Military Engineer Services Tender

M&L for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling,punning, well ramming complete all as specified and directed. Note: Thickness shall be measured after punning.

Supply and laying well burnt sub class ‘B’ bricks locally available best quality laid dry in trenches for protection of underground cable all as specified and directed

M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 120 sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, including taking down old unserviceable UG cable any type complete all as specified and as directed.

M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 95 sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, including taking down old unserviceable UG cable any type complete all as specified and as directed.

M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 70 sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, including taking down old unserviceable UG cable any type complete all as specified and as directed.

M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 50 sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, including taking down old unserviceable UG cable any type complete all as specified and as directed.

M&L for cutting bushes , grass throny , small plants/ tree up to hight 5M in and around the E/M installation and electric FPB and including surface dressing and removing the material at a distance not exceeding 50M all as specified and directed

Supply, install, test commissioning of LT Panel of size as per design made out of 2.00 mm thick mild steel CRCA sheet and angle iron frame front door openable of totally enclosed and vermin proof powder coated complete with 04 Nos aluminium strip busbar mounted on porcelain insulator including internal wiring using suitable size copper conductor complete all as specified and directed. MAIN INCOMER (a) MCCB 300 Amps 4 pole 415 Volts,adjustable type,36 kA Make- L&T / LEGRAND/HAVELLS -01 no OUTGOING (a) MCB 100 Amps, 4 pole, 25 kA, adjustable type, Make- L&T / LEGRAND/HAVELLS -02 nos (b) MCB 63 Amps, 4 pole, 25 kA, adjustable type, Make- L&T / LEGRAND/HAVELLS -02 nos (c) Digital Volt meter rating 0 to 500 Volts flush type -01 no (d) Digital Ammeter rating 0 to 300 Amps flush type -01 no (e) Volt meter selector switch (f) Amp meter selector switch (g) CT coil copper wound ,of ratio 300/5 -01 Set (h) Indication lamp with neon lamp ,R-Y-B -01 Set (j) Bus bar chamber 400 Amps, 3 strips & neutral 200 A Aluminium -01 Set

M&L for preparation of old painted surfaces removing dust and other deposited materials by scrapping from LT panel board of size 1.50m x 0.80m x 0.45m and painting of LT panel board with two coat synthetic enamel paint incl writing 50mm size figure/letter over black background marking panel board No substation nos with synthetic enamel paint colplete all as specified and as directed.

M&L for earth continuty conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or any other indicated situation for loop earthing etc as required 32 x 6 mm dia galvanised iron or steel wire

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried in ground (Earth pit not less than 2.25 m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level , connected to galvanised iron earth strip 32 mm x 6 mm as earth lead by means of nut, bolts check nut and wahser of galvanised iron or steel etc all as shown in electrical plate No.3 of SSR part I- 2009 connected to earth test point all as specified or indicated including PCC pit in PCC (1:3:6) type C-1 cast iron MS frame, 50 mm thick pre cast RCC (1:1 1/2:3) type nominal mixed cover slab rainforced with 8 mm dia MS deformed bar 15 C/C and suitable for handle cast including necessary exavation earth work in soft/loose soil and disposal of soil to adistance n exc 50 m and charcoal 120Kg, salt 105 kg, funnel with water pipe ,wire mesh, copper logs etc GI protection pipe of size 15 mm bore dia including demolition of old earthing complete including testing all as specified and directed by Engr-in-charge.

Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 11 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and as directed..