MCB
1
-
-
ii. 0-400 amps 96 x 96 mm square ammeter with 400/5 amps 15 VA CL:1 CT's and selector switch
1
-
-
iii. Phase indicating lamps shall be protected by 2 amps SP MCB
1
-
-
Bus bar
1
-
-
Aluminium bus bar sleeves type, rated at 500 amps for three phase & neutral phase bus bar shall have maximum current density of 1 amps per sq.cm. and the neutral bus bar of not less than 50% capacity.
1
-
-
Outgoing:
1
-
-
a. 2 Nos. 250 amps TPN MCCB outgoing feeders with 110 kW each DOL starters out going feeders to Hydrant / Sprinkler pump motor. The compartment shall contain CT operated ammeter of 0-250 amps range with selector switch auto / manual selector switch and indicating lamp with MCBs for `ON'/OFF`TRIP' status of motor.
1
-
-
d. 2 Nos. 63 amps TPN MCCB, 15 KW each Direct online starter with single phase preventer and outgoing feeder to Jockey Pump motor. The compartment shall contain CT operated ammeter of 0-75 amps and indicating lamps with MCBs for `ON'/OFF`TRIP' status of pump motors.
1
-
-
e. Providing and fixing 1 No. auto start panel activated with pressure switch for diesel engine complete with all accessories, batteries, battery charger of suitable rating, MCB timers, push buttons, microprocessor based alarm annunciator, wiring and cabling including connection to diesel engine complete as required ready for working.
1
-
-
f. Necessary cable alleys space for spare switches, internal wiring and copper earthing of all equipment shall also be included. All switch gears/control gears shall be motor duty rating.
1
-
-
Note:
1
-
-
All MCCB's to be suitable for motor duty and shall be of minimum 25 KA breaking capacity.
1
-
-
Provision shall be made for providing potential free contacts to all pumps starters for connection to building automation system.
1
-
-
Necessary cable alleys,wiring,cabling,cable tray and interlocking, earthing for all equipment shall also included
1
-
-
MCC as described above Including neccessary cables.
1
-
270500
FIRE HYDRANT SYSTEM INTERNAL & EXTERNAL (RISERS / YARD & TERRACE RING )
1
-
-
Providing and fixing TAC approved fire hose cabinet to house stand post fire hydrant, including all other related accessories fabricated from 16 gauge M.S. sheet of fully welded construction having front door with locking arrangement, partially glazed with 4 mm thick glass. Cabinet shall be painted with post office red colour.
24
-
3400
Providing & fixing 63 mm dia 15 mtr. long Reinforced rubber lined hose pipe including gunmetal male & female instantaneous type coupling machine wound with G.I. Wire complete in all respects. Hose shall permaline hose and coupling to IS:903-1975 with ISI certification (two hose per Hydrant) approved by fire authority.
48
-
4750
Providing & fixing fire hydrant valve with single outlet, SS IS:5290:1983 type "A" grade with 80 mm N.B. flanged inlet, brass spindle, 63mm female instantaneous outlets, complete with gunmetal blank caps chains, bearings IS:6290 mark and having TAC approved flange O.D. 220mm PCD 180mm eight 19mm dia holes.
24
-
6000
Providing & fixing SS 63mm dia. Short branch pipes with 20 mm dia. Nozzles, ISI Marked (IS:903) as per approved make.
24
-
1850
Providing & fixing swinging type First Aid hose reel in red colour drum with 30 mts long and 20 mm dia heavy duty rubber water hose including 20 mm dia ball valve, terminating with G.M. coupling & nozzle of 6mm outlet with shut off valve confirming to IS 8090 - 1976 complete with MS socket for tap-off, drum and brackets (including painting) for fixing on wall with anchor fastner, bolts & nuts conforming to IS:884-1969 complete as required.
18
-
6300
Providing, laying, jointing and testing of following sizes of MS 'C' class ERW pipes conforming to IS-1239 up to 150 mm dia and IS: 3589 from 200 mm dia and above with all accessories like all fittings (for pipes upto 50mm dia threaded forged steel fittings and for pipes above 50 mm dia MS fitting with welded joint shall be used) including tees, elbows, reducers, unions, flanges, rubber gaskets, GI nuts & bolts, washers including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fasteners) as per specification.
1
-
-
80 mm dia
12
-
1930
100 mm dia
212
-
2830
150 mm dia
160
-
3770
SPRINKLER SYSTEM
1
-
-
Providing, laying, jointing and testing of following sizes of MS 'C' class ERW pipes conforming to IS-1239 up to 150 mm dia and IS: 3589 from 200 mm dia and above with all accessories like all fittings (for pipes upto 50mm dia threaded forged steel fittings and for pipes above 50 mm dia MS fitting with welded joint shall be used) including tees, elbows, reducers, unions, flanges, rubber gaskets, GI nuts & bolts, washers including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fasteners) as per specification.
1
-
-
a) 25 mm dia
684
-
630
b) 32 mm dia
280
-
805
c) 40 mm dia
404
-
1065
d) 50 mm dia
684
-
1350
f) 80 mm dia
204
-
1930
g)100 mm dia
108
-
2830
Providing, fixing, jointing and testing in position the for drainage purpose following medium class (Class B) G.I. pipes conforming to IS:1239 cut to required lengths including all necessary fittings (All fittings shall confirm to IS:1879 (part 1 to 10) and specials such as bends, tees, unions, Reducers, flanges & plugs etc. fixing at wall / ceiling level supported by clamps, hangers (using anchor fastners) etc, as per specification. Threading, jointing, and making proper connections, cutting hole in wall / floor / slab and making good the same.
1
-
-
Welding of any kind on the galvanized support / hanger shall not be permitted.
1
-
-
a) 80 mm dia
12
-
1950
15mm dia. Chrome finished sprinkler head as per IS:9972 with standard response 5mm quartz bulb and to operate at 68°C (of K-Factor 80) complete as per given specifications.(UL Listed/FM Approved)
1
-
-
a) Pendent type/ Side wall
798
-
490
Providing and Fixing electrically operated water flow switches (Vane type) including tamper switch and accessories, complete with tap off socket arrangement as required, with potential free contact with 2 Nos. NONC.
1
-
-
b) 100 /80 mm dia
6
-
8500
Structural support in MS angle , Tie rods, Ubolds etc . installation of sprinkler systems with all accessories.
1
-
140000
Portable Chemical Fire Extinguishers
1
-
-
Providing and Installation of CO2 type Fire Extinguisher 4.5 ltrs capacity fitted with Gun Metal cap and nozzle and wall suspension brackets confirming to IS:940 complete with initial refill consisting of ISI marked CO2 gas cartridge of 60 gms. Capacity conforming to IS: 4947
23
-
6300
Providing and Installation of Mechanical Foam type Fire Extinguisher 09 ltrs capacity fitted with Gun Metal cap along with wall bracket confirming to IS: 10204 complete with initial refill consisting of ISI marked CO2 gas cartridge of 60 gms capacity conforming to IS: 4947 and ISI marked AFFF conforming to IS: 4989. for Fire Pump room
4
-
4000
Providing and Installation of ABC 6 KG CAP type Fire Extinguisher. In HP Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged complete in all respects including wall suspension bracket
60
-
2600
FIRE DETECTION SYSTEM
1
-
-
Supply, installation, testing and commissioning of microprocessor based UL compliant analog addressable intelligent fire alarm control panel 4 Loop complete with central processing unit. Network communication cards RS-485 port, 6" LCD display with 200 charecter for each evetnt with 5 events at a time with battery backup with all necessary software . make : Honeywell
2
-
486500
Supply, Installation, testing and commissioning of intelligent addressable Multi detectors
590
-
3400
Supply, erection, testing & commissioning of Manual call point in sheet steel box with hammer & chain.
18
-
3800
Supply Installation testing and commissioning of flasher cum electronic hooter (dual tone)
18
-
5050
CABLES & ACCESSORIES
1
-
-
Supply of 2X1.5 sq.mm PVC insulated copper wirs ISI marked on wall/celling in concealed BEMS pipe for connection of smoke detectors inclufing termination of cables by socking, mending good, etc as required. aRMOUR
3600
-
152
SIGNAGES
1
-
-
Exit, WAY TO EXIT, FIRE EXTINGUISHERS, HOSE REEL SIGNAGES
180
-
700
FLOOR MOUNTING ESCAPE TAPES
300
-
185
PA SYSTEM
1
-
-
Supply installation of amplifier , mike and 24 numbers of speaker as per specification and approved by the fire department , ISI and other standards
1
-
245000
CABLES & ACCESSORIES
1
-
-
Supply of 2X1.5 sq.mm PVC insulated copper wirs ISI marked on wall/celling in concealed PVC pipe for connection of PA system inclufing termination of cables by socking, mending good, etc as required.
7000
-
128
HVAC
1
-
-
Design SITC of VRV/VRF outdoor units equipped with highly energy efficient Scroll Compressors (ONLY) with all inverter compressor(s) with, VRV System shall be suitable for working on 48°C ambient temperature, Refrigerant R 410A. (COOLING Only) Individual ODU Capacity not more than 20HP
1
-
-
ODU Details
1
-
-
14 HP
1
-
314000
18 HP
2
-
388000
20 HP
1
-
427000
22 HP
2
-
532000
24 HP
1
-
563000
26 HP
1
-
600000
28 HP
1
-
640000
30 HP
1
-
673000
32 HP
1
-
711000
34 HP
1
-
753000
50 HP
1
-
1095000
INDOOR UNITS DETAILS
1
-
-
Round Flow / 4-Way CASSETTE AC With Cardless Remotes and Pannels.
1
-
-
1.00 TR Compact Cassette AC
12
-
52000
1.65 TR Round Flow VRV Cassette AC with VRT
14
-
56000
2.0 TR Round Flow / 4-WAY VRV Cassette AC
18
-
59500
2.5TR Round Flow / 4-WAY VRV Cassette AC
8
-
64000
3.0 TR Round Flow /4-WAY VRV Cassette AC
30
-
66500
4.0 TR Round Flow /4-WAY VRV Cassette AC
19
-
69000
4.5 TR Round Flow /4-WAY VRV Cassette AC
6
-
71000
DUCTABLE AC
1
-
-
4.0 TR Ductable AC(With Wireless Remote)
1
-
64500
6.0 TR Ductable AC (With Wired Remote)
1
-
118500
8.0 TR Ductable AC (With Wired Remote)
8
-
128000
HI WALL SPLIT
1
-
-
2.0 TR Ductable AC(With Wireless Remote)
12
-
36610
Design SITC of VRF new Central Remote Controller / Manager controling HVAC system
1
-
190000
TREATED FRESH AIR(TFA)
1
-
-
SITC of VRV / VRF Treated fresh air units of the following capacities including shifting, prefilters, supports, fire retardant double canvas connection with zip and outlet damper made with GI construction, units shall be with R 410A Refrigerant.
1
-
-
4TR
1
-
121000
6TR
4
-
148000
8TR
1
-
158000
Design SITC of REFNETS / Y-Branches/ ODU Connector
132
-
8500
Design SITC of the Cu. refrigerant pipes with 19mm/13mm with nitrile rubber tube insulation of following sizes
1
-
-
Gas line with 19mm thick insulation
1
-
-
41.3mm
180
-
2583.86
34.9mm
160
-
2157.5
28.58mm
220
-
1802.2
22.2mm
128
-
1542.06
19.05mm
125
-
1408.3
15.88mm
400
-
1355.48
12.7mm
15
-
1015
Liquid line with 13mm thick insulation
1
-
-
19.05mm
205
-
1324.86
15.88mm
250
-
1232.9
12.7mm
178
-
1205.16
9.52mm
580
-
1155
6.35mm
15
-
870
Design, supply, fabrication & erection of air distribution GSS Ducting in accordance with the approved ducting lay out drawing, complete with all accessories, dampers, guide vanes, support, etc.
1
-
-
24 G GP Sheet
400
-
900
22 G GP Sheet
145
-
1100
Design SITC of Acoustic insulation inside the SA Ducts with 12 mm thick F.G. & 36 G purported aluminium.
150
-
900
Design SITC of Providing insulation over the ducts with 13mm thick Aluminium foil faced nitrile fome insulation.
400
-
975
Design SITC of Providing & Connecting canvas in mouthpiece.
16
-
4100
Design SITC of Dynacraft/metal forge/carryair/Premear or equivalent make linear grills or extruded aluminium section finished with power coated or approved colour.
1
-
-
Grill/Diffuser
95
-
13200
VCD
30
-
10450
I-Ball diffuser(225mm neck size)
24
-
6376.27
Fire Damper
18
-
33000
Control & Transmission Wiring
1
-
-
Supply Installation Testing and Commission of Control wiring of 2 core x 1.5 sqmm copper in suitable conduits between indoor and outdoor units
1800
-
225.83
Supply Installation Testing and Commission of PVC drain pipe with 6mm thick nytrile tube insulation.
1
-
-
32mm
350
-
513.63
40mm
130
-
584.49
50mm
90
-
655.34
Design SITC of GI Slotted Tray for expose copper piping covered with GI sheet(22G) on terrace & in shaft if open.
1
-
-
50mmx150mm X 50mm
30
-
973.75
50mmx300mm X 50mm
50
-
1372.67
Design Sitc of VRV systems including topping R410A gas as per site requirements
250
-
1750
Scaffolding, Out door unit base & Other miscelineous works
1
-
1200000
Round Inline fans
1
-
-
Supply, installation, testing and commissioning of Round Inline fan of following capacities including, supports, canvas connections, motor, etc. Fan shall be installed with five speed fan regulator for changing the speed.
1
-
-
440 CFM with 10mm static
1
-
21700
670 CFM with 10mm static
2
-
26000
Propellar Fans
1
-
-
75 CFM
6
-
7500
90 CFM
3
-
10500
150 CFM
1
-
13000
200 CFM
2
-
17500
Lift well pressurization 25MM Static
1
-
-
Tube Axial flow fan
1
-
-
14000 CFM
1
-
85500
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements