Military Engineer Services Tender

M & L for brick work with sub-class 'B' bricks of size one brick thick honey comb walls built in cement mortar 1:6 complete all as specified and directed.

150 mm bore

S&F FRP solution preparetion tank with lid, port hole, inlet / outlet / drain connection, level gauge etc and fitted with speed reducing motor & SS-316 agitator combined with dosing tank with lid, port hole, inlet / outlet / drain connection, level gauge & dosing motors (equiv RC 11) . etc. Preparetion tank - 170 ltrs, Dosing tank - 100 ltrs complete all as specified and directed.

Taking up or down steel tubing and connections alongwith other fittings including cleaning for refixing or removal complete all as specified and directed :-

Supply, install, connecting and testing cast iron non return (reflux) valve in repairs suitable for 150 mm dia pipe, heavy duty, flanged ends with gun metal seat, class PN 1.6, IS - 5312 marked including all jointing materials such as leather gasket, bolts nuts washers etc complete all as specified and directed.

Demolition of existing unserviceable valve pit and Construction of brick masonary valve pit chamber 900x900x900mm (internal dimension) with bricks, old size, built in CM 1:4, PCC 1:4:8, type D-2 as in foundation concrete bed/ floor, coping and 10mm thick rendering in CM 1:4 on internal and exposed external surfaces, external plaster shall be upto 15 cm below ground level and mixed with water proofing compound @ 3% by weight of cement with and including MS cover 03 mm thick MS sheet welded with 40x40x6 mm size angle iron frame fixed to top of valve pit by means of hold fast 150mm long, embedded in PCC 1:2:4 type B1, with locking arrangements including excavation and earth work in soft/loose soil, painting sheet surfaces with two coats of anti corrsive paint over a coat of red oxide primer complete all as shown on drawings, specified and directed. Note : (i) Drg No AF/TD/240/15 Sheet 1/2 and 2/2. (ii) Valve pit shall be Type 'A' but size shall be as mentioned above.

Excavation in trenches in soft / loose soil, not exc 1.5 m wide and n. exc 1.5 m depth or n exc 10 Sqm on plan & getting out, for laying of pipes, foundations etc. and getting out including triming and forming bottom surface complete, all as directed.

S & F Galvanised steel tubing Heavy grade for protection of under ground cable on poles / walls/under road crossing/laid in trenches etc conforming to IS-1239 for following bore complete all as directed:-

M&L for pre-cast cement concrete block masonry 1:3:6 Type C-1 using 20mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and directed.

250 mm bore (Note : Excavation & earth work shall be measured & paid separately under respective items of this Schedule).

150mm bore.

150mm bore.

Supply,Fabrication,installation including testing & commissioning of LT motor/starter panel Indoor Type,IP-43,suitable dimension upto 1750X1200X350 MM,CPRI approved of suitable size made out of MS sheet 2mm thick and angle iron 40x40x6 mm factory made weather proof/vermin proof (double door) totally enclosed front and back openable padestal type with suitable locking arrangements and coating with polystrene/epoxy powder over a coat of zinc chromate and comprising of following items complete with rubber gland for proper closing of panels all as specified and directed by Engr-in-Charge. (a) Copper busbar suitable for three phase four wire system of current rating 600 Amps and insulated with proper colour coding -01set. (b) MCCB Four Pole of capacity 320-400 Amps with thermal release type with O/l and S/C protection and rupturing capacity 50 KA- 01 No (Incomer). (C) MCCB TP 415 volts current rating 160 amps and rupturing capacity 25 KA - 02 No (Out going).(d) Fully autromatic star delta starter push button type air break suitable for elctric motor 3 Phase 50 HZ 415 volts of capacity upto 110 HP with relay, single phase preventor complete without encloser - 02 Nos.(f) Digital volt meter of range 0-500 volts off size of 96 mm squre with selector switch -01 No.(g) Digital Ameter of range 0-500 Amps of size 96 sq mm square with suitable Ct,s coil and selector switch -01 No (01 Nos Incomer + 02 Nos Outgoing).(h) Indicator lamp LED type - Set of three.(j) Single phase preventor - 02 Nos(k) Motor protection relay -02 No. Note : Rate includes dismantling of surface and fixing of panels with required pcc,nuts and bolts etc.

M & L for rendering 15mm thick in CM 1:6 on fair faces of brick masonry surfaces or on concrete surfaces finished even and smooth without using extra cement complete all as directed.

100mm bore.

200 mm bore

M & L for ductile iron pipe fittings ISI marked like bends, tapers, tail pieces, tee, branch pieces (single/double) any type and angle/radius and straight connecting pieces complete all as specified and directed.

200 mm bore

Supply and fixing MS structural steel work in cross arms, bracings, supports, clamps and back plates fabricated (with drilled holes hot and cold etc) from channel/angle iron sections of various size and shape FI clamps (full, half 'D' and earth clamp etc) including necessary MS bolts, nuts, washer etc and painting with two coats of aluminium paint over one coat of red oxide primer complete all as directed.

Refixing of serviceable ductile iron tubing retrieved from Ser item No 02 here-in-before with provision of all new fittings in new or old alignment complete all as specified and as directed for the following bore of pipe:-

150mm bore.

Supply, install, connecting and testing of sluice valve, class PN- 1.6 double flanged with CI body, wheel and brass spindle and nuts etc, non rising type IS-14846-2000 marked including jointing materials i.e. rubber gaskets, nuts, bolts etc. complete all as specified and directed complete of following sizes:-

100mm bore.

Removing excavated materials to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point in soils complete all as directed.

Supply, laying, jointing and testing ductile iron pipe with socket and spigot ends class K9 of wall thickness not less than 6.0mm and working pressure 60kg/cm2 minimum complete all as specified and directed for following nominal diameter :-

150mm bore.

Taking up or down ductile iron tubing and connections alongwith other fittings including cleaning for refixing or removal complete all as specified and directed :-

Supply, install, testing and commissioning of Horizontal multistage pump suitable for pumping clear water, 1480 rpm, discharge capacity 68.18 Cubic Meter/hour at a head of 155 metre, number of stages 11 Nos, casing of pump CI FG 260 and impeller of CI FG 260 of rated diameter 270mm, shaft made out of Carbon Steel (wrought), IS-1570 (Part-II) Gr 40 C8, shaft sleeves made out of SS 410, type of packing : Mechnical seal packed, Base plate : MS fabricated, pump input (bkw)-51.36 kW, coupled with totally enclsoed fan cooled, squireel cage induction motor of 75 KW rating, 1480 rpm, 50 Hz effeciency Class IE-2, suitable for Star/Delta starting including motor starter compaitable for motor complete all as specified and directed. Model/Make (a) For Pump: Model No. RKB 100/23E of make Kirloskar Brothers Limited or equivalent model of makes listed in list of makes. (b) For Motor: KBL. Note : LT cable for connection of motor from panel,Foundation required PCC & fabricated structural steel sections like, channel, angle iron, clamps, back plates by welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed including nuts, bolts, washers and inclusive of one primer coat of red oxide zinc chrome, one under coat and one finishing coat of heat resistant synthetic enamel paint complete is inclusive of above all as specified and directed.

150 mm bore

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in soft / loose soil back in trenches after pipes have been laid and tested, complete all as directed.