Military Engineer Services Tender

M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation etc complete all as specified and as etc complete all as specified and as directed. Note: Punned thickness shall be considerd for measurment purpose

M & L for well burnt bricks sub class B old size laying in trenches perpendicular to axis of the cable etc complete all as specified and as etc complete all as specified and as directed.

Supply & laying tubes 'light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore including taking out unsv GI tubing etc complete all as specified and as etc complete all as specified and as directed.ke:- Jindal/TATA/Prakash surya

M&L for LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm. 4 core complete all as specified and directed by Engr -in- Charge.

S&F in replacement LED aviation light luminaries comprising of alluminium housing with polycarbonate encloser with 302 nos LED ,including cable for connection after taking down old unserviceable light fittings,etc complete all as specified and as etc complete all as specified and as directed.

Taking down lumanaries of High Mast and servicing/greasing the motor, gear, Chain,all moving parts etc and restoring the lumanaries to top of the mast of pole,canopy fixing bracket including charges for machinery required for fixing at top position etc complete all as specified and as etc complete all as specified and as directed. Note:Spare parts shall be measured and paid separately

Repair/rewinding of three phase motor of capacity 1HP/1.5HP after taking down from existing location ,refixing the after repair etc complete all as specified and as etc complete all as specified and as directed.

M&L for Replacement of chain with existing size after taking down from existing location etc complete all as specified and as etc complete all as specified and as directed.

Supply of High mast flexible rubber type insulated Copper cable of size 4 Sqmm 4 Core for high mast etc complete all as specified and as etc complete all as specified and as directed.

Supply of High mast flexible rubber type insulated Copper cable of size 6 Sqmm 4 Core for high mast etc complete all as specified and as etc complete all as specified and as directed.

M&L for Repair/ maint of lamp door of high mast light fitting including replacement of hinges etc complete all as specified and as etc complete all as specified and as directed.

M&L for Repair/maint of winch and electric box of high mast etc complete all as specified and as etc complete all as specified and as directed.

S & F in replacement of double drum winch assembly for high mast of capacity 350 kg to 750 kg mild steel power source motorised type electric winch etc complete all as specified and as etc complete all as specified and as directed.

S & F in replacement of lifting wire rope, stainless steel of existing gaudge up to 10 mm for high mast etc complete all as specified and as etc complete all as specified and as directed.

S & F in replacement of high mast light fitting bracket as per existing at site etc complete all as specified and as etc complete all as specified and as directed.

M&L for earthing complete with MS galvanized plate of size 60cmx60cmx6mm as earth electrode, burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron/welding or steel all as shown in electrical plate No 3 in SSR Part I of 2009 connected to earthing test point all as specified complete with excavation & earth work, PCC pit with 6mm thick CI /MS cover having suitable handle (10mm MS Rod) with frame & locking arrangement, 20mm dia GI medium grade watering pipe with GI funnel with wire mesh 40mm bore GI pipe medium grade ISI marked) for protection of earth lead conductor and testing on completion complete all as specified and as directed by Engr-in-Charge. Note. (i) Earth test report to submitted by contractor to this office (ii) Earth result should be not more than specific value.

S&F in repair 4 pole power contactor 40 Amps 415 volts, 3 phase AC-3 rating, ML2 type complete with 220-240 volts AC coil etc complete all as specified and as directed.

S&F in repair analog timer switch suitable for 40 Amps capacity at 415 volts AC 50 Hz supply including all necessary connections etc complete all as specified and as directed. Make : Legrand/ ABB/ L&T

Disconnecting/Taking down UNSV Street / Perimeter / Security Roadway / fittings from pole/Structure and repair / checking and identifying of faulty spares wirings, cleaning of fittings, cover, etc. and re-assembling the same after repair, testing and refixing in original position and reconnecting with the electrical line etc complete all as specified and as directed. (Spare parts shall be measured and paid separately under relevent items here in after.)

Material and labour in replacement of unsv light fittings of existing high mast with LED energy saving, environmental friendly, LED flood light 200/210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp suitable for high mast/tower lights as application including openign and fixing of nuts, bolts and washers on existing high mast/tower/wksp structure properly etc complete all as specified and as directed.

S&F in replacement of LED flood light fitting driver ISI marked of capacity 120 Watt as per sample etc complete all as specified and as directed.

S&F in replacement of LED flood light fitting driver ISI marked of capacity 200 Watt as per sample etc complete all as specified and as directed.

Material and labour in replacement of unsv light fittings of existing high mast with LED energy saving technology, environmental friendly,corrosion resistant, LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection complete with driver and lamp suitable for high mast/tower lights as application including openign and fixing of nuts, bolts and washers on existing high mast/tower/wksp structure properly etc complete all as specified and as directed. Make: Havells/Crompton/Bajaj.

Supply, install, testing and commissoning LT panel made out of 3mm thick CRCA sheet, double door type with slopy canopy suitable for outdoor installation with with degree of protection IP 54, with angle iron frame made of 40 x 40 x 6mm at vertical corners & Medium Channel at base of Panel board floor mounted, dust and vermine proof, suitable for voltage 415 V 3 Phase 4 wire weather proof, with separate hinge door for each compartment with locking arrangement, with back door common openable (Screwed), grouted in PCC 1:2:4 complete incl painting the steel surfaces with two coats of zinc chromate primer & two coats of epxoy paint , type tested, with TPN copper bus bar chamber 250 Amp capacity and connections with spring loaded fix connect terminals with temperature resistance of 40 degree celcius to 120 degree celcius with cable entry suitable size of glands terminals & thimbles all as specified and prewired with suitable size of pvc insulated copper conductor cable duly mounted on angle iron frame fixed on PCC blocks fixed with grouted bolts nuts and washers complete including supply fixing and making provisions of the following etc complete all as specified and as durected.:-(i) MCCB 63 Amp, 4 pole, 50 Hz 415V, rupturing capacity 25 KA, thermal/magnetic settings - 01 No as incoming.(ii) MCB 40 Amp TPN , 50 Hz, 415 V, with rupturing capacity 16 KA - 02 Nos as outgoing for security lights.(iii) MCB 40 Amp 4 pole, 50 Hz, 415 V with rupturing capacity 16 KA, 'C' Curve type - 01 Nos as outgoing for winch motor.

Item No. 27.00 contd.. (iv) MCB 10 Amp single pole, 50 Hz, 230 V with rupturing capacity 10 KA, 'C' Curve type-01 Nos as outgoing for aviation lights.(v) Street light time switch multi functional digital for automatic switching on or off if street lights at a preset time model Astro time switch with USB key, 1 Channel all as directed = 01 Nos.(iv) Surge protection device 15 KA 2 Modules:- 01Nos.(vii) Indicator set LED type RYB 01 set of 3 pcs (vii) Contactor 40A 3 module having operating coil voltage 415V with auto/manual switching :- 02Nos (x) Digital Volt Meter (0-500 Volts) and Ampere Meter (0-100 Amps) With selector switch.(xi) Forward and Reverse switch for winch control of rising/Lowering the luminairs etc complete all as specified and as directed.. Note : The panel circuit design shall be as per recommendation of OEM of High mast and approved by GE.

Taking out the connection from mains and carried out bypass arrangement and disconnectin the connection of Online UPS upto 30 KVA and transporting to workshop and return back after repair with replacement of following items etc complete all as specified and as directed.Note :Cost of Item will be paid seperately

Supply only the cared IGBT card with fixing etc complete all as specified and as directed.

Supply only the driver card complete etc complete all as specified and as directed.

Supply only control card complete etc complete all as specified and as directed.

Supply only the Transformer copper wound suitable as per sample etc complete all as specified and as directed.

Repair/ Replacement of maintenance free starting battery 12 volts,42 AH etc complete all as specified and as directed. MAKE : EXIDE/ AMARON /or equivalent as approved by GE.

Opening dismantling and disconnecting all water Connection and electrical connection of Washer Extractor/ hydro extractor capacity Upto 15 Kg make Superfab and Reassemble the same for repair after removing nuts and bolts including oiling, greasing and alignment of inner basket, alignment of shaft, pulley alignment, contact set of contactor cleaning, servicing and cleaning of pneumatic kits, air filter cleaning, cleaning the drain system and turning work and reassemble the same for the smooth functioning of the machine etc complete all as specified and as directed. Note: The Washer extractor/ hydro extractor shall be repaired and serviced by OEMs Rep/ his auth rep only.

S & F drain pipe of existing capacity and make etc complete all as specified and as directed.

Opening dismantling and disconnecting all water connection and electrical connection of Drying tumbler capacity of 15 kg make Superfab and reassemble the same for repair after removing nuts and bolts including Oiling, cleaning, servicing and greasing, balancing and alignment of cylindrical basket, balancing of blower, shaft turning, cleaning and servicing of steam radiator for the smooth functioning of the machine etc complete all as specified and as directed. Note: The Drying tumbler shall be repaired and serviced by OEMs Rep/ his auth rep only.

S & F in replacement of strip heater etc complete all as specified and as directed.

Opening dismantling and disconnecting all water connection and electrical connection of flat work Ironer with double roll make superfab and Reassemble the same for repair after removing nuts and bolts including Oiling, cleaning, servicing and greasing, balancing and alignment improvement of chest and rollers, servicing and cleaning of Pneumatic kits, servicing of electrical panel and variable frequency drive for the varying of speed of motor etc complete all as specified and as directed.

Disconnecting all electrical connection of the air compressor and taking out cylinder from the compressor and repair the same with replacement of Engine oil, key of shaft and re-fixing the same Including testing etc complete all as specified and as directed.

S&F in replacement of Water solenoid motorized Pneumatic valve of existing size and make for inlet and outlet etc complete all as specified and as directed. Make: Sant/Kartar/SK

M &L in replacement of screen of panel of washer extractor machine as per existing etc complete all as specified and as directed. Make : Kinco/Fabtech/Fabcare

Disconnecting the electric induction motor from the existing machine of any size and taking out the unserviceable winding wire complete and cleaning the slots, rewinding the motor with super enameled copper windings wire of existing gauge including all other insulating material of the capacity upto 03 HP of any make and re-fixing the same after repair of existing machine Including testing etc complete all as specified and as durected.

M&L in replacement of iron steam resting pad etc complete all as specified and as directed.

M&L in replacement of MPD for Drying tumbler etc complete all as specified and as directed.

Supply and fixing of 4.00 Sqmm 4 core multi stranded copper conductor cable (FRLSH) 1100 Volt grade drawn through 20/25 mm dia PVC Casing Caping after and inclduing taking down existing submain wiring etc complete all as specified and as directed.

M & L for replacement of Solar Evacuated Tube Collector for upto 200 litre capacity and fixing new Solar plate with all new steel nut bolts of suitable size, replacement of gasket of all flange joints etc complete all as specified and as directed.

M & L for replacement of Solar Flat Plate Collector upto 200 litre capacity and fixing new Solar plate with all new steel nut bolts of suitable size, replacement of gasket of all flange joints etc complete all as specified and as directed.

Opening dismantling and disconnecting all inlet/ outlet connection and electrical connection of Oil Fire Incinerator and reassemble the same for repair after removing nuts and bolts including Oiling, cleaning, servicing and greasing, balancing and replacing of unsv parts, for the smooth functioning of the machine etc complete all as specified and as directed. Note: (i) All the components reqd for repairing to make the incinerator serviceable shall be provided by the contractor and measured separately.. (ii) The oil fire incinerator shall be repaired and serviced by OEMs Rep/ his auth rep only.

Supply only Benton Burner ST 133K etc complete all as specified and as directed.

Supply only Thermo coupler etc complete all as specified and as directed.

Supply only ING Transformer etc complete all as specified and as directed.

Supply only Nozel etc complete all as specified and as directed.

Supply only QRBI Photocell etc complete all as specified and as directed.

Supply only Teamparature controller etc complete all as specified and as directed.

Supply only Water Pump etc complete all as specified and as directed.

M & L for refactory casting etc complete all as specified and as directed.

Dismantling the main driving shaft of forward/reverse drive of EOT crane after unscrewing nuts, bolts, washers including other connected accessories with shaft such as breaking assembly, coupling, bearings rings, gear box lowering down the smaller portion of shaft from up to 30' approximate height for removing and threading, repairing manufacturing cutting teeth keys one Nos bearing housing cabinet and replacement of one Nos tapper bearing welding of foundation rest pad making drills holes in rest pads matching with main foundation of trolly, cleaning, greasing and oiling of all the bearing, bearing housing, gear box etc complete for smooth functioning including providing nut, bolts with locking arrangement & washers of any type/size as site requirement complete including re-assembling of crane etc complete all as specified and as directed.(Capacity of crane - 2 Ton )

Dismantling of micro -up and down drive arrangement of EOT crane after un-screwing L- key bolts/screws nuts, washers etc which includes gear box of micro drive main box of up -down drive, braking arrangements including dismantling of 3 set (3 pair) of micro coupling, micro-drive arrangement for under taking repair including getting down all as dismantled parts from existing platform at a minimum height about 20' to 30' etc complete all as specified and as durected. (capacity of Crane 2 Ton )

Dismantling/ lowering of burnt flame proof/weather proof three phase 440 volts , 50 Hz , 960 RPM , class F, 5 HP induction motor from platform complete including strip opening the same and rewinding with super enameled copper winding wire of same size /gauge as existing earlier complete including all backing material , insulation material and re- installation the same at original site etc complete all as specified and as directed.

All as per item No. 59.00 (here-in-before) but capacity of motor 3 HP.

All as per item No. 59.00 (here-in-before) but capacity of motor 1 HP 1440 RPM.

S&F Power contactor 3 pole 16 Amp etc complete all as specified and as directed.

S&F Power contactor 3 pole 40 Amp etc complete all as specified and as directed.

S&FOver load relay 1.7 to 2.4 Amp etc complete all as specified and as directed.

S&F Main bearing as per site requirment suitable for 2 Ton cap crane etc complete all as specified and as directed.

M&L for Breake oil suitable for EOT crane cap 2 Ton cap etc complete all as specified and as directed.

M&L for Grease suitable for EOT crane cap 2 Ton cap etc complete all as specified and as directed.

Repair, maint and making the fully functioning of electric operated crane of cap 2 Ton after checking long travell motion , cross travel motion , hoisting motion (electrically and mechanically) etc complete all as specified and as durected.