Military Engineer Services Tender

Supply , installation, testing,commissioning of chlorination chemical dosing system comprised of pressure pump & thermoplastic cylinder shape receptacle with cover of 100 ltr capacity for power free automatic water sanitiser conitionign treatment station with proportional dosing arrangement with following attachment etc complete all as specified and as directed. Make: - Declibac(Model ADS-PRO) equivalent as approved by GE. (a) Water inlet regulator (b) Overflow vent (c) Water oulet regulator (for standalone gravity flow and offline automatic gravity flow) (d) Drain valve (e) Fluid level controller (f) Sludge level Gauge (g) Station base assembly with station base buffer & multi cavity arrangement (thirteen Nos) (h) Station holding (j) Refill cavity lids (k) Inbuilt level switch and processor (l) Flexible connecting duct (m) Centrifugal pump capacity - 1 HP, 0.75 Kw and total head 6 Bars Note:- i) Any additiona/alteration requires in the existing pipe line or any fitting/fixture required for connection of the above items are deemed to be included in this rate.

Supply of chlorine tablets contained in plastic cylindrical sealed disposible sanitiser refill (dia 2.5 inches ± 0.5 inches height 10 inches ± 0.5 inches)_ for disinfection of drinking water with arrangement for cotrolled release of disinfectant in water, suitable for operation through dosing system etc complete all as specified and as directed. Make:- Declibac (Type Stequa 411 AE) equivalent as approved by GE. Note:- The product media should have heavy metal contaiminants below detectable limits & must pass the acute toxicity test (confirm to non toxicity for mammalian cells ) and safe for human health safety point.

Supply,installation, commissioning and testing in replacement of LT panel board of suitable shape and size as approved by the Engineer-in-charge, out door cubical type (415 volts, 50 Hz, 3 phase, 4 wire supply) floor block mounted, factory made, dust and vermin proof (protection class IP-54) made out of CRCA sheet for panel shall be mounted on 50mmx 50mm x 5mm angle iron frame and shall have channel base of appropriate size and mounted on PCC foundation built in PCC 1:3:6 type C-2 be using 40mm graded crushed stone aggregate including painted externally and internally providing one coat of any corrosive coating and finally epoxy powder coating of grey shade , platform height of the panel at least 2 feet from the ground level as recommended or directed by the Engineer in charge comprising of following etc complete all as specified and as directed . a) 03 Nos Aluminium bu bar 1600 amp capacity for phase, o1 No. Aluminium bus bar 1600 amp capacity for neutral duly supported on suitable size of epoxy insulator fixed in dust and vermin proof MS enclosure having adequate clearance between conductor and earth for easy maintenenace. These should have color coding for RYB and neutral to enable immediate identification. all the incoming connection to ACBs shall be made with suuitable size aluminium bus bars of rating 600 amp. b) Incoming:- ACB, 4 pole, 415 volt, AC supply, 800 Amp- 01 Nos Make:- Havells cat No -IHLLSEBF0400 equivalent in Siemens/ ABB/Legrand