Odisha Power Transmission Corporation Limited Tender

Providing Close Deep Chipping on RCC Roof surface with washing and cleaning the same for receiving cement plaster etc including removing & disposing the debris etc. within 50mtr. Lead including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respects as per the direction of the Engineer-in- charge.

Filling in Foundation and Plinth with sand well watered and rammed, laid in layers not exceeding 150mm in thickness suitable to drawing and design compacted to required depth etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineering charge.

Cement Concrete work of proportion (1:4:8) in bed of foundation / basement of floor etc. using 40mm size hard black crusher broken granite stone metal of approved quality and from approved quarry laid in layers not exceeding 150mm thick compacted to required depth suitable to drawing and design for the site with watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Brick masonry work with cement mortar (1:6) in Foundation and Plinth using Fly-Ash bricks of size 23cm X 11cmX 8cm having crushing strength not less than 75 kg/Sqcm with dimensional tolerance + 2%and immersing the bricks for six hours before use in masonry work with splays, cutting, corbelling, chamfering, circular moulding and similar such type of works , watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Brick masonry works with cement mortar (1:6) in Super Structure using Fly-Ash bricks of size 23cm X 11cmX 8cm having crushing strength not less than 75 kg/Sqcm with dimensional tolerance + 2% and immersing the bricks for six hours before use in masonry work with splays, cutting, corbelling, chamfering, circular moulding and similar such type of works , watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

12mm thick Sand and Cement plaster of proportion (1:6) finished smooth over smooth surfaces of brick masonry walls including racking out the joints with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

12mm thick Sand and Cement plaster of proportion (1:4) including neat cement punning finished smooth over smooth surfaces of brick masonry walls including racking out the joints with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Providing Precast Slab made with Reinforced Cement Concrete (RCC) work (1:1½ :3) in using 12mm (½ inch) size hard black crusher broken granite stone chips of approved quality from approved quarry with watering and curing for 28 days to attain the required strength with cost of centering, shuttering and cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Cement Concrete work of proportion (1:2:4) in Column etc. as using 12mm size hard black crusher broken granite stone chips of approved quality and from approved quarry lead in layers not exceeding 150mm thick compacted to required defth suitable to drawing and design for the site with watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineering charge.

Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in TieBeams using 12mm (½ inch) size hard black crusher broker granite stone chips pf approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

16mm thick Sand and Cement plaster of proportion (1:6) finished smooth over rough surfaces of brick masonry walls including racking out the joints with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Providing & supplying for fitting & fixing Rafters & purlins etc. made of M.S. Struss for roofing etc. including cutting into size, making welding/bolting etc. placing in proper position embeding with cement concrete & finishing with cement plaster as per required dimension confirming to drawing and design including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respects as per the direction of the Engineer-in- charge.

Providing and supplying for Roofing Works using Colored-Galvanised-Corrogated-Iron-sheets on gable roof houses including hoisting, lowering, laying and placing the iron sheets in proper position for fitting and fixing over roof truses, rafter, purlins with drilling holes in wind ties and fixing of ridges, valleys, wind ties etc complete by means of fittings and fixtures like J/L hooks nuts. bolts, bitumen/MS washer and sealing materials like Pitch, coaltar, putty, paint etc sealed around the hooks in the holes etc complete in all respect including cost, conveyance, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respects as per the direction of the Engineer-in-charge.

Providing Floor Tiling works in floors using Vitrified Tiles of size 600mm X 600mm of approve make & quality conforming to IS: 13755 laid to proper slope over 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality etc including rubbing and polishing complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Providing Wall Tiling works in Dado,Skirting,rises of steps and vertical face of wall using Ceramic Tiles of premium grade and standard size of approve make & quality fixed over 12mm thick cement mortar (1:3) and jointed with cement slurry mixed with pigments to match the shade of the tiles,finishing with white cement etc including rubbing and polishing complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Providing fitting and fixing of Aluminium Composit Pannel (ACP) door for bath and toilets made out of Aluminium Section No. 9835 as Horizontal & vertical members placed for framing the styles including top, bottom & lock rail and shuttering with 3mm thick Aluminium Composit Pannel sheet (ACP sheet) fitted and fixed to required size to suit the drawing & design of the opening etc complete including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Providing and Supplying for Plumbing & laying Un-plastisized PVC (UPVC) pipe (Confirming to IS-4985 of Class-IV-10 Kg per Sq.Cm) of approved make and quality for internal water supply in house plumbing with the following nominal dia with fittings, clamps etc firmly fixed to walls ,floors and ceiling etc with making good to the damages happened to surfaces etc including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge.

UPVC pipe- 20mm dia (Oriplast/Jaiswal)

12mm thick Sand and Cement plaster of proportion (1:4) finished smooth over smooth surfaces of brick masonry walls including racking out the joints with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Supplying and fixing of Armstrong fine fissured False Ceiling System on 24mm flange stitched suspension prelude xl gris system having main Tee 3000mm long X 32mm web height X 24mm wide Tee sections. The main runner is to be fixed with 2mm thick pre-stretched GI wire with Soffit Cleat and GI Rawl plug inserted on the main roof to be fixed at 1200mm C/C.The Last hanger at the end of each main runner should not be greater that 450mm from the adjacent wall. The main Runner will be at the distance of 1200mm C/C. The flush fitting 1200mm X 30mm X 24mm wide Cross Tee Sections, with precesion stub end is to be clicked fit in betweeen the main Tee at a distance of 600mm to make a module of 1200mm X 600mm, another cross Tee with precesion stub stop end of size 600mm X 27mm X 24mm is to be click fitted at 1200 Sections parallel to main Tee at 600mm C/C to make a square grid of 600mm X 600mm, or base frame material click end shouldbe made of old rolled Tee steel components and coated with hot deep Galvanized Tee ( 170 gm/sqm, Zinc layer meeting the requirements of BS 2989.) It should have a capping of material coated with baked polyester. The peri meter trim of size 19mm X 19mm white colour secured at 450mm C/C with provision for accomodating ceiling illumination system etc complete including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Providing for Illuminating Appliances in false ceiling works with Ceiling mounted 40 Watt LED Pannel fittings of Havels/Syska/ Philips make with necessary electronic, reflector etc, power connection complete for operating/working perfectly duly fitted and fixed with Aluminium false ceiling grid suitable to size including cutting making etc including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Suppying all labour and T&P for Wiring to Recess light points with 1.5 sqmm single core copper wire of approved quality, including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Providing Supplying, Fitting, Fixing M.S. Shutter with Choukath etc made with M.S. Angle, Chennel, Flat and Iron Sheet to suitable dimension at the occasion at the site fabricated as per approved design and drawing with cutting, turning, welding, providing holes/grooves as per necessity, fitted with locking arrangements, handles etc, dully fixed at the opening in proper position with clamps well embedded in masonry walls/ RCC members with C.C.(1:1½ :3), finished with 12mm CP(1:3) etc complete including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge.

Providing and Making Re-enforcing Grills for RCC works with MS rod,tor-steel of required diameter and binding wires of 18 to 20 gauge with straightening, cutting, bending, binding, tying the grills and placing in position suiting to the form-work for RCC structural member as per the drawing and design at site including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineering charge.(Payment shall be made on weight of MS rod/tor-steel only and no separate payment for binding wires)

Providing Primming one coat with primer over plastered surface of approved quality and make painted and finished after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.

Providing for Weather coat two coats of approved quality, make and shade washed and finished smooth over exterior surfaces of wall etc after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.

Providing Painting two coats with Enamel Paint over one coat of primer to iron works of approved quality, make and shade, painted and finished smooth after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.

Providing for plumbing & Laying of PVC (SWR) Pipes and Specials in House plumbing for Rain water disposal/ Vent Pipe of the following diameter for all classes with fittings and specials to walls jointed with approved quality solvent cement by non-heat application method and with nails bobbins and wooden plugs etc as per specification with including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge.

4” (110mm) dia PVC pipe (SWR) (Oriplast/Jaiswal)

Providing for Laying and Plumbing PVC (SWR) Fittings and Specials in following category in Sewerage System pipe line assembly duly fitted and fixed to walls jointed with approved quality solvent cement by non-heat application method and also with nails bobbins and wooden pluge etc as per specification etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge.

PVC Plain Bend- 4” dia (Oriplast/Jaiswal)

Providing for Finishing surfaces of wall /ceiling with cement/water based wall putty of approved quality and make and finished smooth and even surface to receive painting etc complete including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements for scaffolding, staging etc required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Providing Painting two coats with plastic emulsion paint of approved quality, make and shade washed and finished smooth over surfaces of wall and ceiling after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.

Providing Painting two coats with Enamel Paint to wood works of approved quality, make and shade, painted and finished smooth after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.

Providing Floor Tiling works in floors, treads,on steps and landing using Ultra Chequred tiles of premium grade and standard size of approve make & quality laid over a bed of 25mm thick cement mortar (1:1) and jointed with cement slurry mixed with pigments to match the shade of the tiles, finishing with white cement etc including rubbing and polishing complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.

Providing and Supplying for Removal and Disposal of surplus earth, debries, garbages etc with mechanical means like transportation by Truck /Tractor with loading and unloading of the materials to a distance up to 5 Kms etc complete including cost of Transportation charges and labour with T&P for collecting, loading, unloading, removal & disposal in all respects as per the direction of the Engineer-In-Charge

CESS1%