Military Engineer Services Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 4,62,500Document Cost
₹ 2,000Tender Fee
Refer Documents
Summary
752752 Addn Altn Of Md Accn At Gopalpur
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_MES_367327_2Bid Award Id
ViewTender No
752752Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Item No 3 :- Dismantling of floor, walls, roof tiles including bedding (but not backing ) and rubbish of permises all as specified.
1290
-
-
Item No 04 : Demolition of reinforcement cement concrete above the ground floors n exc 15cm thicness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc
5.9
-
-
Item No 05 : M&L for post construction Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed.
1165
-
-
Item No 06 : M&L for treatment of soil using emuision for post construction Anti termite treatment along external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc. in plinth protection or apron complete all as specified and directed.
785
-
-
Item No 07 : M&L for post construction Anti termite treatment at point of contact of wood work by chemical emulsion (in oil or Kerosene based solution) @ 0.50 litre / hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.
1716
-
-
Item No 08 : M&L ATT for Switch boards including removing the cover carefully and inserting adequate amount of chemical (powder) and closing the cover.
660
-
-
Item No 9 - M&L for 10 mm thick Double chargred Light shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement of match complete.
250
-
-
Item No 10 - M&L for 10 mm thick Double chargred Dark shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement of match complete.
30
-
-
Item No 11 :- M&L for non skid joint free ceramic coloured tiles of 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles (design as approved by GE) complete all as specified and directed.
2300
-
-
Item No 12 :- M&L for joint free non skid ceramic ceramic coloured tiles 7 to 8 mm thick Sqiare / rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed with wjite or coloured cement to match complete all as specified and directed.
230
-
-
Item No 13 :- M&L for joint free ceramic coloured tiles 7 to 8 mm thick Sqiare / rectangular) area of each tile exceeding 0.18 sqm and not exceeding 0.38 sqm in vertical surface such as skirtings, dados etc, set and jointed in neat cement slurry and pointed set & joint in neat cement slurry and pointed with white or coloured cement over & including 10mm thick 1.6 cement plaster complete.
410
-
-
Item No 14 : M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finished in CM 1:6 for laying of floor tiles as directed.
2810
-
-
Item No. 15 - M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.
150
-
-
Item No. 16 :- M&L Machine cut Kota stone slab flooring 18-20 mm thick as in riser, steps & skirting over cement mortar laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab incl rubbing polishing & rounding to edges completed incl 10mm thick plaster in CM 1:4
310
-
-
Item No. 17 :- M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles complete all as specified and direct. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment (ii) Rendering shall be measured and paid separately under respective items.
1290
-
-
Item No. 18 :- M&L for rendering 10mm thick in cement mortar 1:4 for fixing of wall tiles complete all as specified and directed.
1290
-
-
Item No. 19 :- Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
9
-
-
Item No 20:- M&L Brick work with Fly Ash bricks straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified.
4
-
-
Item No 21:- M&L Brick work with Fly Ash bricks straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) all as specified.
60
-
-
Item No 22 :- M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
26.8
-
-
Item No 23 : M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand (all by weight) complete.
910
-
-
Item No 24 :.M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.
8.4
-
-
Item No 24 (a) :.M&L for providing RCC 1:2:4 type B1 (Using 20mm graded stone aggregates) for landings, chajjas, shelves and similar article with plain faces incl chamfered, weathering, throating etc and set in cement mortar (1:4) incl necessary form work complete.
5.9
-
-
Item No 25 : Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
1580
-
-
Item No 26 : M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed
550
-
-
Item No 27 : M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surface, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufcturer's instructions and finished the surfaces even and fair without using extra cement complete.
NOte : Liquid WPC will be measured and paid separately.
680
-
-
Item No 28 : M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete.
390
-
-
Item No 29 - M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surface of walls in isolated widths exc 15cm but n. exc 30cm and finished even and smooth complete all as specified
772
-
-
Item No 30 - Supply only water proofing compound (liquid).
87
-
-
Item No 31 :- Taking down chowkats or frames not exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified and directed.
282
-
-
Item No 32 : Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified and directed.
375
-
-
Item No 33 : Taking down shutter of any description n exc 1sqm each and removing to store.
70
-
-
Item No 34 : Taking down and Refixing in the same opeing shutters of any description exceeding 1.00 Sq.m and not exceeding 2.00 Sq.m each after easing and adjusting complete all as specified and as directe.
198
-
-
Item No 35 : M&L Second class hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
4.61
-
-
Item No. 36 - Cutting holes in brick walls exc half brick but not exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.
1188
-
-
Item No. 37 :- M&L Second class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.20 (a) complete all as specified and directed.
250
-
-
Item No. 38 :- S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
400
-
-
Item No. 39 :- S&F factory made UPVC white colour Slinding Window three track made of extruded profiles with wall thickness of 2.3 mm (+0.2 mm ), Window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding interlock (one vertical length in each shutter) (45.5mm X 28mm), glazing bead (24.5mm X 16mm) will be mitered, cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket 1.2 + 0.2mm thick galvanised steel frame (30mm X 18mm) 2 Nos, sliding sash (30mm X 18mm) 2 Nos, sliding mesh sash (26mm X 10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware (tough lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.
NOte:- The unit rate includes cost of glass and other connected accessories).
580
-
-
Item No. 40 :- S&F 7mm thick aluminium grills of make "Decogrill" model DG 104 surrounded by aluminium 'C' channel with mesh size 99 x 105 mm all as specified and directed.
580
-
-
Item No. 41 :- S&F factory made UPVC white colour fixed window/ventilator made of extruded profile with thickness of 2.3mm (+-2mm) Window profile with hollow section with multi chamber, Frame (60mm X 58mm) Glazed bead (35mm X 20mm) will be mitered cut and fusion sealded at all corners including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket 1.2+ -0.2mm thick glavanised steel frame (28mm X 21.5mm) , T profile (27mm X17mm) to be inserted in repair profile. Frame will be fixed to the wall with 8mm X 100mm long fasteners, 5mm thick glazing with selected quality glass ad gauge as required at site. (Note : The unit rate includes the coat of glass, gauge and all other connected accessories) area n. exc 1.00 sqm each
82
-
-
Item No 42 : S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.
1260
-
-
Item No. 43 - S&F Mild Steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0
233
-
-
Item No. 44 :- S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed
620
-
-
Item No. 45 :- S&F Factory made solid PVC Moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face,with particle board core supplying and fixing in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed.
20
-
-
Item No. 46 :- S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed
150
-
-
Item No. 47 :- M&L butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 for 100 mm long complete all as specified and directed.
396
-
-
Item No. 48 :- M&L butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type C-22 for 75 mm long complete all as specified and directed.
20
-
-
Item No. 49 :- S&F Butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed.
990
-
-
Item No. 50 :- S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300 mm length of bolt complete all as specified and directed.
330
-
-
Item No. 51 :- S&F repairs aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.
264
-
-
Item No. 52 :- S&F in repairs Aluminium alloy anodised Sliding Door Bolt with hasp and staple (Bolt Type) of size 300mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
132
-
-
Item No. 53 :- S&F in repairs Aluminium alloy with GI Butt hinges of size 100mm type C-21 complete all as specified and directed
396
-
-
Item No. 54 :- S&F mild steel, 150 mm long ordinary helical door spring incl roller and roller plate complete.
132
-
-
Item No. 55 :- S&F 200 mm long aluminum anodised barrel tower bolts of extruded section as specified.
924
-
-
Item No. 56 :- S&F 100 mm long aluminum anodised barrel tower bolts of extruded section as specified.
20
-
-
Item No. 57 :- S&F 150 mm extruded aluminum alloy handles, fabricated type anodised complete all as specified.
924
-
-
Item No. 58 :- S&F 100 mm extruded aluminum alloy handles, fabricated type anodised complete all as specified.
20
-
-
Item No. 59 :- S&F floor stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring. Fixed in door complete as directed by Engr-in-Charge
198
-
-
Item No. 60 :- S&F small fittings of 2nd class hard wood door, window stops and the like not exc 200 cucm each including MS butt hinges medium weight, cold rolled 50mm long all as spd.
198
-
-
Item No. 61 :- S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
78
-
-
Item No 62 : Taking down old wooden/wood based particle board & S&F 18/19 mm thick high density PVC solid fibre board duly laminated 2mm thick prelaminated PVC sheet on front face (ISI mark) etc in kitchen cupboard etc.
180
-
-
Item No 63 - S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete.
198
-
-
Item No 64 : - S&F aluminium handles cast type anodised of 100 mm size complete all as specified and directed.
396
-
-
Item No 65 : - S&F Continuous (piano) hinges of brass width of flaps (when open) 40 mm bright finish or electrogalvanised with cadmium plated screws complete all as specified and directed.
520
-
-
Item No 66 :- S&F magnetic catcher with nut and screw of mild steel bright finish all as specified and directed.
264
-
-
Item No 67 :- S&F in rep of stainless steel kitchen plate rack of size 600x750x250mm complete all as specified.
58
-
-
Item No 68 :- S&F in rep of stainless steel kitchen plate rack of size 750x750x250mm complete all as specified.
8
-
-
Item No. 69 - S&F MS Peg set of six powder coated as approved by GE.
132
-
-
Item No. 70 - S&F in repair stainless steel fancy type curtain rod 25 mm dia including end globe/mountings as approved complete
790
-
-
Item No. 71 - S&F SS Curtain rod Bracket fancy type for curtain rod 25 mm dia of any colour as approved complete.
528
-
-
Item No. 72 :- Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.
430
-
-
Item No. 73 :- Taking up or down steel tubing & connectings including cleaning if refixing required for 20mm bore of pipe complete all as specified and directed.
732
-
-
Item No 74:-Taking up or down steel tubing and connections including cleaning if refixing required for 25 mm bore of pipe complete all as specified and directed.
610
-
-
Item No. 75 :- M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves,lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good in brick walls, cutting not exceeding 10 cm girth complete all as specified and directed.
430
-
-
Item No. 76 :- S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified.
430
-
-
Item No. 77 :- S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified.
732
-
-
Item No. 78 :- S & F 25 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified.
610
-
-
Item No. 79 :- S & F in repair chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete.
74
-
-
Item No. 80 :- S & F in repair chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete.
8
-
-
Item No. 81 :- S&F chromium plated single lever wall mixer with connecting legs and wall flange complete.
58
-
-
Item No. 82 :- M&L in repair vitreous china WHB size 550 x 400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete.
74
-
-
Item No. 83 :- S & F vitreous pedestal china for WHB as per suitable for WHB size 550x400 mm complete.
16
-
-
Item No. 84 :- S & F LDPE pipe 50mm of pr rating 6Kgf/Sq. cm fixed complete to walls, ceilings or in floors etc
99
-
-
Item No. 85 :- S & F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed.
16
-
-
Item No. 86 :- S&F in repair vitreous china squating pan 'Orissa' pattern WC size 580x440 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor all as specified.
58
-
-
Item No. 87 :- S&F in repair 10Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete.
74
-
-
Item No. 88 :- S&F in repair chromium plated health faucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete.
32
-
-
Item No. 89 :- S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
330
-
-
Item No. 90 :- S&F in repair cabinet mirror, box type of size 350 x 450 mm of colour as approved fixed to wall complete.
16
-
-
Item No. 91 :- S&F in repair Looking mirror 5.5 mm thick of selected quality glass of size 600 x 450 mm bevelled edge ,mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washers including aluminium anodized frame complete all as specified and directed.
58
-
-
Item No. 92 :- S&F in repair bib tap 15mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete.
198
-
-
Item No. 93 :- S&F in repair for 15 mm bore of pipe pillar taps cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
8
-
-
Item No. 94 :- S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.
16
-
-
Item No. 95 :- S&F in repair aluminium anodised tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.
58
-
-
Item No. 96 :- S&F in repair angle cock 15mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.
330
-
-
Item No. 97 :- S&F in repair CP two way angle valve with wall flanges 15mm bore, screwed down, screwed for iron pipe or for brass ferrule complete.
16
-
-
Item No. 98 :- S&F in repair of stainless steel soap dish, of standard size and shape complete.
74
-
-
Item No. 99 :- S&F in repair chromium plated toilet paper holder with flap complete.
16
-
-
Item No. 100 :- S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes, & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x160 mm complete.
8
-
-
Item No. 101 :- S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
58
-
-
Item No. 102 :- S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed.
74
-
-
Item No. 103 :- S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC.
16
-
-
Item No. 104 :- S&F glass shelf assembly cosisting of 5.5 mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60 cm long
74
-
-
Item No. 105 :- M&L for 18 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.
26
-
-
Item No. 106 :- M&L for machine cut cudappah stone slab 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
50
-
-
Item No. 107 :- Mild Steel TMT bar 8 mm dia cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
690
-
-
Item No. 108 :- Taking down of eaves gutters and rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.
2048
-
-
Item No. 109 :- M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.
99
-
-
Item No. 110 :- M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed.
523
-
-
Item No. 111 :- M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.
936
-
-
Item No. 112 :- M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 75 mm bore of pipe etc complete all as specified and directed.
490
-
-
Item No. 113 :- S&F stack clamps made out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nut and securing ends of stays to wall or roof for
110 mm bore of pipe complete all as specified and directed.
176
-
-
Item No. 114 :- S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.
132
-
-
Item No. 115 :- S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed.
66
-
-
Item No. 116 :- M & L PVC (SWR) Tee of 110mm dia etc complete.
22
-
-
Item No. 117 :- S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.
264
-
-
Item No. 118 :- S&F PVC (SWR) branch pieces, single (equal or un equal), ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door
33
-
-
Item No. 119 :- S&F PVC (SWR) branch pieces, single (equal or un equal), ordinary or inverted (spigot or socket type) or with parralled branches of 75 mm dia with access door
33
-
-
Item No. 120 :- S&F PVC (SWR) vent cowl 110mm bore
33
-
-
Item No. 121 :- M&L PVC (SWR) floor trap of diameter of outlet 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed
206
-
-
Item No. 122 :- S&F PVC (SWR) 'P' trap for 110 mm dia etc complete.
16
-
-
Item No. 123 :-Dismantling water tanks of any description, capacity exc 250 and not exc 500 litres and removing from site complete all as specified and directed.
66
-
-
Item No. 124 :- Dismantling water tanks of any description, capacity exc 500 and not exc 1000 litres and removing from site complete all as specified and directed.
8
-
-
Item No. 125 :- S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed
66
-
-
Item No. 126 :- S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top)1000 litre capacity hoisted and fixed in position complete all as specified and directed
8
-
-
Item No. 127 :- S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.
74
-
-
Item No. 128 :- S & F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete.
74
-
-
Item No. 129 :- S & F in repairs Gun metal, globe or gate valve with iron wheel head, 25 mm bore, screwed both ends for iron pipe complete.
74
-
-
Item No. 130 :- M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
1292
-
-
Item No. 131 :- M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
123
-
-
Item No. 132 :- Removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth complete all as specified and directed.
440
-
-
Item No. 133 :- M&L for preparation of old of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
599
-
-
Item No. 134 :- M&L for preparation of old of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
40
-
-
Item No. 135 :- M & L for applying 2mm thick Putty in two layers on old wall surfaces including complete removal of existing wall finish of any discription with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete.
15004
-
-
Item No. 136 :- M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty in two layers including preparation complete.
2002
-
-
Item No. 137 :- M & L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete.
12015
-
-
Item No. 138 :- M & L for applying 2mm thick Putty in two layers on old ceiling surfaces including complete removal of existing finish of any discription with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete.
864
-
-
Item No. 139 :- M & L for preparation of newly plastered surfaces of ceiling and applying 2 mm thick wall care putty including preparation of new surface complete.
390
-
-
Item No. 140 :- M & L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete.
1254
-
-
Item No. 141 :- M & L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping distemper surfaces and applying one coat of oil Bound Distemper of any light shade complete all as specified and directed.
650
-
-
Item No. 142 :- M & L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying two coat of white wash complete all as specified and directed.
320
-
-
Item No. 143 :- Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
120
-
-
Item No. 144 :- M & L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall wurfaces/old decorated wall surfaces in case of old decorated wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials & making good minor cracks etc complete all as specified and directed.
6990
-
-
Item No. 145 :- Preparing surface of sunken slab and applying 15mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified. (liquid WPC will be paid separately)
68
-
-
Item No. 146 :- M & L Water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete (i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg /Sqm
3080
-
-
(ii) Applying evenly a tack coat industrial bitumen 85/25 grade @ 1.2 Kg/Sqm incl cleaning surfaces.
3080
-
-
(iii) Laying evenly over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3 Kg/Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.
3080
-
-
(iv) Applying two coats of bituminous aluminium paint including preparation complete.
3080
-
-
Item No. 147 :- M & L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/ kerbs/sunken slab etc complete all as specified and directed.
81
-
-
Item No. 148 :- M & L 10 mm thick rendering on roof surfaces / concrete surface in CM 1:4 with liquid water proofing compound @ 200ml per 50 Kg cement (Waterproofing compound should be measured & paid seperately) complete.
3080
-
-
INTERNAL ELECTRIFICATION
Item No. 149 :- Taking down copper / aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed.
2242
-
-
Item No. 150 :- Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN / Main Switch including old unserviceable MCCBs /MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site.
66
-
-
Item No. 151 :- Taking down carefully copper/aluminium Sub main wiring of any size from surface /concealed /existing conduit of any height and removing materials at size and making good disturbed surfaces of walls,floors roofs etc complete all as specified and directed.
1458
-
-
Item No. 152 :- M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of size 20/25 mm of white/ivory colour including all accessories, heavy duty ISI marked, after chasing in wall/ceiling etc with sunk in anodized pressed steel box 1.6mm thick, 60 mm deep for housing switch socket etc with white laminated 3mm thick sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-
-
-
-
(a) One light point controlled by one, one way switch 5 Amps
767
-
-
(b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator
264
-
-
(c) One light point controlled by one, two way switch 5 amps
13
-
-
(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.
190
-
-
(e) One 3 pin 5 Amps switch outlet point controlled by one switch on independent board.
248
-
-
(f) One bell point controlled by one, bell switch 5 Amps
58
-
-
Item No. 153 :- Description all as per item No 152 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLS PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.
132
-
-
Item No. 154 :- M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ivory colour including all accessories, heavy duty ISI marked, after chasing in wall/ceiling etc with sunken box 1.2mm thick, 60 mm deep with dolly duly, covered with modular white cover plate with inner frame fuitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following:-
-
-
-
(a) One light point controlled by one, one way switch 5 Amps
280
-
-
(b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator
64
-
-
(c) One light point controlled by one, two way switch 5 amps
2
-
-
(d) One 3 pin 5 Amps switch outlet point controlled by one switch on independent board.
80
-
-
(e) One 3 point 5 Amps switch socket outlet point controlled by one switch one the same board.
48
-
-
(f) One bell point controlled by one, bell switch 5 Amps
16
-
-
Item No. 155 :- Description all as per item No 154 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLS PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.
64
-
-
Item No. 156 :- Description all as per item No 154 here in before but using 4.0 sq mm single core copper conductor cable of multistranded FRLS PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point)
16
-
-
Item No. 157 :- S&F switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site.
1469
-
-
Item No. 158 :- S&F switch Piano type 2 way switch 5 amp, 230 Volts complete all as specified and directed at site.
26
-
-
Item No. 159 :- S&F switch Piano type single pole 15 amp, 230 Volts complete all as specified and directed at site.
132
-
-
Item No. 160 :- S&F switch bell push piano type 5 amp, 230 Volts complete all as specified and directed at site.
58
-
-
Item No. 161 :- S&F socket outlet 2 in 1, 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.
438
-
-
Item No. 162 :- S&F socket outlet 2 in 1, 6 pin, 5 amp and 15 amp, 230 Volts complete all as specified and directed at site.
132
-
-
Item No. 163 :- S&F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fiffing complete all as specified.
822
-
-
Item No. 164 :- S&F for stepped type electronic fan regulator flush Type complete all s specified and directed at site.
190
-
-
Item No. 165 :- S&F for Modular switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.
472
-
-
Item No. 166 :- S&F for Modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.
64
-
-
Item No. 167 :- S&F for Modular switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.
4
-
-
Item No. 168 :- S&F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6Amp, 2 module piano flush type complete all as specified.
128
-
-
Item No. 169 :- S&F for Modular switch Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6Amp, 2 module piano flush type complete all as specified.
64
-
-
Item No. 170 :- S & F for modulator fan regulator stepped type 120 watts 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed
40
-
-
Item No. 171 :- S&F for Bell push modular 6 Amps single module complete all as specified.
16
-
-
Item No. 172 :- S&F for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten / slanting fittings complete all as specified and directed.
214
-
-
Item No. 173 :- S&F for Bell Electric Ding dong type suitable for operation on 230 volt 50 Hz AC supply complete all as specified and as directed
74
-
-
Item No. 174 :- M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 Sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit
1250
-
-
Item No. 175 :- M&L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into PVC non etallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc and two runs of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- four runs of 6 Sqmm cable, two run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.
208
-
-
Item No. 176 :- S & F for sheet metal enclosure MCB DB TPN 4 way vertical type with 200 Amps rated bus bar 415 bolts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone manonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.
8
-
-
Item No. 177 :- S&F for sheet metal enclosure mCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stonemasonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.
58
-
-
Item No. 178 :- S & F for MCB triple pole and neutral rated capacity 63 Amps 415 volt breaking capacity 10 KA 'C' curve complete all as specified and as directed.
8
-
-
Item No. 179 :- S & F for MCB single pole and and neutral rated capacity 40 Amps 240 volt 240 volt breaking capacity 10 KA 'C' curve complete all as specified and as directed.
58
-
-
Item No. 180 :- S & F for MCB single pole rated capacity 5 to 32 Amps 240 volt breaking capacity 10 KA 'C' curve complete all as specified and as directed.
444
-
-
Item No. 181 :- S&F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/30 Amps including removal of old unserviceable one complete all as specified and as directed.
16
-
-
Item No. 182 :- S&F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit almp, in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed.
214
-
-
Item No. 183 :- S&F for Decorative wall mounted luminaire made out of polycarbonate unbreakable globe suitable for LED bulb and provision of LED bulb 10 watts complete all as specified and as directed.
254
-
-
Item No. 184 :- S&F for LED tube light fitting 10 watts batten aluminium extruded with docorative end caps complete all as specified and as directed.
85
-
-
Item No. 185 :- S & F for Energy saving new generation 10 Watts LED bulk head fitting IP-65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 form ceiling rose to fitting including bulb complete all as specified and directed.
100
-
-
Item No. 186 :- S & F for wall mounted LED tube light fitting 20 Watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen output box type fitting, 230 volts and integrated electronic dirver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.
392
-
-
Item No. 187 :- S & F for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape wit clamps, nut, bolts complete all as directed by Engineer-in-chage.
17
-
-
Item No. 188 :- Taking down ceiling fan/exhaust fan of any sweep, keeping with safe custod and refixing the same with replacement of UNSV 3 core PVC insulated PVC sheased 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan, spray painting the fan body and wings with syntetic enamel paint of white colour and filling the cavities complete all as specified and directed.
222
-
-
Item No. 189 :- S & F for Energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 Cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base complete all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).
74
-
-
Item No. 190 :- S&F for water heater storage type (Geyser) vertical/Horizental types as per site requirement with inner contaner of capacity 25 ltrs, electrically operated, AC 230 Volts, BEE 5 star rated, ISI marked including 04 Nos of old fashner nuts required suitable size fixed in brick wall, PVC connection pipe connection pipe hot & cold complete all as specified and directed.
58
-
-
Item No. 191 :- Supply, insstallation, commissioning and testing indoor wall mounting LT Panel Board of minimum size 1.00 m (height) x 1.00 m (breath x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four compartment for fixing of four nos Three phase meter and MCB TPN and providng glass view for reading of meter and providing rubber/PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 10 Sqmm copper wire and connections of all outgoing / incomming existing cable of any size complete all as specified and as directed by Engineer-in-Charge. (For Officers Md Accn)
2
-
-
INCOMMING :-
(a) Copper strip busbar of size 30 x 5 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos.
(b) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=25 KA breaking capacity, rating 100 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links-01No.
(c) Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4"x4") square dial with selector switch - 01 Nos (d) LED Neon indicator lamp (RYB) with holder, 230/250 volts, AC -01 set (set of three) Make:-AE, L&T
-
-
-
OUTGOING
(a) MCB, Tripple pole & neutral, 40 amps, 415 volts, 'C' curve, 10 KA all complete as specified and as directed - 4 Nos (Officers Accn)
(b) MCB, single pole & neutral, 10 amps, 240 volts, 'C' curve, 10 KA all complete as specified and as directed - 01 Nos (Stair case lighting)
(c) Single Phase Electronic Energy Meter accuracy Class 1.0, 240V, with in home display 5-30 A, 3 nos self locking meter seal, LCD diplay with option port, anti temper features, LCD test, serial no, Date, RTC, Cumulative Kwh, Last bill Kwh, Instanteous Load, Last bill MD, In stantaneous KW Volts, PF, HZ, MD, total Tamper Count Self billing Code, Battery backup in absence of power for display active energy kwh, including all incoming and out going connections. = 01 (Make-L&T, Cat Part No:WM101BC5DDH /Secure)
-
-
-
(d) Supply and fixing of Three Phase Electronic Energy Meter accuracy Class 1.0, 240V, with in-home display 10-60A, 3 Nos self locking meter seal, LCD display optical port, anti temper features, LCD test, serial no, Date, RTC, Cumulative Kwh, Last bill Kwh, instanteous Load, Last bill MD, Instantaneous KW, Volts, PF, HZ, MD, total Tamper Count, Self Billing Code, Battery backup in absence of power for display active energy kwh, including all incoming and out going connections =04 Nos (Make-L&T, Cat No: WR301BC7D10 / Secure)
-
-
-
Item No. 192 :- Supply, installation, commissioning and testing indoor wall mounting LT Panel Board of minimum size 1.00 m (height) x 1.00 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of five Nos single phase meter and MCB SPN and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip wire bus bar of suitable size MCCB input and MCCB/MCB output of suitable size to MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 1.5 sqmm copper wire and connections of all outgoing / incomming existing cable of any size complete all as directed by Engr-in-charge. (For JCO/ ORs Md Accn)
10
-
-
INCOMMING :-
(a) Copper strip busbar of size 25 x 5 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos.
(b) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=25 KA breaking capacity, rating 63 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links-01No.
(c) Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4"x4") square dial with selector switch - 01 Nos (d) LED Neon indicator lamp (RYB) with holder, 230/250 volts, AC -01 set (set of three) Make:-AE/L&T
-
-
-
OUTGOING (a) MCB, Single pole & neutral, 40 amps, 240 volts, 'C' curve, 10 KA all complete as specified and as directed - 5 Nos
(b) Fixing only serviceable existing electric meter - 01 Nos (c) Single Phase Electronic Energy Meter accuracy Class 1.0, 240V, with in-home display 5-30 A, 3 nos self locking meter seal, LCD diplay with optical port, anti temper features, LCD test, serial no. Date, RTC, Cumulative Kwh, Last bill Kwh, Instanteous Load, Last bill MD, Instantaneous KW, Volts, PF, HZ, MD, total Tamper Count Self Billing Code, Battery backup in absence of power for display active energy kwh, including all incoming and out going connections. -04 Nos.(Make - L&T, Cat No: WR301BC7D10/ Secure)
-
-
-
Item No. 193 :- Supply, installation, commissioning and testing indoor wall mounting LT panel Board of minimum size 1.00 m (H) x 1.20 m (B) x 0.30 m (D) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including seven Nos single phase meter and MCB SPN and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves MCCB input and MCCB/MCB output of suitable size to MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 1.5 sqmm copper wire and connections of all outgoing / incomming existing cable of any size complete all as directed by Engr-in-charge. (For ORs Md Accn - 06 Qtrs)
3
-
-
INCOMMING :-
(a) Copper strip bus bar of size 25 x 5 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos.
(b) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=25 KA breaking capacity, rating 63 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links-01No.
(c) Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4"x4") square dial with selector switch - 01 Nos (d) LED Neon indicator lamp (RYB) with holder, 230/250 volts, AC -01 set (set of three) Make:-AE/L&T
-
-
-
OUTGOING (a) MCB, Single pole & neutral, 40 amps, 240 volts, 'C' curve, 10 KA all complete as specified and as directed - 09 Nos
(b) Fixing only serviceable existing electric meter - 01 Nos (c) Single Phase Electronic Energy Meter accuracy Class 1.0, 240V, with in-home display 5-30 A, 3 nos self locking meter seal, LCD diplay with optical port, anti temper features, LCD test, serial no. Date, RTC, Cumulative Kwh, Last bill Kwh, Instanteous Load, Last bill MD, Instantaneous KW, Volts, PF, HZ, MD, total Tamper Count Self Billing Code, Battery backup in absence of power for display active energy kwh, including all incoming and out going connections. -06 Nos. (Make- L&T, Cat No:WR301BC7D10/secure.
-
-
-
Item No. 194 :- Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth in hard / dense soil etc complete all as specified and directed
232
-
-
Item No. 195 :- Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soil etc complete all as specified and directed
160
-
-
Item No. 196 :- Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed
72
-
-
Item No. 197 :- Supply and laying well burnt Bricks, locally availble best quality (sub class "B" bricks) laid in trenches perpandicular to U/G cable for cable protection complete all as specified.
6240
-
-
Item No. 198 :- Supply, spread and filling approved sand in cable trenches for cushioning of LT UG cable all as specified. NOTE:- Punned thickness only will be measured and paid.
63
-
-
Item No. 199 :- Boaring holes horizontally under Road without damaging the surface of road (minimum 1.0 Mtr below the road surface with the help of GI tubing of any dia not exceed 80 mm bore for passing of UG cable all mas specified and as directed (GI pipe laid shall be measured seperately).
40
-
-
Item No. 200 :- S&F GI tubes Light grade with all fittings laid in trenches of 40 mm bore of pipe complete all as specified and directed.
-
-
-
(a) 40 mm dia bore
24
-
-
(b) 25 mm dia bore
20
-
-
Item No. 201 :- Supply and laying testing commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of following sizes complete all as specified and directed.
-
-
-
(a) 4 Core x 16 Sqmm
695
-
-
(b) 4 Core x 25 Sqmm
300
-
-
(c) 3.5 Core x 35 Sqmm
155
-
-
Item No. 202 :- M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part -I including excavation and earthwork in any type of soil/strata and testing on completion Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted..
30
-
-
SCHEDULE "A" (Schedule of credit)
Schedule of Credite Rs 501573.00 (Minus) inserted by the MES.
(Note : Credite amount shall be deducted manually to arrive net bid amount)
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements