Odisha Power Transmission Corporation Limited Tender

Description

FURNITURE WORK

Supply,delivery,installation & commisioning of CURVILINEAR SHARING & NON SHARING WORKSTATION @ 1500 / 1500LX 600/600DX1200HT WITH PEDESTAL (2B+1F) MAIN PARTITION : 60 MM THK Slide-in Tile Based Partition of 1200mm Ht. with powder coating finish WIRE MANAGEMENT : One Raceway at Skirting , Second Raceway - Above Table Top. FINISHES ABOVE TABLE TOP : Fabric Pin up / Lam marker. FINISHES BELOW TABLE TOP : 9 mm Thk. TABLE TOP : 25 MM thk. Postlam HDHMR Board with 2mm PVC Edge band on all side.Table top at 750mm height from floor level. Cut-out provision for wire manger or Access flap as required.GABLE END : 25 MM thk. Postlam HDHMR Board with machine pressed PVC Edge bandon all side.BRACKET : Corner & Cantilever bracket for worktable support finished in powder coatingPVC GROMMET .PEDESTAL @ 400LX450DX670HT :2B+1F Drawers with Leveller finish in 18 MM thk. Postlam HDHMR Board 2MM PVC Edge band to all Exposed Area & Metal Drawer with Centralized Lock & C type handle. sustain heavy loads. MODESTY:- The slant modesty panel of dark shade i.e slate grey colour is made up of 18mm thick pre-laminated particle board. The dark shade modesty and light shade tabletop provides and elegant duel colour finish to the tabletop. The modesty provides proper stability to structure and allow sufficient leg privacy to user. RETURN STORAGE:- The overall dimension of the return storage of size 2250(W) X 548(D) X 675(H). The top panel and the bottom panel of the storage are made up of 25mm thick pre-laminated particle board and the side panels and vertical panels are of 18mm thick made up of pre-laminated particle board. All these panels are fitted with the back panel by proper grooving on it which is of 9mm thickness made up of pre-laminated particle board. The storage is assembled with the help of wooden dowel, knock down fittings drum with screw and corner fittings to ensure the stability of box structure formed. The storage is divided into two sections i.e drawers unit, self and shutter. The three drawers are of size 450(W) X 400(D) X 135(H) are made up of 15mm thick pre-laminated particle board. All the self of the storage is made up of 18mm thick pre-laminated particle board whereas the sliding shutter and drawer facia is of 18mm thick pre-laminated particle board having dark shade with proper provision of centralizes locking for all three drawers and shutter separately. S.S finish handle 96 CD are fitted on the shutter and drawer facia. Skriting of 75mm height with proper levellers are provided at the bottom of the storage to adjust in an uneven surface.including all conection as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge