Odisha Power Transmission Corporation Limited Tender

Supplying of labour for extra lift or part there of over the initial lift of 1.5m in all kinds of eath work (1st extra lift of 1.5mt )(upto 7.5m)

Supplying all labour and T&P for removal and disposal of surplus earth by mechanical means upto a distance of 5 km with collecting and stacking of same with head load 50 mtr including loading and unloading for truck transportation including cost, conveyance of all labours with T&P as required for the work etc complete as per the direction of the EIC.

Supplying all labour with T&P for filling foundation and plinth with excavated material including watering, ramming etc comolete including cost , conveyance , royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete (measurement will be taken on finished & complete section only) as per the direction of the Engineer in charge.

Supplying all labour with T&P for filling foundation and plinth with sand including watering, ramming etc comolete including cost , conveyance , royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete (measurement will be taken on finished & complete section only) as per the direction of the Engineer in charge.

Cement concrete with (1:3:6) in foundation and floors using 40 mm ( 1 ½ ‘’) size black hard crusher broken granite stone metal of approved quality from approved quarry including lower laying concrete watering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge.

RCC work of M25 grade having a minimum compressive strength 25 N/mm2 ( in work test of 250 Kg per CM2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S.516 using 12 mm to 20 mm size hard black crusher broken granite stone chips (20 mm size not to exceed 25% ) including hoisting, lowering, laying compacting concrete by using concrete mixer vibrators and similar equipments and tools and plants with watering and curing for 28 days including centering, shuttering and finishing the exposed surfaces smooth providing grooves or beads where necessary including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects but excluding the cost of M.S. rods or tor steel and binding wires and labour charges for cutting, bending, binding and tying the grills etc complete as per the direction of the Engineer - in - charge.

FOUNDATION

RCC WALLS

COLUMN

Supplying,fitting,fixing of MS rod or tor steel including straightening ,cutting, bending, binding by using binding wire of18-20 gauze , molding, welding, jointing if necessary and placing in position as per drawing & technical specification ( Payment shall be made on weight of M.S. Rod & Tor steel only and no separate payment will be made towards the weight of binding wires) including cost,conveyance, royalties and taxes of all materials and cost, conveyance,taxes of all labour T & P required etc complete as per direction of Engineer in charge.

16 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth over inside rough surfaces of brick masonry walls c with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge.

Painting two coats with weather shield coat on wall surface with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge

Priming one coat with af approved quality of primer of APPROVED make including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge

Providing, supplying, fitting and fixing of M.S. door,window, grill gate,ladder made out of M.S. flat and M.S. angle , M.S. square bar conforming to IS 1977/ 1975 of approved design and drawing (design and drawing to be supplied from the Engineer in charge) including drilling holes in frames etc supplying required size of M.S. screws and cutting grooves or beads where necessary including cost, conveyance, and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per direction of the Engineer in charge.

Supplying all labour with T&P for filling foundation and plinth with sand in 22.5cm (9") thick layers including watering, ramming etc comolete including cost , conveyance , royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete (measurement will be taken on finished & complete section only) as per the direction of the Engineer in charge.

CESS