Odisha Power Transmission Corporation Limited Tender

RCC (1:1.5:3) M20 grade in Foundation and Plinth, footings, bases of columns, mass concrete, precast slabs etc having a minimum compressive strength 20 N/mm2 ( in work test of 200 Kg per CM2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S.516 using 12 mm to 20 mm size hard black crusher broken granite stone chips (20 mm size not to exceed 25% ) including hoisting, lowering, laying compacting concrete by using concrete mixer vibrators and similar equipments and tools and plants with watering and curing for 28 days including centering, shuttering and finishing the exposed surfaces smooth providing grooves or beads where necessary including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects but excluding the cost of M.S. rods or tor steel and binding wires and labour charges for cutting, bending, binding and tying the grills etc complete as per the direction of the Engineer - in - charge.

RCC M20 grade in Column and Beam having a minimum compressive strength 20 N/mm2 ( in work test of 200 Kg per CM2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S.516 using 12 mm to 20 mm size hard black crusher broken granite stone chips (20 mm size not to exceed 25% ) including hoisting, lowering, laying compacting concrete by using concrete mixer vibrators and similar equipments and tools and plants with watering and curing for 28 days including centering, shuttering and finishing the exposed surfaces smooth providing grooves or beads where necessary including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects but excluding the cost of M.S. rods or tor steel and binding wires and labour charges for cutting, bending, binding and tying the grills etc complete as per the direction of the Engineer - in - charge.

Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance ± 2 % having crushing strength not less than 75 Kg./Cm2 in cement and sand mortar ( 1:6 ) in Superstructure using , including splays cutting,circular molding& corbeling,chamfering & similar such type of works,watering and curing etc complete including cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge.

Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance ± 2 % having crushing strength not less than 75 Kg./Cm2 in cement and sand mortar ( 1:6 ) in F& P using , including splays cutting,circular molding& corbeling,chamfering & similar such type of works,watering and curing etc complete including cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge.

16 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth over inside rough surfaces of brick masonry walls etc with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge.

12 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth over inside rough surfaces of brick masonry walls etc with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge.

Wall painting two coats with weather shield coat of approved shade over wall surface finished smooth to give an even shade including watering,curing etc complete including cost,conveyance,taxes of all materials and cost,conveyance,taxes of all labour with T&P required etc complete in all respects as per the direction of Eng.-in-charge.

Priming one coat with of approved quality of primer of Berger make including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge. (over plastered wall surface)

Supplying,fitting,fixing, and placing uncoated HYSD Bar reinforecement including straightening ,cutting, bending, binding by using binding wire of18-20 gauze , molding, welding, jointing if necessary and placing in position as per drawing & technical specification ( Payment shall be made on weight of M.S. Rod & Tor steel only and no separate payment will be made towards the weight of binding wires) including cost,conveyance, royalties and taxes of all materials and cost, conveyance,taxes of all labour T & P required etc complete as per direction of Engineer in charge.

Supplying all labour with t & P required for removal of excess earth and debris by mechanical means up to a distance of 5 KM including cost taxes of all labour with T & P required etc complete in all respect as per direction of EIC.

Supplying, fitting, fixing of Y-angle of 50mm X 50mm X 6mm angle section including cost of materials, labour, taxes, cost conveyance, T&P as required etc. complete.

Providing, supplying, fitting and fixing of M.S. grill gate, made out of M.S. flat and M.S. angle , M.S. square bar conforming to IS 1977/ 1975 of approved design and drawing (design and drawing to be supplied from the Engineer in charge) including drilling holes in frames etc supplying required size of M.S. screws and cutting grooves or beads where necessary including cost, conveyance, and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per direction of the Engineer in charge.

Providing and fixing Concertina Coil Fencing with punched tape concertina coil 600 mm dia 10 Mtr openable length (toal length 90M), having 50 nos rounds per 6 M length, upto 3 M height of wall with existing angle iron 'Y' shaped placed 2.4 M or 3.00 M apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per the direction of Engineer - in - Charge, with reinforced barbed tape (R.B.T) / spring core (2.5 mm thick) wire of high tensile strength of 165 Kg/Sq.mm with tape (0.52mm thick) ad weight 43.478 gm/meter (cost of M.S. angle, CC blocks shall be paid separately)

Painting two coats with synthetic enamel paints to iron / wooden doors and windos with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge

Priming one coat with of approved quality of primer of Berger make including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge (over iron work)

Supplying fitting fixing of Filling bitumen and cement and jute fibre in expansion joints inclusive of cost of materials, bitumen and cement proportion (3:1) including cleaning before pouring 12mm to 25mm and 15cm depth. of approved quality and dimensionincluding cost, conveyance royalities and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in Chage.

6 mm thick cement plaster with cement and sand mortar (1:4 ) finished smooth over inside rough surfaces of brick masonry walls etc with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge.

Clearing shrub jungles uprooting stumps and small bushes and trees below 1M girth on premeasurement. of approved quality and dimensionincluding cost, conveyance royalities and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in Chage.