Military Engineer Services Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 80,800Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_685209_1Tender No
8996/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
8.74
-
-
Boring, providing and installation 450 mm dia bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). Note: Truck Mounted rotary/ TMR/ Tube well boring machine shall not be used .
160
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
23.94
-
-
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering
44.8
-
-
Providing and laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level gregate 40 mm nominal size derived from natural sources)
4.39
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete of M25 grade with minimum cement content of 330 kg /cum for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete all works upto plinth level
20.79
-
-
All as per Item No.1.08 above but above plinth level upto floor V level
22.25
-
-
Providing and fixing Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for massconcrete
54.52
-
-
Providing and fixing Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform
102.09
-
-
Providing and fixing Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers andcantilevers
99.75
-
-
Providing and fixing Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts
48.96
-
-
Providing and fixing Centering and shuttering including strutting, propping etc. and removal of form for : Weather shade, Chajjas, corbels etc., including edges
4.3
-
-
S&F Brick work with common burnt clay F.P.S. (non modular) bricks with Cement mortar 1:6 (1 cement : 6 coarse sand)of class designation 7.5 in foundation and in plinth complete.
13.89
-
-
S&F Brick work with common burnt clay F.P.S. (non modular) bricks with cement mortar 1:6 (1 cement : 6 coarse sand) of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes complete.
25
-
-
S&F Half brick masonry with common burnt clay F.P.S. (non modular) bricks with Cement mortar 1:4 (1 cement :4 coarse sand) of class designation 7.5 in superstructure above plinth level up to floor V level.
40
-
-
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
40
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)
12.19
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat of size 65x100 mmcomprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).
Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
10.4
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm thick of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
3.69
-
-
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.
19.8
-
-
Providing and fixing factory made 30mm thick plain panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat molded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification.
6.3
-
-
S&F IS : 12817 marked 125x64x2.50 mm mm stainless steel butt hinges (heavy weight) with stainless steel screws etc. all as per specified and directed.
18
-
-
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directions.
8.54
-
-
Providing and fixing aluminium tower bolts 200 mm , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete
16
-
-
Providing and fixing aluminium sliding door bolts 300 mm , ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
6
-
-
Providing and fixing aluminium handles 125 mm, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
16
-
-
Providing and fixing Twin rubber stopper aluminium hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws
etc. complete.
6
-
-
Providing and fixing Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. CRS Thermo-Mechanically Treated bars of grade Fe-500D or more.
10056.8
-
-
Providing and fixing Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. CRS Thermo-Mechanically Treated bars of grade Fe-500D or more.
5980.8
-
-
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) aluminium work for frame of Door, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)
84
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron) shutters of windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required.
Note : (Also Aluminium Sliding window Three track will be provided under this item wherever required)
52
-
-
S&F Sheet glass of thickness 5.5mm, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directions of engineer-in-charge
12
-
-
Anodised aluminium grill (anodized transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame
24.77
-
-
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.
d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.
89.78
-
-
Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement ortar 1:3 (1 cement : 3 fine sand) and finished neat: 12.19.1 With common burnt clay F.P.S. (non modular) brick tiles of class designation 10
89.78
-
-
Providng and laying 150 mm thick hard core , PCC 1:4:8 100 mm thick base and 50 mm thick Cement concrete 1:24 in floor base.
45
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red
6
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
25
-
-
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. ( 600x600 mm)
21
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 600x600 mm)
3.23
-
-
Providing and laying 7 to 8mm thick (square/rectangular) Ceramic glazed floor tiles NON SKID of size 300x300 mm or more of 1st quality conforming to IS : 15622, of approved make, in all colour shades, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete all as specified and as directed.
18
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
78
-
-
M & L for 6 mm cement plaster of mix 1:3 on fair faces ceiling , Chajja, shelves and surface to be even and fair complete all as specified & directed.
66
-
-
M & L for 12 mm cement plaster of mixture1:6 on internal wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
48
-
-
M & L for Rendering 15 mm thick cement plaster with WPC @ 3% of wt of cement on external surfaces of brick work in CM 1:4 and surface to be finished even & smooth without using extra cement complete all as specified and directed. (WPC will be measured and paid separately).
145
-
-
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers complete all as specified and as directed.
26.9
-
-
M & L Preparation of newly plastered surfaces of ceiling and applying two/three coats of white wash over one coat of primer complete all as specified and directed.
66
-
-
M & L for distempering New work (two or more coats with 100 % Acrylic emulsion distemper of approved brand and manufacture to give an even shade over New work (two or more coats) over and including water thinnable priming coat with cement primer.
48
-
-
M&L for Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 09ltr/10 sqm)
145
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
-
-
Providing and fixing 25 mm dia ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
2
-
-
Providing and fixing PTMT Ball cock 25 mm nominal bore, 120 mm long, weighing not less than 198 gms of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
2
-
-
Providing and fixing32 mm dia Semi rigid pipe P.V.C. waste pipe for sink or wash basin, urinal including P.V.C. waste fittings complete.
6
-
-
Providing and fixing Brass chrome palted Tubular towel rail, 20mm dia, D type, 60cm long between flanges
2
-
-
Providing and fixing PVC (SWR) pipes single socketed in trenches 75 mm bore, in floors
12
-
-
Providing and fixing PVC (SWR) pipes single socketed in trenches 100 mm bore, in floors
8
-
-
Providing and fixing PVC (SWR) pipes single socketed in trenches 75 mm bore, along walls
7
-
-
Providing and fixing PVC (SWR) pipes single socketed in trenches 100 mm bore, along walls
7
-
-
Providing and fixing PVC ( SWR) Bends, , 75 mm bore
4
-
-
Providing and fixing PVC ( SWR) Bends , 100 mm bore
4
-
-
Providing and fixing PVC ( SWR) Traps 'P' or 'S', 75 mm bore
6
-
-
Providing and fixing PVC ( SWR) Traps 'P' or 'S', 110 mm bore
4
-
-
Providing and fixing PVC ( SWR) Cowls 100 mm bore
2
-
-
Providing and fixing PVC ( SWR) Cowls 75 mm bore
2
-
-
Providing and fixing PVC ( SWR) COUPLER
4
-
-
Providing and fixing PVC connections 15mm sizex 450mm
10
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
2
-
-
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
2
-
-
Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
6
-
-
Providing and fixing 15 mm nominal bore C.P. brass 2way bib cock/bib cock of approved quality conforming to IS:8931 :
4
-
-
Providing and fixing White Vitreous China wash basin of size 550X400 mm with C.I. brackets, single 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete all as specified and as directed.
4
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and as directed.
2
-
-
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern(Single half stall urinal with 5 litre P.V.C. automatic flushing cistern), with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
2
-
-
S&F Vitreous china urinal partition white of size 310x700 mm.
2
-
-
Providing and fixing 25 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.( external wall)
13
-
-
Providing and fixing 20 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. ( Concealed work,)
20
-
-
Providing and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
2
-
-
Providing and fixing PVC (SWR) floor trap,/nahani trap plain with grating including jointing with solvent cement
4
-
-
SCHEDULE 'A' PART-II (Hardstanding)
Note :-
(i) The connected items which are not catered in this part and the items which are technically required for execution of this part, the same shall be measured and paid under Part-I here-in-before and in this account nothing extra shall be admissible to the bidders / contractors by Deptt.
-
-
-
Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete
0.72
-
-
M & L forProviding, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
1.08
-
-
M &L for 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) for 75 mm thick PCC as in sub base of floor complete all as specified and directed.
1.62
-
-
M &L for Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping completecomplete all as specified and directed (100 mm thick).
2.16
-
-
M & L for Providing and filling grade 'A' sealing compound conforming to IS: 1834. in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction.
20
-
-
SCHEDULE 'A' PART-III (Sewage)
-
-
-
S&F RCC NP3 150mm dia pipes laid on & including 150mm thick moorum/sand/crushed stone bed with excavation upto depth 1.65m in any type of soil, incl manholes of standard size made of Brick masonry / RCC / Precast RCC with SFRC ventilating cover and frame incl all items and cativities to execute and make sewer line functional.
30
-
-
S&F Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with With common burnt clay F.P.S. (non modular) bricks of class designation 7.5and S.W. drain pipe 100 mm diameter, 1.8 m long including earth work in excavation in any type of soil complete as per standard design and as directed.
2
-
-
S&F LLDPE septic tank design to carry sewage and sullage water including earth work in excavation in any type of soil, PCC 1:4:8, D-2 below foundation, vent shaft, connection etc., complete for 10 users complete all as per manufacturer's instruction.
2
-
-
SCHEDULE 'A' PART-IV (Internal Electrification)
-
-
-
M&L for point wiring for light point/fan point/exhaust fan point/call bell point with PVC insulated unsheathed stranded FRLSH copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded FRLSH copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit medium duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick switch board with 5/6 A piano switch flush type one way 240 V and brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessary wall cutting and making good disturbed surface complete.
26
-
-
M&L for 05 A Independent switch socket board with two runs of PVC insulated unsheathed stranded FRLSH copper conductor cable of size 2x2.5 Sqmm, with one run of PVC insulated unsheathed stranded FRLSH copper conductor cable of size 1x2.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring including all necessary wall cutting and making good disturbed surface to match the existing surfaces.
10
-
-
S& F metal boxes of size 100 mm x100 mmx 60mm deep of thickness 1.2mm on surface or recess with suitable size of phenolic laminated sheet cover of thickness 3mm in front including painting and making good of good disturbed surfaces to match the existing surfaces.
8
-
-
S& F metal boxes of size 180 mm x100mmx 60mm deep of thickness 1.2mm on surface or recess with suitable size of phenolic laminated sheet cover of thickness 3mm in front including painting and making good of good disturbed surfaces to match the existing surfaces.
8
-
-
S&F Socket outlet 3 in 1, 3 pin, 5 Amps flush type 240 Volt .
10
-
-
S&F switch 5/6 Amps flush type 240 Volt .
40
-
-
S&F Ceiling rose 5A, 3 terminal PVC/poly carbonate isolated body ON existing jucntion box including connectionsets as required
22
-
-
Supply, fixing, testing of BEE 5 star rated ceiling fan 1200mm sweep with brushless direct current (BLDC) motor including all accessories/fittings/supports etc complete as specified and directed.
4
-
-
S & F Electronic fan regulator, stepped type 120/280V on existing phenolic laminated sheet complete all as directed.
4
-
-
S&F single pole and neutral sheet steel MCB distribution board, 8 way double door, 240 volts, on surface, recess complete with tinned copper bus bar neutral bus bar earh din bar, interconnections powder painted including earthing etc as required (but with MCB/RCCB/Isolator).
2
-
-
S & F 5A to 32 A rating, 240V/415 V, 10 kA "C" curve miniature circuit breaker single pole and neutral suitable for inductive load of following poles in the existing MCB DB complete with connection testing and commissioning etc as required.
2
-
-
S & F 5A to 32 A rating, 240V/415 V, 10 kA "C" curve miniature circuit breaker single pole suitable for inductive load of following poles in the existing MCB DB complete with connection testing and commissioning etc as required.
12
-
-
Supply and fix LED tube light fitting 1x20 Watt with high efficacy =115 lm/W in aluminium housing, compact batten suitable for single tube complete with all accessories including taking down old us complete all as specified.
10
-
-
Supply and fix LED tube light fitting 10 Watt, 2 ft LED batten with powdered coated aluminum housing & integrated electronic driver including taking down old us complete all as specified
2
-
-
S&F in repair LED Bldg security light fitting 45 Watt with all accessories, (with extra driver) attractively styled high pressure die cast housing acting as a heat sink housing epoxy powder coated in dark graphite grey colour suitable for mounting bracket of 40mm bore GI pipe light grade mounting clip, etc. complete with all accessories as directed.
8
-
-
Supply and fix Ball valve/stop cock with iron wheel head, screwed both ends for iron pipe of size 25 mm bore complete all as specified and directed.
2
-
-
M & L for supply, laying, connection and testing compete fixing G.I. pipes medium grade 25 mm NB complete with G.I. fittings including trenching and refilling etc complete tapping, connecting with main line along road complete as specified and directed.
60
-
-
M&L Earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6 mm buried directly in ground connected to galvanized earth lead strip of size 25 mm x 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron including 40mm dia light grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe light grade 20mm dia, charcoal or coke and common salt in alternative layers of 15 cm compacted thickness all around the electrode with concrete earth pit with PCC type C1 , 1:3:6 (using 20 mm graded stone aggregate), 50mm thick precast RCC type B1, (1:2:4)(using 20 mm graded stone aggregate) pit cover reinforced with 8mm dia deformed bar and suitable handle made of 10mm dia round bar including galvanised strip of size 25mm x 4mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a distance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No.3 of SSR Part-I, 2009 and all as directed including taking down old unserviceable one. (Note : GI strip upto 7.5 m length shall be deemed to include in the cost of above item.
2
-
-
SCHEDULE 'A' PART-IV (External Electrification)
-
-
-
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4.0 core complete all as specified and directed.
240
-
-
Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of 16 sqmm 4.0 core size direct in ground including excavation, removing and refilling the trench, sand cushioning etc as required but excluding protective covering.
180
-
-
Supply and lay Common burnt clay F.P.S. (non modular) bricks class designation 7.5 laid in trenches for LT cable protection with length of brick perpendicular to length of cable complete all as specified and directed.
1.44
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%