Military Engineer Services Tender

Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed .

Removing exvated material to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed .

M&L for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down to 23cm thickness complete all as specified and as directed.

Materials and labour for brick protection cover to underground cables with sub class ‘B’ over burnt brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed.

M & L for Earthing complete with galvanized steel earth plate 60cm x 60cm x 6mm thick electrode, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI strip 25 x 4mm size up to test point by means of nuts, bolts, check nuts and washers of GI including excavation and earth work, PCC 1:3:6 type C-1 pit, 20mm bore dia GI pipe, medium grade pipe for watering arrangement and 40 mm bore dia GI pipe, light grade for protection of earth strip, 50mm thick RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 15cm C/C both ways and with handle made out of 10mm dia bars, funnel, wire mesh etc. as shown in electrical Plate No. 03 of SSR Part-I connected to earthing test point including taking down old unserviceable material and testing on completion complete all as specified and as directed. Note:- Please note that earth strip alongwith protection upto 7.5m is included under this item.

M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4mm galvanised iron strip complete all as specified and as directed.

Supply & Fixing 1200mm BLDC 5 star ceiling fan with regulator enable motor power input 27 watt with 10% tolerance , motor insulation B type , 230-240V 50Hz AC supply 350 rpm , 225 CMM air delivery service value minimum 7.4 with complete set 3 blade , canopy, down rod , Shackle remaining all accessories including nut & bolt washer complete all as specified and directed.

M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet complete all as specified and as directed.

Supply and fix exhaust fan, steel body heavy duty AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers complete all as specified and as directed.

Supply and fix exhaust fan, steel body heavy duty AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers complete all as specified and as directed.

Supply and fix exhaust fan, steel body heavy duty AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed.

Supply and fix Steel D-hook hanger Heavy duty with M10X75mm fasteners for hanging chandelier, ceiling fan complete all as specified and directed.

Cutting opening in cement concrete walls (any description) for exhaust fans etc (with or without reveals) or enlarging existingh openings, including trimming surfaces to receive rendering complete all as specified and directed

M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint

S&F Galvanised Iron tubes, light grade 50mm dia bore wih and including all fittings and fixed complete to walls and ceiling or laid on floors etc, etc complete all as specified and directed.

M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping/PVC Conduit pipe medium grade including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required for One light controlled by one, one way switch. at site complete all as specified and as directed.a

M&L for Switch piano flush type single pole, one way 5A etc complete all as specified and as directed.

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock etc complete all as specified and as directed.