Military Engineer Services Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_677644_1Bid Award Id
ViewTender No
8000/049/2024-25/0948/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
M&L for complete removal of existing treatment and applying two coats of walls with distemper oil emulsion white or tinted over alkali resistant primer including 3 mm thick wall care putty complete all as specified and as directed.
100
-
-
M&L for preparation of old decorated plastered or unplastered surfaces of wall cornices etc by brooming down or steel wire brushing, scraping down, the surfaces covered by smoke soot, growth of moulds and moos, efflorescent, having oil and gresase spots and applying one coat of cement base paint (white or tinted) complete all as specified and as directed
300
-
-
M&L for complete removal of existing treatment on wall including removal of vegetation and apply finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade in two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.
400
-
-
M&L for Preparation of old painted surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
100
-
-
M&L for Preparation of new or untreated surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed.
50
-
-
M&L for Preparation of old painted surfaces of steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying one coat of synthetic enamel paint complete all as specified and directed
50
-
-
Taking down the Chowkhats or frames not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and as directed
2
-
-
Taking down the Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each (without taking off shutters from the frames) complete all as specified and as directed
4
-
-
S&F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing in SSR Part II 2010 complete all as specified and as directed
9.8
-
-
S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 complete all as specified and as directed
2.73
-
-
M&L PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) as in hold fast and filling of steel chowkhat etc. complete all as specified and directed
0.3
-
-
S&F for mild steel flat iron as in hold fast 25x6 mm confirming to Fe290 Gde E-165 complete all as specified and directed
15
-
-
S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.
4
-
-
S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed
6
-
-
S&F Aluminium Handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and as directed.
4
-
-
Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed
1.13
-
-
M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed
20
-
-
Dismantling of water tank Capacity exc 500 not exc 1000 Ltrs and removing to store complete all as specified and as directed
2
-
-
Hoisting and Fixing of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position specified in SSR Part I complete all as specified and as directed.
2
-
-
S&F for 20 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
2
-
-
S&F in repairs for 20 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
5
-
-
S&F in repairs for 25 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
5
-
-
S&F for Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device
2
-
-
S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed
5
-
-
S&F in repairs PVC low level flushing cistern 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe and flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and directed
2
-
-
S&F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.
1
-
-
S&F in repairs 15 mm bore dia cast copper alloy fancy type, chromium plated stop valves, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
2
-
-
S&F in repairs 20 mm bore dia cast copper alloy fancy type, chromium plated stop valves, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
2
-
-
S&F in repairs 15mm stop valves (concealed type), cast copper alloy fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
2
-
-
S&F in repairs 20mm stop valves (concealed type), fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
3
-
-
S&F in repair pillar taps of size 15mm, chromium plated fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.
1
-
-
S&F in repairs for bib taps fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore in repair complete all as specified and as directed.
5
-
-
S&F in repairs for Brass chromium plated shower rose 125 mm size fixing to steel pipe or union complete all as specified and as directed
2
-
-
S&F in repairs PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement including disconnection of old existing trap, and connected with existing water pipe complete all as specified and directed.
2
-
-
S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.
2
-
-
S&F for Aluminium (Extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
2
-
-
M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
100
-
-
M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement Mortar in 1:4 using water proofing compound in top layer (Water Proofing Compound measured separately) and finished even and smooth (without using extra lime or cement) complete all as specified and directed.
50
-
-
M&L for rendering 10 mm thick internal wall on fair faces of brick work or concrete surfaces in cement Mortar in 1:6 and finished even and smooth (without using extra lime or cement)complete all as specified and directed.
30
-
-
M&L for rendering 5 mm thick on ceiling in cement mortar 1:3 finished even & smooth without using extra cement complete all as specified and directed
20
-
-
Supply only Liquid water proofing compound for external wall plastering (for 5 mm thick plastering) complete all as specified and directed
2
-
-
M&L for preparation of new plastered surface of walls etc and applying two coats of cement base paint over alkali resistant priming paint including complete all as specified and directed
50
-
-
M&L for preparation of new plastered surface of walls etc and applying two coats of distempering interior walls with distemper oil emulsion white or tinted over chalk whiting complete all as specified and directed
30
-
-
M&L for preparation of new plastered surface of ceiling etc and applying three coats of white wash complete all as specified and directed
20
-
-
S&F for mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
50
-
-
S&F in repair Parryware casecade health faucet hose and hook complete all as specified and directed. (Cat Part No T-9937A1) complete all as specified and directed.
2
-
-
S&F in repair 15mm dia Angle Stop Cock with wall flange all as specified and directed. (Cat Part No G1807A1) complete all as specified and as directed.
1
-
-
S&F for anodised aluminium three track sliding window frame work fabricated by using medium grade, Jindal Make box sections as per drgs. Window/partition panels shall be 5.5mm thick plain select quality glass panes inserts, fixed with aluminium anodises glazings clips and rubber beading including all standard accessories, aluminium alloy wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks and aluminium deco grill (DG 201 @5.358 Kg/Sqm) complete all as specified and as directed.
1.44
-
-
S&F for anodised aluminium door shutter frame work fabricated by using medium grade, Jindal Make box sections as per drgs. Door/partition panels shall be 8 mm thick plain select quality glass panes inserts, fixed with aluminium anodises glazings clips and rubber beading including all standard accessories. etc complete.
1.95
-
-
Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed
8.3
-
-
M&L Brick work with modular fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed
6
-
-
M&L for Brick work with modular fly ash bricks straight or curved on plan to any in half brick thiick walls radius built in CM 1:4 complete all as specified and as directed
20
-
-
M&L for Providing precast cement concrete manhole covers, Type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 complete all as specified and as directed
1.5
-
-
M&L for Mild steel TMT bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
200
-
-
M&L for Cement concrete Type D2 1:4:8 (40 mm graded aggregates) in foundations, filling and mass concrete complete all as specified and as directed.
1.5
-
-
Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc
1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.
4
-
-
Returning, filling in, including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and as directed.
2.5
-
-
Removing Excavated material not exceeding 50M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.
1.5
-
-
M&L for PCC in 1:2:4 Type B0 ( 12.5 mm graded aggregate) asin lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs,, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, filling of pressed steel door frames complete all as specified and directed.
0.2
-
-
M&L for PCC 1:3:6 Type C2 (40 mm graded aggregate) in surface channels and drains complete all as specified and as directed.
0.5
-
-
Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter of flat rough finished surfaces of concrete complete all as specified and as directed.
10
-
-
M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass complete all as specified and as directed.
1
-
-
Use and waste Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc rough finished flat surface of concrete complete all as specified and as directed.
20
-
-
M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Columns, pillars, piers, posts and struts complete all as specified and as directed.
1.5
-
-
S&F for Joist, channel, angle, or tee sections of Fe 290 (Gde E-165) fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed.
200
-
-
S&F for struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. conforming to Fe-290 Gde E-165
10
-
-
S&F in repairs galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed.
1
-
-
S&F in repairs110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed
40
-
-
S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed
20
-
-
S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed
20
-
-
S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed
10
-
-
S&F for 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed
3
-
-
S&F for 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed
3
-
-
S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed
5
-
-
S&F for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed
5
-
-
S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed
5
-
-
S&F for 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed
5
-
-
S&F for PVC (SWR) cowl of 110 mm dia complete all as specified and as directed..
2
-
-
S&F for Stack clamps for 110 mm bore pipe, out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof
10
-
-
M&L for Reinforced concrete pipe 150mm bore class NP2 laid and jointed complete with collars complete all as specified and as directed.
20
-
-
M&L for cement concrete 1:4:8 type D-2 bed to 150 mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed.
20
-
-
Demolition and breaking up 150 mm dia pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.
20
-
-
S&F for rolled mild steel in steel work tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.
500
-
-
M&L for preparaton of new or previously untreated steel surfaces of any description over 10cm width or girth not otherwise described as directed and apply two coats of synthetic enamel paint over red oxide complete all as specified and as directed.
100
-
-
Renewing cement concrete tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and as directed.
22
-
-
Material, T&P and labour for cleaning of manhole using the cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 and removing blockage if any and removing night soil / silted sludge / waste material outside MD land unprohibited by any authority and following the statutory law / guidelines complete all as specified and as directed.
50
-
-
M&L for removing sludge from septic tanks using the cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 including removal of sludge water mechanically and dispose night soil / silted sludge / waste material outside MD land unprohibited by any authority and following the statutory law / guidelines as per Rule 5 and protective gear and safety devices complete all as specified and as directed.
20
-
-
Material, T&P and labour for cleaning of gully traps, Nahni traps, chamber etc using the cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 and removing blockage if any and dispose night soil / silted sludge / waste material outside MD land unprohibited by any authority and following the statutory law / guidelines complete all as specified and as directed.
24
-
-
M&L for cleaning of sewage line of any size of dia bore with cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 and dispose of the night soil/sludge outside MD land unprohibited by any authority and following the statutory law / guidelines as per Rule 5 and protective gear and safety devices complete all as specified and as directed.
200
-
-
M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.
350
-
-
M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.
550
-
-
M&L for preparing old plastered surfaces of walls by washing, rubbing down and scraping of existing distempering/painted surfaces etc and applying one coat of distemper oil emulsion complete all as specified and as directed.
2000
-
-
M&L for complete removal of existing treatment and applying two coats of walls with distemper oil emulsion white or tinted over alkali resistant primer including 3 mm thick wall care putty complete all as specified and as directed.
1000
-
-
M&L for preparation of old decorated plastered or unplastered surfaces of wall cornices etc by brooming down or steel wire brushing, scraping down, the surfaces covered by smoke soot, growth of moulds and moos, efflorescent, having oil and gresase spots and applying one coat of cement base paint (white or tinted) complete all as specified and as directed
1500
-
-
M&L for complete removal of existing treatment on walls and applying two coats cement base paint complete all as specified and as directed.
500
-
-
M&L for complete removal of existing treatment on wall including removal of vegetation and apply finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade in two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.
1800
-
-
M&L for Preparation of old painted surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
160
-
-
M&L for Preparation of old painted surfaces of steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying one coat of synthetic enamel paint complete all as specified and directed
70
-
-
M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
240
-
-
M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement Mortar in 1:4 using water proofing compound in top layer (Water Proofing Compound measured separately) and finished even and smooth (without using extra lime or cement) complete all as specified and directed.
140
-
-
M&L for rendering 10 mm thick internal wall on fair faces of brick work or concrete surfaces in cement Mortar in 1:6 and finished even and smooth (without using extra lime or cement)complete all as specified and directed.
75
-
-
M&L for rendering 5 mm thick on ceiling in cement mortar 1:3 finished even & smooth without using extra cement complete all as specified and directed
25
-
-
Supply only Liquid water proofing compound for external wall plastering (for 5 mm thick plastering) complete all as specified and directed
2
-
-
M&L for preparation of new plastered surface of walls etc and applying two coats of cement base paint over alkali resistant priming paint including complete all as specified and directed
140
-
-
M&L for preparation of new plastered surface of walls etc and applying two coats of distempering interior walls with distemper oil emulsion white or tinted over chalk whiting complete all as specified and directed
75
-
-
M&L for preparation of new plastered surface of ceiling etc and applying three coats of white wash complete all as specified and directed
25
-
-
M&L for complete removal of existing treatment by scrapping with machnical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.
250
-
-
M&L for one coat of acrylic water based exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.
250
-
-
M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed.
Note :- The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.
250
-
-
Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed
22.3
-
-
M&L Brick work with modular fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed
20
-
-
M&L for Brick work with modular fly ash bricks straight or curved on plan to any in half brick thiick walls radius built in CM 1:4 complete all as specified and as directed
50
-
-
M&L for Providing precast cement concrete manhole covers, Type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 complete all as specified and as directed
5
-
-
M&L for Mild steel TMT bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
800
-
-
M&L for chequered cement concrete tiles 25cmX25cmX25mm thick, set, joined and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.
50
-
-
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed.
100
-
-
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
7.5
-
-
M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in subbase of floor etc complete all as specified and as directed.
150
-
-
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
45
-
-
Surface dressing not exceeding 15 Cm deep and getting out in Soft/ Loose soil complete all as specified and as directed.
150
-
-
M&L for Cement concrete Type D2 1:4:8 (40 mm graded aggregates) in foundations, filling and mass concrete complete all as specified and as directed.
3
-
-
Renewing cement concrete tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and as directed.
50
-
-
Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc
1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.
10
-
-
Returning, filling in, including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and as directed.
6.5
-
-
Removing Excavated material not exceeding 50M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.
3.5
-
-
M&L for PCC in 1:2:4 Type B0 ( 12.5 mm graded aggregate) asin lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs,, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, filling of pressed steel door frames complete all as specified and directed.
0.5
-
-
M&L for PCC 1:3:6 Type C2 (40 mm graded aggregate) in surface channels and drains complete all as specified and as directed.
1.8
-
-
Excavating in post holes (or similar holes) each n exc 0.5 cum in soft soil/loose soil and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surfacecomplete all as specified and as directed.
10
-
-
S&F for Joist, channel, angle, or tee sections of Fe 290 (Gde E-165) fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed.
250
-
-
S&F for struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. conforming to Fe-290 Gde E-165
50
-
-
Supply only Chain link MS galvanisd fencing 4 mm dia and 100 mm x 100 mm size mesh complete all as specified and as directed.
135
-
-
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire
54
-
-
M&L for Mild steel round bars Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
79.92
-
-
S&F for Mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 10 cm long complete all as specified and as directed.
5
-
-
S&F in repairs galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed.
1.5
-
-
Dismantling fencing wiremesh, any type, any size complete all as specified and as directed.
54
-
-
S&F in repairs110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed
60
-
-
S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed
20
-
-
S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed
30
-
-
S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed
20
-
-
S&F for 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed
3
-
-
S&F for 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed
3
-
-
S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed
5
-
-
S&F for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed
5
-
-
S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed
10
-
-
S&F for 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed
10
-
-
S&F for PVC (SWR) cowl of 110 mm dia complete all as specified and as directed..
2
-
-
S&F for Stack clamps for 110 mm bore pipe, out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof
15
-
-
M&L for hardcore of broken stone or boulders guage n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
22.5
-
-
M&L for Reinforced concrete pipe 150mm bore class NP2 laid and jointed complete with collars complete all as specified and as directed.
50
-
-
M&L for cement concrete 1:4:8 type D-2 bed to 150 mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed.
50
-
-
Demolition and breaking up 150 mm dia pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.
50
-
-
S&F for rolled mild steel in steel work tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.
300
-
-
M&L for preparaton of new or previously untreated steel surfaces of any description over 10cm width or girth not otherwise described as directed and apply two coats of synthetic enamel paint over red oxide complete all as specified and as directed.
60
-
-
S&F for concertina coils super barbed bladed profile of dia 600 mm of and weight of coil per 50 spiral turns shall not be less than 9.0 kg and one coil (50 spiral) shall not be stretched to more than 6.0 mtr. Blade shall be 0.50mm thick galvanised steel strip and 2.5 mm dia core wire fixed to angle iron brackets or masonry surfaces with necessary accessories like straining wires, fixing clips etc completed all as specified and as directed.
70
-
-
Material, T&P and labour for cleaning of manhole using the cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 and removing blockage if any and removing night soil / silted sludge / waste material outside MD land unprohibited by any authority and following the statutory law / guidelines complete all as specified and as directed.
450
-
-
M&L for removing sludge from septic tanks using the cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 including removal of sludge water mechanically and dispose night soil / silted sludge / waste material outside MD land unprohibited by any authority and following the statutory law / guidelines as per Rule 5 and protective gear and safety devices complete all as specified and as directed.
180
-
-
Material, T&P and labour for cleaning of gully traps, Nahni traps, chamber etc using the cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 and removing blockage if any and dispose night soil / silted sludge / waste material outside MD land unprohibited by any authority and following the statutory law / guidelines complete all as specified and as directed.
85
-
-
M&L for cleaning of sewage line of any size of dia bore with cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 and dispose of the night soil/sludge outside MD land unprohibited by any authority and following the statutory law / guidelines as per Rule 5 and protective gear and safety devices complete all as specified and as directed.
650
-
-
Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC casing caping with 6 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed. Note : two run 6sqmm and one run of earth wire 6 sqmm and PVC conduit will be measured as one length.
60
-
-
Supply and fix Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral12 way (Double door) with 200 amp rated bus bar all as specified and directed.
5
-
-
Supply and fix Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 8 way (Double door) with 200 amp rated bus bar all as specified and directed.
5
-
-
Supply and fix Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 4 way (Double door) with 200 amp rated bus bar all as specified and directed.
4
-
-
S&F Isolator DP 40A, 240 volts all as specified and directed by Engr-in-Charge.
14
-
-
S&F MCB SP up to 40 Amp, 240 volt all as directed.
88
-
-
Material and labour for PVC rectangular block of size 25 cmx20cmx5cm depth, closed recessed 3mm thick plastic laminated sheet complete all as specified
14
-
-
S & F LED light fitting 1 x 10 Watt T5 Alumnium batten type, indoor decorative PC housing extruded T5 Al LED battens with extruded aluminium housing and integrated LED driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size incl taking down the old USNV complete all as specified and directed
45
-
-
S &F Energy efficient LED integrated batten suitable for indoor applications tube light fitting 1x20 Watt 4 FT complete all as specified and directed.
200
-
-
Supply and fixing 5 star rating Ceiling Fan 1200 mm sweep with blade, down rod complete all as specified and directed.
50
-
-
Supply and fixing exhaust fan 300 mm sweep, 1400 RPM with louver complete all as specified and directed.
10
-
-
Supply only Oil filled capacitor of 2.5 MFD, 240 Volt suitable for ceilling/ exhaust fan complete all as specified and directed. Make : Universal/ Usha/Electro
75
-
-
S&F modular switch single pole 1 way 6A, complete Including taking down unserviceable switch all as specified and directed. Make : Crabtree/CONA/Havells.
10
-
-
S&F modular socket outlet 6A 2/3 pin combined 2 module complete Including taking down unserviceable socket all as specified and directed. Make : Crabtree/CONA/Havells
10
-
-
S&F modular switch 16A single pole one way complete Including taking down unserviceable switch all as specified and directed. Make : Crabtree/Cona/Havells.
10
-
-
S&F socket outlet 6A/16A- 2/3 pin combined 2 module complete all as specified and directed. Make : Crabtree/Cona/Havells.
10
-
-
M&L for modular Bell push Switch single pole one way 6A/10Amps complete Including taking down unserviceable ones all as specified and directed. Make : Crabtree/Cona/Havells.
10
-
-
M&L for call bell modular type AC 230 volt single pole complete Including taking down unserviceable ones all as specified and directed. Make : Crabtree/Cona/Havells.
5
-
-
M&L for fan step regulator, 120, W-2 module complete Including taking down unserviceable ones all as specified and directed. Make : Crabtree/Cona/Havells.
5
-
-
M&L for taking down ceiling fan & Exhaust fan of any make and any size for repair/replacement of defective spare parts and overhauling the fans by cleaning, greasing and replacement of old split pin, rubber reel, connected items and provide flexible wire of size 23/0.0076 for connection from ceiling rose to fan/exhaust fan, refixing the same and testing complete all as specified and directed. Note:- Rewinding, painting and supply of new components will be measured and paid separately under relevant items complete all as specified and directed.
60
-
-
M&L for rewinding the ceiling fan any make 1200/1400mm sweep and any size with super quality copper conductor adequate winding wire of existing size complete all as specified and directed.
60
-
-
M&L for rewinding the exhaust fan any make 300/450mm sweep any size with super quality copper conductor adequate size of winding wire of existing size, refixing the ball bearing, greasing complete all as specified and directed .
20
-
-
Supply only ball bearing of suitable size for ceilling fans any make, type and size complete all as specified and directed. Make : SKF /TATA /NBC
80
-
-
Supply and fix LED Lamp pin type 9 watt all as specified and directed by the Engineer-In-charge.
50
-
-
Taking down from existing location and refixng after maintenance and servicing of window type / split type AC of capacity 1.5/2 TR by cleaning condensing coil, cooling unit, blower motor, oiling & greasing of moving parts and testing by soap solution, brush and air blower, tightening nuts, bolts screws and general check-up (Electrical system) of complete unit complete all as specified and directed.
6
-
-
Dismantling the UNSV compressor from 1.5 ton capacity window/ split AC, excluding copper tubing , replace by S&F of same capacity new compressor (replacement basis and also site requirement suitable for invertor type OD unit) with first filling refrigerat gas and fixing on position with nuts, bolts, rubber grommet and washers, connecting copper tubing by welding/ flare nuts complete all as specified and directed.
1
-
-
S&F in replacement starting capacitor 80-100 MFD suitable for 1.5/2.0 ton air conditioner complete all as specified and directed. Make :SARADA/KEIL/KELTRON/ ORICAP
4
-
-
S&F in replacement starting relay assembly including coat & cover and clips suitable for AC 1.5/2.0 ton window/ spilt type air conditioner complete all as specified and directed Make : TECHNOMECH/KELTRON) .
2
-
-
S&F in replacement blower motor suitable for 1.5 ton window type AC, single phase 230 Volts with replacement of bushes including testing and commissioning complete all as specified and directed.
3
-
-
S&F in replacement air filter pad suitable for any type AC 1.5/2.0 ton capacity complete all as specified and directed.
4
-
-
Carrying out pressure leak test for detecting leak in condensing unit, refrigerant pipe and repairing the leak by welding or brazing of condensing unit and refrigerant pipe, putting under pressure for leak checking after repairs for 72 hours of leak pipe including transporting & carrying out T&P required at site for work of 1.5/2.0 ton capacity any type of AC complete all as specified and directed.
4
-
-
Flushing out by N-2 and CTC, vaccination and supply & charging of refrigerant gas into the system for 1.5 / 2.0 ton capacity any type AC complete all as specified and directed. NOTE: Cost of Strainer & 0.60 size cappliary incuded in the rate
2
-
-
Dismantling of defective cooling indoor unit of 1.5/2 TR capacity split AC complete with connected piping and corded remote control etc & re-fixing on wall/floor after carrying out repairs and servicing and making good the disturbed surfaces as per the existing complete all as specified and directed.
3
-
-
Dismantling of defective condensing unit of 1.5/2 TR capacity split AC complete with connected lead and iron stand etc and re-fixing on roof/floor after necessary repairs and servicing complete all as specified and directed.
2
-
-
S&F in replacement suction copper pipe line heavy ½” dia with foam insulation and flair nuts from indoor to out door unit of split type AC 2.0 TR capacity complete all as specified and directed.
15
-
-
All as per item No. 197 above but discharge copper pipe line heavy duty 3/8” dia.
15
-
-
Dismantling the UNSV defective indoor unit of 1.5 TR capacity split type AC, S&F indoor unit of same capacity of any make with blower motor, front grill and connecting the copper tubing by brazing detecting leak and rectifying the same and installing the same complete all as specified and directed.
1
-
-
Dismantling the UNSV outdoor unit of 1.5 TR capacity split type AC, S&F outdoor unit of same capacity of any make fitted with condensing unit and motor but with compressor and install the same by charging refrigerant gas complete all as specified and directed.
1
-
-
S&F single pole and neutral enclosure with a two pin and earth plug socket 240 volt with one MCB DP ‘C’ series rating 20 to 32 Amp incl taking down the old USNV complete all as specified and directed. Make: C&S/Polycab/Havells.
4
-
-
Supply and install hi wall split unit indoor and outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better in door air quailty with minium 5 star and EER 3.2 of capacity 1.5 ton including connecting and testing complete allas specified and as directed by Engr-in-charge.
2
-
-
S&F automatic Voltage stebliser single phase,50 HZ ,230 volts +/- 5% ,90 to 250 rating 4KVA complete for 1.5TR AC all as specified and directed.make:V-guard/Shakti or equivelent
2
-
-
S&F Electric water heater storage type(Geysers) of capacity 25 ltrs complete with fitting and fixtures five star rating metal body complete all as specified and directed.
Make : Bajaj/Havells
3
-
-
Supply ,installation commissioning of water cooler partially stainless steel electric driven single phase having approx storage capacity of 80 ltrs and nominal cooling capacity of 40 ltrs per hour. Make : Voltas/Blue star
1
-
-
Removing the UNSV water purifier from its position and opening the purifier, cleaning the same and replacement of the damage parts like new candle, 3 in 1 cartridge set and assembling the same after testing and fitting complete all as specified and directed.
2
-
-
Check U/S AC cordless remote controlled hand set and supply and replace new hand set as existing make complete all as specified and directed
2
-
-
Supply and replacement heating unit (element) ISI marked of 1500 watts triangular/circuler shape or as per sample required in existing geysers installed at site including rubber washers complete all as specified and directed.
Make : Umpire/Wondercool/Ditz/ Toshiba
4
-
-
Supply and replacement thermostat range 0°-75°C for the geysers of 25 to 35 litres as per sample required in existing geysers installed at site complete, all as specified and directed.
5
-
-
Supply and replacement PVC threaded tough rubber flexible pipe/tubing of 15 mm size with PTMT nuts at both end 300/450 mm long for geysers inlet/ outlet connections, all as specified.
5
-
-
Supply and replacement LED Indicator lamp rectangular/round type as required at site all as specified and directed.
2
-
-
S&F in replacement motor for water fiiter any make/size as per sample all as specified and directed.
2
-
-
S&F in replacement adopter for water fiiter any make/size as per sample all as specified and directed.
2
-
-
Dismantling of water cooler of 40-80 ltrs storage capacity from its position, taking out water from its water tank cleaning of water tank by washing powder and with fresh water externally and internally and storage tank without disturbing the existing position and connecting the water line including GI fitting when required and PVC pipe connection complete all as specified and directed by the Engr-in-Charge.
3
-
-
Dismantling of UNSV old defective & burnt compressor for 40/80 ltrs capacity of water cooler including disconnecting suction / discharge copper tubing replacing by S&F new compressor and fixing on position with nuts, bolts, rubber gromote and washers, connecting copper tubing by welding / flame nuts, detecting leak and repairs if any, complete all as specified and directed.
2
-
-
Taking out defective gasket of storage water cooler top cover and supply & fixing new rubber gasket of existing size all as specified and directed by Engr-in-Charge.
2
-
-
S & F (in replacement) condensing coil suitable for 40-80 ltrs capacity water cooler of any make all as specified and directed.
2
-
-
Dismantling of defective starting capacitor S&F new capacitor 60 - 80 Mfd complete all as specified and directed. Make : SARADA / KELTRON / ORICAP
2
-
-
S&F in replacement capacitor 4 Mfd suitable for blower motor of water cooler complete all as specified and directed. (Make : SARADA / KELTRON / ORICAP)
10
-
-
S&F (in replacement) thermostat suitable for water cooler any capacity all as specified and directed. (Make : ROCKWELL/INDFOSS)
2
-
-
S&F (in replacement) push/lift type self closing taps suitable for water cooler all as specified and directed.
2
-
-
S&F (in replacement) PVC float valve assembly with ball suitable for 15 mm bore pipe of water cooler all as specified and directed.
2
-
-
Supply and replacement of compressor including disconnecting suction/ discharge copper tubing of water cooler including taking out old unsv and fixing on position with nuts, bolts, rubber gromote and washers, connecting copper tubing by welding/flame nuts, detecting leak and repairs if any, complete all as specified and directed by Engr-in-Charge
2
-
-
Carrying out pressure leak test by nitrogen pressure for detecting leak in condensing unit, refrigerant pipe and repairing the leakage by welding or brazing of condensing unit refrigerant pipe, putting under pressure for leak checking after repairs of leak pipe including transporting & carrying out T&P required at site for work of water cooler all as specified and directed.
2
-
-
Flushing out by Nitrogen and CTC, vacuum and supply charging of refrigerant gas as existing into the system for water cooler all as specified & directed.
2
-
-
Removing defective condensing fan motor of water cooler single phase 230 V 50 HZ and opening and replacing of Blower motor and cutting out the burnt wiring and cleaning the slots of rotor and rewinding of the same with the existing size of super enamelled copper winding wire including insulation, varnishing, greasing, replacement of bushes, reassembling including testing and commissioning all as directed.
3
-
-
S&F water pump for desert cooler any make and size as per sample all as specified and directed.
4
-
-
S&F selecter switch with knob for desert cooler any make and size as per sample all as specified and directed.
5
-
-
S&F cooling pad (benature/PVC ), (set of 3) for desert cooler any make and size as per sample all as specified and directed.
3
-
-
S&F capacitor 3.5 mfd all as specified and directed.
4
-
-
Supply and fixing desert cooler electric driven (single phase), plastic/PVC body having nominal air flow capacity of 5000 Cum per hour (or nearest size complete all as specified and directed.
Make : LG/Bajaj
2
-
-
Excavation in trenches in hard/dense soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting GI/CI pipe line on cable trench complete all as specified and directed.
65
-
-
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.
58
-
-
Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
7
-
-
Taking Down unserviceable GI/PPR pipes and S&F 3-layer PP-R polypropylene random copolymer concealed pipe (PN 16/SDR 7.4) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings, floors or in trenches etc of size 63 mm OD complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C
170
-
-
All as per Item No. 235 above but of size 32 mm OD.
340
-
-
All as per Item No. 235 above but of size 25 mm OD.
190
-
-
S&F in repair of PP-R gate valves(brass inlet) as per requirement of size 63 mm OD complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C
4
-
-
All as per Item No. 238 above but 32 mm OD.
15
-
-
All as per Item No .238 above but 25 mm OD.
10
-
-
Supply only (Calcium based granular disinfectant for chlorination for water treatment, in Bbsr under AGE E/M GOS, GE (I) GOS in plastic drums fof 45 kg/each drum. Make : Aquafit or equivalent as approved by E-in-Cs Branch.
6
-
-
Supply only alum crystal for water sedimentation complete all as specified and approved by GE.
100
-
-
Cleaning of over head water storage tank of capacity 20000 gallons by dewatering existing water and removing all dirt silt vegetation formation on side walls/staire inside and bottom cleaning with wire brush to remove settled materials and cleaning with clean water and applying lime washing two coats inside the tank including re-writing the date of cleaning capacity of the tank/sump with synthetic enamel white paint on black base complete (ii) Cleaning the surrounding area of the reservior to a distance of 2 mtrs circumferance including cutting of grass digging out roots filling holes and levelling around and removing waster materials to a distance not exceeding 20 mtrs complete and all as directed.
2
-
-
All as per item No 243 above but of capacity 10000 gallons UG sump complete all as specified and directed
1
-
-
Flushing the bore well for flushing of silt, fine sand etc by air compressor of suitable capacity and pumping out turbidity till obtaining clear water all as directed and as per site requirement.
1
-
-
S&F foot valve 50/63 mm dia CI/GI with complete fittings including taking out old unsv complete all as specified and directed.
1
-
-
M & L for carry out water quality anyalsis for bacterial ,chemical and biological analysis including for collection ofwater samples from the Tube well and testing from Govtapproved testing laboratory , submitting of report fromminium following parameters. (a) Turbudity (NTU) (b) pH (c) Total Hardness as CsCO2(mg/l) (e) Iron as Fe(mg/l) (f)Magnesium as Mg (mg/l) (g) E-coli or thermotolerantcoliform bacteria (h) from any NABL accredited lab.Notes: 1. Saperate water samples should be collected &tested from borewell. 2. No payment shall be made to contractortill submission of water test every two month report for the watersamples of pump house all as specified and directed.
4
-
-
Supply and fixing and testing CI sluice valves 100mm bore of dia both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostatic pressure 15 Kg/Sqcm. (PN 1.6) and confirming to IS 780 complete and of size 100mm dia. Make: Kirloskar/Zoloto/BIR
2
-
-
All as per Item 248 above but of size 80mm dia
2
-
-
Supply and fixing 3 core copper submersible flat cable 10 Sqmm size, 1100 volts gradeIncluding taking down unserviceable burnt cable all as directed and specified by Engr-in-charge. Make : Polycab or equivalent in Havells/HPL/KSB
40
-
-
Supply and fixing in repairs modular switch 1 way,16Amps,1module,240V, ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements