Military Engineer Services Tender

NOTES :- (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) The cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. 15% amount of this item will be retained in FB for a period of 05 years from the certified date of completion. (h) Masking of windows / doors during spray painting using polythene film is inluded in the quoted rates. (j) Cleaning and clearing of site of painting, mats etc after completion of work is included in the quoted rate.

Material and labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied 0.90 litre 10 sqm complete all as specified and directed.

NOTES :- (a) Primer and emulsion application to be caned out through air less spray machine (Only mechanical application allowed except in paint application on bands/ chajja/ building edges/ borders/ projections where contrasting color as specified and directed is to be applied) (b)The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (c) The cost of scaffolding upto 10m height of building shall be included in the quoted rate. (d) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (e) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (f) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (g) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (h) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. 15% amount of this item will be retained in FB for a period of 05 years from the certified date of completion. (j) Masking of windows / doors during spray painting using polythene film is inluded in the quoted rates. (k) Cleaning and clearing of site of painting, mats etc after completion of work is included in the quoted rate.

Material and labour for one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted)/10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. (Make- Asian/Berge/Dulex) NOTES :- (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) The cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. 15% amount of this item will be retained in FB for a period of 05 years from the certified date of completion. (h) Masking of windows / doors during spray painting using polythene film is inluded in the quoted rates. (j) Cleaning and clearing of site of painting, mats etc after completion of work is included in the quoted rate.

Material and labour for two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algae properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. (Make- Asian/Berge/Dulex)

NOTES :- (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) The cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. 15% amount of this item will be retained in FB for a period of 05 years from the certified date of completion. (h) Masking of windows / doors during spray painting using polythene film is inluded in the quoted rates. (j) Cleaning and clearing of site of painting, mats etc after completion of work is included in the quoted rate.

Material and labour for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application).

NOTES :- (a) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application). (b)The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (c) The cost of scaffolding upto 10m height of building shall be included in the quoted rate. (d) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (e) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (f) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (g) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (h) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. 15% amount of this item will be retained in FB for a period of 05 years from the certified date of completion. (j) Masking of windows / doors during spray painting using polythene film is inluded in the quoted rates. (k) Cleaning and clearing of site of painting, mats etc after completion of work is included in the quoted rate.

Material and labour for two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltr (unndiluted) /10 sqm diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as specified and directed.

NOTES :- (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) The cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. 15% amount of this item will be retained in FB for a period of 05 years from the certified date of completion. (h) Masking of windows / doors during spray painting using polythene film is inluded in the quoted rates. (j) Cleaning and clearing of site of painting, mats etc after completion of work is included in the quoted rate.

Taking down cement plaster or cement lime plaster of any description on brick work, conrete work or stone walls including raking out joints, hacking for key and scrubbing down with water complete all as specified and directed.

Material and labour for rendering 15mm thick in CM 1:6 on brick or concrete surface, finished even and fair without using extra cement, complete all as specified and directed.

Material and labour for rendering 15mm thick in two layers (10mm thick backing layer + 5mm thick top layer) in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, chajja, fins, facia etc upto 3 stories height, mixed with water proofing compound (ISI marked) @ 3% by weight of cement mixed in 5mm thick top layer or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and as direted. (Make - Fosroc renderec HS extra single component, SICA TOP 120 HS) NOTE:- (i) Supply only water proofing compound shall be measured and paid separately under relevant items. (ii) Cost of scaffolding upto 3 stories height of building is included in quoted rate.

Supply only integral water proofing compound complete all as specified and directed

Material and labour for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling, finished even & smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

NOTES :- (a) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application). (b) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (c) The cost of scaffolding upto 10m height of building shall be included in the quoted rate. (d) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (e) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (f) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (g) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (h) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. 15% amount of this item will be retained in FB for a period of 05 years from the certified date of completion. (j) Masking of windows / doors during spray painting using polythene film is inluded in the quoted rates. (k) Cleaning and clearing of site of painting, mats etc after completion of work is included in the quoted rate.

Material and labour for preparation of new wall surafces and applying two finishing coats of acrylic emulsion paint, anti fungal resistance, dirt resistance exterior paint of required shade, over and including one coat of primer applied over and including 1 mm thick exterior putty on new surfaces of walls complete all as specified and directed.

Material and labour for preparation of surfaces and applying two coats of oil bound distemper with roller on new treated surfaces of ceiling etc. complete all as specified and directed.

Material and labour for preparation of old distempered and painted surfaces of walls inluding Washing, rubbing down and stopping by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of distemper oil emulsion on wall surfaces to achieve smooth surface without visible rush / hair mark complete all as specified and directed.

Material and labour for preparation of old distempered and painted surfaces of walls inluding Washing, rubbing down and stopping by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of distemper oil emulsion on wall surfaces to achieve smooth surface without visible rush / hair mark complete all as specified and directed.

Material and labour for preparation of wall surfaces and applying two coats of oil bound distemper over 1mm thick wall care putty with roller on old treated surfaces of wall etc. complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down, srapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on wall surfaces complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down, srapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of cement base paint on wall surfaces complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down, srapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on wall surfaces complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down, srapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash on wall surfaces complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of ceiling (plastered or unplastered) by brooming down, srapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper on ceiling surfaces complete all as specified and directed.

Material and labour for preparation of old treated surface of ceiling and applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of existing treatment on old decorated surfaces of walls inlcuding washing, rubbing down and stopping by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and leaning with water and applying one coat of acrylic emulsion (exterior weather proof coat) paint of any tint as approved by GE on wall surfaces complete all as specified and directed.

Material and labour for complete removal of existing treatment on wall surfaces and applying two coats of weather proof paint (Exterior Grade) of any tint as approved by GE on wall surfaces, over a coat of alkali resistent primer paint complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of CGI / PGI sheets in roof of any description not otherwise described over 10cm width or girth and applying one coat of ANTI-CORROSIVE PAINT over roof sheet complete all as specified and directed.

Material and labour for preparation of PREVIOUSLY UN-TREATED steel surfaces of CGI / PGI sheets in roof of any description not otherwise described over 10cm width or girth by coating with mordant solution including washing and cleaning and applying two coats of ANTI-CORROSIVE PAINT over a coat of red-oxide primer on roof sheet complete all as specified and directed.

Material and labour for preparation of old painted steel surfaes of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old treated wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old treated wood or wood based surfaces of any description not otherwise described n.exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted surfaces of (BRICK, STONE, CONCRETE, ASBESTOS CEMENT OR PLASTER SURFACES) any description over 10cm girth or width, not otherwise described and applying one coat of plastic emulsion paint of any tint as approved by GE on wall surfaces complete all as specified and directed.

Material and labour for preparation of old wooden surfaces of any description, width or girth including cleaning and preparing the surfaces and applying two coats of french polish over and including one or more coats of wood filler complete all as specified and directed.

Material and labour for obliterating old writing of any description, not exceeding 0.1 sqm with paint to match existing works complete all as specified and directed.

Material and labour for writing letters or figures (block Roman, Italian or Indian) not exceeding 30 cm height including stops, comma, arrows, brackets, dashes etc on existing sign board (Black or yellow base) including two coats of synthetic enamel paint over a coat white base synthetic enamel paint complete all as specified and directed.

Material and labour for repairing of chajjas / roof projections by taking down cement plaster on concrete surfaces, etc. including raking out joints, hacking for key, scrubbing down with water, etc. providing and including chicken wire mesh of size 20 mm mesh and gauge of wire 25 guage, over exposed concrete surfaces after taking down of plaster, and thereafter rendering 10 mm thick in CM 1:3 and finishing the plastered surfaes even and smooth without using extra cement complete all as specified and directed.

Material & labour for removal of plant / vegetation / bushes growth protruding over walls / roof / parapet of buildings inluding digging out roots upto the required thikness of walls and making the disturbed surfaces good with cement mortar 1:3 including mixing water proofing compound as per manufacturer's instrutions, stacking of serviceable material and removing of unserviceable materialaway from site complete all as specified and directed.

Material and labour for preparation of painted surfaces of (BRICK, STONE, CONCRETE, ASBESTOS CEMENT OR PLASTER SURFACES) any description over 10cm girth or width, not otherwise described and applying one coat of SYNTHETIC ENAMEL paint of any tint as approved by GE on wall surfaces complete all as specified and directed.