Military Engineer Services Tender

M & L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 3% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thick ( Below or above ground) complete all as specified and directed.

Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as directed.

M&L for 25 mm thick PCC(1:2:4) type B0 (using 12.5mm graded stone aggregate)as in floors to receive tiles complete all as specified and as directed

M &L for providing and fixing stainess steel (Grade 304 ) railing made of hollow tubes ,channels, plates, etc, including welding ,grinding, buffing , polishing, and making curvature ( where ever required ) and the fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accesories and stainless steel dash fasteners stainless steel bolts etc of required size on the tip of the floor or the side of waist slab with suitable arrangements including taking down complete all as specified and as directed

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile and screed bed of 15 mm thick in cement mortar (1:4) complete all as specified and as directed.

M&L for coloured Non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match colour of tiles, over 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets.

S&F suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement Design Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed.

S&F for 4mm thick, plywood, grade BWR,type BB, fixed with nails to timber frame work on wall complete all as specified and as directed.

S & F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.

S & F Solid PVC Wall Lining consisting of 5 mm thick single side prelam wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.

Dismantling timber scantling 40sqcm and over in section as in unframed work in any position complete all as specified and as directed.

M&L for 2nd class hard wood, in scantlings, clean sawn timber as complete all as specified and as directed.

M & L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.