Odisha Power Transmission Corporation Limited Tender

First class brick masonry in cement mortar ( 1:6 ) in SS without brick dimensional tolerance (+or-) 8% and crushing strength not less than 75Kg/cm2 after immersing the bricks for six hours in water before use, including splays cutting,circular molding& corbeling,chamfering & similar such type of works,watering and curing etc complete including cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge.

Cement concrete with (1:1.5:3) in using 12 mm size black hard crusher broken granite stone chips of approved quality from approved quarry including lower laying concrete watering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge.

RCC (1:1.5:3) M20 grade in column and beam having a minimum compressive strength 20 N/mm2 ( in work test of 200 Kg per CM2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S.516 ) using 12 mm to 20 mm size hard black crusher broken granite stone chips ( 20 mm size not to exceed 25% ) including hoisting, lowering, laying compacting concrete by using concrete mixer etc complete

Supplying,fitting,fixing of MS rod or tor steel including straightening ,cutting, bending, binding by using binding wire of18-20 gauze , molding, welding, jointing if necessary and placing in position as per drawing & technical specification ( Payment shall be made on weight of M.S. Rod & Tor steel only and no separate payment will be made towards the weight of binding wires) including cost,conveyance, royalties and taxes of all materials and cost, conveyance,taxes of all labour T & P required etc complete as per direction of Engineer in charge.

12 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth over outside rough surfaces of brick masonry walls etc with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge.

16 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth over inside rough surfaces of brick masonry walls c with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge.

Priming one coat with af approved quality of primer of Berger make including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge

Painting two coats with weather shield coat on wall surface with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge

Providing,fitting,fixing concertina coil fencing with punched tape concertina coil 600mm dia 10mtr. openable length (total 90mt.),having 50 nos. rounds per 6m. length,upto 3m. height of wall with existing angle iron Y shaped placed 2.4m. or 3.0m. apart and with 9 horizontal R.B.T. reinforced barbed wire,stud tied with GI staples and GI clips to retain horizontal,including necessary bolts or GI barbed wire tied to angle iron,all complete as per the EIC,with reinforced barbed tape(RBT)/spring core(2.5mm thick)wire of high tensile strength of 165kg/sqmm with tape(0.52 mm thick)and weight 43.478 gm/mtr.(cost of MS angle,CC blocks shall be paid separately.)Providing,fitting,fixing concertina coil fencing with punched tape concertina coil 600mm dia 10mtr. openable length (total 90mt.),having 50 nos. rounds per 6m. length,upto 3m. height of wall with existing angle iron Y shaped placed 2.4m. or 3.0m. apart and with 9 horizontal R.B.T. reinforced barbed wire,stud tied with GI staples and GI clips to retain horizontal,including necessary bolts or GI barbed wire tied to angle iron,all complete as per the EIC,with reinforced barbed tape(RBT)/spring core(2.5mm thick)wire of high tensile strength of 165kg/sqmm with tape(0.52 mm thick)and weight 43.478 gm/mtr.(cost of MS angle,CC blocks shall be paid separately.)Providing,fitting,fixing concertina coil fencing with punched tape concertina coil 600mm dia 10mtr. openable length (total 90mt.),having 50 nos. rounds per 6m. length,upto 3m. height of wall with existing angle iron Y shaped placed 2.4m. or 3.0m. apart and with 9 horizontal R.B.T. reinforced barbed wire,stud tied with GI staples and GI clips to retain horizontal,including necessary bolts or GI barbed wire tied to angle iron,all complete as per the EIC,with reinforced barbed tape(RBT)/spring core(2.5mm thick)wire of high tensile strength of 165kg/sqmm with tape(0.52 mm thick)and weight 43.478 gm/mtr.(cost of MS angle,CC blocks shall be paid separately.)

Providing, supplying, fitting and fixing of M.S. Angle of size 50 x 50 x 5mm of U-shape angle and placing in position as per design and drawing (design and drawing to be supplied from the Engineer in charge) including drilling holes in frames etc supplying required size of M.S. screws and cutting grooves or beads where necessary including cost, conveyance, and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per direction of the Engineer in charge.

Painting one coats with synthetic enamel paints to over a coat of primer with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge

Supplying all labour with T&P for filling foundation and plinth with earth taking from a distance 5 km by mechanical means including watering, ramming etc comolete including cost , conveyance , royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete (measurement will be taken on finished & complete section only) as per the direction of the Engineer in charge.

Carriage of debries and waste material from work site within a lead of 50km including all cost of labour etc complete.