Ministry Of Road Transport And Highways Tender

Providing and applying Tack coat with Bitumen Emulsion(Medium Setting) using emulsion pressure distributor at the rate of @ 0.25Kg/sqm on the prepared bituminous /granular surface cleaned with mechanical broom as per Clause No.501.5.2, 502 & 503, Section 900 & other relevant clauses of Specifications for Road and Bridge works of Ministry of Road Transport and Highways (5th Revision) complete in all respect and as per direction of Engineer-in-charge.

Providing and laying 40mm thick bituminous Concrete (Grade-II, 13mm nominal size ) with 60-90 TPH HMP producing an average output of 75 Tonne per hour using crushed aggregates of specified grading, premixed with bitumen CRMB-55 minimum @ 5.4 to 5.6 percent by weight of total mix and filler, transporting the hot mix to work site, laying with Hydrastic Paver Finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compacting as per MoRT&H specification clause to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause No.507, 509 and section No.500 and 900 and other relevant sections/ clauses of specificaiton for road and bridge works of Ministry of Road Transport and Highways (5th Revision) including cost of all materials, labour, T&P, taxes, labour, welfare cess, royalty etc. complete in all respect as per direction of the Engineer-in-charge.

Construction of Shoulders with moorum with all leads and lifts and transporting to site spreding to required slope and compacted to meet the requirement Table-300-2 as per clause of MORTH specification clause No. 509 complete in all respects and direction Engineer-in-Charge.