Military Engineer Services Tender

M&L for Switch piano flush type single pole, one way 5A complete all as specified and as directed.

M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type complete all as specified and as directed.

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed.

M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc.

S&F for LED Light fitting 1 x 20 watt (4 Ft), Wall/ Surface mounted, intergrated type with all accessories internally prewired and including connecting up with and including three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed.

Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt, 230 V AC, outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp, bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with and including GI bracket made out of 25mm bore light grade 1.2 mtr, bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia including drilling of holes as reqd with clamps made out of MS strips 40x6mm duly painted and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting complete all as specified and as directed.

Supply & Fixing 1200mm BLDC 5 star ceiling fan with regulator enable motor, power input 27 watt with 10% tolerance, motor insulation B type , 230-240V, 50Hz AC supply, 350 rpm, 225 CMM air delivery, service value minimum 7.4 with complete set 3 blade, canopy, down rod , Shackle etc all accessories including nut & bolt washer as complete all as specified and as directed. : Usha/Bajaj/CG

M&L for cross arms, bracings, supports, clamps and back plates fabricated from steel section including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of synthetic aluminium paint (For MS Clamps and Hooks) complete all as specified and as directed. Note: The water tank staging under Item No 50 will be measured and paid under this item only.

M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with 200 Amp rated copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.

M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. Note :MCB SPN/SP will be measured and paid separately.

M&L for MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.

M&L for MCB SP 6-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed.

Supply & laying medium grade galvanised tubes 50mm dia bore with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables complete all as specified and as directed.

Supply and laying medium grade galvanised tubes 15mm dia bore with all fittings, fixed complete to walls, poles, laid in floors/trenchs/road crossing including complete all as specified and as directed.

S&F Stop valves, cast copper alloy, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions of dia 15mm bore and fixed complete all as specified and as directed.

S&F 15mm bore Bib tap fancy type chromium plated with long shank complete all as specified and as directed.

M&L for sub main wiring with two runs of 4.00 Sq mm and one run of 4.00 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- Two runs of 4.00 Sq mm + one run of 4.00 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length. Make:- Richa/RR Kabel/Finolex Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richa

Supply, Fixing and testing of vertical type wall mounted storage water heater of Capacity 25 Ltrs BEE 5 Star rated or minimum Standing Loss of 0.511 kWh , 240V, 50Hz with Maximum power consumption of 2KW , dry powder fero glass line coating technology for inner tank with incoloy heating element with minimum 4 years warranty , ABS outer body , 2 units of PVC connection pipe with length of 450mm length for hot and cold water supply with complete Accessories complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in soft /loose soil complete all as specified and as directed.

Returning filling in including spreading, leveling,watering and well ramming in layers not exc 25 cm in soft /loose soil complete all as specified and as directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.

M&L for sand cushioning to full width of trenches for protection of cable with clean and dry sand including punning down complete all as specified and as directed. Note: Punned thickness shall be measured and paid.

M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed

M&L for Road / Cutting of roads for passing cable including make good damaged surface with cement concrete 1:4:8 type D2 ( using 40mm graded stone aggregate)/black bitumin carpet complete all as specified and directed.

Supply and fix of GI pipe 40 mm bore light grade for protection of cable including provision of clamps, nut, bolts etc required for fixing pipe along pole / wall / laid under the road / laid under the floor or in trenches complete all as specified and directred by Engineer-in-Charge.

Supplying, laying, jointing and testing and commissioning 150 sqmm, 3.5 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor and PVC sheathed LT cable 1100 volts grade conforming to IS-7098 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge.

Supplying, laying, jointing and testing and commissioning 70 sqmm, 3.5 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor and PVC sheathed LT cable 1100 volts grade conforming to IS-7098 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge.

Supplying, laying, jointing and testing and commissioning 25 sqmm, 4 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor and PVC sheathed LT cable 1100 volts grade conforming to IS-7098 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge.

Supplying, laying, jointing and testing and commissioning 10 sqmm, 2 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor and PVC sheathed LT cable 1100 volts grade conforming to IS-7098 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge.

Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 35 Sqmm 3.5 core laid in trenches as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe shall be measured and paid separately under respective item.

Supply and laying or fixing or passing through pipe, 1100 Volts garde heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed with normal cross sectional area 4 sqmm 2 core complete all as specified and directed.

M&L for VTPN DPX 4 way,double door 415 Volts, 50 Hz, IP 43 IK 09 sheet steel, powder painted, with 02 neutral link & 02 earth bar and cable ties for cable management suitable for fixing of MCCB as incomer and MCB SP/TP as outgoing MCB DBs and making good the disturbed surfaces to match with existing specification , complete all as specified and as directed.. Note : MCBs will be measured and paid separately.

M&L for MCCB 4 Pole, 415 V, Adjustable type, 125 Amps with breaking capacity 16 KA taking down old unsv MCB complete all as specified and as directed.

Supply and fixing of rigid metallic conduit 20mm medium grade ISI Marked fixed to the pole by using suitable size of clamps, nuts, bolts and washers for drawing of service connection wire for electric installation complete all as specified and directed.

S & F PVC street light junction box of size 250x200 x105mm with front openable shutter and locking arrangement with and including one 6 Amps MCB and four way terminal fixed on porcelain insultor and fixed to pole with MS flat iron clamp 25 mm x 3mm size with nuts and bolts washers, etc complete all as specified and directed. Make: Sintex/Presto/Bajaj

Material and labour for GI bracket for fixing of street light fitting, made out of 40mm bore GI pipe, light grade of length not less than 1.50 mt, 45 degree bend to shape and fixed on pole with 2 Nos of FI clamps of 40x5mm of suitable length fixed by means of bolts, nuts & washers complete all as specified and directed.

Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as per specified and as directed. Make: Crompton/ Bajaj/Wipro.

Supply and erect Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.00 metres long), as per IS-2713 including painting with one coat of black bituminous paint through out internally and externally up to ground level and remaining external surfaces of poles shall be painted with two coats of aluminium paint over a coat of red oxide, zinc chrome primer including dismantling the old steel tubular pole, complete all as specified and as directed. Note: Excavation & earthwork , PCC foundation & coping shall be measured & paid separately

M & L for PCC 1:3:6, type C-2, (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for providing cement concrete Type B-1, 1:2:4 (20 mm graded stone aggregate) as in coping of poles including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for Triple pole and earth encolsure with a three pin and earth plug with socket complete suitable for one triple pole MCB complete all as specified and as directed.

Supply, Installation & Commissioning Feeder Pillar Box Factory Made (CPRI approved Manufacturer), made out of 3.15mm thick for Load Bearing and 2.00mm thick for Non-load Bearing CRCA Sheet, Outdoor Cubical type, with Locking Arrangement, Fully Compartmentalized, Totally Enclosed Weather and Vermin Proof suitably ventilated 440 Volts, 50 Cycles, AC Supply having IP-54 Protection as per IS-2147 of 1962 with Pre-treatment and Powder Coated of approved Colour with Mild Steel Angle Iron 40x40x5.0mm Frame Work/ Supports, grouting Legs in Cement Concrete 1:2:4 (20mm graded stone aggregate) Block of size 300x300x450mm including necessary Formworks, Earth Works, etc., Providng all Electric Connections and Testing, complete all as specified and as directed and Comprising with including to accumodating the followings:- (a) Copper Bus-bar 4 Strip, 400mm long, 250 Amp, 415 Volt - 01 Set (b) MCCB 200 Amp, 4 Pole , 25 kA, 230 Volt - 01 No. (c) MCCB 63 Amp, 4 Pole25 kA, 230 Volt - 01 No (c) MCCB 4 Pole 32 Amp, 16 KA Pole, 25 kA, 415 Volt - 04 No. (d) Automatic Star Delta starter 3 Phase for 1-5 HP Motor-03 set (e) Digital Amp Meter 0-40 Amp with CTs of suitable ratio & Selector - 03 No. (f) Digital Volt Meter 0-500 Volt - 01 set (g) Indicating Lamp (RYB), LED type - 01 Set

Supply, installation, testing and commissioning of commercial type wall mounted electric chimney made out of IS Certified 16 SWG (304) stainless steel Square pipes and sheets with front turned down, angular frame work fully welded with the following items :- (i) Two Burner Indian Cooking Range 48" x 24" x 34" with Stainless Steel Hood 48" x 30" x 22" . Make of burner as approved by GE. (ii) Two Nos 18 Inches Heavy Duty Exhaust Fans RPM 2800, suction capacity 850 cum/hr of approved Make in MES above Stainless Steel Hood. Make : CG or Equivalent make approved MES (iii) Civil works such as breaking of existing slabs, plaster and repairing of slabs, matching surfaces with existing one etc. (iv) Transportation

Supply and fixing for 25mm dia bore Tubes, 'Meduim grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. Make: finolex/Richa/RR Kabel. Make of caping/casing & PVC boxes: Prestoplast/finolex/Supreme/Richa

Supply and fixing for 40 MM dia bore Tubes, 'Meduim grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing for 25 Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and fixing rotational moulded polythylene water storage tank 3 layer ISI Marked with lid cylindrical vertical with closed top hoisted mounted on staging /roof of 1000 ltr capacity with and including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 25 mm dia with staging complete all as specified and as directed. Note: The water tank staging will be measured and paid under item No. 11.00.

Supply and fix UPS for 30 Min back up three phase AC input 300 to 450V and out put single phase AC out put Voltage 230V +/- 1% of capacity 15 KVA including batteries all as specified and directed by Engr- in- Charge

Supply, install, test and commissioning commercial type wall mounted electric chimney made out of 16 SWG (304) stainless steel with front turned down, angular frame work fully welded with the following items :- (i) Chimney box with Stainless Steel Hood of size 24 Inch x 24 Inch x 24 Inch (ii) Chimney box with Stainless Steel Hood of size 48 Inch x 24 Inch x 34 Inch (iii) Chimney box with Stainless Steel Hood of size 66 Inch x 24 Inch x 34 Inch (iv) Three Nos 18 Inches Heavy Duty Exhaust Fans including fan box of size 22 Inch x 22 Inch x 22 Inch of approved Make in MES (v) Stainless steel Ductin of 16 SWG (304) length as per site requirement. (v) Civil works such as breaking of existing slabs, plaster and repairing of slabs, matching surfaces with existing one etc (vi) Electrical works such as point wiring with suitable size of wire, switch, socket outlet, ceiling rose, MCB DB etc of approved make in MES to be considered (vii) Transportation

Supply, Installing, testing and commissioning sound proof acoustic enclosure diesel engine driven generating set, fully wired 415 volts, +/- 1.5%, 3 phase 4 wire 50 HZ, +/- 0.5% 0.80 PF of capacity 30 KVA, 24 KW having continous rating at 1500 RPM (Rated output 24KW Prime continious rating), brushless self excited, engine turbo charged water cooled complete under NTP condition with provision for 10% overload for 1hr on 12hr running and common base plate frame engine standard instrumental panel, self exciting and self regulating control panel with accessories, switch gear for automatic starting on main failure, control panel self starter 12 volts with battery 100 AH , 12 volts -01 Nos system with battery charging unit SCR type and battery cable leads , exhaust pipe with cladding by asbestos rope, sound proof canopy as per CPCB norms IV etc. Diesel engine set as per IS 10001 and alternator as per IS -13364 with inbuilt electronic speed governer with micro processor ,floor mounted fuel tank not less than 12 hours running capacity including necessary anti vibration pads including standard control panel and AMF panel (Auto Main Failure panel) as recommended by the manufacturer . Make of Engine - Kirlosker/Cumins/ Crompton Greaves/ Ashok Leyland.

Item No 53.00 contd... (a) (i) Fly wheel to suit coupling (ii) Flexible coupling with guard, bolts and nuts,etc.for exhaust system (iii) Dry type air cleaner filters (iv) Radiator with guard and radiator fan (v) Fuel pump complete with fuel injection systems (vi) Electronic speed governor (vii) Fuel filter (viii) Lub oil filter (ix) Self starter 12 Volts DC (x) Exhaust silencer industrial type (xi) Instrumental panel with the following:- (xii) Self starting key and switch (xiii) Lubricating oil pressure guage (xiv) Battery charging ammeter (xv) Hour meter and RPM indicator (xvi) Lub oil temp guage (xvii) Water temp guage (xviii) Lub oil pump (xix) Lub oil cooler assembly (xx) Alternator 12 V for charging of battery (xxi) One hand rotary type fuel pump connected with heavy duty pipe upto the tank (xxiii) Provison of light inside the canopy. (xxiv) Emergency stop push button outside of the container/ Canopy.

Item No 53.00 contd... (b) Alternator:- It shall be self excited self generated balanced 415 volts, 3 phase, 50 Cycles per second, 30 KVA at 0.8 PF or nearest in higher capacity, 1500 RPM, star connected, 4 wire, drip proof enclosure, air cool with radial fan mounted on rotor, screen protected, self ventilated enclosure as per IS 4722/IS 2613 & IEC 34.10 with drip proof enclosure with damper winding on pole faces, static automatic voltage regulator to provide voltage regulation +/-1% and harmonic factor better than 2% from no load to full load from 0.8 to unity power factor, efficiency 92% at 100% load/0.8PF, voltage drop at full load ≤ 20% and insulation of H class and above as per standard practice of OEM Make of Alternator - Kirlosker/ Cumins/ Crompton Greaves/ Ashok Leyland/ Bharat Bijlee. (c) Starting batteries 12 V, 55 AH maintenance free with suitable size of cable including fitting and terminals on angle iron frame(self starter sytem with 12 volt DC) - 01 No Make Exide/ Amaron/Nicco/ Amco. (d) Fuel tank: Made of min 1.6 mm thick CRCA sheet and having continous running of 12 hours at full load with level indicator to indicate the oil level of diesel tank, fuel strainer air vent inlet and out let connections with MS pipe of suitable size complete all as specified and as directed. (e) Sheet steel components pre-treated with zinc phosphate prior to polyster powder coating (f) Zinc plated or stainless steel fasteners (g) EPDM quality gasket (xxiii) Radiator filling access facility from out side

Item No 53.00 contd... (h) Engine and alternator shall be mounted through AVM Pads on common channel iron base frame. (j) Noise level, less than 75 db (A) at 1 mtr distance controlled by providing specially designed alternator to controlled the sound at air entry and exit of the enclosure.(The make of Acoustic enclosure shall be OEM of DG Set) (Foundation: Cost of PCC foundation as per manufacturer's instructions shall be deemed to be included in the Quoted rate)

Supply and fix Voltage stabilizer for automatic operation, three phase, naturally oil cooled, indoor type & designed for input variation between 340 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 30 KVA all as specfied and directed by Engr-in-Charge.

M & L for earthing complete with galvanized steel earth plate 60cm x 60cm x 6mm thick electrode, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI strip 25 x 4mm size up to test point by means of nuts, bolts, check nuts and washers of GI including excavation and earth work, PCC (1:3:6) type C-1 pit, 20mm bore dia GI pipe, medium grade pipe for watering arrangement and 40 mm bore dia GI pipe, light grade for protection of earth strip, 50mm thick RCC nominal mix (1:2:4) type B-1 cover reinforced with 8mm dia TMT bars @ 15cm C/C both ways and with handle made out of 10mm dia bars, funnel, wire mesh etc. as shown in electrical Plate No. 03 of SSR Part-I connected to earthing test point including taking down old unserviceable material and testing on completion etc complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than 1.5m below ground level connected to and including GI earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.