Military Engineer Services Tender

Supply and laying well burnt sub class ‘B’ bricks locally available best quality laid dry in trenches for protection of underground cable all as specified and directed

M&L for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling,punning, well ramming complete all as specified and directed. Note: Thickness shall be measured after punning.

M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 2.0 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 2.0 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 25 sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

M&L for GI pipe light grade 40mm bore with all fittings laid in trenches/ walls/ floors/ poles/ road crossing including taking up/ down old pipe complete all as speciffied and as directed.

M&L for GI pipe light grade 50mm bore with all fittings laid in trenches/ walls/ floors/ poles/ road crossing including taking up/ down old pipe complete all as speciffied and as directed.

S&F LED Solar street light fitting 16 watt including galvanised steel pole in built , lithium ion battery ,solar panel,charge controller with dust down sensor complete.(Excavation and earth work shall be measure separately.all as specified and as directed

S & F LED street light of capacity 45 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have luminaries efficacy ≥110 lumens/watt, CRI70 ,PF 0.95, CCT≥5500, IP65 230v AC outdoor type, impact resistance IK 07, inbuilt protection against lightning , over voltage, short circuit and surge/spike protection device upto 10kV complete including taking down old unserviceable light fittings complete all as specified and as directed. all as specified and as directed. Make- Havells / Philips / Bajaj

S & F LED street light of capacity 60 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have luminaries efficacy ≥110 lumens/watt, CRI70 ,PF 0.95, CCT≥5500, IP66 230v AC outdoor type, impact resistance IK 07, inbuilt protection against lightning , over voltage, short circuit and surge/spike protection device upto 10kV complete including taking down old unserviceable light fittings complete all as specified and as directed. all as specified and as directed. Make- Havells / Philips / Bajaj

S & F sheet metal enclosure when MCB to be used 2 way, Single pole & neutral without bus bar complete all as specified and asdirected. Make :- Legrand / Havells

S&F MCBs, SP 6 to 32 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Make :- Legrand Model 4086 90 to 95 or equivalent model in Siemens / Schneider/L&T

S&F 1100 volts grade heavy duty flat cable of size 6 Sqmm 2 core, PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including replacing 4mm suspension wire including taking down old cable of any descrip[tion complete all as specified and as directed.

S&F 1100 volts grade heavy duty flat cable of size 10 Sqmm 2 core, PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including replacing 4mm suspension wire including taking down old cable of any descrip[tion complete all as specified and as directed.

S&F MCBs, SPN 6 to 40 Amps,10KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Make:Legrand model 4086 09 to 17 or equivalent model in Siemens/ Schneider/ L&T

M&L for PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping for the new/existing Steel Poles, cills, including necessary formwork (straight or curved) complete all as specified and as directed.

S&F in repair 40 watt LED post top made in die-cast aluminium with innovative glare free indirect lighting distribution & IP65 protection incl necessary pipe of suitable dia and nuts and bolts with necessary conncetions etc, including taking down old light complete all as specified and as directed. Cat part no. LHFOATE1T95W009 Havells or equivalent make as approved by ENGR-IN-charge.

S&F in repair gate light in aluminium die cast with modern artistic design and white PC diffuser suitable for retrofit LED lamps .Cat part no. LHFOAQE1TZ5K7X5 Make: Havells or equivalent make as approved by Engr-in-Charge

S&F in repair looping box of size 130mm x 130mm x 77 mm weather proof IP 66/67 including connector blocks four way having suitable size bolt to connect upto 6 sqmm x 2 core cable two nos with the help of suitable gland ,thimble nuts washers supports by flat aluminium clamps not less than 25 mm x3mm with suitable size nuts , bolts and washers inside and outside looping box including fixing with electric pole and taking out old one of any type complete as directed Make: Hansel ,cat part no KF3535G or equivalent make as approved by Engr-in-Charge

M&L for continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc.as required 4.0 mm dia galvanised iron or steel wire completed all as specified and as directed

M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m deep below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth lead wire 4 mm dia or 8 SWG bolted (with GI nuts, bolts & check nuts) and earth plate electrode at one end and connected to main switch board/ DBs etc. at the other, earth strip encased(protected) in and including 15 mm bore GI pipe medium grade with all fittings from top of electrode to main switch board/ DBs etc fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-2 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work complete all as specified and shown in electrical plate No 3 of SSR Pt-I complete all as specified and directed.