Military Engineer Services Tender

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

Supply and laying well burnt sub class ‘B’ bricks locally available best quality laid dry in trenches for protection of underground cable all as specified and directed

M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 35 sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, including taking down old one complete all as specified and as directed.

M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 25 sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, including taking down old one complete all as specified and as directed.

M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 2.0 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, including taking down old one complete all as specified and as directed.

M&L for GI pipe light grade 40mm bore with all fittings laid in trenches/ walls/ floors/ poles/ road crossing including taking up/ down old pipe complete all as speciffied and as directed.

M&L for GI pipe light grade 50mm bore with all fittings laid in trenches/ walls/ floors/ poles/ road crossing including taking up/ down old pipe complete all as speciffied and as directed.

S & F in repairs street light bracket made of GI pipe 40 mm bore light grade(bend to shape) , 1.2 metre long and fixed with Ms flat iron clamp(clamp shall be 40 X 5mm ), nuts, bolts and washers on pole complete all as specified and as directed.

S & F LED street light of capacity 45 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have luminaries efficacy ≥110 lumens/watt, CRI70 ,PF 0.95, CCT≥5500, IP65 230v AC outdoor type, impact resistance IK 07, inbuilt protection against lightning , over voltage, short circuit and surge/spike protection device upto 10kV complete including taking down old unserviceable light fittings complete all as specified and as directed. all as specified and as directed. Make- Havells / Philips / Bajaj

S & F LED street light of capacity 60 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have luminaries efficacy ≥110 lumens/watt, CRI70 ,PF 0.95, CCT≥5500, IP66 230v AC outdoor type, impact resistance IK 07, inbuilt protection against lightning , over voltage, short circuit and surge/spike protection device upto 10kV complete including taking down old unserviceable light fittings complete all as specified and as directed. all as specified and as directed. Make- Havells / Philips / Bajaj

M&L for replacement of PVC line separator in position to keep ACSR conductor as equal spacing suitable for 4 Wire system ,1100 volts, including fixing arrangement between the span of over head line complete all as specified and as directed.

M&L for replacement of PVC line separator in position to keep ACSR conductor as equal spacing suitable for 3 Wire system ,1100 volts, including fixing arrangement between the span of over head line complete all as specified and as directed.

M&L for replacement of PVC line separator in position to keep ACSR conductor as equal spacing suitable for 2 Wire system ,1100 volts, including fixing arrangement between the span of over head line complete all as specified and as directed.

M & L for Prunning / trimming the branches of trees if any along overhead line, 3 m on all side below/ above/ sides of overhead line and removing the same upto a distance of 150m, each span not exceeding 45 m complete all as specified and as directed.

M&L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete for poles , transformers base etc complete all as specified and as directed.

M&L for PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete for complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping for the new/existing Steel Poles, cills, including necessary formwork (straight or curved) complete all as specified and as directed.

M&L for erection and fixing of steel tubular swaged pole type 410 SP - 31 (9.00 metres long) confirming to IS- 2713 Part I to III 1980 with and including cast iron base plate, finial taper plug, nuts, bolts and washers etc. fixed in PCC foundation duly painted painted with two coats of Aluminium paint over a coat of red oxide primer with 30 cm of black ,yellow and white paint upto 1.2 mtr including preparation of surface and including dismsntling of old pole of any size and description with foundation, PCC coping and refixing of ACSR conductor with necessary connections etc. complete all as specified and as directed. Note; cost of exc , PCC and coping will be paid seperately

S&F in repair gate light in aluminium die cast with modern artistic design and white PC diffuser suitable for retrofit LED lamps .Cat part no. LHFOAQE1TZ5K7X5 Make: Havells or equivalent make as approved by Engr-in-Charge

S&F in repair looping box of size 130mm x 130mm x 77 mm weather proof IP 66/67 including connector blocks four way having suitable size bolt to connect upto 6 sqmm x 2 core cable two nos with the help of suitable gland ,thimble nuts washers supports by flat aluminium clamps not less than 25 mm x3mm with suitable size nuts , bolts and washers inside and outside looping box including fixing with electric pole and taking out old one of any type complete as directed Make: Hansel ,cat part no KF3535G or equivalent make as approved by Engr-in-Charge

S&F in repair stay assembly complete with accessories as shown in electrical plate No. 1 (loop type insulator, stay clamps, excavation and concrete measured separately) complete all as specified and as directed.

M&L for preparation of old painted surface of 9/11 metre long steel pole with cross arms and brackets and two applying two coats of aluminium paint and writing pole nos with synthetic enamel black japan paint at a height of 1.5 mtr above ground level and black and yellow strips of 30cm each 3 nos complete all as specified and as directed.

Dismantling the existing damaged glow sign board complete and remove from site.Supply & installation Glow Sign board (Size 16'x1.5'x1') made out of PGI sheet 1mm thick fixed with transparent PVC acrylic sheet cover of thickness 2.5 mm ,of colour as directed with letters and digits of approxsize 20x15 cm (Appx 52 nos ) of colour as directed ,fixed with and including 18 watts,240Volt LED tube light fitting with rods as required at site (@ 2 sqm per one LED fitting ) connecting with existing electrical point using 2 core PVC insulated ,1.5 sqmm PVC insulated and PVC sheathed stranded copper conductor cable of suitable length with switch ,fixing the sign board on GI pole /building using necessary fixing arrangements viz clamps,nuts bolts and washer and welding ,excavation and PCC work all as specified and directed Note: 1. Size of sign board and colour will be decided by the department as per the site requirement . 2. GI pole shall be used for fixing of sign shall only be measured and paid separately under relevant item of Sch 'A' .Remaining items are deemed to be inclusive in the item rate.

Dismantling the existing damaged glow sign board complete remove from site.Supply & installation Glow Sign board (Size 16'x1.5'x1') made out of PGI sheet 1mm thick fixed with transparent PVC acrylic sheet cover of thickness 2.5 mm ,of colour as directed with letters and digits of approxsize 20x15 cm (Appx 54 nos ) of colour as directed ,fixed with and including 18 watts,240Volt LED tube light fitting with rods as required at site (@ 2 sqm per one LED fitting ) connecting with existing electrical point using 2 core PVC insulated ,1.5 sqmm PVC insulated and PVC sheathed stranded copper conductor cable of suitable length with switch ,fixing the sign board on GI pole /building using necessary fixing arrangements viz clamps,nuts bolts and washer and welding ,excavation and PCC work all as specified and directed Note: 1. Size of sign board and colour will be decided by the department as per the site requirement . 2. GI pole shall be used for fixing of sign shall only be measured and paid separately under relevant item of Sch 'A' .Remaining items are deemed to be inclusive in the item rate.

Supply and fixing sign board made out of stainless steel 50x50 mm square bar (Sign board Size 3'x2') with 2.5 mtr both side 50 mm dia stainless steel with transparent PVC acrvlic sheet of thickness 2.5 mm, of colour as directed with letters and digits of approx size 8x8 CM (Appx 50 Nos ) complete all as specified and directed

S&F in repair 40 watt LED post top made in die-cast aluminium with innovative glare free indirect lighting distribution & IP65 protection incl necessary pipe of suitable dia and nuts and bolts with necessary conncetions etc, including taking down old light complete all as specified and as directed. Cat part no. LHFOATE1T95W009 Havells or equivalent make as approved by ENGR-IN-charge.

M&L for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling,punning, well ramming complete all as specified and directed. Note: Thickness shall be measured after punning.