Bridge And Roof Company India Limited Tender

View complete overview of Nagaland Bridge And Roof Company India Limited Tender

Bridge And Roof Company India Limited Tender

Works

Building Construction

Eprocure

Kohima, Nagaland

Opening Date7 Jan 2025

Closing Soon28 Jan 2025

Tender Amount₹ 18,49,84,644

Email

Download

Costs

EMD
₹ 28,50,000
Document Cost
₹ 43,660
Tender Fee
Refer Documents

Summary

Construction Of 36 No Type Iii Quarters (g Plus Ii) In 06 Block With Allied Services And Development Works

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2025_BandR_843162_1
Tender No
B AND R/GO/51256/AR /NIT/CIVIL/P-05/01
Tender Authority
Bridge And Roof Company India Limited View
Purchaser Address
-
Website
http://eprocure.gov.in

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Tender Notice-23.0 MBeNIT-Const-36-Type...eNIT-Const-36-TypeIII-Pkg-05-Kohima.pdf

eNIT-Const-36-TypeIII-Pkg-05-Kohima.pdf

Tender Notice-11.4 MBTendernotice_1.pdf

eNotice-NIT-Const-36-TypeIII-Pkg-05-Kohima.pdf

BOQ-1800.3 kBBOQ_886319.xls

BOQ-Package05

Corrigendum-1757.7 kBCorrigendum-1-Date...Corrigendum-1-Dated-21.01.2025-P5.pdf

Document-12905.8 kB36 NOS TYPE- III ...36 NOS TYPE- III QUARTER 06 NOS BLOCK (G+II) FOR HQ IGAR(N) AT KOHIMA NAGALAND SAN 01.pdf

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm. Deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m

Quantity-

Rate-

Amount -

All kinds of soil

Quantity1080

Rate45

Amount 49561.2

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm. On plan) including disposal of excavated earth lead up to 50 m and lift upto 1.5 mtr disposed earth to be levelled and neatly dressed.

Quantity-

Rate-

Amount -

All kinds of soil

Quantity2310

Rate334

Amount 773595.9

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.

Quantity-

Rate-

Amount -

Ordinary rock

Quantity4920.24

Rate673

Amount 3311911.95

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.

Quantity-

Rate-

Amount -

All kinds of soil

Quantity923.04

Rate170

Amount 157230.63

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 and for all lift.

Quantity1037.43

Rate413

Amount 429444.15

Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.

Quantity771.67

Rate3522

Amount 2718469.94

Supplying chemical emulsion in sealed containers including delivery as specified

Quantity-

Rate-

Amount -

Chlorpyriphos / Lindane emulsifiable concentrate of 20%

Quantity32.56

Rate327

Amount 10662.42

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :

Quantity-

Rate-

Amount -

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Quantity433.8

Rate72

Amount 31606.67

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity1045.8

Rate417

Amount 436652.87

CONCRETE WORK

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.

Quantity-

Rate-

Amount -

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)

Quantity186.87

Rate11780

Amount 2201367.84

1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources )

Quantity44.88

Rate10872

Amount 487969.92

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Quantity256.67

Rate737

Amount 189214.56

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.

Quantity90

Rate93

Amount 8384.4

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Quantity256.67

Rate185

Amount 47632.82

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed by dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,leveiling & dressing & finishing the top smooth.

Quantity434.1

Rate1111

Amount 482337.19

REINFORCED CEMENT CONCRETE WORK

Quantity-

Rate-

Amount -

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work using coarse aggregate & fine aggregate derived from natural sources, portland pozzolana/ordinary portland/portland slag cement, admixtures in recomended proportions as per IS:9103 to accelerate/retard setting of concrete, to improve durability & workability without impairing strength , including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering, finishing & reinforcement as per direction of the engineer-in-charge, for the following grades of concrete : Note : Extra cement upto 10% of the minimum specified cement content in design mix shall be payble seperately. In case the cement content in design mix is more than 110% of the specified minimum cement content,the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

Quantity-

Rate-

Amount -

All works upto plinth level: Concrete of M25 grade with minimum cement content of 330kg/cum

Quantity495.79

Rate13035

Amount 6463073.82

All works above plinth level upto floor V level: Concrete of M25 grade with minimum cement content of 330kg/cum

Quantity1597.42

Rate16431

Amount 26247271.92

Add for using extra cement in the items of design mix over and above the specified cement content therein.

Quantity41.96

Rate1122

Amount 47087.51

Centering and shuttering including strutting propping etc. and removal of form work for :

Quantity-

Rate-

Amount -

Foundations, footings, bases of columns etc. for mass concrete.

Quantity569.76

Rate501

Amount 286002.43

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Quantity1208.09

Rate1091

Amount 1318497.35

Suspended floors, roofs, landings, balconies and access platform.

Quantity4199.73

Rate1249

Amount 5247604.63

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Quantity3793.98

Rate991

Amount 3762224.39

Columns, pillars, piers, abutments, posts and struts.

Quantity2501.52

Rate1310

Amount 3279392.66

Stairs (excluding landings) except spiral staircases.

Quantity138.96

Rate1072

Amount 148987.35

Weather shade, Chajjas, corbels etc., including edges

Quantity317.12

Rate1328

Amount 421262.21

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Quantity-

Rate-

Amount -

Thermo-Mechanically treated bars of grade Fe-500D or more

Quantity54450.94

Rate146

Amount 7956915.86

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Quantity-

Rate-

Amount -

Thermo-Mechanically treated bars of grade Fe-500D or more

Quantity182471.3

Rate146

Amount 26664531.07

BRICK WORK

Quantity-

Rate-

Amount -

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Quantity-

Rate-

Amount -

Cement Mortar 1:4 (1 cement : 4 coarse sand).

Quantity177.42

Rate11217

Amount 1990285.14

Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

Quantity789.07

Rate11400

Amount 8995981.91

Providing and laying autoclaved aerated cement blocks masonry with 100 / 115mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

Quantity170.75

Rate14491

Amount 2474346.79

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Quantity519.12

Rate105

Amount 54746.4

WOOD WORK

Quantity-

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood

Quantity4.35

Rate120948

Amount 526125.54

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood: 35 mm thick shutters

Quantity207.9

Rate4094

Amount 851263.18

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

Quantity-

Rate-

Amount -

Kiln seasoned and chemically treated hollock wood

Quantity207.9

Rate3324

Amount 691257.11

Providing and fixing ISI marked flush door shutters conforming to IS 2202 (part I) decorativie type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters

Quantity-

Rate-

Amount -

35 mm thick including ISI marked stainless steel butt hinges with necessary screws

Quantity204.12

Rate5030

Amount 1026817.5

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Quantity204.12

Rate654

Amount 133555.72

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (Twin rubber stopper)

Quantity216

Rate105

Amount 22727.52

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.

Quantity-

Rate-

Amount -

250 x 16 mm

Quantity180

Rate382

Amount 68922

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Quantity-

Rate-

Amount -

200 x 10 mm

Quantity216

Rate148

Amount 31970.16

150 x 10 mm

Quantity216

Rate123

Amount 26600.4

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Quantity-

Rate-

Amount -

100 mm

Quantity216

Rate86

Amount 18748.8

Providing and fixing wire gauge shutters using galvanized MS wire gauge of average width and aperture 1.4 mm in both direction with wire of 0.63mm, for door windows and clerestory windows with hinges and necessary screws : 35mm thich shutter -Kiln seasoned and chemically treated hollock wood

Quantity72

Rate5118

Amount 368537.04

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.

Quantity237.6

Rate753

Amount 179029.22

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as anel, all complete as per manufacturer's specification and direction of Engineer in-charge.

Quantity-

Rate-

Amount -

Non decorative finish (matt finish)

Quantity189

Rate5651

Amount 1068165.63

Providing and fixing fly roof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3mm and nuts & bolts complete.

Quantity-

Rate-

Amount -

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.

Quantity406.51

Rate1583

Amount 643773.63

STEEL WORK

Quantity-

Rate-

Amount -

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer.

Quantity-

Rate-

Amount -

Using M.S. angels 40x40x6 mm for diagonal braces

Quantity11.34

Rate7793

Amount 88377.84

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

Fixed to openings /wooden frames with rawl plugs screws etc.

Quantity4605.12

Rate322

Amount 1484045.97

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Quantity-

Rate-

Amount -

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Quantity1791.72

Rate231

Amount 415589.45

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

Quantity-

Rate-

Amount -

M.S. tube

Quantity1296

Rate256

Amount 331983.36

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Quantity300

Rate127

Amount 38241

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Quantity25.2

Rate15318

Amount 386014.86

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Quantity180

Rate301

Amount 54338.4

ALUMINIUM WORK

Quantity-

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Quantity-

Rate-

Amount -

For fixed portion: Powder coated aluminium (minimum thickness of powder coating 50 micron)

Quantity2032.56

Rate760

Amount 1544928.53

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron)

Quantity2032.56

Rate920

Amount 1871276.36

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.

Quantity-

Rate-

Amount -

With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Quantity418.51

Rate1662

Amount 695693.36

Extra for providing frosted glass panes 4 mm thick(weight not less than 10kg/sqm) instead of ordinary float glass panes 4 mm thick(weight not less than 10kg/sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

Quantity42

Rate242

Amount 10166.52

Filling the gap in between aluminium / stone / wood frame and adjacent rcc / Brick / Stone / Wood / Ceramic / Gypsum work by providing weather / structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600

Quantity-

Rate-

Amount -

Upto 5 mm depth and 5 mm width

Quantity360

Rate212

Amount 76402.8

Upto 10 mm depth and 10 mm width

Quantity252

Rate288

Amount 72707.04

PLASTERING & POINTING WORK

Quantity-

Rate-

Amount -

Cement Plaster (In Coarse Sand)

Quantity-

Rate-

Amount -

12 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)

Quantity3282.26

Rate479

Amount 1574828.35

15mm plaster on rough side of single brick work: 1:6 (1 cement : 6 coarse sand)

Quantity4923.39

Rate552

Amount 2721403.82

20 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)

Quantity7553.97

Rate654

Amount 4941278.4

6 mm cement plaster of mix: 1:3 (1 cement : 3 fine sand)

Quantity2339.35

Rate412

Amount 964935.09

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Quantity426

Rate98

Amount 42046.2

Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per 50 Kg of directions of Engineer-in-Charge.

Quantity426

Rate111

Amount 47601.24

Neat cement punning

Quantity422.53

Rate3

Amount 1516.88

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity10017.74

Rate201

Amount 2022381.35

Finishing walls with Acrylic Smooth exterior paint of required shade :

Quantity-

Rate-

Amount -

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Quantity7951.54

Rate271

Amount 2162580.33

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

Quantity-

Rate-

Amount -

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Quantity668.41

Rate311

Amount 208537.24

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Quantity-

Rate-

Amount -

Two coats

Quantity10544.99

Rate198

Amount 2089278.87

Applying priming coat :

Quantity-

Rate-

Amount -

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Quantity460.51

Rate90

Amount 41662.34

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

Quantity-

Rate-

Amount -

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Quantity207.9

Rate100

Amount 20825.34

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity10544.99

Rate105

Amount 1107856.65

FLOORING WORK

Quantity-

Rate-

Amount -

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Quantity-

Rate-

Amount -

Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm

Quantity2951.41

Rate2097

Amount 6189726.57

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity281.84

Rate2390

Amount 673724.43

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Quantity-

Rate-

Amount -

25 mm thick

Quantity84.08

Rate2781

Amount 233895.43

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Quantity283.14

Rate3322

Amount 940851.57

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Quantity381.89

Rate1525

Amount 582405.16

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Quantity1394.39

Rate1529

Amount 2133123.88

WATER PROOFING TREATEMENT WORK

Quantity-

Rate-

Amount -

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Quantity-

Rate-

Amount -

110 mm diameter

Quantity399.6

Rate521

Amount 208271.52

Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Quantity-

Rate-

Amount -

Coupler: 110 mm

Quantity24

Rate195

Amount 4692.48

Single tee without door: 110x110x110 mm

Quantity48

Rate310

Amount 14924.64

Bend 87.5°: 110 mm bend

Quantity48

Rate215

Amount 10328.16

Shoe (Plain): 110 mm

Quantity48

Rate189

Amount 9072

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs screwed with MS screws of required length including cuting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete

Quantity-

Rate-

Amount -

110 mm

Quantity450

Rate504

Amount 227025

Providing and fixing to the inlet mouth of rain water pipes cast iron grating 15 cm diametre and weighing not less than 440 grams.

Quantity48

Rate78

Amount 3747.84

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

Quantity-

Rate-

Amount -

In 75x75 mm deep chase

Quantity501.24

Rate424

Amount 212595.93

Making khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete.

Quantity48

Rate434

Amount 20859.36

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge

Quantity-

Rate-

Amount -

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Quantity144

Rate3176

Amount 457467.84

Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixedwith 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).

Quantity1116

Rate1002

Amount 1118756.52

Grading roof for water proofing treatment with

Quantity-

Rate-

Amount -

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Quantity69.93

Rate12242

Amount 856139.7

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.

Quantity-

Rate-

Amount -

For horizontal surface one coat @1.10 kg per sqm.

Quantity192

Rate507

Amount 97489.92

AREA DEVELOPMENT, TERRACE FORMATION, RETAINING WALLS, ROAD WORK

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm. On plan) including disposal of excavated earth lead up to 50 m and lift upto 1.5 mtr disposed earth to be levelled and neatly dressed.

Quantity-

Rate-

Amount -

All kinds of soil

Quantity4200.35

Rate334

Amount 1406655.21

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 and for all lift.

Quantity2100.18

Rate413

Amount 869369.51

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with :

Quantity-

Rate-

Amount -

7.6.1 Cement mortar 1:6 (1 cement : 6 coarse sand)

Quantity857.25

Rate12900

Amount 11059330.82

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.

Quantity-

Rate-

Amount -

1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources )

Quantity37.97

Rate10872

Amount 412839.08

1:4:8 (1 Cement : 4 coarse sand : (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Quantity42.19

Rate10311

Amount 435051.04

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Quantity350

Rate294

Amount 102977

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

Quantity-

Rate-

Amount -

60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

Quantity100

Rate1648

Amount 164830

80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Quantity350

Rate2648

Amount 926800

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Quantity9.6

Rate14040

Amount 134788.03

DSR-SANITARY, WATER SUPPLY AND DRAINAGE WORKS

Quantity-

Rate-

Amount -

SUBHEAD NO. 1 : SANITARY INSTALLATIONS

Quantity-

Rate-

Amount -

Providing and fixing white vitreous china pedestal type water closet (european Type W.C. pan) with seat and lid, 10 litre low level pvc flushing cistern,including flush pipe,with manualy controlled device within brackets handle lever,conforming to IS:7231,with all fittings & fixtures complete, including cutting and making good the walls & floors wherever required.

Quantity-

Rate-

Amount -

W.C. pan with ISI marked white solid plastic seat and lid

Quantity72

Rate9031

Amount 650254.32

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass piller taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :

Quantity-

Rate-

Amount -

White vitreous China Wash basin size 630X450mm with a single 15 mm C.P. brass pillar tap

Quantity36

Rate4834

Amount 174025.44

White vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass piller taps

Quantity36

Rate4452

Amount 160285.32

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Quantity-

Rate-

Amount -

Kitchen sink with drain board:510x1040 mm bowl depth 200 mm

Quantity36

Rate10230

Amount 368284.32

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Quantity-

Rate-

Amount -

Semi rigid pipe: 32 mm dia

Quantity108

Rate148

Amount 16011

Providing and fixing soil, waste and vent pipes

Quantity-

Rate-

Amount -

100 mm dia: Sand cast iron S&S pipe as per IS: 1729

Quantity720

Rate1659

Amount 1194811.2

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :

Quantity-

Rate-

Amount -

100mm

Quantity180

Rate266

Amount 47957.4

Providing and fixing M.S. holder-bat clamps of approved design to Sand cast iron (spun) pipe embedded in and including cement concrete blocks 10X10X10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of cutting holes and making good the walls etc.

Quantity-

Rate-

Amount -

For 100 mm dia Pipe

Quantity180

Rate502

Amount 90502.2

Providing and fixing bend of required degree with access door, insersion rubber washer 3mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100 mm: Sand cast iron S & S as per IS - 1729

Quantity60

Rate865

Amount 51903.6

Providing and fixing plain bend of required degree

Quantity-

Rate-

Amount -

100 mm: Sand cast iron S & S as per IS - 1729

Quantity30

Rate673

Amount 20193.6

Providing and fixing heel rest sanitary bend

Quantity-

Rate-

Amount -

100 mm: Sand cast iron S & S as per IS - 1729

Quantity60

Rate836

Amount 50202

Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete:

Quantity-

Rate-

Amount -

100X100X100X100 mm: Sand cast iron S & S as per IS - 1729

Quantity36

Rate1693

Amount 60955.2

Providing and fixing single equal plain junction of required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100X100X100 mm: Sand cast iron S & S as per IS - 1729

Quantity36

Rate1094

Amount 39386.88

Providing and fixing single equal plain junction of required degree

Quantity-

Rate-

Amount -

100X100X100 mm: Sand cast iron S & S as per IS - 1729

Quantity36

Rate945

Amount 34047

Providing and fixing double unequal of junction required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Quantity-

Rate-

Amount -

100X100X75X75 mm: Sand cast iron S & S as per IS - 1729

Quantity12

Rate1682

Amount 20195.16

Providing and fixing sand cast iron S & S off sets as per IS : 1729.

Quantity-

Rate-

Amount -

152 mm off sets: With100 mm dia pipe

Quantity12

Rate1086

Amount 13034.16

Providing and fixing terminal guard:

Quantity-

Rate-

Amount -

100 mm: Sand cast iron S & S as per IS - 1729

Quantity60

Rate640

Amount 38426.4

Providing and fixing collar :

Quantity-

Rate-

Amount -

100 mm: Sand cast iron S & S as per IS - 1729

Quantity60

Rate651

Amount 39081.6

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:

Quantity-

Rate-

Amount -

100 mm inlet and 100 mm outlet: Sand cast iron S & S as per IS - 1729

Quantity108

Rate2287

Amount 247069.44

Painting sand cast iron / centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate, grey of buff etc. over a coat of primer (of approved quality) for new work.

Quantity-

Rate-

Amount -

100 mm diameter pipe

Quantity720

Rate113

Amount 81626.4

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Quantity108

Rate333

Amount 36036.36

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed fitting arrangement of approved quality colour.

Quantity-

Rate-

Amount -

600 mm long towel rail with total length of 645 mm width 78 mm and effective height of 88 mm, weighing not less than 190 gms

Quantity72

Rate978

Amount 70458.48

Providing and fixing PTMT soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105 gms.

Quantity72

Rate238

Amount 17169.84

Providing and fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete .

Quantity72

Rate2300

Amount 165616.56

Providing and fixing 600X120X5 mm glass shelf with edges round of supported on anodised aluminium angle frame with CP brass brackets and guardrail complete fixed with 40 mm long screws, rawl plugs etc. complete

Quantity72

Rate1535

Amount 110573.28

SUBHEAD NO. 2 : WATER SUPPLY

Quantity-

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal Work: Exposed on wall)

Quantity-

Rate-

Amount -

15mm dia nominal bore

Quantity30

Rate417

Amount 12513.9

20mm dia nominal bore

Quantity288

Rate529

Amount 152619.84

25mm dia nominal bore

Quantity60

Rate665

Amount 39957

32 mm dia. Nominal bore

Quantity72

Rate816

Amount 58793.04

40 mm dia. Nominal bore

Quantity72

Rate1099

Amount 79143.84

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

15mm dia nominal bore

Quantity324

Rate723

Amount 234569.52

20mm dia nominal bore

Quantity216

Rate837

Amount 180884.88

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

Quantity-

Rate-

Amount -

External Work: 40 mm dia. Nominal bore

Quantity360

Rate911

Amount 328147.2

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

Quantity-

Rate-

Amount -

25mm nominal bore

Quantity12

Rate867

Amount 10413

32 mm nominal bore

Quantity12

Rate961

Amount 11538.72

40 mm nominal bore

Quantity12

Rate1152

Amount 13835.16

Providing and fixing brass stop cock of approved quality

Quantity-

Rate-

Amount -

20mm nominal bore

Quantity108

Rate534

Amount 57733.56

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

Quantity-

Rate-

Amount -

25 mm nominal bore

Quantity12

Rate650

Amount 7807.56

Providing and fixing gun metal non-return valve of approved quality (screwed end):

Quantity-

Rate-

Amount -

40mm nominal bore: Vertical

Quantity6

Rate1710

Amount 10261.32

Providing and fixing CP Brass shower rose with 15 or 20mm inlet:

Quantity-

Rate-

Amount -

100mm dia.

Quantity72

Rate271

Amount 19523.52

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reiforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

Quantity-

Rate-

Amount -

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Quantity12

Rate2790

Amount 33490.44

Providing and placing on terrace (at all floor levels) polythene water storage tank ISI:12701marked with cover and suitable locking arrangement and making necessary hole for inlet, outlet and overflow pipe but without fittings and the support for tank

Quantity15000

Rate15

Amount 237150

Providing and fixing PTMT, push cock of approved quality and colour.

Quantity-

Rate-

Amount -

15 mm nominal bore, 98 mm long, weighing not less than 75 gms

Quantity36

Rate157

Amount 5659.92

Providing and fixing PTMT grating of approved quality and colour. : Circular type

Quantity-

Rate-

Amount -

100 mm nominal dia

Quantity72

Rate54

Amount 3896.64

125 mm nominal dia with 25 mm waste hole

Quantity108

Rate73

Amount 7966.08

Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931.

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity108

Rate707

Amount 76438.08

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity36

Rate1149

Amount 41373.36

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity72

Rate969

Amount 69801.84

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Quantity-

Rate-

Amount -

15mm nominal bore

Quantity180

Rate815

Amount 146806.2

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete

Quantity-

Rate-

Amount -

150 mm diameter

Quantity480

Rate964

Amount 462724.8

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:

Quantity-

Rate-

Amount -

150 mm diameter S. W. pipe

Quantity12

Rate1785

Amount 21421.68

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design:

Quantity-

Rate-

Amount -

150 mm diameter S. W. pipe

Quantity468

Rate1124

Amount 526181.76

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality

Quantity-

Rate-

Amount -

L D- 2.5, Rectangular shape 600x450 mm internal dimensions

Quantity18

Rate2046

Amount 36829.98

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kind of soil

Quantity-

Rate-

Amount -

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Quantity480

Rate680

Amount 326544

Providing and fixing square-mouth S.W gully trap class SP-1 complete with C.I. grating brick masonary chamber with water tight C.I. cover with frame of 300X300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Quantity-

Rate-

Amount -

180 X 150 mm size P type: With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity12

Rate4130

Amount 49566.24

Constructing brick masonary manhole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand(zone-III):3 graded stone aggregate 20 mm nominal size) fondation concrete 1:4:8 mix (1 cement: 4 coarse sand:(zone-III) 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregated 20 mm nominal size) finished with a floating coat of a neat cement complete as per standard design.

Quantity-

Rate-

Amount -

Inside size 90x80 cm and 45 cm deep including C.I.cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg.): With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity64

Rate19050

Amount 1219227.52

Extra for depth for manholes-Size 90 X 80 cm

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non modular) bricks with class designation 7.5

Quantity12

Rate13248

Amount 158976.72

Making soak pit 2.5 m diameter 3.0 metre deep with 45X45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 long complete as per standard design

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5

Quantity6

Rate45688

Amount 274131.6

DSR-INTERNAL AND EXTERNAL ELECTRICAL WORKS

Quantity-

Rate-

Amount -

WIRING: WIRING IN PVC CONDUIT

Quantity-

Rate-

Amount -

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Quantity-

Rate-

Amount -

Group A

Quantity804

Rate1654

Amount 1330209.96

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

Quantity-

Rate-

Amount -

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Quantity2790

Rate379

Amount 1059642

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Quantity2700

Rate448

Amount 1210302

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Quantity60

Rate544

Amount 32665.8

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Quantity360

Rate715

Amount 257612.4

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Quantity-

Rate-

Amount -

5/6 amps switch

Quantity180

Rate167

Amount 30220.2

3 pin 5/6 amp socket outlet

Quantity180

Rate198

Amount 35794.8

Supplying & fixing call bell/ buzzer suitable for single phase,230 volts, complete as required.

Quantity36

Rate161

Amount 5809.32

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Quantity144

Rate601

Amount 86613.12

Supplying and fixing modular blanking plate on the exixting modular plate and switch box excluding modular plate as reqd.

Quantity360

Rate65

Amount 23472

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Quantity468

Rate777

Amount 363884.04

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Quantity180

Rate955

Amount 171936

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Quantity-

Rate-

Amount -

Upto 450 mm sweep

Quantity108

Rate733

Amount 79220.16

MCCB, MCB & DB’S

Quantity-

Rate-

Amount -

Supplying and fixing following way,single pole and neutral,sheet steel MCB distribution board, 240 volts on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)

Quantity-

Rate-

Amount -

12 way, Double door

Quantity36

Rate3773

Amount 135847.44

Supplying and fixing following way,horizontal type three pole and neutral,sheet steel MCB distribution board, 415 volts on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)

Quantity-

Rate-

Amount -

4 way (4 + 12), Double door

Quantity6

Rate6668

Amount 40010.94

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,10 Ka, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

Single pole

Quantity432

Rate417

Amount 180269.28

Double pole

Quantity36

Rate1069

Amount 38495.16

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

63 amps

Quantity6

Rate1685

Amount 10112.76

Providing and fixing M.V. danger notice plate of 200 mm X 150mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Quantity6

Rate438

Amount 2630.88

EARTHING

Quantity-

Rate-

Amount -

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Quantity24

Rate12179

Amount 292311.6

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Quantity60

Rate83

Amount 4987.8

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Quantity240

Rate1584

Amount 380256

LIGHTNING CONDUCTOR

Quantity-

Rate-

Amount -

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, GI tube, having single prong at top, with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required.

Quantity24

Rate844

Amount 20264.64

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

Quantity480

Rate205

Amount 98582.4

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

Quantity180

Rate321

Amount 57801.6

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Quantity12

Rate197

Amount 2366.76

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Quantity-

Rate-

Amount -

Above 6.5 metre and upto 8.0 metre

Quantity12

Rate9887

Amount 118653.84

MV CABLE LAYING

Quantity-

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Quantity-

Rate-

Amount -

Upto 35 sq. mm

Quantity600

Rate630

Amount 378498

MV CABLE JOINTING & END TERMINATION

Quantity-

Rate-

Amount -

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Quantity-

Rate-

Amount -

2 X 6 sq. mm (19mm)

Quantity24

Rate391

Amount 9389.04

4 X 25 sq. mm (25mm)

Quantity12

Rate513

Amount 6161.52

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Quantity396

Rate335

Amount 132972.84

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Quantity6

Rate767

Amount 4606.5

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Quantity144

Rate347

Amount 49996.8

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Quantity108

Rate337

Amount 36441.36

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required

Quantity-

Rate-

Amount -

100 mm dia

Quantity30

Rate2943

Amount 88315.5

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.

Quantity-

Rate-

Amount -

100 mm dia

Quantity30

Rate1079

Amount 32372.7

150 mm dia

Quantity30

Rate1180

Amount 35404.5

NON DSR:INTERNAL AND EXTERNAL ELECTRICAL WORKS

Quantity-

Rate-

Amount -

P/I metering arrangement in MS enclosure matching with the vetical /Horizotal TPDB to be fixed at the top of the DB i/c matching color as per following:0-500v, analog voltmeter with VSS control fuse-1set

Quantity-

Rate-

Amount -

LED indicating lamp-3nos MAKE: AE/L&T

Quantity6

Rate4667

Amount 28002

Supplying , transportation & delivery at sight of 7M long MS steel tubular pole type 410 SP-3, with one coat of MS primer paint, and as per IS: 2713-1986 including MS bracket at the top about 0.7m long projection single arm arch bracket with 40m dia MS nipple for holding light fittings, , base plate, cap, earthing stud etc. with supply and fixing of weather proof 16 SWG thick G.I. Loop- box at the pole base weather proof type of 200 X 150X100 mm size having front with locking arrangement and with 4 pole terminal supported on insulators, 1 No. 15A kitkat fuse, earthing stud , duly connected, 2 Nos. 32mm bore polythene pipe embedded in concrete for cable entry & outgoing etc. as required. (The concrete foundation size : Under ground 400 x 400 x 1150 (depth) with above ground pedestral of 300 x 300 x 450, where loop boox to be accomodated. Erection of pole to be paid separetly.) Make : SUBHAM POLES or Equiv.

Quantity12

Rate16556

Amount 198672

Providing & installing pole wiring with 3 x 1.5 sq.mm PVC copper wire including earthing the pole and connecting to Loop in and Loop out box to installed at the base of the pole with connection and installed the M.S. box in cement concrete foundation. The pole shall be painted with 2 coats of aluminium paint over single coat of MS primer paint as per direction of E/I.

Quantity12

Rate3580

Amount 42960

Supply and installation of street light fitting including 45W LED, Smart Bright Essential and 40mm dia MS pipe of suitable length with clamping, wiring, connection as reqd. Philips cat no. BRP031 LED45 CW SLR GR PSU SPD OR EQIV.

Quantity12

Rate5350

Amount 64200

Supply & installation of GI earth spike of about 20mm dia X 1800 mm long in ground near each street pole including supply & installation of 8 SWG GI wire from earth spike to earthing bolt of street pole through 3/4" PVC pipe installed in Pole foundation, connection as required.

Quantity12

Rate890

Amount 10680

Supply of Alluminium conductor, PVC/XLPE insulated, armoured, overall PVC sheathed 1100 Volts Grade Power Cables Confirming to IS 1554 / 7098 ( Part - I ) 1988 with latest amendments of following sizes :

Quantity-

Rate-

Amount -

2 X 6 sq. mm

Quantity300

Rate234

Amount 70200

4 X 25 sq. mm

Quantity300

Rate536

Amount 160800

Supply , transportation and delivery at site single Indoor 20W LED Tube light Batten type Fitting complete. Model - Essential SmartBright Batten, Equivalent to Philips cat no. BN170C LED20S-6500 PSU L120. or Equivalent.

Quantity396

Rate1062

Amount 420552

Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model - Sleek Surface Pro similar to Philips Cat No - SM296C LED20S-6500 PSU WH or Equivalent.

Quantity72

Rate2456

Amount 176832

Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model - Sleek Surface similar to Philips Cat No - SM251/261 LED20S 6500 PSU WH or Equivalent.

Quantity72

Rate2022

Amount 145584

Supply & Fixing of street light fitting including 25W LED, Smart Bright Essential, Philips BRP029 LED25 CW SLR GR PSU SPD OR EQIV..

Quantity60

Rate2456

Amount 147360

Supply , transportation and delivery at site following size of Ceiling/ Exhaust/wall bracket/PadestalFan of following description as reqd.(Usha/Bajaj/Khaitan/EPC or eqv.

Quantity-

Rate-

Amount -

1200mm(48") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.

Quantity108

Rate3670

Amount 396360

1400mm(56") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.

Quantity36

Rate3670

Amount 132120

Metal exhaust light duty 230mm(9") Aeroclean LD GBD AC exhaust fan.

Quantity108

Rate3880

Amount 419040

Supply of Al Louver for 230 mm exhaust fan

Quantity108

Rate200

Amount 21600

Fixing only outdoor street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Quantity60

Rate1500

Amount 90000

"NOTE:- THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC INCLUDING GST."

Quantity-

Rate-

Amount -

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.