Military Engineer Services Tender
View complete overview of Meghalaya MES Tender
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date15 May 2024
Closing Date24 Jun 2024
Tender Amount₹ 2,98,70,000
Costs
EMD
₹ 3,74,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_653848_1Bid Award Id
ViewTender No
8774/SHL/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.
87
-
-
Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and directed.
6
-
-
Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground lever) complete all as specified and as directed.
85
-
-
Dismantling boarding ,aluminium partitions any description fixed in any position with nails etc complete all as specified and directed.
260
-
-
Dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed.
2150
-
-
S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick as in roof covering of tensile strength 550 mpa including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed
2435
-
-
S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick as in roof covering of tensile strength 550 mpa including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed
120
-
-
S&F 20 mm thick 2nd class hard wood boarding in eaves board/fascia plained one side with butt joints fixed with nails complete all as specified.
140
-
-
M&L Preparation surface of wood and wood based material new or old of any description and girth and treated with two coats of creosote oil complete ,
360
-
-
S&F Anodised Aluminium frame work for snap grid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness Aluminium frame will be 60 x 60 cm to recieve ceiling board complete all as specified and as directed .
1300
-
-
M&L for 4mm E boards 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed.
1300
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
2667
-
-
M&L for Non Skid joint free coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.
1087
-
-
M&L for Non Skid joint free coloured Ceramic tiles 7 to 8 mm thick ( square/rectangular)area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 10 mm thick rendering in CM (1:4). complete all as specified and directed.
30
-
-
M&L for Glazed ceramic coloured tiles in vertical surface of size 450 x 300 x 7mm/300x600x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour over 10mm thick backing coat in CM 1:4 complete as specified and directed
1130
-
-
M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed
150
-
-
M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified and as directed
8
-
-
M&L for outdoor coloured dark shade vitrified paving tiles, joint free(edge cut) of size 300x300x8 to 10mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed
230
-
-
M&L for outdoor coloured dark side vitrified paving tiles, joint free(edge cut) of size 300x300x8 to 10mm thick as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement over 10mm thick rendering in CM 1:4 complete all as specified and as directed
10
-
-
M&L 25 mm thick PCC 1:2:4 type B1 (20 mm graded aggregtae) as in sub floors and simmilar wok complete all as specified and as directed.
1450
-
-
M&L 20-25 mm thick machine cut kota stone flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl. rubbing and mirror polishing laid over 20mm thick cement screed in CM 1:6.
950
-
-
All as per item above but on vertical surface over 15 mm thick rendering in CM(1:4).
50
-
-
M&L 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in path, plinth protection, sub-floors etc finished even and fair or even and rough as reqd complete all as specified and directed
550
-
-
M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in counter fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed.
35
-
-
Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete
70
-
-
S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators and partition plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed
550
-
-
S&F powder coated(powder coating min 50 micron) anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified
30
-
-
S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified
25
-
-
S&F Sheet glass, 5.50mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading complete all as specified and directed
35
-
-
M&L for solar control film/ film with geometric design 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.
27
-
-
M&L 12mm thick prelaminated particle board, interior grade prelaminated both side with decorative choice laminations ,fixed with screw etc complete all as specified and directed.
23
-
-
M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed.
4.85
-
-
S&F 40 mm thick Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete
70
-
-
S&F 35mm thick 2nd class hard wood skelton shutters open rebated and prepare to receive glass, gauze, etc devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified and directed.
46
-
-
M&L 30mm thick 2nd class hard wood factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and directed.
104
-
-
S&F in repairs steel window witth side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetaled or welded complete all as specified and directed
20
-
-
S&F in repairs in steel ventilator with top hung shutter with or without glazing bar, incl hinges, fixing lugs, steel peg stay, complete all as specified and directed.
6
-
-
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.
104
-
-
M/L 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pan.
33
-
-
Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including taking out old wooden beads complete all as specified and directed.
9
-
-
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.
15
-
-
S&F 12 mm thick block boards grade 1 quality exterior grade , commercial type fixed with screws to timber frame.
40
-
-
S&F 0.90 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified
85
-
-
S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165all as specified and as directed
750
-
-
M&L for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws as in cabinet / cup-board completed all as specified and directed.
20
-
-
S&F Continuous (Piano) hinges, mild steel , bright finish or electrogalvanised , width of flaps 30 mm (when open) complete all as specified and directed.
75
-
-
S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed
50
-
-
S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete
241
-
-
S/F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site as per specification & drawing.
64
-
-
S&F Butt hinges of 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-21 complete all as specified and directed.
270
-
-
S&F Extruded Aluminium, anodised, handles of size 150mm complete all as specified and directed.
504
-
-
S&F Extruded Aluminium, anodised, handles of size 100mm complete all as specified and directed.
63
-
-
S&F aluminium anodised barrel bolts and fixed of 200 mm length complete all as specified and directed.
348
-
-
S&F aluminium anodised barrel bolts and fixed of 150 mm length complete all as specified and directed.
153
-
-
S&F 300mm long aliminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts ans sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
414
-
-
S&F extruded fancy type Brass handles fabricated type of size 100 mm complete
60
-
-
S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
8
-
-
S&F Butt hinges of 125mm size, extruded brass, with mild steel hinges pin, bright polished and fixed type B-11.
51
-
-
S&F extruded fancy type Brass handles fabricated type of size 150 mm complete all as specified and directed.
24
-
-
S&F Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of 200 mm length complete all as specified and directed.
12
-
-
S&F 300mm long Brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.
6
-
-
S&F Brass 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
12
-
-
M&L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed.
22
-
-
S&F in repairs PVC (SWR) Pipes single socketed in any length with rubber ring joints, 110 mm bore fixed to walls/floor.
450
-
-
S&F in repair PVC(SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed to walls/floor complete including clamps for securing pipe.
120
-
-
S&F PVC (SWR) bends, any radius, 110 mm bore .
114
-
-
S&F PVC (SWR) bends, any radius, 75 mm bore .
46
-
-
S&F in repair 75mm dia PVC (SWR) floor trap with CP grating, including jointing to pipe .
84
-
-
S&F in repair PVC (SWR) junction single, (Single T) provided with access door, any radius, 110 mm bore complete all as specified and directed.
64
-
-
S&F in repair PVC (SWR) branch piece, single, (Single Y), any radius, 110 mm bore .
16
-
-
S&F in repair brass body CP Tubular towel rail 20mm dia 450mm long complete all as specified and directed..
12
-
-
Taking up or down steel tubing and connections for 15 mm bore of pipes .
380
-
-
Taking up or down steel tubing and connections for 20 mm bore of pipes.
370
-
-
Taking up or down steel tubing and connections for 25 mm bore of pipes .
195
-
-
S&F GI steel tubing medium grade 15mm bore with all fitting and fixed complete to wall and ceiling or laid under in floor complete all as specified and directed.
380
-
-
S&F GI tubes, medium grade galvanised, 20mm bore with all fitting and fixed complete to wall and ceilings or laid in floors complete all as specified and directed.
370
-
-
S&F GI steel tubing medium grade 25mm bore with all fitting and fixed complete to wall and ceiling or laid under in floor complete all as specified and directed.
195
-
-
S&F in repairs Vitreous China Wash Hand Basins, size 550 X 400 mm (Flat Back or Angle Back type) including Pillar Taps 15mm Bore Cast Copper Alloy with Capstan Heads, Chromium Plated, fancy type, 32mm dia Brass Chromium Plated Waste Fitting and PVC connection pipe of 15mm x 600mm long, a Pair of Angle iron Brackets duly Painted/Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3.
18
-
-
S&F in repair Health faucet (ABS Body) mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
40
-
-
S&F in repair Water closet Pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chroimum plated or aluminised hinging device complete all as specified and directed.
4
-
-
S&F in repair PVC valveless, syphonic action type flushing cistern, low level, white, 10 Ltr capacity with inlet, ball valve, float and handle including brackets complete all as specified and directed.
40
-
-
S&F in repair Bip tap, chromium plated, 15mm fancy type,complete all as specified and directed.
79
-
-
S&F in repair Angular stop cock, fancy type, chromium plated, 15 mm bore complete all as specified and directed.
97
-
-
S&F in repair Stop cock (Concealed type), fancy type, chromium plated with long shank and cup, 15 mm bore complete all as specified and directed.
25
-
-
S&F Swivel shower chromium plated with shower arm 15mm size, 195mm long with bend of 45degree with flange for fixing with 15mm pipe complete all as specified.
20
-
-
S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.
99
-
-
S&F in repair 600mm x 450mm beveled edge mirror of selected quality, glass 5mm thick, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
20
-
-
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
7
-
-
M&L for precast type B1 RCC 1:2:4 (using 20mm graded stone aggregate) as in cover slabs, shelves and similar articles set in CM (1:6) including necessary form work complete all as specified and directed.
6
-
-
M&L for Mild steel TMT deformed bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed.
470
-
-
S&F cutting chases, pinning in brick walls work making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth.
370
-
-
S&F in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
31
-
-
S&F in repairs Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
22
-
-
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs incl taking down old unservicable tank of any description and in any position complete all as specified and directed.
31
-
-
S&F in repair ball valve of size 25mm, high pressure, with polyethene float and fly nut, screwed for iron pipe complete all as specified and directed.
31
-
-
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes incl bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460 mm bowl size 410mmx360mmx160 mm complete
2
-
-
M/L precast cement concrete block masonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified.
52
-
-
M & L for PCC type B1 1:2:4 (Using 20 mm graded aggr) as in coping and similar works incl necessary from work all as specified.
0.8
-
-
M & L for type C2 PCC 1:3:6 (40 mm graded aggregate) as in surface channels and drains all as specified & directed.
2.6
-
-
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds,mitred/ stop ends
160
-
-
M&L Precast cement concrete block masonry with solid block 10 Cm thick with PCC, type C1 (1:3:6, using 20mm graded stone aggregate) (with plain or interlocking joints and setting in CM 1:4 complete all as specified and directed.
40
-
-
Taking down cement plaster including racking out joints, hacking for key scrubbing down with water etc including removal of rubbish material from site.
1100
-
-
M&L Rendering, 15 mm thick in CM 1:4, in two layers, first 5 mm thick with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a coat of 10 mm thick base coat finished even and smooth complete all as specified and as directed by Engineer-in-Charge.
Note : WPC shall be measured and paid separately.
640
-
-
M&L for 10 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement.
560
-
-
M&L for 5mm thick plaster in cm (1:3) on fair faces of concrete surfaces of ceiling including finishing even & smooth without using extra cement.
330
-
-
Supply only for water proofing compound.
43
-
-
M&L for White wash, three coats over new plastered ceiling surfaces including necessary preparation of surfaces .
280
-
-
M&L for White wash, three coats over new plastered wall surfaces including necessary preparation of surfaces.
80
-
-
M&L Complete removal of existing treatment on old wall surfaces and applying three coats of white wash.
160
-
-
M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete.
580
-
-
Complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete.
3350
-
-
M & L for complete removal of old ceiling surfaces and applying two coats of white washing over a coat of chalk whiting.
340
-
-
M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
750
-
-
Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.
3350
-
-
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including one coat 1.5mm thick wall care putty. Note- (a) Primer and emulsion application to be carried out through air less spray machine ( Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied) (b) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (c) Cost of scafolding upto 10m hight of building is included in this item.
(d.) The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. (e) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years.
4000
-
-
Repair to damaged roof after complete removal existing treatment including padding, cleaning, the surface using wire brush brooming down and appplying the following treatment all as directed in order of precedence as stated:-
(i) Rendering 15mm thick in Cm (1:4) on existing roof surface true to level after applying cement slurry @ 3Kg/Sqm.
(ii) Applying one coat of bituminious primer . (Note :- Bituminous primer shall be 'TANK MASTIC' manufactured by M/s STP Ltd or "EMUFALTE" manufactured by M/s Texsa India Ltd)
(iii) supply and laying 3mm thick APP based polymeric membrance of approved manufactured with weight not less than 3.00 Kgs Sqm reinforced with non-woven polyester febric weight not less than 150gms peer Sqm. Polymeric membrance shall be taken to a height of 3cm (minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrance flashing.
(iv) Applying one coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm. Note :- (i) Laying APP based polymeric membrance shall be done torch on method as per manufacturers instructions.
(ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrance respectively and sealed all overlaps and joints as per manufacturers instructions. (iii) APP based polymeric membrance shall be "SUPER THERMOLAY" manufactured by M/s STP Ltd of "MOPLY FP 3mm" manufactured by M/s Texas India Ltd & equivalent of Shivam Tar product.
600
-
-
Dismantling post or strut (Wood, steel, RCC) any section incl taking out embeded portion by demolition of cement concrete in fdn and making good the disturbed portion of ground, complete all as specified.
90
-
-
Excavation in post holes not exc. 0.5 cum, getting out returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete in soft/loose soil.
83
-
-
M & L PCC 1:3:6 type C2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete.
12
-
-
M&L for roof truss (framed), trussed, purlins etc of angle or other section for fixing of sheet and similar fixing complete all as specified.
8600
-
-
S&F bands, straps, plates, angle cleats for securing purlins to wood or tubular trusses or rafters, wind ties etc conforming to Fe 410-0 or Fe 310-0
200
-
-
M&L for preparation of new steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat red oxide primer all as specified.
350
-
-
M&L for taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces by washing down with water and rubbish off the premises.
(a) Cleaning and filling cracks and sealing compound, brushing neat with neat cement slurry @ 3.00 Kg/Sqm and grouting in 25mm thick plain cement mortar 1:2:4 type B-o (using 12.5mm graded stone aggregate) over sunken slab portion and finishing the top surfaces even and smooth without using extra cement .
(b) M&L two coats of acrylic cementtious water proofing coating (Dr Fixit Pidifin 2K manufactured by M/s Pidilite industries Ltd or equivalent make as approved by GE and followed by a overlay protective 15mm thick screed/rendering in CM 1:3 along with liquid water proofing at appropriate ratio of approved make on top surfaces of sunken slab after preparation as mentioed above. Method of application for acrylic cementitious water proofing coating is forwarded as per manufactures instructions.
16
-
-
S&F in repairs Vitreous China Urinal, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; also including brass chromium plated waste coupling 32mm dia, and waste pipe with grating and union for discharge pipe complete all as specified and directed.
8
-
-
S&F in repair Urinal spreader of chroumium plated any for fixing with 15 mm dia pipe complete all as specified and directed.
8
-
-
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-l smooth finished, and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed
6
-
-
Demolition and breaking up drain pipes 150 mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
50
-
-
S&F High density polyethylene pipes (HDPE 'B' grade) 160mm dia of pressure rating 6 kgf/cm2 laid in trenches etc complete all as specified and as directed.
50
-
-
M&L for 1:3:6 type C-2 PCC bed to 150mm bore of pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in ®
50
-
-
M&L Venetian blind for windows 100mm wide slats made of fabrics, including head and bottom rail made up of powder coated anodised aluminium frame, water proof cord tilter, tape ladder,sliding hooks and pully of any colour with all fixing arrangement complete all as specified and directed.
20
-
-
M&L for machine pressed pre polished chequered cement concrete tiles 400 X 400 X 25mm thick over 15mm thick screed bed in CM 1:4 set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor complete all as specified
270
-
-
Dismantling of timber scantling 40 sqcm and over in section in any position unframed work.
4.5
-
-
Dismantling of timber scantling in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section in any position complete all as specified and directed.
180
-
-
M&L 2nd class hard wood in scantling clean sawn timber fixed complete .
6
-
-
M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.
190
-
-
Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered).
300
-
-
M&L for rendering 10mm thick on on one side of lathing in CM 1:6 finished even and smooth without using extra cement .
150
-
-
M&L for rendering 15 mm thick on other side of lathing in CM 1:4 finished even and smooth without using extra cement using water proofing compound @ 3% complete.
150
-
-
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete.
25
-
-
Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point
10
-
-
Returning and filling including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil
15
-
-
Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil.
150
-
-
M&L Hardcore using broken stone boulders gauge n exc 63mm, deposited spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface.
20
-
-
M&L 100mm thick cement concrete using (40mm graded aggregate) type D-2 (1:4:8) as in sub base.
250
-
-
M & L 75mm thick PCC 1:2:4 type B2 as in subfloors finished even and rough without using extra cement .
250
-
-
MS work for screws bolts 5 to 10mm dia of neck (Machine made) with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with wasahers and square nut, exc. 5 cm and n. exc. 10 cm long diameter of shank 11 to 15 mm complete all as specified and directed.
120
-
-
S&F Mortice lock, vertical type 100mm 4 levers brass complete all as specified Make : Godrej and equivalent
16
-
-
S&F in repair Steel rolling shutters 1.25mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated in position as indicated, complete push pull or manual type as in repairs.
24
-
-
S&F ball bearing for rolling shutters complete all as specified.
4
-
-
S&F Safety lever locks mild steel with 4 levers for rolling shutters.
4
-
-
S&F Collapsible gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, errected in position and securing runners with holdfasts and brackets complete.
30
-
-
M&L for preparation of new plastered ceiling surafces and applying two finishing coat of oil bound distempering .
50
-
-
Complete removal of existing treatment on old ceiling surfaces and applying two finishing coat of oil bound distempering .
574
-
-
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement
100
-
-
S&F in repairs bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commericial ply wood and fixed to wooden plugs with CP brass screw and cup washer.
2
-
-
M&L 12 mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete with all fittings/ washers/handlesand bolts complete all as specified and directed.
8
-
-
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment.
10
-
-
M&L for Stone finish Glazed ceramic coloured tiles for out door wall cladding in vertical surface of size 300x200/600x300/300x450mm, 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour over 10mm thick backing coat in CM 1:4 .
50
-
-
M&L for dark shade /double charged/ultracharged vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4.
165
-
-
M&L for dark shade /double charged/ultracharged vitrified ceramic tiles10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 .
20
-
-
M&L Acoustic wall Penalling Gloss Tile made up of 'wood fiber cement composite' 15mm thick covered with Acoustically Transparent Absorptive microfibers on the front side with an option of colors of size 595 x 595/ 595 x 1195mm having excellent noise absorption of 0.85 NRC as per ISO 354. Fire Ratings as per BS 476 Part 5,6 and 7 class I and P, water resistant and thermal insulated, Installed on T24 grid system of 0.6mm thick main 'T' length minimum 3000mm, web minimum 35mm to be placed at 600mm center to center and secondary cross 'T' of length 600mm web minimum 35mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, with a backing of 50mm 1000GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results.
300
-
-
S&F in repairs 2nd class hard wood boarding 40mm thick in floor and skirting planned one side, with butt joints and fixed with nails .
100
-
-
M&L 25 mm thick PCC 1:2:4 type B-O (12.5 mm graded aggregtae) as in floors finishing cement concrete surface even and smooth without using extra cement .
300
-
-
M&L 5mm thick Rubber sheet with fabric backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive .
300
-
-
S&F Solid PVC wall lining, consisting of 5mm thick plain colour PVC Sheet inclusive of solvent cement and fixing at site on PVC Frame as per specification .
200
-
-
M&L 5mm thick PVC sheet filled of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification .
200
-
-
Taking down and refixing of existing chairs after tiling work complete all as specified and directed.
400
-
-
S&F in repair Vitreous China, semi-pedestal pattern (Anglo Indian Type, white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chroimum plated or aluminised hinging device c.
36
-
-
S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580 X 440 mm white, with integral foot rests including provision of lime concrete bedding, fixing of flushing cistern .
3
-
-
S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with J or L type hook and washers, in roofs, walls etc. with grade of zinc coating 120 GSM complete .
59
-
-
S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120 GSM complete .
15
-
-
E/M PORTION: Taking down carefully aluminium/copper conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.
832
-
-
Material and labour point wiring for one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including suitable size PVC conduit and fittings of medium grade, including pressed steel / PVC terminal switch boxes fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.
487
-
-
All as per item No.2 above but One 3 pin 5 Amps socket out let points on independent board
176
-
-
All as per item No.2 above but 5 Amp socket on same board with other switches.
44
-
-
Material and labour point wiring for light point/ fan point, 05 light point controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FR cables in and including suitable size PVC conduit and fittings of medium grade, including including pressed steel / PVC terminal switch boxes fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectional area multistranded copper conductor FR PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.
11
-
-
Material and labour point wiring for power point controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FR cables in and including 20 mm width or higher size PVCconduit and fittings of medium grade, including including pressed steel / PVC terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FR PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.
140
-
-
Supply and fixing submain wiring for DBs/ Power Point, two single core ,2.5 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked) including 2.5 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. (Will be used for submain wiring for ceiling lights connection and 15 A SSC Point wiring for more than 8 mtr length)
200
-
-
Supply and fixing submain wiring for DBs/ Power Point, two single core ,4 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked) including 4 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified.
1270
-
-
Supply and fixing submain wiring for DBs/ Power Point, two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and Including suitable size PVC conduit (ISI marked) including 6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified.
300
-
-
Supply and fix Modular switch 1 way 6A, 1 module, 230 V
272
-
-
Supply and fix Socket, Modular 6A - 2/3 pin combined 2 module 230 V complete all as specified and as directed.
100
-
-
Supply and fix socket modular 6A/16 A -2/3 pin combined 2 module 230 V complete all as specified and as directed
60
-
-
Supply and fix Modular switch 1 way 16A, 6 pin, 1 module 230 V complete all as specified and as directed.
60
-
-
S & F modular metal flush box 3 module
20
-
-
S & F modular white cover plate with frame 8 module
12
-
-
S & F modular white cover plate with frame 6 module
8
-
-
S & F modular white cover plate with frame 4 module
6
-
-
S & F modular white cover plate with frame 3 module
160
-
-
Supply and fix switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.
350
-
-
Supply and fix switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.
96
-
-
Supply and fix socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed. (For Same Board only)
24
-
-
Supply and fix switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified.
80
-
-
Supply & fix ceiling rose surface 65 mm x 32 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.
303
-
-
Supply and fix in repair Bldg security light fittings 35 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories pipe with clamps,nut bolts etc. including connected with twin core twisted flexible copper conductor of suitable size and complete all as directed.
28
-
-
Supply and fix 18 W LED light fitting wall mounted batten 4'ft , extruded aluminium housing, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 20 watt,6000K including necessary connection complete all as specified and directed.
212
-
-
Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
78
-
-
Supply and fixing in repair round/rectangular shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
41
-
-
Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
20
-
-
S & F in repair Spot light LED fitting 8 watt, 230 V AC, outdoor type 3000/4000 K with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.
10
-
-
Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp
7
-
-
Supply & fix lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified.
110
-
-
Supply and fix LED Bulb 09 Watt suitable for baten holder complete all as specified and directed.
110
-
-
Supply and fix Vertical distribution board double door VTPN 6 way with IP 43 multiphase outgoing suitable for mounting 100 Amps MCCB as incomer with Bus bars, Neutral links complete with all accessories complete all as directed.
1
-
-
Supply and fix Vertical distribution board double door VTPN 4 way with IP 43 multiphase outgoing suitable for mounting 63 Amps MCCB as incomer with Bus bars, Neutral links complete with all accessories complete all as directed.
3
-
-
Supply and fix Vertical distribution board double door MCB TPN 4 way with IP 43 multiphase outgoing suitable for mounting 63 Amps MCB as incomer with Bus bars, Neutral links complete with all accessories complete all as directed.
3
-
-
Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.
25
-
-
Supply and fix MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed.
200
-
-
Fixing of serviceable MCB obtained from above item all as directed
30
-
-
Supply and fix MCB SPN 40 - 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.
25
-
-
Supply and fix MCB TPN 40 - 100 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.
3
-
-
Supply and fix MCCB of 4 pole , 415volts of capacity 100 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessary connection complete all as specified and directed.
1
-
-
Supply and fix MCCB of 4 pole , 415volts of capacity 63 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessary connection complete all as specified and directed.
3
-
-
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers
26
-
-
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers
10
-
-
Dismantling of Stage curtain machine system including taking down curtains and fixtures for ceiling work and refixing the same to its original position after ceiling work completes.
1
-
-
Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.
14
-
-
Supply and fix Air termination, single pointed, Aluminium rod 12mm dia and 300mm long complete all as specified and directed.
30
-
-
Supply and fix Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.
10
-
-
Material and labour for earthing complete with Copper earth plate electrode 60 Cm X 60 Cm X 3.15 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to Copper Earth strip of size 20x3 mm by means of bolts, check nuts and washers ,galvanised steel/brass and protected by GI pipe 40 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.
20
-
-
Supply and fix Air termination, single pointed, Aluminium rod 12mm dia and 300mm long complete all as specified and directed.
30
-
-
Supply and fix Aluminium strip 25 mm x 3 mm with saddles and fixing screws etc. for roof conductors and down conductors in saddles above ground complete all as specified and directed.
400
-
-
Supply and fix Galvanised iron strip 32 x 6mm buried in ground as ring main conductor including porcelein insulated clamps complete all as specified and directed
120
-
-
Supply and fix Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.
10
-
-
S & F Junction Box made of polycarbonate of size 130 x 130 x 77 mm suitable for mounting test terminal block including 04 Nos fasteners all as directed.
20
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements