Bhubaneswar Smart City Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Bhubaneswar Smart City Limited - BSCL Tender
Opening Date10 Aug 2018
Closing Date19 Sep 2018
Tender Amount₹ 5,70,81,989
Costs
EMD
₹ 6,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_BSCL_48564_1Tender No
Bid Identification No. 4170/ BSCL/239/2017Tender Authority
Bhubaneswar Smart City Limited ViewPurchaser Address
-Website
http://https://www.smartcitybhubaneswar.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Mumty
14.16
12212
-
... More
Dismantling and removing of RCC column,beams,slab,staircase,landing,lintels include stacking the useful materials for reuse and removing the debris within 50m lead.as directed by Engineer-in-Charge.
-
-
-
... More
ground to 1st floor
41.27
33693
-
... More
1st to 2nd floor
41.27
35378
-
... More
Mumty
7.53
6777
-
... More
Earth work excavation of foundation in all kinds of soil with in 59m initial lead and 1.50m initial lift including rough dressing breaking clods maximum 5cm to 7 cm & laying in layers not exceding 0.3m depth for the work complete as directed by incharge.
-
-
-
... More
Upto 1.5m depth
1415.91
209611
-
... More
1.5 to 3m depth
1743.14
276671
-
... More
3 to 4.5m depth
114.85
19455
-
... More
Filling in foundation and plinth with excavated materials including watering,ramming all type of soil as directed by engineer in charge.
687.74
56559
-
... More
Carriage of surplus earth and debrisis by mechanical means.(within 5.00 Km. lead)
2837.83
429079
-
... More
Supplying and filling in foundation trenches and plinth with sand well watered and rammed in layers not exceeding 23cm in depth with all lead and lift including cost, conveyance, royalties, taxes of the material, cost of all labour, T&P etc., required for the work complete in all respect as directed by the Engineer-in-Charge.
94.37
30265
-
... More
Providing and applying of Antitermite treatment before construction at different stage required as per specification and the holes should be pluged with filling materials including cost of all materials, labour charges, conveyance and all taxes, hire charges of machinaries etc. complete as per code IS-6813( part I & part II) & direction of Engineer-in-charge.
81
9697
-
... More
Providing Plain Cement concrete PCC (1:3:6) below raft, ramp using 40 mm nominal size Graded hard crusher broken granite stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including labour, curing complete as directed by Engineer-in-Charge. IS 456-2000
75.12
277974
-
... More
R.C.C. work of M-30 in following works using 12 mm. to 20 mm. size (20 mm. not less than 50%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing and finishing the exposed surfaces smooth with cost,centering & shuttering charges, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of Tor steel and binding wire of 18 to 20 gauge, labour and for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per IS 456-2000 & the direction of the Engineer-in-charge.
-
-
-
... More
upto &GF floor
-
-
-
... More
Raft
338.03
1780745
-
... More
Plinth/Tie Beam
77.23
582565
-
... More
Column & Beam
128.22
1217251
-
... More
Roof Slab
172.53
1492103
-
... More
Staircase
12.97
131561
-
... More
RCC wall
118.09
1044315
-
... More
1st floor
-
-
-
... More
Column & Beam
73.76
788912
-
... More
Roof Slab
87.32
843932
-
... More
Staircase
3.88
44575
-
... More
RCC wall
8.42
83380
-
... More
2nd floor
-
-
-
... More
Column & Beam
74.04
902319
-
... More
Roof Slab
87.32
953954
-
... More
Staircase
3.88
51052
-
... More
RCC wall
8.42
94439
-
... More
3rd floor
-
-
-
... More
Column & Beam
72.06
1006892
-
... More
Roof Slab
68.64
853424
-
... More
Staircase
3.88
58810
-
... More
RCC wall
8.42
107680
-
... More
3rd floor slab top to mumty
-
-
-
... More
Column & Beam
10.31
166118
-
... More
Roof Slab
8.83
125736
-
... More
RCC wall
5.76
84509
-
... More
Supplying Cutting, straightening or bent up Fe-500D tor steel of primary steel producers such as SAIL / Tiscon / RINL (VIZAG STEEL)/ (grade Fe-500D) etc.as per IS 1786 including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of tor steel and binding wires of 18 to 20 gauge (IS-280) and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
upto &GF floor
1639.19
10652276
-
... More
1st floor
316.15
2059559
-
... More
2nd floor
271.44
1772856
-
... More
3rd floor
250.16
1638272
-
... More
terrace floor & Mumty
43.57
286141
-
... More
Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing and scaffolding after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Basement to PL
9.83
33828
-
... More
Aerated autoclaved fly ash bricks/masonary in filler/inside walls using AAC blocks of size 625mm*225mm*200mm having compressive strength not less than 4N/mm2 conforming to IS:2185 (part-3) -2005 and IS:6441-1972 in cement mortar of mix(1:6) and screened and washed sand for mortar for use in superstructure including splays cutting circular moulding,corbeling,chamfering and similar such type of works,watering and curing etc.including cost,conveyance,royalty,loading,unloading and taxes of all materials cost of labour scaffolding,sundries,T&P required for the works etc.complete in all respect as directed by the Engineer-in-charge.
-
-
-
... More
Ground Floor
48.75
198006
-
... More
1st floor
111.21
456239
-
... More
2nd floor
94.68
392865
-
... More
3rd floor
66.36
278930
-
... More
terrace to mummty
17.41
74258
-
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:6) on brickwork inclding watering, curing,scaffoding, cost, conveyance,royalities,taxes of all materials to worksite etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
upto plinth Level
104.4
10022
-
... More
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on brickwork inclding watering, curing,scaffoding, cost, conveyance,royalities,taxes of all materials to worksite etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Ground floor
278.87
24958
-
... More
1st floor
643.62
59084
-
... More
2nd floor
522
49120
-
... More
3rd floor
350.56
33793
-
... More
Mumty
82.15
8124
-
... More
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering,scaffoding and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Upto plinth level
104.4
14375
-
... More
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on brickwork inclding watering, curing,scaffoding, cost, conveyance,royalities,taxes of all materials to worksite etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Ground floor
278.87
24958
-
... More
1st floor
643.62
59084
-
... More
2nd floor
522
49120
-
... More
3rd floor
350.56
33793
-
... More
Mumty
82.15
8124
-
... More
Providing Cement washing one coat including watering,scaffoding, curing, cost all materials, labour and T&P etc complete as per requirement as directed by Engineer-in-Charge
-
-
-
... More
upto &GF floor
798.03
8379
-
... More
1st floor
1358.38
14398
-
... More
2nd floor
1095.23
11828
-
... More
3rd floor
739.55
8112
-
... More
terrace floor with mumty
171.32
1906
-
... More
Finishing plastered surfaces of walls with Cement based Putty & making smooth to receive painting including cost of Putty as per requirement as directed by Engineer-in-Charge
-
-
-
... More
upto &GF floor
998
57983
-
... More
1st floor
1935.46
114192
-
... More
2nd floor
1684.66
100911
-
... More
3rd floor
1201.95
73198
-
... More
terrace floor & Mumty
171.32
10604
-
... More
Priming one coat with any approved primer including cost of material & labour as per requirement as directed by Engineer-in-Charge
-
-
-
... More
upto &GF floor
350.35
14784
-
... More
1st floor
643.62
27740
-
... More
2nd floor
522
23020
-
... More
3rd floor
350.56
15810
-
... More
terrace floor
82.15
3795
-
... More
Providing Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX /JOHNSON or equivalent to make an even finished surface over a coat of primer with water bond cement primer and cost of primer included in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete as per the direction of Engineer-in-Charge.
-
-
-
... More
upto &GF floor
350.35
34912
-
... More
1st floor
643.62
65391
-
... More
2nd floor
522
54131
-
... More
3rd floor
350.56
37089
-
... More
terrace floor & Mumty
82.15
8872
-
... More
Providing Two Coat enamel paint over a one coat of Priming to grills in front of window works with any approved quality of enamel paint and primer including cost of material & labour as per requirement as directed by Engineer-in-Charge
-
-
-
... More
upto &GF floor
180.6
24471
-
... More
1st floor
23.87
3310
-
... More
2nd floor
27.63
3923
-
... More
3rd floor
25.02
3639
-
... More
Providing two coat of plastic enamel paint with one coat of primer to wall with approved shade on new work to give an even shade including cost of plastic enamel paint and prime including cost of all materials, labour, conveyance, T&P etc complete as per the direction of Engineer-in-Charge.
-
-
-
... More
upto &GF floor
998
61606
-
... More
1st floor
1935.46
121546
-
... More
2nd floor
1684.66
107481
-
... More
3rd floor
1201.95
78030
-
... More
terrace floor & mumty
171.32
11315
-
... More
Providing, fitting and fixing Kota of thickness 20 to 25 mm tiles in all floors and steps and landing including cost of all materials, labour & T&P etc complete on 25mm thick bed of cement morter 1:1 as directed by Engineer-in-Charge.
-
-
-
... More
Basement to GF floor
32.68
26063
-
... More
GF to 1st
99.63
79459
-
... More
1st to 2nd floor
63.68
51689
-
... More
2nd to 3rd floor
63.68
52637
-
... More
3rd floor to terrace floor & mumty
40.69
34273
-
... More
Providing 2.5cm artificial stone flooring with cement concrete (1:2:4) including punning using 12mm size crusher broken granite chips. With all material cost, conveyance, T&P etc complete as per the direction of Engineer-in-Charge.
-
-
-
... More
Ground Floor to 1st Floor
261.62
59662
-
... More
Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.(Over 5th floor)
-
-
-
... More
terrace floor & mumty
374.37
117439
-
... More
Supply, Fitting and fixing of vertified tiles (Size 600mm X 600mm) (Border Wall Tile - (Make -Johnson / Khajaria/Somali) of approved make laid on 20mm thick cement mortar (1:4) (1 cement :4 Course sand) and filling joints with white cement of approved quality including cost, conveyance, taxes, cost of all labour etc., complete.as directed by Engineer-in-Charge.
-
-
-
... More
Ground floor
188.22
147780
-
... More
1st floor
567.95
449532
-
... More
2nd floor
567.95
453337
-
... More
3rd floor
491.87
396102
-
... More
Supply, Fitting and fixing of ceramic tiles with approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement :4 Course sand) and filling joints with white cement of approved quality including cost, conveyance, taxes, cost of all labour etc., complete.as directed by Engineer-in-Charge.
-
-
-
... More
Ground Floor to 1st Floor
21.8
12787
-
... More
For 1st Floor to 2nd Floor
113.43
67252
-
... More
For 2nd Floor to 3rd Floor
48.14
28864
-
... More
For 3rd Floor to terrace
48.14
29206
-
... More
Fixing granite tiles of above 0.4 Sqm of 20 mm thick in treads and raise of steps in stair case and dado side of the steps of thickness 150 mm over a 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc., complete.as directed by Engineer-in-Charge
-
-
-
... More
Ground Floor to 1st Floor
0.9
2094
-
... More
For 1st Floor to 2nd Floor
6.12
14329
-
... More
For 2nd Floor to 3rd Floor
2.52
5937
-
... More
For 3rd Floor to terrace & mumty
2.52
5977
-
... More
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the ceiling in all heights including watering, curing and scaffloding rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground floor
261.62
28105
-
... More
1st floor
577.08
63478
-
... More
2nd floor
589.42
66427
-
... More
3rd floor
462.41
53408
-
... More
Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section 9221 and 6mm plain glass in top portion with 9mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc.complete.as directed by Engineer-in-Charge
115
641351
-
... More
Supplying, fitting & fixing in all floors in front of aluminim Windows of M.S. grills with top and bottom rails as per approved drawing and design with cost of all materials & labour, taxes, labour cess, T&P, sundries etc. complete in all respect as per specification & approved drawing/ as per direction of Engineer-in-Charge.
1616.76
94224
-
... More
Supplying, fitting & fixing in all floors in M.S. grills gate with as per approved drawing and design with cost of all materials & labour, taxes, labour cess, T&P, sundries etc. complete in all respect as per specification & approved drawing/ as per direction of Engineer-in-Charge.
4770
285436
-
... More
Providing fitting and fixing up fixed window -6 (as per plan of this building) by using OEL aluminum anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as Tapered clip for fixing up 5mm thick Acrylic sheet and jointing angle No. 1855 etc.as directed by Engineer-in-Charge
140.8
394691
-
... More
Providing fitting, fixing of Al. window/door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc.complete.as directed by Engineer-in-Charge
125.83
500480
-
... More
Supplying and fixing W.I clamps 33cm to 38cm long of 35mm x 5mm size for doors and windows and ventilators including fixing in cement concrete (1:3:6) with 12mm, to 20mm hard stone chips or in cement mortar (1:3) including cost of all materials.as directed by Engineer-in-Charge
310
6169
-
... More
Construction of granular sub-base providing close coarse grade granular sub-base material as per table -100-1, spreading in uniform layers with motor grader not exceeding 225mm thick on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per clause 401 of MOSRT&H pecifications for Road & Bridges work (Latest Revision) and as per direction of Engineer-in-Charge
97.84
133179
-
... More
Providing and laying factory made chamfered edge 60 mm Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge:
391.36
245539
-
... More
Supplying, fitting and fixing of Stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x2 mm @ 0.90 mtr. c/c and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance , taxes of all materials, labour, T & P etc.required for the work complete as directed by the Enginee-in-Charge
419.14
117694
-
... More
Grassing with evergreen bermuda/Selection 1 carpet grass, 40 to 50 mm thick. Weed free with mechanized cutting of sods for installation, including watering and maintenance of lawn to be done till the grass forms a thick lawn, free from weeds, with final levelling to ensure it is fit for mowing.
75
187500
-
... More
Supply,fitting, fixing and installation factory made single leaf rigid FRP composite door shutter of 32mm thick,laminated with GRP with wood grain finished.fabricated using UV stabilizesd Isopathelic gal coat and 1 layers of 450 gsm E glass chopped strand mat(CSM),inpregnated with orthopathelic polyster resign including fitting of all fixture like hinges,tower bolt,handle,aldrop etc with cost convancy and txes of all material and labour etc complete. as directed by Engineer-in-Charge
18.9
67321
-
... More
Supply,fitting, fixing of FRP door frame of size 75mm x 100mm including drilling holes in machinary wall with cost of all materials rawl plug,screws,taxes of all material and labour etc complete. as directed by Engineer-in-Charge
68.4
38044
-
... More
Part-II Electrical Works
-
-
-
... More
Internal Electrification
-
-
-
... More
Circuit Cum Wiring
-
-
-
... More
Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 2 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required and as per direction of Engineer-in-charge.
-
-
-
... More
Single light point controlled by one 6A switch or first light point of group control.
272
150960
-
... More
Subsequent point of group control
160
47520
-
... More
Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 2 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required and as per direction of Engineer-in-charge.(Excluding rate of MCB)
-
-
-
... More
Single light point controlled by one 6A MCB or first light point of group control.
36
21528
-
... More
Subsequent point of group control
58
17284
-
... More
Supplying and fixing two module steeped type electronic fan regulator with proper modular plate switch box including connections etc. as required and as per direction of Engineer-in-charge..
65
29315
-
... More
Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on existing board as per direction of Engineer-in-charge.
45
16830
-
... More
Supplying & fixing suitable size GI Box with modular plate and cover in front on surface or in recess, including providing and fixing 3pin 5/6 amps modular socket outlet and 5/6 amps modular switch etc. as required and as per direction of Engineer-in-charge.
60
22440
-
... More
Supplying & fixing suitable size GI Box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos 3pin 5/6 amps modular socket outlet and 2 nos 5/6 amps modular switch etc. as required and as per direction of Engineer-in-charge.
78
51168
-
... More
Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards consisting of a 16 Amp clip-in type modular switch with indicator and a 6/16 Amp clip-in type modular shuttered plug socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge.
76
38608
-
... More
Supplying, installation, testing & commissioning of 20 Amp AC starter switch with 20 Amp modular socket outlet on surface or in recess, on 2 Nos two module GI box with plate etc. complete with direction of Engineer-in-charge.Starter-crabtree(cat no-ACT0202504) or equivalent and as per direction of Engineer-in-charge.
52
69160
-
... More
Wiring for circuit/ submain wiring along with earth wire of following size of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit(included) laid in surface/ recess as required and as per direction of Engineer-in-charge.
-
-
-
... More
2X2.5 + 1X2.5 sqmm FRLS Cu wire
2200
211200
-
... More
2X4 + 1X4 sqmm FRLS Cu wire
2400
290400
-
... More
2X6 + 1X6 sqmm FRLS Cu wire
700
107100
-
... More
4X10 + 2X6 sqmm FRLS Cu wire
800
320800
-
... More
Fan & Fixtures
-
-
-
... More
Supply, delivery and fixing of Ceiling fan hook box made out of 18 swg GI sheet and containing 10 mm dia round ms bar projecting atleast 150mm on either side & duly bent to accommodate ceiling fan down rod bolt & having earthing arrangement as per direction of Engineer-in-charge.
65
7800
-
... More
Supplying, installation, testing and commissioning following type of light fixtures with dummy box for surface mounted fixtures only, fans and exhaust fans with all accessories, as required and as per direction of Engineer-in-charge.(The colour temprature for fixtures shall be between 3500 deg K & white in colour as per application)
-
-
-
... More
Retail Down type LED Light surface fitting (1200 Lumen/ 12W) similar to PHILIPS (CAT No:SM250C LED12S-6500 PSU WH) / Equivalent of Crompton/ Wipro.
22
25784
-
... More
Retail Down type LED Light surface fitting (2000 Lumen/ 18 W) similar to PHILIPS (CAT No:SM251C LED20S-6500 PSU WH) / Equivalent of Crompton/ Wipro.
98
177674
-
... More
Indoor Industrial type LED Light wall/surface fitting (2000 Lumen/ 20 W) similar to PHILIPS (CAT No:BN21C LED20S-6500 PSU CDL GR) / Equivalent of Crompton/ Wipro.
34
28764
-
... More
Indoor Industrial type LED Light wall/surface fitting (4000 Lumen/ 40 W) similar to PHILIPS (CAT No:BN100C LED40S-6500 PSU L120 GR) / Equivalent of Crompton/ Wipro.
60
126060
-
... More
Intelligent office lighting system type LED Light wall/surface fitting with inbuilt sensors (3600 Lumen/ 36 W) similar to PHILIPS (CAT No:RC383B LED36S-6500 PSU OD WH PIR) / Equivalent of Crompton/ Wipro.
160
845280
-
... More
Endura type 700 Lumen/10W LED Bulkhead wall fitting PHILIPS (CAT No:WT140W LED7S CW PSU S1 PC)/ Equivalent of Crompto/ Wipro.
40
39400
-
... More
Supplying, installation, testing and commissioning of ceiling fan (5 star rating) including wiring the down rod, earthing etc as required and as per direction of Engineer-in-charge. (Make : Usha/ Crompton/ Orient/ Khaitan/ Havells).
-
-
-
... More
1200 mm sweep
65
140790
-
... More
Supplying, installation, testing and commissioning of wall mounted fan (5 star rating) including earthing etc as required and as per direction of Engineer-in-charge. (Make : Usha/ Crompton/ Orient/ Khaitan/ Havells).
-
-
-
... More
400 mm sweep 1300 RPM
18
51822
-
... More
Supplying, installation, testing and commissioning of Exhaust fan (5 star rating) including louvres, Ceiling Rose & Electric Connection as required and as per direction of Engineer-in-charge. (Make : Usha/ Crompton/ Orient/ Khaitan/ Havells)
-
-
-
... More
300mm sweep 900 RPM
20
34580
-
... More
Panels, MDBs, DBs. MCBs
-
-
-
... More
Supply, installation, testing and commissioning of cubicle type sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, wiring with space heater, thermostat and control MCBs shall be provided for all vertical sections of main LT Panel, all hinged door shall be earthed through 2.5 sq mm tinned braided, the incoming and outgoing feeders shall be accommodated in a modular arrangement, detachable gland plates, adequate size cable alley, Sign writing, Painting, Earthing, Numbering, Danger plate, including PVC insulated copper FRLS wires of minimum 1.5 sq.mm & 2.5 sq.mm for CT's etc. with all accessories including interconnections, earth bus etc as required and as per direction of Engineer-in-charge.
-
-
-
... More
Main LT cum AMF Panel
-
-
-
... More
Busbar -400 Amp Al busbar with SC rating of 25 KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply.
-
-
-
... More
Two (2) -Nos Incomer : one from 160 KVA CSS & other from 125 KVA DG Set each comprising of
-
-
-
... More
One (1) - 250 Amp FP, 25 KA, MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 200/5 A 10VA Cl 1.0 CTs, Digital Voltmeter, Ammeter With S/S.
-
-
-
... More
One (1) - 360A FP, 25 KA Contactor with microprocessor controlled OL/ SC and EFreleases, shunt trip release, under voltage release with definite time, auxilliary contactor and terminals taken out suitable for termination Mechanical & Electrical interlocking as required.
-
-
-
... More
One set - Indicating lamp for ON/OFF/Trip and Phase indication with control fuse/ MCB.
-
-
-
... More
One(1)- Trip Push Button with Indicating Lamp.
-
-
-
... More
One(1) - Multifunction digital meter suitable for three phase four wire system for reading Voltage, Current, pf. KW, KWH, KVA, KVAr, KVAh, KVArHr.
-
-
-
... More
1 Set of APFCR with 1 set of dual core CT of 200 /5 A Class 1.0 .
-
-
-
... More
Manual Change Over Switch
-
-
-
... More
1 No. 100 A Manual Change Over Switch , operating Handle with other required accessories & interconnections complete in all respects as required.
-
-
-
... More
Two(2) - Outgoing Feeders for (1 No Fire Fighting Panel & 1 No Spare) each Comprising of
-
-
-
... More
One (1) -160A TPN 25KA MCCB
-
-
-
... More
One(1) set of – 160/5A , 15VA , C1 1.0, CT
-
-
-
... More
One (1) - 3 Ph Digital Ammeter.
-
-
-
... More
One Set ON/OFF Indicating lamp with control fuse/ MCB
-
-
-
... More
Two(2) - Outgoing Feeders for (1 No 45 KVAR APFC Panel(Capacitor Bank & 1 No Spare) each Comprising of
-
-
-
... More
One (1) -100A TP 25KA MCCB
-
-
-
... More
One(1) set of – 100/5A , 15VA , CL 1.0, CT
-
-
-
... More
One (1) - 3 Ph Digital Ammeter.
-
-
-
... More
One Set ON/OFF Indicating lamp with control fuse/ MCB
-
-
-
... More
Nine(9) - Outgoing Feeders for (2 Nos Lifts Panel(1&2), 1 UPS, 5 Nos Floor Distribution Panel(1,2,3,4 & 5) & one spare) each Comprising of
-
-
-
... More
One (1) -63A TPN 25KA MCCB
-
-
-
... More
One(1) set of – 63/5A , 15VA , CL 1.0, CT
-
-
-
... More
One (1) - 3 Ph Digital Ammeter.
-
-
-
... More
One Set ON/OFF Indicating lamp with control fuse/ MCB
-
-
-
... More
Seven(7) - Outgoing Feeders for (1 No Water Supply panel, 1 stand by for Water Supply panel, 4 Nos ACDB(1,2,3,4) & One spare) each Comprising of
-
-
-
... More
One (1) -32A TPN 25KA MCCB
-
-
-
... More
One(1) set of – 32/5A , 15VA , CL 1.0, CT
-
-
-
... More
One (1) - 3 Ph Digital Ammeter.
-
-
-
... More
One Set ON/OFF Indicating lamp with control fuse/ MCB
-
-
-
... More
One (1) - Outgoing Feeder each comprising of
-
-
-
... More
One (1)- 32 Amp FP 10 KA MCB with 32 Amp TP contactor, over load trip, Programmable timer for automatic switching ON and OFF of external lighting, Auto/ Manual selector switch, Auxilliary Contactor, ON/OFF push button and indication along with control fuse etc as required.
-
-
-
... More
Battrey/Battrey charger
-
-
-
... More
Supplying, installing, testing and commissioning of 230 V, Single Phase, 50 HZ, AC operated suitable capacity (capacity to be decided after selecting the Makes of Material for switchgears) AH battery with Battery Charger for DC supply of following rating with Boost and trickle charging facility and protection from over charging a DC DB with required numbers of outgoing DP MCB's plus 2 Nos. of 16 Amp. DP MCB's as spare feeders complete as required and as per specifications.
-
-
-
... More
*Necessary interlocking for auto start/auto stop AMF control such that 1 Nos. T/F incomer, 1 No Bus couplers,1 Nos DG incomers, shall be successfully operational in all possible combinations.
-
-
-
... More
*The Switchboard shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as required.
-
-
-
... More
PANEL AS ABOVE
1
427430
-
... More
APFC Panel(45 KVAR)
-
-
-
... More
Busbar - 200 Amp Al busbar with SC rating of 25 KA suitable for operation at 415 Volt, 50 Hz, 3 Phase supply
-
-
-
... More
One(1) - Incoming feeder having
-
-
-
... More
One (1) - 100 Amp, 25 KA TP MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 100/5 A , 15VA, Cl 1.0 CTs, Digital Voltmeter, Ammeter, Ventilation fan.
-
-
-
... More
One(1) No. 6 steps (required for the follwoing) Microprocessor APFC controller/Relay shall continuously monitor all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand,KW, Power Factor. Controller should be mounted on the front side of the panel. Bank with 45 KVAR capacity having 3 phase MPP based heavy duty dieelectric low loss as per ECBC/IS 7752 guidelines or 0.5w/kVAR ISI marked power capacitor (5x2+ 1x5 (fixed) +3x10 ) and provided with capacitor duty contactor based switching to supress switching of inrush current .Suitable rating Al. PVC insulated bus bar & interconnections shall be included. The panel shall be complete with minimum 7% detuned reactors (only filters)for harmonics control.
-
-
-
... More
Five (5) Outgoing Feeders each provided with MCCB, Contactor, ON/OFF push button and indicating lamp and capacitors
-
-
-
... More
Three (3)-Outgoings each having
-
-
-
... More
One (1) - 32A TP,10 KA,MCB (D-Curve)
-
-
-
... More
One (1) - Capacitor duty contactor suitable for 10 KVAr capacitor
-
-
-
... More
One (1) - 10 kVAr, 525V, TP Heavy duty capacitor with internal wiring, fuses,Harmonic Filter (7%) etc. complete as required
-
-
-
... More
Three (3)-Outgoings each having
-
-
-
... More
One (1) - 25A TP,10 KA MCB (D-Curve)
-
-
-
... More
One (1) - Capacitor duty contactor suitable for 5 KVAr capacitor
-
-
-
... More
One (1) - 5 kVAr, 525V, TP Heavy duty capacitor with internal wiring, fuses,Harmonic Filter (7%) etc. complete as required
-
-
-
... More
1 Nos. 5 KVAR (fixed) capacitor Bank each with 7% harmonic filter with capacitor duty 32A TP contactor to carry expected current continuosly.
-
-
-
... More
(i) All the capacitors shall be suitable for 480 V rating
-
-
-
... More
(ii) Necessary control and firing card with proper wiring and lugs of the required rating to be provided.
-
-
-
... More
(iii) Two nos 300 mm sweep Heavy duty exhaust fans to be provided
-
-
-
... More
(iv) LED indication for number of capacitor banks ON & Power Factor lagging or leading.
-
-
-
... More
(v) The APFC shall be protected from following
-
-
-
... More
* Over-voltage & voltage unbalance * Total Harmonic Distortion
-
-
-
... More
* Over temperature-system should be in standby mode and automatically restart after above condition restored.
-
-
-
... More
PANEL AS ABOVE
1
82800
-
... More
Floor Distribution Panel(FDP)
-
-
-
... More
One (1) Incomer - 63 Amp, 25 KA, FP MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB Digital Voltmeter and Ammeter with selector switch .
-
-
-
... More
Busbar - 100 Amp Al busbar suitable for operation at 415 Volt, 50 Hz, 3 Phase Supply.
-
-
-
... More
Four(4) - Outgoing Feeders for (1 No LDB , 1 No PDB & Two spares) each Comprising of
-
-
-
... More
One (1) -32A TPN 25KA MCCB
-
-
-
... More
PANEL AS ABOVE
5
197000
-
... More
UPS Panel(O/G)
-
-
-
... More
One (1) Incomer- 63 Amp TPN ,25 KA MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB Digital Voltmeter and Ammeter with selector switch
-
-
-
... More
Busbar - 100 Amp,25KA Cu TP2N busbar suitable for operation at 415 Volt, 50 Hz, 3 Phase supply
-
-
-
... More
Six(6) - Outgoing Feeders for (3 Nos of UDB- 1,2,3, One Server Rack & Two spares) each Comprising of
-
-
-
... More
One (1) - 32 Amp 4P, 10 KA MCB
-
-
-
... More
Four (4) - Outgoing Feeders (One CCTV, One Fire Alarm wih PA System, One ELV System & One spare) each comprising of
-
-
-
... More
One (1) 25 Amp, 10 KA DP MCB
-
-
-
... More
Six (6) - Outgoing Feeders (Five nos Emergency DB(EDB)-1,2,3,4,5 & One spare) each comprising of
-
-
-
... More
One (1) 16 Amp, 10 KA DP MCB
-
-
-
... More
PANEL AS ABOVE
1
41200
-
... More
DBS
-
-
-
... More
Supplying and fixing following way,single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required and as per direction of Engineer-in-charge.(But without MCB/RCCB/Isolator) (For Floors EDBs)
-
-
-
... More
6 way, Double door
3
2826
-
... More
8 way, Double door
2
2122
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required and as per direction of Engineer-in-charge.(But without MCB/RCCB/Isolator). (For all Floors LDBs, PDBs, ACDBs & UDBs)
-
-
-
... More
4 way, Double door (4+12)
3
6594
-
... More
6 way, Double door(4+18)
13
34567
-
... More
8 way, Double door(4+24)
1
3171
-
... More
12 way, Double door(4+36)
1
7189
-
... More
Supplying and fixing following rating MCBs/ Isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required and as per direction of Engineer-in-charge.
-
-
-
... More
32 Amps, FP 10 KA MCB (C-Curve)
15
21060
-
... More
16 Amps, FP 10 KA MCB (C-Curve)
3
4212
-
... More
16 Amps, DP 10 KA MCB (C-Curve)
5
4115
-
... More
6 Amp to 32 Amp, 10 KA SP MCB (C-Curve)
386
96500
-
... More
Cables, Cable Laying & Termination
-
-
-
... More
Supplying & Testing of 1.1 KV grade Aluminium XLPE power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply and as per direction of Engineer-in-charge.
-
-
-
... More
3C X 4 sqmm
280
18200
-
... More
4C X 10 sqmm
220
20680
-
... More
4C X 16 sqmm
400
42000
-
... More
3.5C X35 sqmm
20
3500
-
... More
3.5C X70 sqmm
50
15300
-
... More
3.5C X120 sqmm
110
50380
-
... More
Supplying & Testing of 1.1 KV grade Cu XLPE Un Armoured(Flexible) power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply and as per direction of Engineer-in-charge.
-
-
-
... More
1C X 16 sqmm
80
9520
-
... More
Supply, laying, connecting, testing & commissioning of following sizes of FRLSH PVC insulated PVC sheathed copper conductor armoured/unarm. control cable of 1.1 KV grade conforming to IS 1554 (Part-I) with upto date amendments etc. complete as required. Including both end termination with copper lugs, brass comprasion gland etc., ferrule numbering and as per direction of Engineer-in-charge.
-
-
-
... More
12 Core x 2.5 Sqmm.
20
13140
-
... More
3 core X 1.5 Sq.mm. (copper conductor unarmoured cable including termination with cu. Lugs.)
70
8120
-
... More
3 core X 2.5 Sq.mm. (copper conductor unarmoured cable including termination with cu. Lugs.)
20
3320
-
... More
Cable Laying
-
-
-
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required and as per direction of Engineer-in-charge.
-
-
-
... More
Upto 25 sq. mm
20
2060
-
... More
Above 25sq. mm and upto 120 sq. mm
50
5600
-
... More
Laying of One No. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/MASONERY TRENCH/Metal Pipe/On Wall Surface(Clamped with saddle/PVC & UPVC Pipe)/ Cable Tray as required and as per direction of Engineer-in-charge.
-
-
-
... More
Upto 25 sq. mm
780
14040
-
... More
Above 25 sq. mm and upto 400 sq. mm
120
4440
-
... More
Termination Of Cables
-
-
-
... More
Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade as per direction of Engineer-in-charge.(without cost of Cable)
-
-
-
... More
3C X 4 sqmm(19 mm)
48
4608
-
... More
4C X 10 sqmm(19 mm)
16
1776
-
... More
4C X 16 sqmm(28mm)
22
2728
-
... More
3.5C X 35 sq. mm (32mm)
2
258
-
... More
3.5C X 70 sq. mm (38mm)
2
332
-
... More
3.5C X 120 sq. mm (45mm)
4
804
-
... More
Supply & making of Sigle Compression cable glands and crimping type Cu. cable lugs with required tools and equipments as per IS. The glands and lugs shall be suitable for 2XY cables as per direction of Engineer-in-charge.
-
-
-
... More
1C X 16 sqmm
24
1944
-
... More
Cable Tray
-
-
-
... More
Supply, fabricating and installing following size of hot dip G.I. perforated type cables trays including suspending from ceiling with angle, rods connection pieces, horizontal vertical bends, reducers, tees, cross members,G.I. nut bolts, G.I. washers, fasteners etc. complete as required per specifications & approved by the Engineer Incharge.
-
-
-
... More
150 mm (W) X 50 mm depth X 1.6 mm thickness
240
94320
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
50
26300
-
... More
Supplying & fixing of hot dip GI underfloor raceway system with neoprene gasketted removable cover fixed to the raceway by countersunk cadmium plated screws at 300 mm intervals recessed in floors excluding the cost of chasing and making good. The GI raceway system alongwith all fittings like bends, T-joints, couplers etc. shall be fabricated from 2 mm thick and covers from 3 mm thick GI sheets and including cost of earth links between adjacent sections to ensure earth continuity complete required per specifications & approved by the Engineer Incharge.
-
-
-
... More
100 mm x 25mm x 2mm (1 compartment) - 25mm Height
50
72650
-
... More
225 mm x 25mm x 2mm (3 compartment) - 25mm Height
35
109550
-
... More
300 mm x 25mm x 2mm (3 compartment) - 25mm Height
42
133644
-
... More
Supplying and fixing floor recessed junction boxes for hot dip GI raceway systems fabricated from 3 mm GI sheets finished with powder coating paint finish of approved colour of teh top cover only with 1, 2 or 3 nos "+", "I", ''L' shaped support in the centre in case required with 3 mm thick neoprene gasketted removable cover fixed by counter sunk cadmium plated screws including the cost of earth links at all joints to ensure earth continuity and excluding the cost of chasing and making good recess in floor etc complete as required and as below.
-
-
-
... More
150 X 150 x 30mm deep - Height Adjustible 50-70mm - Unit Nos
26
72930
-
... More
225 X 225 x 30mm deep - Height Adjustible 50-70mm - Unit Nos
14
48776
-
... More
300 X 300 x 30mm deep - Height Adjustible 50-70mm - Unit Nos
10
45920
-
... More
Supply, Installation, Testing & Comissioning of 40 Kva (make: APC, Emersion, V-Guard or equivalent) true Online Smart UPS System with(3-Ph In & 3-Ph out) VRLA Sealed maintenance free battery with independent 12V units cell banks of capacity designed for end cell 12V/65 AH X 32 nos each UPS for 15 Min Back Up Rack & Interlink Cable included as per direction of Engineer-in-charge.
1
604138
-
... More
Supply, delivery and laying of following sizes of 2mm thick PVC Conduit concealed in wall/ column/ roof slab of the building alongwith other accessories and 18 swg GI wire complete for Electrical Wiring/Telephone / TV & Data cable wiring as required and as per direction of Engineer-in-charge.
-
-
-
... More
20mm dia
750
33750
-
... More
25mm dia
150
7500
-
... More
External Electrification
-
-
-
... More
EQUIPMENTS - HT Panels , Cables & Transformer
-
-
-
... More
METERING INDOOR UNIT
-
-
-
... More
Supply and installation of indoor type 11kV SCADA based smart Energy metering unit with CT, PT's & proper connections as per the approved design from local electricity board authority only as required will installed inside (inbuilt) 160 KVA Compact Substation (CSS) to be done by Contarctor.
-
-
-
... More
Item no. 1, shall be executed after liasioning,approval & as per the statutory requirement of the local electricity authority
-
-
-
... More
H.T. CABLES, LAYING & TERMINATIONS
-
-
-
... More
Supplying & Testing of 3C x 150 Sq.mm, 11kV(E) GRADE XLPE aluminium conductor steel armoured Cable and as per direction of Engineer-in-charge.
30
8340
-
... More
Laying 3C X 150 Sq.mm, 11kV GRADE XLPE cable direct in ground including excavation, sand cushioning, protective covering & refilling the trench/existing masonary open duct/RCC/HUME pipe/Cable Tray as required and as per direction of Engineer-in-charge.
30
8940
-
... More
Supplying and Making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 3C X 150 Sqmm.,XLPE aluminium conductor cable of 11 KV grade as required and as per direction of Engineer-in-charge.
2
5726
-
... More
Masonery Trench
-
-
-
... More
Masonery Trench for Cable Laying having internal dimensions 1000 MM X 750 MM in Size with P.C.C 1:3:6 at Bottom work , Bricks works 1:6, 12mm thick Cement Plaster (1:6)Inside Wall & Base, 16mm thick Cement Plaster (1:6)Outside Wall as well as M-20 Pre-cast Cover Slab all complete on instruction of Site-in-Charge.
20
108000
-
... More
Supplying and laying HDPE pipe of following diameter burried in ground at appropriate depth for cable laying as required and as per direction of Engineer-in-charge.
-
-
-
... More
110 mm dia
20
14460
-
... More
COMPACT SUB-STATION (CSS)
-
-
-
... More
Design, manufacture, loading, unloading, supply, installation, testing and commissioning of 11kV, 160 kVA Compact unitized Substation, comprising following components interconnected with one another, including required interconnection with cable/ busbar and internal earthing connections complete as required (as per specifications) and as per direction of Engineer-in-charge.
-
-
-
... More
11 kV Compact Secondary Sub Station outdoor type designed for natural cooling having type tested equipment comprising distribution transformers, Air insulated compact switchgear having metal enclosed robotically sealed/ welded stainless steel tank , low voltage switchboard, interconnection between HT switchgear & Transformer using single core cables and Transformer to LT switchgear using Al. bus bars/Cables factory built / ready for connection type ,other associated equipment etc. without oil pits complete as required conforming to detailed specification laid down in the tender documents. The enclosure shall have construction using G.I. sheets and shall be painted with powder coated from the exterior. The enclosure for LT switchgear & HT switchgear shall be provided with IP54 ingress protection. The transformer compartment will have IP23 ingress protection having safety door interlock with HT switch. The transformer used shall be specially designed for low losses and shall be hermetically sealed & with corrugated tank. The earthing shall be suitable for 20kA fault current. The combination of CSS shall be as per details given below:-
-
-
-
... More
Description
-
-
-
... More
H.T. PANEL (11KV)
-
-
-
... More
Incoming / Outgoing Circuit Breaker:
-
-
-
... More
1 No. 11KV, 630Amps. 350mVA SF6 insulated Vaccum circuit breaker unit with self-powered electronic over current,short circuit and earth fault relay, fitted with Digital Multi function meter (comprising kWh, kW, kVAr, voltage, ampere, Power factor indications) device as per IEC 61958 and dual core Cast resin type current transformer 20/5A along with LV compartment.
-
-
-
... More
Epoxy cast resin type potential transformers of ratio 11 KV/ 110 volt,100 VA with HT and LT fuses,connected jumpers/busbars ,LV compartment to incorporate voltmeter as per requirement, including providing Digital Voltmeter (0-12kV) as per requirement.
-
-
-
... More
DC Shnut trip coil
-
-
-
... More
Cable box suitable for 1No. three core 300 sqmm XLPE cables.
-
-
-
... More
Strip heater with thermostat to prevent absorption of moisture.
-
-
-
... More
Inbuilt 3-Ph Smart HT Energy Meter Unit including CT & cabling with SCADA Comaptible with suitable communication port which provides 30 min load survey and monthly billing survey as required(Approved by CESU).
-
-
-
... More
TRANSFORMER (Dry Type)
-
-
-
... More
1 No. 11 KV / 0.415 KV, 160KVA 3 phase , 50 HZ, DYn11 Air Natural cooling Cast Resin Dry Type Transformer with tap range of -10% to +10% with OFF Load Tap Changing operation in steps of 2.5 % with class of insulation "F", outdoor mounting type, hermitically sealed, corrugated wall design low loss as per IS-1180 Level-2 amended upto date with Cu winding, Annuaciator (6-Window) with indicating lamp, buzzer, accept/ reset & test push button with flasher as required and standard fittings Complete with all auxilary protection etc. as required.
-
-
-
... More
LT Switchboard (MOUNTED INSIDE COMPACT SUBSTATION ENCLOSURE)
-
-
-
... More
Incoming - 250 Amp 4P MCCB, 25 kA (Icu=Ics) , with Microprocessor based O/L, E/F, S/C Relay, Complete with Digital type Multifunctional Meter (V,A,PF,KWH,KVA & KW ) with CTs and control MCB, phase indicating lamps LED type, On/Trip indications.
-
-
-
... More
Four pole SPD class-B at LT incoming breaker
-
-
-
... More
Compact sub-station as described above and as per specifications.
-
-
-
... More
Note- Final rating & various parameter of Equipments, in addition to the specified above shall be selected on the bases of ambient conditions at site, client specific requirements, standards specified in the tender, requirement for the NOC from various statutory authorities, PWD guidelines & as per detail designed stage calculations.
1
1399000
-
... More
Professional charges for getting approvals, liasioning with the respective departments, getting the complete E&M installation including Substation, DG set, fire fighting and Internal EI installation approved from the electrical inspectorate, ORISSA PCB and fire regulatory authorities complete in all respects with as built drawings.
1
160000
-
... More
DG Sets & Other Accessories
-
-
-
... More
DG Set
-
-
-
... More
Supplying, Installation, Testing and Commissioning of AMF starts Silent Diesel Generating Set having prime power rating of 125 KVA, 1500 RPM at 0.8 pf at NTP conditions (Alternator directly coupled with Diesel Engine) suitable for automatic operation on mains failure Panel complete in all respect and comprising of following enclosed specification, suitable for indoor installation and as per direction of Engineer-in-charge.
-
-
-
... More
A. Alternator : Self excited, self regulated, brush less type 415 Volt 3 phase 50 Hz synchronous generator delivering 125 KVA at 0.8 PF (lag) at NTP condition Conforming to IS/ IEC 60034- 1, screen protected self regulated + 1% regulation, IP 23 protection with insulation Class-H, AC alternator complete with, 250 Amp 25KA FP MCCB and outgoing terminals taken out for connecting through Cable along with all accessories.
-
-
-
... More
B. Engine : Four(4) stroke, Multi-cylinder Turbo charged Radiator Cooled Diesel Engine of suitabe BHP (to give prescribed output excluding power consumption for running Auxiliary Accessories) operating at 1500 rpm, daily fuel tank of 250/300 ltr capacity duly calibrated including medium class MS piping for fuel piping from day tank to Engine and back, residential type silencer, SS flexible below for exhaust pipe and 24 V DC starting arrangement with 2 Nos 12 V battery having Ampere- Hr rating as prescribed by the manufacturer of Engine along with battery charger, as required.
-
-
-
... More
C. Base Plate : Common base plate of required size for mounting of engine alternator set fabricated from MS channel and vibration damping arrangement with cushy foot mounting i/c painting as per standard practice of manufacturer etc. required.
-
-
-
... More
D. Acoustic Enclosur: The acoustic enclosure is made of 14/16 gauge CRCA sheet. The salient features of acoustic enclosure are:- The enclosure is of modular construction with the provision to assemble and dismantle easily at site finished with powder coat painting of approved colour.
-
-
-
... More
a)The Sheet metal components are Seven Tank pre treated before powder coating.
-
-
-
... More
b)The door are gasketed with high quality EPDM gaskets to prevent leakage of sound as well as door handles are lockable type.
-
-
-
... More
c) Specially designed attenuators to control sound at air entry and exit points.
-
-
-
... More
d) Adequate ventilation to meet total air requirements.
-
-
-
... More
e) Temprature of enclosure should not exceed beyond 5-7°C of ambient temperature.
-
-
-
... More
f) Emegency shut down button from outside the enclouser.
-
-
-
... More
g) Noise level; 75 DB (A) at 1 mtr Distance.
-
-
-
... More
h) Automatic voltage regulator (AVR).
-
-
-
... More
i) Proper Anti Vibration Pads(AVP)
-
-
-
... More
j) The cost of initial charge of lubricants, coolant & first filling of fuel etc. shall be included .
-
-
-
... More
DG set as above
1
959000
-
... More
Supplying and laying 100 MM Dia Class-B MS pipe for horizontal and vertical run of Exhaust piping with asbestos lagging and Al sheet cladding along with clamps and supports above 3 mtr etc from the roof of DG Set as required and as per direction of Engineer-in-charge.
20
76000
-
... More
Outdoor Panel
-
-
-
... More
Supply, installation, testing and commissioning of cubicle type sectionalised, front operated Bottom entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earth bus etc as required and as per direction of Engineer-in-charge.
-
-
-
... More
Feeder Pillar for External Lights
-
-
-
... More
Supplying installation testing commissioning if double door feeder pillar fabricated out of 2 mm thick CRCA sheet duly painted, 200 Amp Al busbar with neutral bus rincluding cc/ brick foundation as required including following internal fixtures as per direction of Engineer-in-charge.
-
-
-
... More
1 No - 32 Amp TPN MCB Incomer
-
-
-
... More
4 Nos - 16 Amp SP MCB Outgoing
-
-
-
... More
1 No - 16 Amp SP MCB with 6/16 Amp socket outlet with 10 Amp modular switch and 1 No- Bracket Holder with 6 Amp Modular switch.
1
22000
-
... More
External Light Fittings
-
-
-
... More
Supplying, installation testing and commissioning following type of light fixtures with all accessories, as required and as per direction of Engineer-in-charge.
-
-
-
... More
42 Watt Pole Mounted Outdoor Luminaires Street Light (4200 lumen) PHILIPS (CAT No:Make: Philips BRP052LED036CW HP SLA FG S1 PSU GR) / Equivalent of Crompton/ Wipro along with CC/bricks pedestal & loose wire box, connectors 50 MM Dia 4 mtr Height GI Tubular Pole with one 6A MCB for loop in loop out type as required and as per direction of Engineer-in-charge.
17
130764
-
... More
Gate Light (Make: Bajaj Spigot for BJMPTI 125 MV LPF CAT No: HPMV 125 W or equivalent of Philips/ Crompton/ Wipro)along with loose wire box, connectors with one 10A MCB as required suitable for operation on 240 Volt AC supply as required and as per direction of Engineer-in-charge.
4
14464
-
... More
Lightning Protection System
-
-
-
... More
Providing and fixing of lightning conductor finial, made of 25mm dia 300 mm long, Copper tube, having single prong at top, with 85 mm dia 6 mm thick copper base plate including holes etc. Along with Test junction complete as required and as per direction of Engineer-in-charge.
14
109200
-
... More
Earthing
-
-
-
... More
Supply & Fixing of Copper plate Earthing (600x600x3mm thick) including accessories, and providing masnory enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required and as per direction of Engineer-in-charge.
16
132624
-
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia GI pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and refilling etc. as required and as per direction of Engineer-in-charge.
50
23950
-
... More
Providing and fixing 25 mm X 5 mm dia copper strip on wall/surface or in recess for connection etc. as required and as per direction of Engineer-in-charge.
260
128440
-
... More
Providing and fixing 4.0 mm dia cu wire on surface or in recess for loop earthing as required and as per direction of Engineer-in-charge.
810
24300
-
... More
Miscllaneous Items
-
-
-
... More
Supplying and fixing 3 nos GI fire bucket of 9 ltr capacity with suitable pedastal arrangement for sub-station yard etc as reqd.
1
5600
-
... More
Supplying 11 kV hand gloves as reqd.
1
1150
-
... More
Supplying and Laying Rubber mat 1M X 2M X 2.0MM thick to withstand 1.1 KV dielectric strength, Electrical Safety/Shock Chart & SLD etc as required.
1
2464
-
... More
Supplying & fixing Route Markers for HT/LT UG Cable lines.
10
2400
-
... More
Providing and fixing LT danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
2
374
-
... More
Supply of Hand pump to pump the HSD fuel from barrels to the DG tank with flexible hose pipes etc as required.
1
5000
-
... More
Part-III PH Work
-
-
-
... More
All the rates quoted by the contractor shall be complete finished work including cost of all labour, material, scaffolding, finishing as required with tools, plants, lead, lift, taxes, tollage, octroi, royalties etc. except those specially excluded in the description of the individual items. All works shall be executed as per drawings, specification and instructions of Project head and shall include the supply and installation at site of all the equipment, ancillary materials as specified and all such items what-so-ever which may be required to fulfill the intent and purpose as laid down in the specification and/ or the drawings. All materials shall be as per ISI specification and with IS certification marked wherever applicable. The material shall be duly approved by Engineer Incharge/ Architect before incorporation in the actual work.
-
-
-
... More
SANITARY FIXTURE & FITTINGS
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid ,10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting & C.I. brackets, 40mm flush bend ,overflow arrangement with specials of slandered make and mosquito proof coupling of approved municipal design complete including painting of fitting and brackets ,cutting and making good the walls and floors wherever required etc., complete in all respected as directed by Engineer in Charge.
-
-
-
... More
W.C. pan with ISI marked black solid plastic seat and lid.
44
153832
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete as directed by Engineer in Charge.
-
-
-
... More
Flexible pipe
-
-
-
... More
40 mm dia
47
4239
-
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
22
109995
-
... More
Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass pillar taps, 32 mm. C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required as directed by Engineer in Charge.
-
-
-
... More
White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.
2
6181
-
... More
White Vitreous China Wash basin size 550x400 mm with single of 15 mm C.P. brass pillar tap.
47
145258
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required as directed by Engineer in Charge.
-
-
-
... More
Kitchen sink with drain board
-
-
-
... More
510x1040 mm bowl depth 250 mm
2
16952
-
... More
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as directed by Engineer in Charge.
47
29144
-
... More
Fixing standard size Chromium Plated brass or glazed porcelain Toilet paper holder fixed to woden plugs with Chromium Plated brass screws complete as per specification.
-
-
-
... More
C.P. brass
44
38742
-
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink as directed by Engineer in Charge.
-
-
-
... More
Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms
39
8388
-
... More
Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms
22
4857
-
... More
Fixing (a) Liquid Soap Container – Glass container or Plastic container with Chromium Plated brass lid and brackets fixed to wooden plugs with Chromium Plated brass screws or (b) Chromium Plated brass soap dish complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws or (c) white glazed tooth brush holder fixed to wooden plugs with Chromium Plated brass screws as per specification.
47
23904
-
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
47
20078
-
... More
Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement :2 coarse sand :4 graded stone aggregate 6mm nominal size) as per direction of Engineer -in - charge and finished smooth.
-
-
-
... More
White Agaria Marble stone
49
125964
-
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms as directed by Engineer in Charge.
47
24787
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 and etc complete as directed by Engineer in Charge.
-
-
-
... More
15 mm nominal bore
167
116515
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 etc complete and as directed by Engineer in Charge.
-
-
-
... More
15 mm nominal bore
44
18981
-
... More
Providing and fixing jet spray consisting of jet spray, triangular spacer attached with toilet seat hinges, C.P. brass angle stop cock with PVC/C.P brass flexible pipe, wall flange complete as required etc complete and as directed by Engineer in Charge.
44
63637
-
... More
Providing and fixing C.P. brass cast twin coat hooks fixed to wall/door with wooden cleats and S.S screws including cutting holes in wall and making good the wall wherever required etc complete and as directed by Engineer in Charge.
44
9900
-
... More
Total Carried Over Summary SANITARY FIXTURE & FITTINGS
-
-
-
... More
INTERNAL DRAINAGE (SOIL,WASTE,RAIN WATER PIPES)
-
-
-
... More
Providing, fixing, testing and commissioning of UPVC SWR pipe type 'B' conforms to IS : 13592-1992 with all fittings such as bends, tees, elbow, 'Y', offset, cleaning pipe door, clamps etc. conforming to IS:14735-1999 and steel structural supports etc. including cutting the floors, walls and making good the same in cement concrete 1:2:4 & cement mortar 1:4. The wall thickness of pipe and technical characteristic conforms to IS : 13592-1992 type 'B'. The fitting dimension conforming to IS : 14735-1999. The jointing to be completed with rubber ring joint/solvent weld joint as required/applicable etc complete and as directed by Engineer in Charge.
-
-
-
... More
110 mm (OD)
637
211993
-
... More
Providing and laying cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate, 20 mm down gauge) 75 mm in bed and all around UPVC SWR soil & waste pipes under floor, including shuttering and necessary reinforcement etc. complete in all respects etc complete and as directed by Engineer in Charge.
-
-
-
... More
110 mm (OD)
475
110817
-
... More
Providing, fixing, testing and commissioning of UPVC 'P' trap/floor trap/urinal trap of self cleansing design having 50 mm water seal with or without horn conforming to IS : 14735-1999 including setting with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 hard stone ballast 20 mm nominal size) including cost of cutting and making good the walls & floors wherever required etc complete and as directed by Engineer in Charge.
-
-
-
... More
110 mm inlet x110 mm outlet.
74
22695
-
... More
Providing, fixing, testing and commissioning of UPVC inlet fittings (hopper) receive waste from fixture waste with maximum 3 inlets 40, 50 & 63 mm OD size, fabricated from 110 OD UPVC SWR pipe, UPVC sockets, fixed to UPVC traps including solvent weld joint/rubber ring joint, complete with all civil work set in cement concreate 1:2:4 as required including cost of cutting and making good the walls & floors wherever required etc complete and as directed by Engineer in Charge.
25
10166
-
... More
Providing, fixing, testing and commissioning of UPVC cleanout plug conforming to IS : 14735-1999 complete with all fitting; accessories and civil work etc complete and as directed by Engineer in Charge.
-
-
-
... More
110 mm OD
12
5335
-
... More
Providing, fixing, testing and commissioning of UPVC waste Pipe conforming to IS : 4985-2000 class III including all moulding fittings conforming to IS : 7834 (Part-1 - Part -7) 1987 such as tees, bends, reducers, coupling, adopters etc. solvent welded joint as per manufacturer recommendation including cutting and making good the walls, floors, R.C.C. work etc. (For fixtures waste) etc complete and as directed by Engineer in Charge.
-
-
-
... More
40 mm (OD)
98
10799
-
... More
50 mm (OD)
61
9272
-
... More
63 mm (OD)
25
4750
-
... More
Providing and fixing UPVC floor drain including all fitting and accessories fixed in cement mortar complete in all respect etc complete and as directed by Engineer in Charge.
-
-
-
... More
75 mm OD x 63 mm OD
2
175
-
... More
110 mm OD x 63 mm OD
25
3455
-
... More
Providing and fixing straight/offset type flexible single body push fit type WC Pan Connector with factory supplied seal guard with integrated single mould sealing fins made of flexible EVA Body, including bush/adaptor for use with CI Pipe as supplied with Pan Connector (For European water closet) etc complete and as directed by Engineer in Charge.
44
25898
-
... More
Providing, fixing, testing and commissioning of UPVC rain water pipes (IS : 4985-1983 class-III ) including injection moulded fittings (heavy duty) (plain or door) e.g. bends, junction, cowls, tees, offsets, access pieces etc. Clamps/Supports jointing with rubber ring/solvent cement joints including cutting chase or holes in walls and floors and making good as required at Site [For Balcony Drain + Terrace Rain Water Downtake Pipe] etc complete and as directed by Engineer in Charge.
-
-
-
... More
90 OD
12
7434
-
... More
110 OD
208
178880
-
... More
Providing, fixing to the inlet mouth of rain water pipe PVC grating / Jali of following size including all fitting and accessories including civil work etc complete and as directed by Engineer in Charge.
-
-
-
... More
200 mm x 200 mm size (for Terrace Rain Water)
17
9411
-
... More
Providing and fixing in position stainless steel cockroch trap consisting of 0.45 mm thick inner and outer cup and 1.00 mm thick top grating (Jali) with ring to be fixed inside C.I. or uPVC ‘P’ traps with cement concrete. (For Kitchen ) etc complete and as directed by Engineer in Charge.
2
1429
-
... More
Providing & fixing 1 mm thick stainless steel grating with rim of approved design including setting in floor with cement mortar. (For Floor Drain) etc complete and as directed by Engineer in Charge.
-
-
-
... More
125 mm dia
25
16317
-
... More
Providing & fixing rain water `Khurras' size 450x450 mm required depth with lead flashing around the pipe with one piece lead sheet of 3 mm thick set on a layer of cold bitumen. Including Heavy duty CI/MS grating as per drawing complete as required etc complete and as directed by Engineer in Charge.
17
4517
-
... More
Providing and fixing M.S structural work fabricated from standard sections e.g. M.S. rounds, angles, channels, plates including cutting to size, welding, drilling with concrete drilling bits and fixing dash fasteners in RCC structural members as directed by Engineer-in-charge including cutting and making good the walls, ceilings and floors (for all types of pipe supports, clamps, etc.) complete as directed by the Engineer in charge.
245
28437
-
... More
Providing,Fixing,testing and commissioning storage type (pressurised type) electric hot water heater copper. sheet container, 25 mm thick insulation, stove enamelled M.S. jacket thermostatically controlled immersion heater with pilot neon lamp, suitable length of electrical cable and 15 amp 3 pin plug top, complete in all respect including testing etc complete and as directed by Engineer in Charge.
-
-
-
... More
25 litres capacity
2
19105
-
... More
Total Carried Over Summary Internal Drainage
-
-
-
... More
WATER SUPPLY INTERNAL & EXTERNAL
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Internal work - Exposed on wall
-
-
-
... More
20 mm nominal outer dia Pipes
37
7348
-
... More
25 mm nominal outer dia Pipes
49
13548
-
... More
32 mm nominal outer dia Pipes
12
4892
-
... More
40 mm nominal outer dia Pipes
12
6616
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15 mm nominal outer dia Pipes
196
28968
-
... More
20 mm nominal outer dia Pipes
74
14696
-
... More
25 mm nominal outer dia Pipes
61
16866
-
... More
32 mm nominal outer dia Pipes
12
4892
-
... More
40 mm nominal outer dia Pipes
74
40803
-
... More
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc complete and as directed by Engineer in Charge.
-
-
-
... More
Internal work - Exposed on wall (Terrace & Shaft)
-
-
-
... More
15 mm dia, nominal bore
12
2144
-
... More
20 mm dia, nominal bore
12
2595
-
... More
25 mm dia, nominal bore
12
3564
-
... More
32 mm dia, nominal bore
172
62797
-
... More
40 mm dia, nominal bore
37
16058
-
... More
50 mm dia, nominal bore
74
43578
-
... More
65 mm dia, nominal bore
86
56355
-
... More
Providing and fixing forged brass nickel plated lever operated ball valve of full flow with forged brass hard chrome plated ball with min. working pressure of 15 Kg/cm2. Lever should be anti rust coating, complete in all respects etc complete and as directed by Engineer in Charge.
-
-
-
... More
15 mm dia
7
2209
-
... More
20 mm dia
5
2186
-
... More
25 mm dia
7
3913
-
... More
32 mm dia
32
31238
-
... More
40 mm dia
10
11993
-
... More
Providing, fixing , testing and commissioning water meter with direct reading dial in KL with all necessary fitting such as threaded pieces, unions pressure gauge, isolation cock, flanges piece for future removal, flanges / unions complete with all necessary testing charges and obtaining test certificates from municipal authorities, on following size pipe lines (1 no. strainer shall be provided at inlet & outlet and cost shall be inclusive for the same). The meter shall comply to ISO 4064 standard, feasible for class B or Class A installation etc complete and as directed by Engineer in Charge.
-
-
-
... More
32 mm nominal bore
2
3428
-
... More
Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15 Kg/Sq.cm etc complete and as directed by Engineer in Charge.
-
-
-
... More
15 mm nominal bore
10
8859
-
... More
Providing & fixing gun metal horizontal / vertical non return valve conforming to IS 778 and tested to a pressure not less than 15 Kg/Sqcm, Including rubber gasket, flanges, union, nuts, bolts & washers complete as required etc complete and as directed by Engineer in Charge.
-
-
-
... More
65 mm dia
5
34067
-
... More
Water Supply Pumps :
-
-
-
... More
Supply, Installation, Testing & Commissioning of Single Stage/Multi stage Horizontal / Vertical centrifugal monobloc pumping set with delivery SS 304 body and SS 304 impeller, shaft of stainless steel SS 316 and SS shaft sleeve C.I. Base & head, mechanical seal, connected to a TEFC induction motor suitable for 400/440 volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, level controller, vibration eliminating pads as required, M.S fabricated base plate bolted to cement concrete foundations complete with fully automatic DOL starter etc complete and as directed by Engineer in Charge.
-
-
-
... More
OVERHEAD FILLING PUMPS :
-
-
-
... More
Capacity /Flow rate : 5.0 M3/ Hr
-
-
-
... More
Pumping Head : 30 m
-
-
-
... More
Power Requirement (kw) : 1.5 KW or as per manufacturer recommendation
-
-
-
... More
Location: Plant Room
-
-
-
... More
1 Set = 2 Nos. Pump (1 Working+1 Standby)
-
-
-
... More
Supply, Installation, testing & commissioning
2
218864
-
... More
Making connection from existing water supply line including necessary excavation and making good the same including cutting, boring and taping the existing line by providing and installating ferrule and making good the same including cutting. Boring and taping the existing line by providing and installing ferrule connections with necessary fittings as required and making good the same. The rate for this items also includes complete services from the contractor for liasoning works such as filling necessary applications, submission of forms for approval to the municipal authorities depositing the fees and other amounts as required getting the premises installations, inspected and approver and all other formalities required till the water connection is obtained. All the expenses incurred in authorities following up this regard shall be borne by the contractor. Department charges if any will be rreimbursed to the contractor on production of receipt of money deposited with the department etc complete and as directed by Engineer in Charge.
2
44642
-
... More
Providing and fixing Y type suction strainer with gunmetal or brass internal parts installed outside water etc complete and as directed by Engineer in Charge.
-
-
-
... More
40 mm Dia.
2
4619
-
... More
Providing and placing on terrace (at all floor levels) 3 layer insulated polyethylene water storage tank with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the bass support for tank etc complete and as directed by Engineer in Charge.
5
95103
-
... More
Providing, fixing, testing & commissioning of wafer end type cast iron butterfly valves conforming to IS : 13095 & BS : 5155 PN 10.00 (10.00 Kg/cm) pressure rating (including flanges) etc complete and as directed by Engineer in Charge.
-
-
-
... More
50 mm dia.
2
6748
-
... More
65 mm dia.
10
37377
-
... More
Providing, fixing, testing and commissioning of Fully Automatic micro-controller based water level Controller and Water-Level LED Display & motor protector including sensor, Display Panel, cabling and all fitting and accessories (For Underground Water Tanks & Overhead Water Tanks) etc complete and as directed by Engineer in Charge.
17
384412
-
... More
Providing and fixing motorized valve including control wiring upto panel & ON/OFF arrangement and all other accessories required to make the system complete including control unit to be made of good quality PVC box, as per IP 65 with cable gland also as per IP 65 and suitable for outdoor installation complete with suitable wiring. This unit should be suitable to operate solenoid valve, float switch and consisting of contactors,control transformer, MCB, Potential free contacts for BMS, indicating lamp for automatic operation of filling OH tank with level to be maintioned between 70% (low) to 100% (full) (Location : Terrace) etc complete and as directed by Engineer in Charge.
-
-
-
... More
32 mm Dia
2
22523
-
... More
Drainage Pumps :
-
-
-
... More
Supply, installation, testing & commissioning of Submersible single stage single entry pumps connected to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical. discharge pipe, in built level controller with operational moded as one pump working at low level, pumps at high level with a hooter alarm and cut off at dry level as determined. The pump shall be provided with a lifting devise of pull chain/guide rail & G.I. heavy class rising main of 5m length cable etc. as per requirement complete in all respects etc complete and as directed by Engineer in Charge.
-
-
-
... More
Pump shall be installed in a set of Two pumps (One Working and One Standby).
-
-
-
... More
Plant Room Drainage Pumps [For Plumbing and Fire Fighting Pump Room] :
-
-
-
... More
(Pumps to be suitable to handle solids upto 10-12 mm size with CI/ body, S.S. shaft, CI/ impeller with cable, double mechanical seal).
-
-
-
... More
Capacity/Flow Rate - 172.8 LPM (Each) (10.36 M3/hour)
-
-
-
... More
Pumping Head - 10 m
-
-
-
... More
Motor H.P - 2.0 KW (Approx)as per manufacturer recommendation
-
-
-
... More
RPM - 2900
-
-
-
... More
Location - Plant Room
-
-
-
... More
1 Set = 2 Nos. Pump (1 Working+1 Standby)
-
-
-
... More
Supply, Installation, testing & commissioning
2
477998
-
... More
Total Carried Over Summary Water supply
-
-
-
... More
Providing laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete and as directed by Engineer in Charge.
-
-
-
... More
150 mm diameter
37
13505
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround SW pipes including bed concrete as per standard design etc complete and as directed by Engineer in Charge.
-
-
-
... More
150 mm diameter SW Pipe
37
18562
-
... More
Providing and fixing square mouth SW gully trap grade ‘A’ complete CI grating brick masonry chamber and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.7 kg. as per standard design etc complete and as directed by Engineer in Charge.
-
-
-
... More
100 x 100 mm size P type
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
22
23570
-
... More
Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete and as directed by Engineer in Charge.
-
-
-
... More
150 mm dia RCC pipe
233
109113
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design etc complete and as directed by Engineer in Charge.
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including cost of Reinforced Precast Cover
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
20
128430
-
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) complete as per design etc complete and as directed by Engineer in Charge.
123
36010
-
... More
Supplying and fixing C.I. cover without frame for manholes etc complete and as directed by Engineer in Charge.
-
-
-
... More
560 mm diameter C.I. cover (heavy duty) the weight of the
cover to be not less than 108 kg
12
27630
-
... More
Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg etc complete and as directed by Engineer in Charge.
20
4992
-
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete etc complete and as directed by Engineer in Charge.
-
-
-
... More
For pipes 350 to 450 mm diameter
2
898
-
... More
Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500 x450mm pre -cast R.C.C. horizontal grating with frame complete as per standard design etc complete and as directed by Engineer in Charge.
-
-
-
... More
With F.P.S. bricks
17
61368
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m etc complete and as directed by Engineer in Charge.
-
-
-
... More
All kind of soils.
123
18274
-
... More
Excavating trenches of required width for pipes, cables etc including excavation for sockets, & dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming ,watering, etc and disposing of surplus excavated soil as directed, within lead of 50m etc complete and as directed by Engineer in Charge.
-
-
-
... More
All kinds of soil
-
-
-
... More
Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia
221
44485
-
... More
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is overcorres ponding basic item for depth upto 1.5 metre) etc complete and as directed by Engineer in Charge.
37
9458
-
... More
Total Carried Over Summary of External Drainage & Sewerage
-
-
-
... More
Part-IV Fire Fighting & Fire Alarm System
-
-
-
... More
PART - I : FIRE FIGHTING PUMPS, PIPING, VALVE & ACCESSORIES :
-
-
-
... More
Electric Motor Driven Hydrant Pump Location - Pump Room :
-
-
-
... More
Supplying, installing, testing and commissioning of Fire authority approved Electrical driven fire pump suitable for automatic/ manual operation consisting of the following:
-
-
-
... More
i) Horizontal split casing, high pressure, single/ multistage centrifugal type fire pump having cast iron body, bronze impeller,stainless steel shaft & capable of delivering 2280 LPM against a total head of 50 M while running at 1450 RPM complete with proper connection to suction and delivery line, and including bypass arrangement for testing of pumps as per the requirement. Suitable mechanical seal with mounting aggangement shall be included, having a name plate indicating suction, delivery, head, discharge, stages, RPM and direction of rotation.
-
-
-
... More
Pump shall be capable of furnishing not less than 150% of rated capacity at a head not less than 65 % of rated head. The shut off head shall not exceed 120% of rated head.
-
-
-
... More
ii) Squirrel cage, induction motor, TEFC type suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply, of suitable HP rating for the above pump with synchronous speed of 1450 RPM conforming to IP 55 protection & class 'F' insulation. The motor shall conform to IS 325 1978(up to date) with flexible coupling and coupling guard .
-
-
-
... More
iii) Common base plate for mounting pump and motor fabricated of mild steel channel as per manufacturer's recommendation with heavy duty Anti Vibration pads (4 Nos., heavy duty).
-
-
-
... More
iv) Suitable reinforced cement concrete pump foundation as per manufacturer's design including foundation bolts, washers as required.
-
-
-
... More
v) Flexible Coupling and coupling guard for direct coupling of pump and motor.
-
-
-
... More
vi) Drain Pipe with Valve
-
-
-
... More
Main Fire Hydran Pump
-
-
-
... More
Discharge : 2280 LPM
-
-
-
... More
Pumping Head : 54 M
-
-
-
... More
vii) Rate should included interconnection cables, foundation and foundation bolts.
1
226771
-
... More
Diesel operated Fire Pump for Hydrant System Location - Pump Room :
-
-
-
... More
Supplying, installing, testing & commissioning of fire authority approved Diesel Engine driven fire pump suitable for automatic/manual operations consisting of the following :
-
-
-
... More
i) Horizontal split casing, high pressure single/ multistage centrifugal type fire pump having cast iron body, bronze impeller,stainless steel shaft & capable of delivering 2280 LPM against a total head of 50 M while running at 1500 RPM complete with proper connection to suction and delivery line, and including bypass arrangement for testing of pumps as per the requirement. Mechanical seal shall be included, having a name plate indicating suction, delivery, head, discharge, stages, RPM and direction of rotation.
-
-
-
... More
Pump shall be capable of furnishing not less than 150% of rated capacity at a head not less than 65% of the rated head. The shut off head shall not exceed 120% of rated head.
-
-
-
... More
ii) Water cooled heat exchanger type diesel engine of required BHP or as per manufacturer at 1500 RPM for the above pump complete with standard accessories & suitable cooling system as described in specifications.
-
-
-
... More
iii) Common base plate for mounting pump & engine of required strength manufactured out of M.S. channels as per manufacture's recommendation with heavy duty Anti Vibration pads. (Cushy foot) (6 nos., heavy duty).
-
-
-
... More
iv) Flexible Coupling & coupling guard for direct coupling of engine & pump.
-
-
-
... More
v) Suitable reinforced cement concrete pump foundations as per manufacturer design including foundation bolts, washer as required.
-
-
-
... More
vi) 1 No. 200 Lits capacity day oil storage tank fabricated from 4 mm thick M.S. sheet. Tank shall be provided with inlet, outlet, overflow, vent drain connections, manhole cover (300 mm I.D.) & level indicators. Tank shall be mounted on 2 m high steel structural supports with access ladder (Painted with 2 coats of red oxide paint). Tank shall be provided with epoxy coat from inside and one coat of red oxide & two or more coats of synthetic enamel paint of approved colour on out side.
-
-
-
... More
vii) 24 volts 180 AH lead acid battery (12 volts - 2 Nos) with boost/Trickle charger for starting the engine automatically complete as required.
-
-
-
... More
Diesel Engine driven pump of:
-
-
-
... More
Discharge : 2280 LPM
-
-
-
... More
Pumping Head : 50 M
-
-
-
... More
viii) Rate should include inter connecting cables, foundation & foundation bolts.
1
467155
-
... More
Electrical Motor Driven Jockey Pump Location - Pump Room :
-
-
-
... More
Supplying, installing, testing & commissioning of fire authority approved electrically driven Jockey pump suitable for automatic/manual operation consisting of the following:
-
-
-
... More
i) Horizontal / Vertical mounted multistage jockey pump having cast iron body, S.S. impeller, stainless shaft with mechanical seal capable of delivering 180 LPM against total head of 50 M while running at 2900 RPM complete. The system shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side including bypass arrangement for testing of working of the pumping set as required. The pump should meet the requirement of IS 15105:2002 and must be approved by the local fire authority.
-
-
-
... More
ii) Squirrel cage induction motor suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply of suitable HP rating for the above pump with synchronous speed of 2900 RPM T.E.F.C type connected to pump with flexible coupling and coupling guard .
-
-
-
... More
iii) Common base plate for mounting pump and motor fabricated of mild steel channel as per manufacturer's recommendation with heavy duty 4 Nos. Anti Vibration pads.(Cushy foot)
-
-
-
... More
iv) Suitable reinforced cement concrete pump foundations as per manufacturer's design including foundation bolts, washers as required.
-
-
-
... More
v) Drain pipe with valve (25 mm dia)
-
-
-
... More
vi) Jockey Pump :-
-
-
-
... More
Discharge : 180 LPM
-
-
-
... More
Pumping Head : 100 M
-
-
-
... More
vii) Rate shall include inter connecting cables, foundation & foundation bolts.
1
76984
-
... More
Electrical Motor Driven Terrace Pump Location - Terrace:
-
-
-
... More
i) Supplying, installing, testing & commissioning of fire authority approved electrically driven Terrace pump suitable for automatic/manual operation consisting of the following:
-
-
-
... More
ii) Horizontal centrifugal end suction type fire pump capable of delivering 450 LPM against a total head of 30 M while running at 2900 r.p.m. complete with burdon type pressure gauge with Gun metal cocks/ valves etc. on the delivery side, including bypass arrangement. Gland arrangement shall be included.
-
-
-
... More
iii) Squirrel cage, TEFC induction motor suitable for 415 ± 6%V, 3 phase, 50 Hz A.C. supply of suitable H.P. for the above pump running at 2900 r.p.m. conforming to IP 55 pralecting and class 'H' insulation. The motor shall be conform to IS:325-1978 (upto date)
-
-
-
... More
iv) Common bed plate for mounting pump & motor of requisite strength manufactured out of M.S. channel as per manufacturer's recommendation.
-
-
-
... More
v) Antivibration (Cushy foot) heavy duty mounting pads as per requirement.
-
-
-
... More
vi) Coupling and coupling guard for direct coupling of motor and pump.
-
-
-
... More
vii) Terrace Fire Pump
-
-
-
... More
Flow rate : 450 LPM (27.00 m3/hr)
-
-
-
... More
Pumping Head : 30 M
-
-
-
... More
Motor KW : 5.5 KW (Approx) or As per manufacturer recommendation
1
44811
-
... More
Providing, fixing, testing and commissioning of precharged air vessel (size 450 mm dia & 1500 mm height) fabricated shell from 8 mm thick & dished end 10 mm thick M.S. Plate for pressurization of hydrant system complete with adequate pressure switches (as per design / requirement) with valve to operate as per operating sequences including 25 mm dia drain valve, air release valve with ball cock on top, 25 mm dia inlet with isolating valve duly painted from inside and out side complete as required.
1
48000
-
... More
Providing all materials, labour, T&P for laying of following dia M.S. heavy class pipes conforming to IS:1239 with ISI mark & required sizes of fitting like off set, bend, tee, reducer flange & flange joints etc. as per site condition including gas cutting by oxygen and acetelene gas flame, fitting and setting as per required size wherever necessary, jointing the pipes by electric welding confirming to IS specification and electrodes confirming to IS specification after 'V' grove cutting. Aligning the pipes inside the trenches including necessary excavation of earth work of required width & depth in all kinds of soil /rock and back filling or supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fasteners) or angle iron, G.I. pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per the approved specification including cutting holes and chases in brick/RCC wall/roof/chajja and making good the same to original condition. All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and then supply of the same shall also be included. Painting 2 (two) or more coats with synthetic enamel paint of Post office red shade over a coat of primer for above ground level & painting 2 (two) or more coats with anticorrosive epoxy paint for below ground level.
-
-
-
... More
Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approved specification including testing & commissioning the system.The cost inclusive of hire and running charges of welding generator set & all taxes, duties, transportation, hire & running charges of machineries, POL, to & fro charges with all consumables for all floors etc. all complete as per specification & direction of EIC. Make-SAIL/JINDAL/TATA
-
-
-
... More
150 mm dia.
70
237160
-
... More
100 mm dia.
20
46260
-
... More
50 mm dia.
10
10010
-
... More
40 mm dia.
10
6990
-
... More
Providing, fitting & fixing of following size cast iron double flanged slim seal wafer type Butterfly valves with EPDM rubber lined with lever operated as per IS-13095 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure for all floors etc. all complete as per specification & direction of E.I.C. Make-KIRLOSKAR/IVC/ZOLOTO/KARTAR/HONEYWELL
-
-
-
... More
150 mm dia
4
26500
-
... More
100 mm dia
2
10660
-
... More
50 mm dia
1
3050
-
... More
40 mm dia
1
2686
-
... More
Providing, fitting & fixing of following size cast iron double flanged Y type strainer with SS 304 perforated screen confirming to IS 1538 with ISI mark of pressure rating PN-1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure & all complete as per specification & direction of E.I.C. Make-KIRLOSKAR/IVC/ZOLOTO/VENUS/HONEYWELL
-
-
-
... More
150 mm dia
2
21060
-
... More
Providing, fixing, testing & commissioning of C.I. dual plate Non-return valve [PN 1.6 Rating (10kg/cm2] conforming to IS 778 and test pressure not less than 15 kg/cm2, complete 2 nos. matching flanges, rubber insertion, with nuts, bolts and washers etc of following sizes as per the instruction of EIC . Make-KIRLOSKAR/IVC/ZOLOTO/KARTAR/HONEYWELL
-
-
-
... More
150 mm dia
2
12954
-
... More
100 mm dia
2
7786
-
... More
40 mm dia
1
2728
-
... More
Providing, fixing, testing & commissioning of M.S. class 'C' diesel pump exhaust pipe including all fittings like bends, tee, clamps/structural steel support of suitable dia for the engine . The pipe shall be insulated with 100 mm thick mineral wool insulation wrapped in chicken mesh with clad with 24 gauge aluminium sheet as per the instruction of EIC. Make-SAIL/JINDAL/TATA
-
-
-
... More
100 mm dia
18
51210
-
... More
The pressure switches shall be employed for starting and shutting down operation of pumps automatically, dictated by line pressure. The Pressure Switch shall be diaphragm type. The housing shall be die cast aluminium, with SS 316 movement, pressure element and socket. The set pressure shall be adjustable.
3
14373
-
... More
Supplying and fixing 2 Way Fire Brigade inlet 63MM dia of CI body with 2 No. Gun Metal male instantaneous inlet couplings complete with cap and chain as required. For 100 mm dia M.S. Pipe connection conforming to lS : 904 as required With brick platform & duly painted with Post office red externally and white internally with synthetic enamel paint cornplete in all respect, for external hydrant, as required direction of Engineer-in-charge. (Fire Brigade inlet)
1
6979
-
... More
Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves below of suitable size with all accessories as per direction of Engineer-in-charge.
3
1494
-
... More
FIRE PUMP ELECTRICAL PANEL (FPP)
-
-
-
... More
Fabrication, Supplying, Installation, Testing & Commissioning of Electrical Fire Motor Control Panel of cubical construction, floor mounted type, fabricated out of 2mm. thick CRCA sheet, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with solid aluminium strip / single core PVC insulated FRLS copper conductor cable, having suitable mountings for switchgears and accessories and internal control & power wiring with suitable rating PVC insulated FRLS copper conductor, earth terminals, numbering etc. complete in all respects, suitable for operation on 415 V, 3 phase 50 HZ AC supply with enclosure protection class IP 42 with 800 Amp aluminium bus bar etc complete as required.
-
-
-
... More
Incoming
-
-
-
... More
a) MCCB, TPN 160 A, 25ka with adjustable thermal magnetic release and rotary handle (ICS= ICU= 25Ka) - 1 set.
-
-
-
... More
b) Digital Ammeter (0 - 160 A), 96 mm. sq. CT operated with inbuilt selector switch with 3 Nos. CT's of ratio 160/5 A, 10 VA burden and accuracy of class 1.0 - 1 Sets
-
-
-
... More
c) Digital Volt Meter (0-500 V) 96 mm. sq. with inbuilt selector switch and control MCBs - 1 Sets
-
-
-
... More
d) Phase Indicating coloured LED (RYB) with control MCBs - 1 Sets
-
-
-
... More
Bus Bar :
-
-
-
... More
Electrolytic high conductivity aluminium three phase and neutral bus bars rated at 415V, 200 amps, 50Hz, AC, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints.
-
-
-
... More
Outgoing for Main Fire Pump
-
-
-
... More
a) MCCB TPN, 125 A (with adjustable thermal magnetic release and (Ics=Icu=25KA), with CT operated digital Ammeter (0 - 160 A), with 3 CT's of 160/5 A, 10 VA, accuracy 1.0, ASS and coloured LED for on (Red) indication - 2Set (1 W + 1 Spare)
-
-
-
... More
b) Fully Automatic Star Delta Starter suitable for fire Pumps motor of minimum 50 HP / (as per the recommendation of pump manufacturer) complete with over load protection, current sensing type single phase preventer complete with contactors, push button, indicators LED type Auto/manual selector switches all accessories and FRLS copper conductor wiring etc. as required - 1 Set
-
-
-
... More
c) MCCB TPN, 40 A, 16 KA with CT operated digital Ammeter (0 - 40 A), with 3 CT's of 40/5 A, 10 VA, accuracy 1.0, ASS and coloured LED for on (Red) indication with adjustable thermal magnetic release - 3 Set(1 spare)
-
-
-
... More
d) Fully Automatic DOL Starter suitable for Jockey Pumps motor of minimum 5.0 HP / (as per the recommendation of pump manufacturer) complete with over load protection, current sensing type single phase preventer complete with contactors, push button, indicators LED type Auto/manual selector switches all accessories and FRLS copper conductor wiring etc. as required - 2 Set
-
-
-
... More
e) MCCB TPN, 32 A, 16 KA with adjustable thermal magnetic release - 1 Set
-
-
-
... More
f) MCB 4 Pole, 32/40/63 A, 10 KA 'C' - 2 Set
-
-
-
... More
g) MCB Double Pole, 16/25 A, 10 KA 'C' - 3 sets.
-
-
-
... More
h) MCCB, TPN isolator 40 A, 16ka with adjustable thermal magnetic release and rotary handle (ICS= ICU= 16Ka) - 1 set with suitable mounted in CRCA enclosure of 2mm thick IP-65 rated near terrace pump. (1 Nos.)
-
-
-
... More
Diesel Engine Control
-
-
-
... More
i) Auto / Manual selector switch and 3 attempt Starting device, Electronic timer, Relays, Auxiliary switches, Rotary switches, Tripping relays, Contactors, Push button for manual Start / Stop etc. to make the equipment automatic as per functional requirement.
-
-
-
... More
j) Battery charging unit suitable for 24 V DC with boost and trickle charger, selector switch, with suitable rating transformer, rectifier, RC filter network, fuses on AC and DC protection, 0 - 30 V DC Digital Volt meter, 0 - 20 A DC Digital Ammeter, the charger should be cut off when the engine is started and the batteries shall be charged from battery charging alternator provided in the engine.
-
-
-
... More
k) Suitable rating & type standard relays, contactors and other accessories for automatic operation of diesel engine
-
-
-
... More
l) Indication LED's for high / low lub, oil pressure, water temperature, engine on indicator, with suitable alarms, acknowledgement button etc.
-
-
-
... More
System Controller
-
-
-
... More
m) Designing, Supply, Installation, Testing and Commissioning of system controller to control operation of Main Electric Fire Pumps, Diesel Engine Pump, Jockey Pumps, Terrace Pump in sequence as per specification consisting of relays, timers, sensors, annunciation window for fault indication, complete as per specification.
-
-
-
... More
n) First Jockey pump will start than hydrant start, in case of failure of power diesel pump will start.
-
-
-
... More
o) Colour coded internal wiring and connections etc. with suitable size Fire Retardant Low Smoke PVC insulated copper cable / solid aluminium strip / bus bar from incoming to bus bar and from bus bar to switch gears / MCCB, starters, meters, selector switches, indicating LED's, interlocking and sequence operation arrangements.
-
-
-
... More
p) Terminal facility for repeat indicator of various audio and visual indications.
-
-
-
... More
Fire panel as above
1
258708
-
... More
Supply and installing of following size of perforated hotdip G.I. cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with full threaded GI suspenders, along the wall with supports and including painting etc. as required & approved by thye Engineer Incharge.
-
-
-
... More
300 mm width x 40 mm depth x 1.6 mm thickness
35
18410
-
... More
150 mm width x 40 mm depth x 1.6 mm thickness
15
5895
-
... More
100 mm width x 40 mm depth x 1.6 mm thickness
20
6960
-
... More
Supply, laying, connecting, testing & commissioning of following size of 1.1 kv grade multicore aluminium/ copper conductor XLPE insulated PVC sheathed armoured cable as per IS: 7098:1988 (Part-I) with upto date amendments etc. complete as required. Tagging on both the ends will be done with aluminium tags etc. complete as required.(Quantities as per site requirement shall be finally estimated & executed accordingly with prior approval.)
-
-
-
... More
3.5 core x 70 sqmm Al. Ar. XLPE Cable (From LT Panel to Fire Fighting Panel)
60
37440
-
... More
3 core x 50 sqmm Al. Ar. XLPE Cable (Fire Fighting Panel to Main Electric Pump Set)
20
9840
-
... More
3 core x 10 sqmm Al. Ar. XLPE Cable (Fire Fighting Panel to Jocky Pump Set & Terrace Pump Set)
50
17950
-
... More
3 core x 2.5 Sq mm copper conductor armoured control cable.
60
21900
-
... More
Supplying and making indoor end termination with brass compression gland (Heavy duty) and suitable copper / aluminium lugs for following size of XLPE insulated PVC sheathed copper/ aluminium conductor armoured/ unarmoured cable of 1.1 KV grade including cost of ferrules, cable sockets, insulation tape & other accessories etc. complete as required.
-
-
-
... More
3.5 core x 70 sqmm Al. Lugs
2
788
-
... More
3 core x 50 sqmm Al. Lugs
2
572
-
... More
3 core x 10 sqmm Al. Lugs
4
684
-
... More
3 core x 2.5 Sq mm Copper Lugs
6
1170
-
... More
Providing and fixing following size of GI strips/ GI wire etc. on surface or in recess for connections, including GI clamps etc. as required.
-
-
-
... More
25 mm x 5 mm GI strip
70
5950
-
... More
6 SWG dia G.I. wire
90
3330
-
... More
Note : Contractor shall include in his rate for providing level controller, pressure switches, wiring, cabling from level controller/pressure switch to panel etc. complete as required to operate the system automatic/manual. Pump shall be protected against running dry.
-
-
-
... More
PART - II : FIRE HYDRANT SYSTEM (INTERNAL) :
-
-
-
... More
SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF:
-
-
-
... More
Providing all materials, labour, T&P for laying of following dia M.S. heavy class pipes conforming to IS:1239 with ISI mark & required sizes of fitting like off set, bend, tee, reducer flange & flange joints etc. as per site condition including gas cutting by oxygen and acetelene gas flame, fitting and setting as per required size wherever necessary, jointing the pipes by electric welding confirming to IS specification and electrodes confirming to IS specification after 'V' grove cutting. Aligning the pipes inside the trenches including necessary excavation of earth work of required width & depth in all kinds of soil /rock and back filling or supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fasteners) or angle iron, G.I. pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per the approved specification including cutting holes and chases in brick/RCC wall/roof/chajja and making good the same to original condition. All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and then supply of the same shall also be included. Painting 2 (two) or more coats with synthetic enamel paint of Post office red shade over a coat of primer for above ground level & painting 2 (two) or more coats with anticorrosive epoxy paint for below ground level.
-
-
-
... More
Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approved specification including testing & commissioning the system.The cost inclusive of hire and running charges of welding generator set & all taxes, duties, transportation, hire & running charges of machineries, POL, to & fro charges with all consumables for all floors etc. all complete as per specification & direction of EIC. Make-SAIL/JINDAL/TATA
-
-
-
... More
150 mm dia
40
135520
-
... More
100 mm dia
20
46260
-
... More
20 mm dia
10
3100
-
... More
Providing, fixing, testing & commissioning of Stainless steel single headed ISI marked oblique pattern hydrant landing valves with 80mm dia flanged inlet & 63 mm dia instantaneous type female outlet complete with stainless steel cap and GI chain, twist release type plugh and all accessories as per IS : 5290 -1993 (Type 'A') including fixing with anchor fasteners and flanged tapping from wet riser all complete as per specification & direction of EIC.
5
22280
-
... More
Providing, fixing, testing & commissioning of 15 m long non-perlocating, rubber reinforced lined fire hose pipe (as per IS : 636-1979, Type A) of 63 mm dia and length as described below. The hose shall be rated for brust pressure of 35.7 Kg/sqcm. Hose shall be complete with ISI marked SS male & female coupling (IS:903) bound & rivetted to hose pipe with copper rivets & 1.5 mm copper wire as per the instruction of EIC. (Internal fire hydrant)
5
40405
-
... More
Providing, fixing, testing & commissioning of 63 mm dia Instantaneous Pattern (male) Stainless Steel short size branch pipe with nozzle of 20 mm nominal bore outlet as per IS:903 : 1993 suitable to fit with standard instantaneous type 63mm dia coupling ISI marked (IS:903:1993) complete.
5
7590
-
... More
Providing and fixing standard fireman's axe with heavy insulated rubber handle tested for 20 Kilowatts.
5
2490
-
... More
Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet ,spray painted in Post office Red, confirming IS: 884 and moving parts complete with: a) MS fabricated hose reel drum to accommodate 20 mm dia 36 mtr long hose with fixing bracket.
b) 20 mm dia X 30 Mtr long water hose with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I.
c) 25 mm dia GM Ball Valve at inlet side of the hose reel drum as required.
5
44875
-
... More
Providing supply & fixing of MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge.
5
13110
-
... More
Providing & fixing fire authority approved weather proof M.S. fire hose door (size 900 (L) x 2100 (H)) made out of 16 gauge M.S. sheet Angle frame capable of accommodating fire hose reel, fire hydrant, hose pipe, fittings & accessories. The door shall have a single or double glazed front glass door (with 4 mm thick glass) with lock & key arrangement & shall be painted with Fire red as per IS:5, shade no. 536. Drain arrangement shall be provided by Contractor. (For Internal Hydrant)
5
25000
-
... More
Providing, fitting and fixing of C.I. 25 MM single air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of Engineer-in-charge.
1
792
-
... More
Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves below of suitable size with all accessories as per direction of Engineer-in-charge.
5
2490
-
... More
Providing, fixing, testing & commissioning of ball valve with SS ball suitable for test pressure of not less than 15 kg / sq.cm of the following size with nuts, bolts, gaskets, necessary accessories, etc as required.
-
-
-
... More
25 mm dia
1
1728
-
... More
PART - III: FIRE EXTINGUISHER :
-
-
-
... More
Note :
-
-
-
... More
[1] All Fire Extinguisher shall be HCFC, CFC and Halons free.
-
-
-
... More
[2] The Fire Extinguisher Manufacturer/Supplier shall provide declaration, Technical Data Sheet/cutsheet of All type of Fire extinguisher to be installed.
-
-
-
... More
Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical body,squeeze lever discharge valve fitted with internal discharge tube, ISI marked high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge with CO2 gas conforming to IS : 307-1996..
-
-
-
... More
Capacity 4.5 kg. I.S.I. Marked. (IS : 15683 : 2006)
15
90150
-
... More
Providing and fixing ABC stored pressure dry chemical powder (mono ammonium phosphate) Fire Extinguisher IS : 15683 latest revision manufacturer and of CRCA sheet in welded construction, finish with High quality epoxy polyster powder coated complete with brass forged ball valve, gun metal cap and nozzle, including initial filled and wall suspension bracket (suitable for fighting in class 'A', B & 'C' that is wood, textile, flammable liquid, electric and gases).
-
-
-
... More
Capacity 6 Kg (IS : 15683 : 2006)
5
12925
-
... More
Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge.
5
19835
-
... More
Supplying and installing at approved location approved make fire buckets at 24 gauge galvanized steel sheet, standard 9 liters capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letter "FIRE" in black and gold. Cost shall be inclusive of Providing MS stand duly painted over a coat of primer (one stand shall be suitable for hanging 5 buckets.
1
2691
-
... More
PART - IV : SPRINKLER SYSTEM :
-
-
-
... More
Supply,Installation,Testing & Commissioning of Pendent / Upright type Standrd Sprinkler with QB of 68 /79 deg. C temperature rating and 1/2" end connection confirming to IS: 15105 with ISI mark for all floors etc. all complete as per direction of Engineer-in-charge.
60
12660
-
... More
Supply,Installation,Testing & Commissioning of 150NB Alarm Valve , C/w Sprinkler Water Motor Gong Retarded Chamber, Flange to:- ANSI B 16. 1 Class 125/ANSI B16.5 Class 100, All Components are UL Listed/FM Approved , Rated pressure 17.50 kg/cm2, Test pressure 500PSI confirming to IS :15105:2002 with ISI mark as per direction of Engineer-in-charge.
1
39671
-
... More
Providing, fitting & fixing of following size cast iron double flanged Y type strainer with SS 304 perforated screen confirming to IS 1538 with ISI mark of pressure rating PN-1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure & all complete as per specification & direction of E.I.C. Make-KIRLOSKAR/IVC/ZOLOTO/VENUS/HONEYWELL
-
-
-
... More
150mm dia
1
10530
-
... More
Providing, fitting & fixing of following size Bronze flanged type Globe Valve with hand wheel Confirming to IS -13114 : 1991 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure for all floors etc. all complete as per specification & direction of E.I.C.
-
-
-
... More
50mm NB
1
4780
-
... More
Supply,Installation,Testing & Commissioning of C. I. Sight glass with 25 NB Gunmetal Globe Valve with CI hand wheel ISI Mark for all floors etc. all complete as per direction of Engineer-in-charge.
1
1773
-
... More
Providing, fitting and fixing of C.I. single Air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of EIC.
1
792
-
... More
Providing & fixing of Water Flow Switch 150 mm Diameter with all accessories for all floors etc. all complete as per direction of Engineer-in-charge.
1
4791
-
... More
Providing & fixing of 25 mm size Gunmetal Pressure Release Valve with isolation valve and all accessories conforming to IS3233:1965 as per direction of Engineer-in-charge.
1
2805
-
... More
Supplying, laying, testing and commissioning of approved make 2x 2.5 Sq.mm. FRLS PVC insulated Copper conductor, single core cable in existing surface/recessed conduit for annunciation panel of flow switch on the sprinkler line capable of sending impulses to the control room with accessories.
40
2120
-
... More
Providing, laying, testing & commissioning of Flexible Sprinkler Hose Corrugated Unbraided type of size 1000 mm for Fire Sprinklers, with 1'' Inlet Nipple BSPT,1/2" Outlet Reducer BSPT,0.7 m Square Supports Bar & Brackets(UL Listed) with all complete accessories as per direction of Engineer-in-charge.
60
39840
-
... More
Providing all materials, labour, T&P for laying of following dia M.S. heavy class pipes conforming to IS:1239 with ISI mark & required sizes of fitting like off set, bend, tee, reducer flange & flange joints etc. as per site condition including gas cutting by oxygen and acetelene gas flame, fitting and setting as per required size wherever necessary, jointing the pipes by electric welding confirming to IS specification and electrodes confirming to IS specification after 'V' grove cutting. Aligning the pipes inside the trenches including necessary excavation of earth work of required width & depth in all kinds of soil /rock and back filling or supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fasteners) or angle iron, G.I. pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per the approved specification including cutting holes and chases in brick/RCC wall/roof/chajja and making good the same to original condition. All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and then supply of the same shall also be included. Painting 2 (two) or more coats with synthetic enamel paint of Post office red shade over a coat of primer for above ground level & painting 2 (two) or more coats with anticorrosive epoxy paint for below ground level.
-
-
-
... More
Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approved specification including testing & commissioning the system.The cost inclusive of hire and running charges of welding generator set & all taxes, duties, transportation, hire & running charges of machineries, POL, to & fro charges with all consumables for all floors etc. all complete as per specification & direction of EIC. Make-SAIL/JINDAL/TATA
-
-
-
... More
100mm NB
15
42780
-
... More
80mm NB
10
15700
-
... More
65mm NB
10
13100
-
... More
50mm NB
10
10010
-
... More
40mm NB
10
6990
-
... More
32mm NB
15
9030
-
... More
25mm NB
25
11700
-
... More
PART - VI : AUTOMATIC FIRE ALARMING AND DETECTION SYSTEM:
-
-
-
... More
Supplying installation testing and commissioning of Microprocessor based Addressable Fire Alarm Control Panel (6 loop ) suitable for serving the followingg detectors & Devices in maximum with LCD display, complete withb) 2 Nos 12 Volt 40 Ah SMF battery, Battery backup and also provision for 2 Nos potential free Normally open contact per loop to be used for interlocking with provision for interface along PA Controller including call station in built suitable for 240 watt amplifier as per direction of Engineer-incharge.
1
582778
-
... More
Supplying installation testing and commissioning of Addressable Photoelectric type Smoke-Cum-Heat Detector, complete with base, isolator and accessories for above false ceiling as per direction of Engineer-in-charge.
110
429440
-
... More
Supplying installation testing and commissioning of Addressable Manual Pull Station(MPC), complete with addressable mini input module, back box and accessories as per direction of Engineer-in-charge.
5
16780
-
... More
Visual type Response indicators with LED indicating lamp, housed in suitable MS enclosure with acrylic cover fixed in flush with wall to operate in conjunction with smoke/Heat detectors.
110
57420
-
... More
Supplying installation testing and commissioning of Audio Visual Strobe, complete with mounting box and accessories and module if require as per direction of Engineer-incharge.
5
34510
-
... More
Supplying, installing ,testing and commissioning of Hooter Cum Strobe at 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication. With Control Module. The Hooter cum Strobe with Control Module shall be flush or surface mountable type with all accessories etc., complete and as per technical specification. The devices shall be of EN and LPCP listed.
5
27965
-
... More
Supplying installation testing and commissioning of a pair of 1.5 sq.mm single core flexible copper cable (2X1.5sq mm) to be laid within Existing MS conduit of suitable size to be erected above the wall or concealed, as the case may be, with all accessories as per direction of Engineer-in-charge.
120
4440
-
... More
Supply, delivery and laying of following sizes of PVC Conduit in surface/ in recess alongwith other accessories and 18 swg GI wire complete for Fire Alarm wiring including painting as required and as per direction of Engineer-in-charge.
-
-
-
... More
25mm dia
90
7740
-
... More
PART - VI : AUTOMATIC FIRE DETECTION SUPPRESSION SYSTEM FOR ELECTRIC PANEL :
-
-
-
... More
Supply,installation, testing & commissioning of 5 LB capacity Novec 1230 , DLP Assembly with automatic valve, push in connector for tube, 5 LB Novec 1230 gas , mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.
1
149753
-
... More
Linear pneumatic heat Detection Tube (size: 6 mm Outer Dia & 4mm inner dia) with all necessary fittings & supports.
25
65100
-
... More
Master Control Unit with Audio Visual Alarm With Wiring to Make Complete System Operational. The Control Panel Should have Provision for integration with Fire Alarm System.
1
6867
-
... More
PART - VII : MISCELLANEOUS WORK :
-
-
-
... More
Providing all materials, labour, T&P and laying of Centrifugally cast(spun) RCC non pressure pipes of class NP2 with socket & spigot ends confirming to IS-458 with ISI marked in standard lengths suitable for push on joints including lowering the pipes in to trenches to required depth blow G.L, with proper allignment & gradient, earth work excavation in all kinds of soil/rock of required depth with, back filling etc including testing, commissioning, dewatering( if required) fixing of rubber gasket as per IS-5382/1985 with ISI mark with all taxes & duties etc. all complete as per specification & direction of EIC.
6
6084
-
... More
Part-V Lift
-
-
-
... More
Supplying, installation, testing & commissioning of 8 nos Auto Passenger (544 Kg) machine room lift with microprocessor controlled Variable Voltage Variable Frequency(VVVF) drive with a speed of 1.0 mt/sec operating on 415 Volt 3 phase 50 c/s power supply, Automatic Rescue Device(ARD) with stainless steel car and doors with hairline finish and as per attached specification and travel & floor details given against each item (including all arrangements like wiring, car lighting & stator) as required & approved by EIC.(Make: OTIS/Kone/Johnson/ Thysenkrupp)
-
-
-
... More
(S+G+3 Upper Floor)Five nos of floors & Travel 14.95 mtrs(Approx).
2
2511718
-
... More
Lift Panels (1&2)
-
-
-
... More
Supply, installation, testing and commissioning of cubicle type sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earth bus etc as required.
-
-
-
... More
One (1) Incomer - 63 Amp, 25 KA, TPN MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB Digital Voltmeter and Ammeter with selector switch
-
-
-
... More
Busbar - 100 Amp Al busbar suitable for operation at 415 Volt, 50 Hz, 3 Phase Supply
-
-
-
... More
One (1) - Outgoing feeder with 32 Amp TPN ,10 KA MCB for lift supply
-
-
-
... More
Five (5) - Outgoing feeder with 16A DP, 10 KA MCB for 1 no. ARD Battery Charger, 1 no. Lift Well light,1 no. Lift Car lights, 1 no. Power Point & 1 no. spare.
-
-
-
... More
PANEL AS ABOVE
2
109402
-
... More
CABLE
-
-
-
... More
Supply, laying, connecting, testing & commissioning of following size of 1.1 kv grade multicore aluminium conductor XLPE insulated PVC sheathed armoured cable as per IS: 7098:1988 (Part-I) with upto date amendments etc. complete as required. Tagging on both the ends will be done with aluminium tags etc. complete as required.
-
-
-
... More
3.5C X25 sqmm
40
16920
-
... More
CABLE End Termination
-
-
-
... More
Supplying and making indoor end termination with brass compression gland (Heavy duty) and suitable aluminium lugs for following size of XLPE insulated PVC sheathed copper/ aluminium conductor armoured/ unarmoured cable of 1.1 KV grade including cost of ferrules, cable sockets, insulation tape & other accessories etc. complete as required.
-
-
-
... More
3.5 core x 25 sqmm Al. Lugs
4
1028
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements