Military Engineer Services Tender

Supply only ENCLOSED IMPELLER for 100Hp pump Kirloskar.

Supply only PUMP SHAFT Part No RH 276-410 for 100Hp pump Kirloskar.

Supply only WEAR RING SUC.SIDE CI for 100Hp pump Kirloskar.

Supply only WEAR RING DEL.SIDE CI for 100Hp pump Kirloskar.

Supply only WASHER DE CS for 100Hp pump Kirloskar.

Supply only WASHER -NDE CS for 100Hp pump Kirloskar.

Supply only GLAND ( CI ) for 100Hp pump Kirloskar.

Supply only LANTERN RING ( CI ) for 100Hp pump Kirloskar.

Supply only LIQUID DEFLECTOR ( CI ) for 100Hp pump Kirloskar.

Supply only BEARING 888 STEEL, for 100Hp pump Kirloskar. Make- SKF or equiv

Supply only SHAFT SLEEVE-SUC.SIDE (276-410) (250-280BHN) for 100Hp pump.

Supply only SHAFT SLEEVE-DEL.SIDE (276-410)(250-280BHN) for 100Hp pump Kirloskar.

Supply only SET OF KEY Part No SSOK3 -410/C-40 (one set consistsof 10 key) for 100Hp pump Kirloskar.

Supply only SET OF TIE BAR WITH NUTS & WASHER 40C8 ,( one set consists of 04 Nos) for 100Hp pump Kirloskar.

Supply Only INTERSTAGE BUSH FOR DIFFUSER WITH GUIDE VANES for 100 HP pump

Supply only GLAND PACKING for 100Hp pump Kirloskar.

Supply only OIL SEAL DE & NDE.

Supply only SET OF O RING 100Hp pump Kirloskar.

Supply only Stage casing 100 HP pump Kirloskar.

M&L for lifting of submersible pumpset 3 HP capacity with motor from open well for repair/rewinding after taking out burnt winding wire and re-winding of same with suitable size of super enamelled copper winding wire with necessary insulation and re-installing the same by proper assembling with connected pumpset, testing commissioning complete all as specified and as directed.

S & F in repairs, Start / Stop Push button complete all as specified and as directed..

S & F in repairs, digital Voltmeter/Ammeter complete all as specified and as directed..

S & F in repairs, RYB Phase indicator light set of three complete all as specified and as directed.

Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and as directed..

S&F in repairs, MCCB with Thermal - magnetic release 400 Amps, 4 Pole, 415V, Ics=100%Icu with breaking capacity 36K incl taking down old one, fixing in existing panel, complete all as specified and directed. Make : L & T Cat Part No. CM98403OOROOG/Legrand Cat Part No. 4220 06 to 07 or equivalent in Schneider/ ABB

S&F in repairs, MCCB with Thermal - magnetic release 250 Amps, 4 Pole, 415V, Ics=100%Icu with breaking capacity 36K incl taking down old one, fixing in existing panel, complete all as specified and directed. Make : L & T Cat Part No. CM92109OOP1OG/Legrand Cat Part No. 4202 48 to 49 or equivalent in Schneider/ ABB.

S&F in repairs, MCCB with Thermal - magnetic release 160 Amps, 4 Pole, 415V, Ics=100%Icu with breaking capacity 36K incl taking down old one, fixing in existing panel, complete all as specified and directed. Make : L & T Cat Part No. CM92109OOP1OG/Legrand Cat Part No. 4202 48 to 49 or equivalent in Schneider/ ABB.

Supply only CHLORINE TEST KIT with coloured ample complete with all testing fitments and OT solution in Rexene finish box, complete all as specified and as directed. Make- RMCO or Equivalent

Supply only OT Solution for Chlorine test(500ml) Make- RMCO or Equivalent

S & F in repairs, Rubber gasket joint suitable for 100 mm for spigot and socket fittings dia incl taking down old one. complete all as specified and as directed.

S & F in repairs, Rubber Gaskets for Pipe flanges suitable for 150 mm dia incl taking down old one complete all as specified and as directed.

S & F in repairs, Rubber Gaskets for Pipe flanges suitable for 100 mm dia complete all as specified and as directed.

M&L for earthing complete with copper earth plate electrode 60cm x 60cm x 3.15 mm buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with the top edge not less than 1.5 mtr below ground level connected to copper strip 20 X 3 mm as earth lead by means of bolts, nuts, check nuts and washers of steel and other end connected to earthing test point including funnel, watering pipe of 40 mm bore, light grade GI pipe, wire mesh, charcoal or coke and common salt in alternate layers all around the earth electrode compacted thickness 15 cm, earthing pit in PCC (1:3:6) type C1, 50 mm thick pre-cast RCC cover slab (1:2:4) type B1 set in CM (1:4), reinforced with 8 mm dia TMT bars @ 10 cm c/c and suitable handle of 10 mm dia MS round bars including earth work in excavation in soft/loose soil, disposal of soil not exc. 50 meter complete and testing on completion all as shown in electrical plate No-3 of MES schedule, part-I including dismantling of old earthing complete all as specified and as directed. NOTES 1). The unit rate include copper strip from top of earth plate upto 7.5 meter above ground level.

M&L for re-winding of 100 HP Centrifugal motor after disconnecting motor from pump, transporting the defective motor to repairs workshop located at Dimapur, taking out burnt winding wire of field coil and re-winding of field coil with suitable size of super enameled copper winding wire with necessary insulation materials including two coat of synthetic enamel paint of shade and writing the SM & MES No and re-fixing motor, pump on frame with new nuts bolts etc with allignment work and necessary connection to the terminal complete all as directed. Note: seperate parts like DE and NDE bearings, greasing, oiling, etc deemed to be include in quoted rate.

M&L for re-winding of 75 HP Centrifugal motor after disconnecting motor from pump, transporting the defective motor to repairs workshop located at Dimapur, taking out burnt winding wire of field coil and re-winding of field coil with suitable size of super enameled copper winding wire with necessary insulation materials including two coat of synthetic enamel paint of shade and writing the SM & MES No and re-fixing motor, pump on frame with new nuts bolts etc with allignment work and necessary connection to the terminal complete all as directed. Note: seperate parts like DE and NDE bearings, greasing, oiling, etc deemed to be include in quoted rate.

S&F PVC insulated single core unsheathed multistrand copper conductor for voltage 1100 V of size 70 Sqmm incl taking out old conductor of any description complete all as specified and as directed. Make: Havells or Equivalent