Works Department Tender

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed from or slip from paver,spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints,joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing and as per clause 602 of MoSRT&H Specification for Road & Bridge works (5th Revision)& including cost of all materials, labour, T&P, taxes, royalty etc complete in all respect and as per direction of the Engineer-in-charge.

Earth work in excavation in soil for road works with hydraulic excavator of 0.9 Cum bucket capacity including cutting and loading in tippers as per drawing and technical specification, including setting out, dressing of section to correct line, level, grade & camber and loading into tippers, transporting to embankment site within all lifts and lead upto 1000mtr. and utilising the surplus earth locally for road work wherever required, backfilling the excavation earth to the extent required complete in all respect as per clause 301 of Specification for road & bridge work of MORT&H (5th Revision) & as per Direction of Engineer in charge.

Construction of embankment with approved materials obtained from borrow pits with all lifts and leads transporting to site, grading to required slope and compacting to meet requirement of table 300-2 as per Clause No.305 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5th Revision) & including cost of all materials, labour, T&P, royalty etc complete in all respect and as per direction of the Engineer-in-charge.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from foundation of CD & structures graded and compacted to meet requirement of table 300-2 as per approved Drawing & Technical Specifications and as per Clause -305 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing and laying Steel reinforcement works in structure using HYSD (uncoated reinforcement bars of Fe-500 grade) as per approved Drawing & Technical Specifications and as per Section -1600 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance & other taxes of materials, cost of labour, T&P etc complete.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting , 1.5 mm thick supported on a 2.85 metre long mild steel angle iron post 75 mm X 75 mm X 6 mm firmly fixed to the ground by means of proporly designed foundation with M-15 grade cement concrete 45 cm X 45 cm X 60 cm, 60 cm below ground level as per approved drawing & Technical Specifications and as per the direction of the Engineer-in-Charge.

a) 90 cm equilateral triangle

b) 80 mm x 60 mm rectangular

c) 60 cm circular

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes as per Technical Specifications and as per Clause - 803.4 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Painting on concrete surface with one coats of water bound or wall primer to concrete surface of approved shade for finished item of work including cost, conveyance & other taxes of materials, cost of labour, T&P etc complete as per the direction of the Engineer-in-charge.

Providing & erecting a "W" metal beam crash barrier comprising of 3mm thick corrugated steel metal beam rail, 70cm above road/ ground level fixed ISMC series channel vertical post 150mm x 75mm x 5mm spaced 2m centre to centre, 1.8m high, 1.1m below ground / road level, all steel part & filments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixedon the vertical post with a spacer of channel section 150mm x 75mm x 5mm, 330mm long complete as per clause-811 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Earth work in excavation of foundation of retaining wall and other structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work complete in all respect as per clause No 304 and section 900 of specification for road & bridge works of Ministry Of Road Transport & Highways ( 5th Revision ) & including cost of all materials, labour, T&P, taxes, royalty etc complete in all respect and as per direction of the Engineer-in-charge.

Sand filling in Road work & foundation of structure as per approved Drawing & Technical Specifications and as per Section - 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, T&P etc complete.

Providing and laying P.C.C. M-15 Grade in foundation bed as levelling course using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

R.C.C. M-20 grade in Foundation raft of structure with formwork using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

Providing and laying R.C.C. M-20 grade in substructure of RCC retaining wall with formwork using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2200 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

Providing Weep Holes of 100mm dia using A.C./ PVC pipe including fixing with cement mortar as per approved Drawing & Technical Specifications and as per Clause -2706 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, T&P etc complete.

Painting on concrete surface with two coats cement paint of approved shade for finished item of work including cost, conveyance & other taxes of materials, cost of labour, T&P etc complete as per the direction of the Engineer-in-charge.

Providing and laying R.C.C. M-20 grade in substructure of RCC Drain wall with formwork using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2200 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

Providing and laying R.C.C. M-30 grade in Slab of RCC Drain with formwork using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2300 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

Providing and laying RRHG stone masonary with sand grouted in F&P.including cost conveyance of all materials, labour t&Prequired with all taxes, royalties etc. complete as per specification and direction of the EIC.

Providing and laying P.C.C. M-15 Grade in foundation of Culvert with formwork using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

Providing and laying R.C.C. M-20 grade in substructure of RCC Culvert with formwork using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2200 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

Providing and laying R.C.C. M-30 grade in Superstructure of Culvert with formwork using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2300 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

Providing and laying R.C.C. M-20 grade in Road Parapet and Wing wall of RCC Culvert with formwork using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2200 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

R.C.C. M-30 grade in wearing coat in C.D. work with form work using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section -1500, 1600, 1700 & 2700 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

Providing and laying Filter Media with crushed stone aggregates of 45mm size satisfying requirements laid down in as per approved Drawing & Technical Specifications and Clause 2504.2.2 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

Painting two coats with enamel paint over a coat of primer of approved shade for finished item of work as per the direction of Engineer-in-Charge including cost, conveyance, royality & other taxes of materials, cost of labour, T&P etc complete.