Military Engineer Services Tender

Demolition of brick or stone / boulders work built in cement mortar including all quins, arches, pillars etc complete all as specified and directed.

Material and labour for Providing and fixing suspended false ceiling, which includes providing and fixing GI ultra perimeter channels of size 0.55 mm thick having one flange of 20 mm and another flange of 30 mm and a web of 27 mm alongwith perimeter of ceiling, screw fixed to brickwall/partition with the help of nylon sleeves and screws, at 610 mm centres. then suspending GI ultra intermidieate channels of size 45 mm , 0.9 mm thick with two flanges of 15 mm each from the soffit at 1220 mm centres with ultra ceiling angle of width 25mmx10mmx0.55 mm thick fixed to soffit with GI cleat and steel expansion fasteners. Ultra ceiling section of 0.55 mm thickness having knurled web of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm are then fixed to the ultra intermidieate channel with the help of connecting clips and in direction perpendicular to the ultra intermidieate channel at 457 mm centres. 12.5 mm tapered edge Gypboard (Confirming to IS-2095-1982) is then screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally the boards are to be jointed and finished so as to have a flush look which includes filling & finishing the tapered and square edges of the boards with jointing conmpound, paper tape and two coats of plastic emulson paint over 3mm thick putty complete all as specified and directed.

S&F 6mm thick AC corugated sheet or semi corrugated sheet fixed with 'L type or J type hooks in roof covering complete all as specified and directed.

S&F 6mm thick Asbestos cement two-piece adjustable plain angular ridge complete all as specified and directed.

S&F 0.63 mm CGI sheet with two corrugated side lap fixed with 'L' type hook as in roof complete all as specified and directed.

S&F 0.63 mm Plain, galvanised, mild steel sheeting in ridges, hips valley gutters sun shed etc complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50-0.53 mm thick of any colour having tensile strength of 550 Mpa with hot dip mettalic coating of aluminium alloy (galvalume 150 gms/sqm total of both sides, AZ 150 of BMT 0.45mm measuring 0.53mm thick with finish coat as per ASTM A-792 or AS 1392) and wall sheet coated with 25 micron thick paint on top and back coating on sheet shall be 10 micron as in roof covering/ridge of roof/ cladding to wall, fixed with self tapping screwes as specified and also surface should be dust free (alloy of 55% aluminium, 43.5% zinc,1.5% silicon) complete all as specified and directed. MAKE: TATA BLUESCOPE STEEL Colorbond XRW steel OR as make mentioned in PS (Life prior to corrosion to perforation by weathering in the natural elements of 20 years from date of manufracturer)

M&L brick work with sub class 'B' bricks (old size bricks) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for MS work in Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.Fe-410-W(Gde-E-250) quality-B complete all as specified and directed.

M&L for MS angle, flat etc in wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for prepraration of new surfaces of mild steel /iron of any description priming with red oxide primer exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster on brick walls/ concrete surface, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L 20 mm thick cement plaster in CM (1:4) in two layers (8mm thick with approved water proofing compound @2% by weight of cement or as per manufacturers instruction over backing layer of 12 mm thick )on fair faces of brick work incl finished even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately as supply only)

Supply only integral water proofing compound complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surfaces including necessary preparation work complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.