Military Engineer Services Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 2,28,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_699403_1Tender No
8126/ATender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M & L for Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894 in CM 1:4 (1 cement: 4 coarse sand) in super structure above plinth and upto floor V level complete all as specified and as directed.
120
-
-
... More
Taking down old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and as directed.
4140
-
-
... More
M&L for 15 mm thick cement plaster in two coats in CM 1:4; outer layer 5 mm thick mixed with water proofing material as per manufacturers instructions and finished even and smooth with out using extra cement complete all as specified and as directed.
Note: WPC will be measured and paid seperately.
1580
-
-
... More
M&L for 12mm thick cement plaster of mix 1:6 (1 cement : 6 fine sand) on brick or concrete surfaces finished even and smooth with out using extra cement complete all as specified and as directed.
2080
-
-
... More
M&L for 6mm thick in cement plaster of mix 1:3 (1 cement : 6 fine sand) on ceiling surfaces, chajjas, shelves etc finished even and smooth w/o using extra cement complete all as specified and as directed.
800
-
-
... More
M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on newly plastered surfaces of wall (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.
1580
-
-
... More
M&L for distempering two or more coats with oil bound washable distemper of approved brand to give an even shade on newly plastered wall surfaces over a coat of water thinnable cement primer including 2mm wall putty complete all as specified and as directed.
2080
-
-
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. and applying 02 coats of distemper with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade over a coat of primer including 2mm wall putty on old plastered surfaces of wall complete all as specified and as directed.
584
-
-
... More
M&L for three coats white washing with lime to give an even shade on newly plastered ceiling surfaces complete all as specified and as directed.
800
-
-
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. and applying three coats white washing with lime to give an even shade on old plastered ceiling surfaces complete all as specified and as directed.
358
-
-
... More
M&L for white washing with lime in old work of walls including preparation and applying one coat complete all as specified and as directed.
213
-
-
... More
Demolishing existing roof treatment including APP membreane, screed bed etc complete and disposal off material within 50 metres lead complete all as specified and as directed.
1220
-
-
... More
Dismantling existing brick tiles claddig over roof treatment in roof including stacking material within 50 metres lead complete all as specified and as directed.
130
-
-
... More
M&L for 25mm thick PCC tiles (hydraulically pressed) in roof, jointed with neat cement slurry including rubbing and cleaning etc. complete, over and including 15 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) complete all as specified and as directed. (Note: Nature of roof is Accessible roof)
130
-
-
... More
M&L for grading roof for water proofing treatment with Cement concrete 1:2:4 (using 12.5mm stone aggregate) complete all as specified and as directed.
25.5
-
-
... More
M&L for providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete and applying two coats of aluminium paint. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane complete all as specified and directed.
1020
-
-
... More
M&L for 12mm thick plastering in CM 1:4 (1 cement : 4 coarse sand) mixed with water proofing material on new/old concrete surface to received APP membrane sheet complete all as specified and as directed.
Note: WPC will be measured and paid seperately.
1020
-
-
... More
Demolition of Stone slab/tiles of any description (thickness 10 to 25mm) in floors/wall including cement mortar and stacking material within 50 metres lead complete all as specified and as directed.
1615
-
-
... More
M&L for Providing and laying 7 to 8mm thick (square/rectangular) Non-skid Ceramic floor tiles of size 300x300 mm or more of 1st quality conforming to IS : 15622, of approved make, in all colour shades, laid over and including 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete all as specified and as directed.
160
-
-
... More
M&L for Providing and laying rectified Ceramic floor tiles of size 400x400 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid over and including 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete all as specified and as directed.
150
-
-
... More
M&L for Providing and fixing rectified ceramic wall tile in vertical surface of walls/skirting, over and including 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade, complete all as specified and as directed.
11
-
-
... More
M&L for Providing and fixing 7 to 8mm 1st quality ceramic glazed tiles of approved size conforming to IS : 15622 of approved make in all colours, shades of any size as approved by Engineer-in-Charge as in dados over and including 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete all as specified and as directed.
315
-
-
... More
M&L for 25mm thick Kota stone slab flooring over and including 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) complete all as specified and as directed.
910
-
-
... More
M&L for Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid over and including 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete all as specified and as directed.
75
-
-
... More
M&L for Providing and laying Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent in required design and patterns, as in cooking platform with 18 mm thick stone slab over and including 20 mm (average) thick base of cement mortar 1:4 laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc complete all as specified and as directed.
7
-
-
... More
M&L for Reinforced cement concrete (Nominal mix) work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified an as directed.
0.55
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ) complete all as specified and as directed.
4
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers complete all as specified and as directed.
11
-
-
... More
M&L for TMT bars of grade Fe-500D or more for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level complete all as specified and as directed.
65
-
-
... More
Demolishing cement concrete Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead complete all as specified and as directed.
28.75
-
-
... More
Demolishing cement concrete Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead complete all as specified and as directed.
2
-
-
... More
M&L for Providing and laying 40mm thick PCC with cement concrete 1:2:4, in floor and base of overhead tank etc incl finishing the surface even and smooth without using extra cement complete all as specified & directed.
40
-
-
... More
M&L for making plinth protection 50mm thick of cement concrete 1:3:6 (by using 20 mm stone aggregate), finished even and smooth without using extra cement complete all as specified & directed.
240
-
-
... More
M&L for providing and laying PCC with cement concrete 1:5:10 (using 40mm graded stone aggragte) as in filling of floor complete all as specified & directed.
2
-
-
... More
M&L for providing and laying 25mm thick PCC with cement concrete 1:2:4 (by using 12.5 mm stone aggregate) as in flooring complete all as specified and directed.
5
-
-
... More
Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers complete all as specified and as directed.
330
-
-
... More
Dismantling Water closet Pan of all sizes including all fittings and disposal of dismantled materials complete all as specified and as directed.
17
-
-
... More
M&L for providing and fixing White Vitreous china Orissa pattern Water closet squatting pan (Indian type) of size 580x440 mm with integral type foot rests with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and as directed.
13
-
-
... More
M&L for Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and as directed.
4
-
-
... More
Taking down glavanised iron pipes of 15mm dia nominal bore including including all fittings manually/ by mechanical means and stacking of pipes within 50 metres lead complete all as specified and as directed.
80
-
-
... More
Supply and fixing 20mm nominal dia pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints including concealed work & cutting chases and making good the walls etc complete all as specified and as directed.
80
-
-
... More
Taking down glavanised iron pipes of 20mm dia nominal bore including including all fittings manually/ by mechanical means and stacking of pipes within 50 metres lead as per direction of Engineer-in-charge .
50
-
-
... More
Supply and fixing 25mm nominal dia pipes chlorinated Polyvinyl Chloride (CPVC) pipes expose on wall surface, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
50
-
-
... More
Supply and fix in repairs Chromium plated brass shower rose 150 mm diameter with 15 or 20 mm inlet complete all as specified and as directed.
12
-
-
... More
Supply and fix in repairs 15mm nominal bore Chromium plated brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 complete all as specified and as directed.
12
-
-
... More
Supply and fix in repairs15mm nominal bre Chromium plated brass bib cock of approved quality conforming to IS:8931 in repairs complete all as specified and as directed.
30
-
-
... More
Supply and fix in repairs 15mm nominal bore Chromium plated brass angle valve of approved quality conforming to IS:8931 complete all as specified and as directed.
41
-
-
... More
Supply and fix in repairs 15mm nominal bore with 45cm length unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour complete all as specified and as directed.
41
-
-
... More
Supply and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
12
-
-
... More
Supply and fixing White Vitreous China wash basin of size 630x450mm with C.I. brackets, single 15 mm C.P. brass swan kneck pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require including dismantling of old WHB with all fittings complete all as specified and as directed.
12
-
-
... More
Supply and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and as directed.
12
-
-
... More
Supply and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with 5 litre white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required including dismanling of old urinal with all fittings complete all as specified and as directed.
12
-
-
... More
Supply and fixing PTMT Bottle Trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of waste coupling, 77mm breadth with 25mm minimum water seal, weighing not less than 260 gms for Wash basin and sink complete all as specified and as directed.
12
-
-
... More
M&L for 75mm dia outlet PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
20
-
-
... More
Supply and fixing circular 125mm nominal dia with 25mm waste hole PTMT grating of approved quality and colour complete all as specified and as directed.
20
-
-
... More
Supply and fixing 75mm dia pipe unplasticised Rigid PVC SWR pipes single socketed conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion fixed to walls including necessary bracktes clamps or laid in floor complete all as specified and as directed
50
-
-
... More
Supply and fixing 110mm dia pipe unplasticised Rigid PVC SWR pipes single socketed conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion fixed to walls including necessary bracktes clamps or laid in floor complete all as specified and as directed
30
-
-
... More
Taking down C.I. or asbestos/PVC rain water pipe of dia 75mm with fittings and clamps including stacking the material within 50 metres lead complete all as specified and as directed.
50
-
-
... More
Taking down C.I. or asbestos rain water pipe of dia 100mm with fittings and clamps including stacking the material within 50 metres lead complete all as specified and as directed.
30
-
-
... More
Supply and fixing 75 x 75 x75 mm single Tee with door on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water/SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and as directed.
4
-
-
... More
Supply and fixing 110 x 110 x 110mm single Tee with door unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water/SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and as directed.
4
-
-
... More
Supply and fixing 75mm dia Bend 87.5° on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water/SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and as directed.
4
-
-
... More
Supply and fixing 110mm dia Bend 87.5° on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water/SWR pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and as directed.
4
-
-
... More
S&F 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.
4
-
-
... More
S&F 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.
4
-
-
... More
Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level complete all as specified and as directed.
5
-
-
... More
M&L for providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and as directed.
(Note: 4 Nos 2000 Litre tank and 01 Nos 500 Litre Tank)
8500
-
-
... More
Supply and fixing PTMT Ball cock 25 mm nominal bore, 152 mm long, weighing not less than 440 gms of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball complete all as specified and as directed.
5
-
-
... More
Making connection of G.I. distribution branch with G.I. main of 25 to 40mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete all as specified and as directed.
5
-
-
... More
Supply and fixing 20 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end), complete all as specified and as directed.
5
-
-
... More
Supply and fixing 20 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end), complete all as specified and as directed.
5
-
-
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead complete all as specified and as directed.
270
-
-
... More
M&L for steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, grills,frames, guard bar, ladder, railings, brackets, gates and similar works complete al as specified and as directed.
2980
-
-
... More
Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door frames/Chowkhat Size of frame 65 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).
Note: For WPC solid door frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
60
-
-
... More
Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door frames/Chowkhat Size of frame 65 x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).
Note: For WPC solid door frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
215
-
-
... More
Supply and fixing 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain wire mesh shutter (Single or double leaf) of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: Stainless steel wire mesh shall be paid seperately)
95
-
-
... More
Supply and fixing factory made UPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of 'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] area not exceeding 1.00 sqm each complete all as speified and as directed. (Note: The unit rate quoted by contractor excludes cost of glass/ stainless steel wire mesh and includes all other connected accessories. Net opening will be measured for payment purpose.)
281
-
-
... More
S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
200
-
-
... More
S&F for 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty/beading in square n exc 0.5 sq. m in each pane complete all as specified and directed.
105
-
-
... More
S&F for 5 mm thick Figured glass, pin head type and glazing with oil putty/beading in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
15
-
-
... More
Supply and fixing 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter (Single or double leaf) of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.
100
-
-
... More
Supply and fixing factory made 30mm thick plain panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete all as specified and directed.
40
-
-
... More
Supply and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.
133
-
-
... More
Supply and fixing 25mm dia chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete all as specified and as directed.
230
-
-
... More
Supply and fixing ISI marked oxidised M.S. single acting spring hinges of size 100mm with necessary screws etc. complete : (copper oxidized as per IS: 1378) complete all as specified and as directed.
318
-
-
... More
M&L for 40 x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (using 20mm stone aggregate) complete all as specified and as directed.
1080
-
-
... More
Supply and fixing 150 mm size aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and as directed.
492
-
-
... More
Supply and fixing 100 mm size aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and as directed.
414
-
-
... More
Supply and fixing 100x60x2.50 mm, IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete all as specified and as directed.
336
-
-
... More
Supply and fixing 100x63x3.2 mm, ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete all as specified and as directed.
84
-
-
... More
Supply and fixing 200x10 mm size aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and as directed.
274
-
-
... More
Supply and fixing 100x10 mm size aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and as directed.
758
-
-
... More
Supply and fixing 300 x 16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as specified and as directed.
109
-
-
... More
Supply and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and as directed.
221
-
-
... More
M&L for Painting 2 coats with synthetic enamel paint over a coat of red oxide primer of approved brand and manufacture to give an even shade on new steel surfaces complete all as specified all as specified and as directed.
150
-
-
... More
M&L for Painting 2 coats with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade in new wooden surface and applying a coat of ready mixed pink or grey primer having VOC content less than 50 grams/ litre sqm complete all as specified and as directed.
600
-
-
... More
M&L for chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with medium shade pigment using 50% white cement 50% Grey cement to match the shade of tiles, including rubbing and cleaning over and including 20 mm thick bed of cement mortar 1:4 complete all as specified and as directed.
50
-
-
... More
Supply and fixing C.P. brass health faucet with flexible tube upto 1 metre long with necessary fixing arrangement of quality and make complete all as specified and as directed.
4
-
-
... More
Dismantling Asbestos Cement sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of complete all as specified and as directed.
55
-
-
... More
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as direted.
55
-
-
... More
Treatment of sunken floor slab comprises the following specificatons and all as specified :-
(i) M&L for 15mm thick cement plaster 1:3 with liquid WPC s per manufacturers instruction to the bottom as well as the side walls.
(ii) M&L for applying polymeric membrane felt to the sunken portions of the floors, after cleaning the plastered surfaces from all loose materials an a coat of Blown Bitumen 85/25 or 90/15 will be applied @ 1.20Kg/Sqm over a coat of suitable primer applied as per the manufactures instructions. The membrane felt with 90/100 micron HMHDPE centre core and 3kg/Sqm weight shall then be fixed on the coated surfaces of bottom and side walls of the sunken portion. Minimum overlap of 75/80mm shall be maintained at the joints where ever required and the joints bonded completely with torch application . Care shall be taken that no air bubble is left in-between the surface of the floor/wall and the felt.
(iii) Top of the felt shall be treated with layer of Bitumen 85/25 or 90/15 @ 1.20kg/Sqm.
(iv) After the treatment is over, the sunken portions shall be kept full of water for at least one week to check that no seepage is seen from the external surfaces.
15
-
-
... More
M&L for providing and laying in position cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)excluding the cost of centering and shuttering) as in founadtion or mass concrete complete all as specified and as directed.
4.25
-
-
... More
M&L for providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) as in coping, bed blocks, haunching, benching etc., excluding the cost of centering, shuttering and finishing complete all as specified and as directed.
5.25
-
-
... More
M&L for 15mm thick in cement plaster of mix 1:4 (1 cement : 4 fine sand) on brick or concrete surfaces finished even and smooth w/o using extra cement complete all as specified and as directed.
35
-
-
... More
M&L for providing and laying Non Pressure NP-3 class (Medium duty) 450mm dia R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc complete all as specified and as directed.
10
-
-
... More
M&L for providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level (as in saucer drain) complete all as specified and as directed.
15
-
-
... More
Taking down carefully copperlaluminium point wiring (Light Fan, lamp holder, socket or power) complete including taking out unserviceable fitting fixture removingmaterials to store for keeping in safe custody for reuse at site or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
397
-
-
... More
M&L for point wiring with PVC FRLSH insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm for earth continuty wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessary wall cutting ,chiseling etc and making good disturbed surface all as directed and specified.
291
-
-
... More
M&L point Wiring for twin control light point with 1.5 sq.mm FRLSH PVC insulated copper conductor single core cable in & including surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
1
-
-
... More
M&L for sub main wiring for Light/power plug for 05/15 A Independent switch socket board with PVC insulated unsheathed stranded FRLS copper conductor cable of size 2x2.5 Sgmm, with PVC insulated unsheathed stranded FRLSH copper conductor cable of size 1x2.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring including all necessary wall cutting and making good disturbed surface. Note- 3 run of 2.5sqmm cable and 1 run of PVC conduit will be measeured as one unit length.
690
-
-
... More
S& F metal boxes of size 100mm x100mmx 60mm deep of thickness 1.2mm on surface or recess with suitable size of phenolic laminated sheet cover of thickness 3mm in front including painting and making good of good disturbed surfaces
70
-
-
... More
S& F metal boxes of size 150 mm x150mmx 60mm deep of thickness 1.2mm on surface or recess with suitable size of phenolic laminated sheet cover of thickness 3mm in front including painting and making good of good disturbed surfaces
101
-
-
... More
S&F metal boxes of size 250mm x300mmx 60mm deep of thickness 1.2 mm on suface or recess with suitable size of phenolic laminated sheet cover of thickness 3mm in front including painting and making good of good disturbed surfaces
75
-
-
... More
Supply and fxing including connection of switch piano flush button type single pole one way 5 Amps.
296
-
-
... More
Supply and fix 5/6 A, two way switch, piano type ISI marked
2
-
-
... More
Supply and fixing including connection of socket out let 6 Amps 2/3 pin flush type.
5
-
-
... More
S&F Switch Socket combination outlet 3 in 1, 3 pin, 6 Amps flush type 240 Volt.
91
-
-
... More
S&F Switch Socket combination outlet, 3 in 1,3 pin 15/16 amps flush type 240 Volt
10
-
-
... More
S&F Ceiling rose 5A, 3 terminal PVC/poly carbonate isolated body ON existing jucntion box including connectionsets as required
226
-
-
... More
S&F Electronic fan regulator, stepped type 120/280V on existing phenolic laminated sheet complete all as directed by Engineer-in-Charge
65
-
-
... More
Taking down old serviceable Ceiling fan including carrying out servicing and painting one with coat of synthetic enameled paint by spraying including filling cavities with filer, one Coat cleaning all dust etc & writing necessary MES No on the the fan and refixing fan in its own position after completion of necessary ceiling work
65
-
-
... More
M&L rewinding the motor of ceiling / exhaust fan of any make and size with super enamelled copper wire of adequate size/gauge including all insulation materials, varnishing etc complete all as directed by Engineer-in-Charge.
40
-
-
... More
Taking down old serviceable exhaust fan including carrying out servicing and painting one with coat of synthetic enameled paint by spraying including filling cavities with filer, one Coat cleaning all dust etc & writing necessary MES No on the the fan and refixing in its own position after completion of necessary ceiling work
10
-
-
... More
Taking down unserviceable sub main /Sub circuit wiring of any type and size including conduit, batten wiring for necessary repair/replacement.
369
-
-
... More
M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable of size 2 x 4.0 Sqmm and earth continuity conductor of size 1 x 4.0 Sqmm to be drawn into PVC conduit of suitable size conceald wiring including cutting chiseling and making good wall surfaces,. Note- 3 run of 4sqmm cable and 1 run of PVC conduit will be measeured as one unit length.
312
-
-
... More
M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable of size 4 x 4.0 Sqmm and earth continuity conductor of size 2 x 4.0 Sqmm to be drawn into PVC conduit of suitable sizes conceald wiring including cutting chiseling and making good wall surfaces,. Note- 6 run of 4sqmm cable and 1 run of PVC conduit will be measeured as one unit length.
57
-
-
... More
S & F 20 W, 4' surface and wall mounted LED batten with aluminium housing and integrated driver all as specified and directed.
180
-
-
... More
S & F 10 W, 2' surface and wall mounted LED batten with aluminium housing and integrated driver all as specified and directed.
24
-
-
... More
Supply & fixing in repair LED Building security light fitting.new compact designed IP 65, Polycarbonate cover high power of capacity 30 watt including provn of necessary connection complete.
12
-
-
... More
Supply and fixing in repair of GI pipe Bracket of 40 mm dia light grade pipe bend to shape approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed.
12
-
-
... More
Taking down old unserviceable DB of any type and size
11
-
-
... More
Supply and fixing of VTPN DB double door, IK 09, IP43-Metal door, 4 way made of CRCA sheet steel powder coated with bus bar, neutral link, earth bar , MCCB,4 pole as incomer and SP/TP MCBs as outgoings, including taking down old one.
1
-
-
... More
S&F MCCB 4 pole, 125 Amps, for Incomer of VTPN with fixed thermal & magnetic release of breaking capacity 25 kA,415 Volts.
2
-
-
... More
S&F factory made sheet metal enclosure for above MCCB along with all fixing accessories and connection of cables.
1
-
-
... More
S&F horizontal type three pole and neutral sheet steel, MCB distribution board, 415 V. 4 way ( 4 + 12) double door on surfacelrecess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection, powder painted including earthing etc as required ( but without MCB/RCCB/lsolator) including making good disturbed surfaces including taking down old unserviceable, complete all as directed by Engineer-in-Charge.
2
-
-
... More
Supply and fixing of MCB DB double door, made of sheet steel phosphates, powder painted with bus bar, neutral link, earth bar and din rail SPN 12 way with 200 Amps rated bus bar 230 Volts including taking down old one with all acessary complete.
8
-
-
... More
Supply and fixing MCB 3P, 32 Amps, 415 volt 'C' series
2
-
-
... More
Supply and fixing MCB 4P, 32 Amps, 415 volt 'C' series
2
-
-
... More
Supply and fixing MCB SPN, 32 Amps, 240 volt 'C' series
8
-
-
... More
Supply and fixing MCB SP, 6-32 Amps, 240 volt 'C' series
92
-
-
... More
Supply and fix bus bar enclosure with copper busbar of ETP grade 100A, 4way complete all as specified and as directed
1
-
-
... More
M&L for earthing with galvanízed steel earth plate electrode of size 600 mm x 600 mm x 6.0 mm buried directly in ground (earth pit not less than 2 25 Mtr below normal ground level) connected to galvanized earth lead of size 4.Omm by means of bolts, nuts, check nuts and washers of galvanized iron or steel including 20 mm da medium grade GI tubing for protection of earth lead, MS sheet metal funnel wth wire mesh, watering pipe medium grade 20 mm dia, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:36 type C1, 50 mm thick precast RCC (1:2.4) type B1 pit cover reinforced with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including galvanised earth Lead of size 4.0 mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a disance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No. 3 of SSR Pt-l, and all as directed and specified
4
-
-
... More
M&L for Earth continuity conductor or main eathing lead fixed to wall on batten or recess or chases or buried in ground or drwan in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron wire all as specified and directed.
48
-
-
... More
Taking down unserviceable LT U/G cable of any size
95
-
-
... More
Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres complete all as specified and directed by Engr-in-Charge..
14.54
-
-
... More
Supply and lay Common burnt clay F.P.S. (non modular) bricks class designation 10 laid in trenches for LT cable protection with length of brick perpendicular to length of cable complete all as specified and directed by Engr-in-Charge.
0.65
-
-
... More
M&L for Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)complete all as specified and directed by Engr-in-Charge.
1
-
-
... More
Supplying and fixing cable route marker with 10cm X10 cm X5 mm Each 508 thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
Supply, connecting and testing XLPE cable insulated , screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sq mm 3.5 core in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories complete all as specified and directed by Engr-in-Charge.
95
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%