Odisha Hydro Power Corporation Limited Tender

Cutting in disiintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered as per direction of EIC.

Earth filling in foundation with excavated materials including labour as per direction of EIC.

Filling F & P with sand,well watered & rammed including cost of all materials ,labour,royalty,taxes & duties complete & as directed by the EIC .

Cement concrete (1:3:6) with 4cm size hard granite metal and as per direction of EIC .

CC (1:2:4)/M15 with 12mm down graded size HG Chips including cost of all materials ,labour ,royalty ,taxes & duties.

R.C.C work of M20 (1:2:4) having compressive strength (in work test) 200kg/cm2 in 15cm tubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12mm to 20mm size (1/2" to 3/4") crusher brocken hard granite chips of 20 mm size (not exceed 25%) of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator,watering and curing for 28 days cost of rigid and smooth centering and shuttering and finishing to exposed surface smooth providing grooves or beads wherever necessaary as per direction of EIC including cost of conveyance, royalties and taxes of al materials and cost of all labour, T&P etc as required for the work complete in al respect as per direction of EIC but excluding cost of M.S rod/TOR steel and binding wires and labour charges for bending, binding and tying grills etc complete as per drawing design and direction of EIC.

12mm. thick cement plaster in cement mortar (1:4) for flyash brick work.

Brick masonry work with C.B bricks having crushing strength not less than 75kg/sqm in cement mortar(1:6) in foundation and plinth.

Rigid & smooth centering , Shuttering for RCC Work including false work & dismantling them after casting including cost of materials complete in respect as per direction of EIC.

(i) For landing, slabs, chajjas etc.

(ii) For foundation, plinth bend, footings, fencing

M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods,binding wire 18 to 20 gauge.

Dismantling G.C.I. or A.C. Sheet roofing after carefully removing the bolts and nuts including stacking of he materials for reuse and removing the debris within 50m lead. per 1 sqm.

Supplying, fitting & fixing 0.5mm TCT TATA blue scope sheet, 240 Mpa yield strength mix anticorrosive steel with plain formed ridges, gutters, flashing etc.(as same materials as above) having total girth upto 600mm and standard length of 6000mm as required and quoted with hot dip zinc alloy of 120 gms per sqm mass of coating (total both sides) as per IS 277 and finished with polyster coating (EPG 10) of 18-20 microns in approved colour over primer coat of 5 microns on top and 5-7 microns of service coat in grey colour over primer on back, having KLT CRIL HISPAN profile of overall width of 1060mm and laid width of 1000mm, with five crests of 35+1mm spaced at 250+2 mm centers and with three small corrrugations of 8mm depth continously spread over 55mm width each valley of the sheet on steel structures complete with necesssary self drilling and self trapping screws/bolts and nuts, neoprine and limplet washers with 150mm end laps wherever required. The rate shall include alll costs towards materials transport, storage, handling, liftinig , positioning, fixing and all labour. Measurement shall be made on "as laid" area . Sheets shall be supported with coil manufacture's test certificate for strength.

Supply and fixing of M.S grills in position made of MS 25x5mm and applying priming coat of approved steel primer etc complete as per direction of Engineeer .(as per market rate)

(i) Labour charges

(ii) Material cost

Providing vitrified tile flooring using double charge full body vitrified tiles of premium grade having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured / printed series (homogeneous) of approved quality, colour of Somany Royale series / RAK gold plus series / Asian Aerosia series / Johnson or equivalent in all floors and dados at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.

Dismantling and removing 2.5cm. thick artificial stone flooring including stacking the usefull materials for reuse and removing the debries within 50mtr lead.

Removing old lime or cement plaster from walls including racking out joints 12mm. deep and removing the debries within 50mtr lead.

Supply &Fixing of Ceramic floor tiles in (Johnson/Bell Make) (Anti Skid) of premium grade having thickness 7 to 8 mm confirming to IS 13755 of size 300mmx300mm/ 400x400mm coloured in floors ,treads or steps and landingon 25mm thick bed of cement mortar 1:1(1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.

Supply & Fixing wall Tiles having thick ness of 6.5 to 6.7 mm confirming to IS 13753 (Johnson/Bell Make) in dados skirting and risers of steps on 12 mm cement plaster (1:3) (1cement : 3sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.per 1 sqm

supply and fixing M.S. panelled door double leaved shuter with M.S frame . Overall size including frame 1980mm(H) x 760mm (W)made out of following materials confirming to relevant indian standard specifications. Frame :-35mmx35mmx6mm M.S angle, shutter style : -top & bottom rail 25x25x3mm M.s angle, door panel:- 1.0 mm C.R sheet panel stiffener covering width of each leaf:- 19x5mm, m.s flat 3 nos on each leaf, hinges size 100mm- 6nos (3 nos on each side) bought as per ISS. hold fast 35x35x6mm m.s ange 175mm length bifurcated at the tip 3 nos on each side. handle 19x5mm m.s flat fabricated 4 nos aldrop 2ns bought out as per ISS tower bolt 2 nos bought out as per ISS. Approximate -52kg

Supplying all materials,labour and T&P for fixing wash down water closet (commodo) with integral "S" or "P" trap tothe floor with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification.[3.3.2./334] (including cost of closet and its all accesssories )

Supplying all materials,labour and T&P for fixing 12.5 ltr capacity high level cistern with a pair of cast iron or M.S. brackets complete with fitting such as siphonic arrangement,15mm. nominal size brass/PVC ball valve with polythene float chromium plated brass handle, unions and couplings for connection with inlet, outlet and over flow pipes, 32mm.dia. porcelain enamelled flush bend, 12mm. dia. PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and the inlet pipe with supply main etc. all complete as per specification.[3.3.6./337] (including cost of cistern and all accessories. )