Indian Oil Corporation Limited Tender

Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.

Indian Oil Corporation Limited - IOCL Tender

Works
Civil And Construction
Building Construction
Eprocure
Opening Date14 Aug 2023
Closing Date4 Sep 2023
Tender AmountRefer Documents 
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc : With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. (Chlorpyriphos 20% E.C./Lindane 20% E.C. to be supplied free of cost @ 1.125 Litre per 10 metre).

75

51

43.32

... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. (Chlorpyriphos 20% E.C. / Lindane 20% E.C. to be supplied free of cost @ 5 Litre per 9 Sq metre).

200

294

249.35

... More
Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. (Chlorpyriphos 20% E.C./Lindane 20% E.C. to be supplied free of cost @ 1.7 Litre per 10 metre).

400

41

34.87

... More
Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos / Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. (Chlorpyriphos 20% E.C./Lindane 20% E.C. to be supplied free of cost @ 1.7 Litre per 10 metre).

50

329

278.94

... More
CONCRETE WORK

-

-

-

... More
PLAIN CEMENT CONCRETE (P.C.C ) WORKS

-

-

-

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level :

-

-

-

... More
1:3:6 (1 Cement : 3 coarse sand (Zone-III) deived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources).

25

7938

6727.86

... More
1:4:8 (1 Cement : 4 coarse sand (Zone-III) dervied from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).

8

7502

6358.15

... More
Centring and shuttering including strutting, propping etc. and removal of form work for:

-

-

-

... More
Foundations, footings, bases for columns.

45

369

312.82

... More
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources).

30

542

460.03

... More
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

30

142

120.79

... More
REINFORCED CEMENT CONCRETE (R.C.C) WORKS (Shuttering )

-

-

-

... More
Foundations, footings, bases of columns, etc. for mass concrete.

55

369

312.82

... More
Suspended floors, roofs, landings, balconies and access platform.

425

898

761.11

... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.

400

715

606.26

... More
Stairs, (excluding landings) except spiral-staircases

35

806

683.46

... More
Columns, Pillars, Piers, Abutments, Posts and Struts.

210

950

805.74

... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

40

789

669.14

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level:

-

-

-

... More
Thermo-Mechanically Treated bars.

9150

108

91.7

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level:

-

-

-

... More
Thermo-Mechanically Treated bars.

11500

108

91.7

... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using coarse aggregate as well as fine aggregate derived from natural sources and cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge: Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately.

-

-

-

... More
All works up to plinth level.

49

10363

8782.65

... More
All works above plinth level up to floor V level

93

12182

10324.03

... More
MASONRY WORK

-

-

-

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

-

-

-

... More
Cement mortar 1:6 (1 cement : 6 coarse sand).

25

6871

5823.32

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure mabove plinth level up to floor V level in all shapes and sizes in :

-

-

-

... More
Cement mortar 1:4 (1 cement : 4 coarse sand).

48

10119

8576.14

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level:

-

-

-

... More
Cement mortar 1:3 (1 cement :3 coarse sand).

195

1239

1050.54

... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) - Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron).

125

708

600

... More
STEEL WORK

-

-

-

... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

-

-

-

... More
With float glass panes of 5.50 mm thickness.

30

1679

1423.7

... More
FLOORING

-

-

-

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

40

1335

1131.47

... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved brand and manufacture, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cemet slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clip of required thickenss, levelling system and rubber mallet for placing the tiles gently and easily:

-

-

-

... More
Double charge vitrified tile polished finish of size - Size of Tile 800x1600 mm.

200

2312

1960.07

... More
Glazed vitrified tile Matt/Antiskid finish of size - Size of Tile 800x800 mm.

30

1854

1571.85

... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete:

-

-

-

... More
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

-

-

-

... More
Granite of any colour and shade - Area of slab up to 0.50

8

5465

4631.5

... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately):

-

-

-

... More
Sal wood.

0.5

136491

115670.63

... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

-

-

-

... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

15

3918

3320.91

... More
12 mm cement plaster of mix

-

-

-

... More
1:6 (1 cement: 6 fine sand).

1170

329

279.21

... More
15 mm cement plaster on rough side of single or half brick wall of mix :

-

-

-

... More
1:6 (1 cement: 6 fine sand).

620

379

321.61

... More
6 mm cement plaster of mix : - 1:3 (1 cement: 3 fine sand).

190

294

249.67

... More
Neat cement punning.

110

81

68.91

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

1900

149

126.45

... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :

-

-

-

... More
Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm

1900

184

156.16

... More
Painting wood work with Deluxe Multi Surface Paint of required shade - Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10sqm of approved brand or manufacture

20

168

143.03

... More
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality).

10

594

503.57

... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete

10

138

117.17

... More
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :

-

-

-

... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : anodised (anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

-

-

-

... More
200x10 mm.

10

78

66.49

... More
100x10 mm.

10

50

42.49

... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture,including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle,lock and stopper etc.to be paid separately).

10

5763

4884.69

... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sq.m., both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross 'T' of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main 'T' at 600 mm center to center to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia. and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised butterfly level clips of size 85x30x0.8 mm spaced at 1200 mm center to center along main 'T', bottom exposed width of 24 mm of all 'T'-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by the Engineer-in-Charge :

-

-

-

... More
12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS:2095 (Part-1), of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm center to center with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.

170

1518

1286.54

... More
Providing and fixing in position FRAMELESS glass partition with 12mm thk toughned glass of saint gobian/Pilinkton/Modiguard make fixed to floor and sofit of ceiling/false ceiling rigidly and at centres wherever required in line and level with SS patch fittings of DORMA/OZONE/HAFELLE make with all enabling works complete as per drawing and direction of EIC

3

5763

4884.69

... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) After surface preparation, first layer of slurry of cement @ 0.488 Kg/sqm mixed with water proofing cement compound @ 0.253 Kg/sqm. (b) Laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 Kg/sqm mixed with water proofing cement compound @ 0.670 Kg/sqm and coarse sand @ 1.289 Kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) Fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the purpose of measurement the entire treated surface will be measured.

15

677

574.41

... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

-

-

-

... More
W.C. Pan with ISI marked white solid plastic seat and lid.

2

6817

5777.58

... More
Providing and fixing wash basin with C.I. brackets, 15mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required - White Vitreous China Wash basin size 550x440mm with a 15mm CP brass single hole basin mixer.

2

3689

3126.47

... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

2

1144

969.76

... More
Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

2

1662

1409.04

... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink:

-

-

-

... More
Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms.

5

451

382.82

... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 - 15 mm nominal bore. 88 gms.

2

151

127.99

... More
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms.

2

205

174.11

... More
Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms.

5

295

250.6

... More
One urinal basin with 5 litre white P.V.C. automatic flushing cistern

2

6456

5471.52

... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. - 15 mm nominal bore.

10

801

679.56

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Single socketed pipes:

-

-

-

... More
110 mm diameter.

10

395

335

... More
Providing & fixing Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 563 or approved equivalent) and Health Faucet with flexible tube 8mm diameter x 1.5 m long (Ref. Make: JAQUAR, Model: Cat. No. 549 or approved equivalent).

2

3635

3080.75

... More
Constructing Brick Masonary catch pit in cement mortar 1:4 (1 cement : 4 coarse sand) including necessary excavation, 200mm thick foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm size) and inside and top plastering (15mm thick) with cement mortar 1:4 (1 cement : 4 coarse sand) finished with a floating coat of neat cement making necessary connections to drains inclusive of all labour, material, equipment, etc., all complete as per drawing, specifications and directions of the Engineer-in-Charge :

-

-

-

... More
600mm x 600mm x depth up to 750mm inner dimensions

1

15637

13252.43

... More
WATER SUPPLY

-

-

-

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge.Internal work -Exposed on wall

-

-

-

... More
EXTERNAL WORK

-

-

-

... More
15 mm dia nominal bore

10

262

222.77

... More
20 mm dia nominal bore

10

328

278.61

... More
25 mm dia nominal bore

10

423

358.72

... More
40 mm dia nominal bore

10

695

589.45

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in charge. Concealed work including cutting charges and making good the wall

-

-

-

... More
15 mm dia nominal bore

5

530

449.88

... More
20 mm dia nominal bore

10

619

525.1

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):

-

-

-

... More
25 mm nominal bore

2

644

545.97

... More
32 mm nominal bore

2

753

638.32

... More
SEWAGE AND DRAINAGE

-

-

-

... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. - With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

1

32758

27761.19

... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete (Cement shall be free issue material):

-

-

-

... More
150 mm diameter.

5

648

549.31

... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design (Cement shall be free issue material):

-

-

-

... More
100 mm diameter S.W. pipe.

5

1058

897.23

... More
SOIL PIPE AND FITTINGS

-

-

-

... More
Providing and fixing soil, waste and vent pipes :

-

-

-

... More
100 mm dia - Sand cast iron S&S pipe as per IS: 1729.

2

1306

1107.2

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

-

-

-

... More
Coupler - 110 mm.

2

152

129.37

... More
Single tee with door - 110x110x110 mm.

5

263

223.26

... More
Single tee without door - 110x110x110 mm.

2

244

207.06

... More
Bend 87.5° - 110 mm bend.

5

168

142.59

... More
Shoe (Plain) - 110 mm Shoe.

5

147

124.97

... More
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete:

-

-

-

... More
110 mm

2

374

317.16

... More
Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms.

5

130

110.31

... More
Providing and fixing square-mouth S.W. gully trap class SP 1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design

-

-

-

... More
100x100 mm size P type - With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

1

3003

2544.97

... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

2000

11

9.66

... More
Supplying following way,horizontal type,TPN, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnections, powder painted etc. as required. (But without MCB/RCCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 with provision for 1 no. 4 pole MCB & 1 no. 4 pole ELCB/RCCB incomer and as per direction of Engineer-in-Charge. (8 +18) 6 Way TPN DB Horizontal double door with IP 54

1

13140

11135.97

... More
Supplying following way,single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnections, powder paintedetc. as required. (But without MCB/RCCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 and as per direction of Engineer-in-Charge.12 way (2+2+10), SPN, double door, MCB DB, IP-54

2

6195

5250.64

... More
Supplying following way,horizontal type,TPN, sheetsteel, MCB distribution board, 415 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth, bar, din bar, interconnections, powder painted etc. as required. (But without MCB/RCCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 with provision for 1 no. 4 pole MCB & 1 no. 4 pole ELCB/RCCB incomer and as per direction of Engineer-in-Charge. (8 +18) 6 Way TPN DB Horizontal double door with IP 54

1

13140

11135.97

... More
Supplying and fixing 5 amps. To 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'C' curve, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked MCBs of Havells / Loadster / Indo Kopp or equivalent make shall be used as per direction of Engineer in-Charge. Triple pole and netural

4

1482

1256.67

... More
Supplying and fixing 5 amps. To 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'C' curve, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked MCBs of Havells / Loadster / Indo Kopp or equivalent make shall be used as per direction of Engineer in-Charge. Single pole

30

259

220.03

... More
Supplying and fixing following rating, four pole, (three phase and neutral) 415 volts, residual current circuit breaker (RCCB), ISI marked, having a sensitivity current upto indicated milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked RCCB shall be use 63 Amp, 4 Pole RCCB, 100mA

1

3243

2748.53

... More
Supplying and fixing following rating, four pole, (three phase and neutral) 415 volts, residual current circuit breaker (RCCB), ISI marked, having a sensitivity current upto indicated milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked RCCB shall be use 40 Amp, 4 Pole RCCB, 30mA

4

2935

2487.89

... More
Supply, fixing and connection of 250 V below given mosaic wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. 6 pin 25 A modular type socket lSI Marked

10

234

199.13

... More
Supply, fixing and connection of 250 V below given mosaic wiring accessories of M/s MDS or approved equivalent inlcuding supplying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge. 16 amps. - 3 pins - 3 module switch socket

20

881

747.12

... More
Supply, fixing and connection of Philips/approved equivalent make LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F 0.9, SurGE-Venture protection: 2KV, THD10% with high power LED's having efficacy of 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete including supply & fixing of lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge.15W

14

2416

2048.22

... More
Supply, fixing and connection of Philips/approved equivalent make LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F 0.9, SurGE-Venture protection: 2KV, THD10% with high power LED's having efficacy of 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI 70,Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete including supply & fixing of lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge.18W

51

2580

2187.08

... More
Supply, fixing and connection of Philips/approved equivalent make LED COB Down lighter, suitable for Recessed mounting made of presssure diecast alluminium housing with powder coating, with high efficiency reflector , operating voltage range of 150 to 265 Volts AC, P.F 0.9, Surge protection: 2KV, THD10% with high power LED's having efficacy of 120 lumins/watt,CCT: 3000K - 5700K, minimum CRI70, .etc., complete including supply & fixing of lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge.15W

10

2867

2430.1

... More
Supply of below given M/s Philips or equivalent make lamps for installation in lighting fittings / fixtures as per directions of EIC. Tube Light 18W

20

403

342.18

... More
Installation, testing and commissioning of exhaust fans of following sweeps including making the hole to suit the size of the above fan, making good the damage, connections, testing, commissioning etc. as required. Exhaust fan more than 450 mm but upto 510 mm sweep.

5

1664

1410.28

... More
Supplying and drawing following size of FRLS PVC insulated, copper conductor, single core cable in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required. Note: Only ISI marked cables shall be used. 2 x 2.5 sq.mm

300

69

58.97

... More
Supplying and drawing following size of FRLS PVC insulated, copper conductor, single core cable in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required. Note: Only ISI marked cables shall be used.2 x4 sq.mm

300

107

91.45

... More
Supplying and drawing following size of FRLS PVC insulated, copper conductor, single core cable in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required. Note: Only ISI marked cables shall be used.2 x6 sq.mm

300

153

129.92

... More
Providing earthing electrode as per IS: 3043 standard /drawing / specifications with following sizes medium quality, Class-B, ITC/KT/Jindal make GI pipe fabricated as per the standard drawing and driven in the earth pit filled up with charcoal or coke dust mixed with salt clay (salt 0.5%) including providing inspection chamber as per the drawing with removable RCC (1:2:4) cover, earth, excavation, back filling, masonry work etc. all complete with labour and materials as per the direction of Engineer- in-Charge. Charcoal and salt cost will be paid seperately as extra. mm dia 3 metre long set

6

3764

3190.11

... More
96 kg charcoal and 5 kg salt set

6

1426

1208.95



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.